Changes in / [32bcef7:f674479]
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
doc/generic_types/generic_types.tex
r32bcef7 rf674479 137 137 & 2017 & 2012 & 2007 & 2002 & 1997 & 1992 & 1987 \\ 138 138 \hline 139 Java & 1 & 1 & 1 & 3 & 13& - & - \\139 Java & 1 & 1 & 1 & 1 & 12 & - & - \\ 140 140 \hline 141 \Textbf{C} & \Textbf{2}& \Textbf{2}& \Textbf{2}& \Textbf{ 1}& \Textbf{1}& \Textbf{1}& \Textbf{1} \\141 \Textbf{C} & \Textbf{2}& \Textbf{2}& \Textbf{2}& \Textbf{2}& \Textbf{1}& \Textbf{1}& \Textbf{1} \\ 142 142 \hline 143 143 \CC & 3 & 3 & 3 & 3 & 2 & 2 & 4 \\ … … 179 179 int val = twice( twice( 3.7 ) ); 180 180 \end{lstlisting} 181 which works for any type @T@ with a matching addition operator. The polymorphism is achieved by creating a wrapper function for calling @+@ with @T@ bound to @double@, then passing this function to the first call of @twice@. There is now the option of using the same @twice@ and converting the result to @int@ on assignment, or creating another @twice@ with type parameter @T@ bound to @int@ because \CFA uses the return type (as in~\cite{Ada}) in its type analysis. The first approach has a late conversion from @int@ to @double@ on the final assignment, while the second has an eager conversion to @int@. \CFA minimizes the number of conversions and their potential to lose information, so it selects the first approach, which corresponds with C-programmer intuition. 181 which works for any type @T@ with a matching addition operator. The polymorphism is achieved by creating a wrapper function for calling @+@ with @T@ bound to @double@, then passing this function to the first call of @twice@. There is now the option of using the same @twice@ and converting the result to @int@ on assignment, or creating another @twice@ with type parameter @T@ bound to @int@ because \CFA uses the return type (as in~\cite{Ada}) in its type analysis. 182 The first approach has a late conversion from @double@ to @int@ on the final assignment, while the second has an eager conversion to @int@. \CFA minimizes the number of conversions and their potential to lose information, so it selects the first approach, which corresponds with C-programmer intuition. 182 183 183 184 Crucial to the design of a new programming language are the libraries to access thousands of external software features. … … 204 205 int posn = bsearch( 5.0, vals, 10 ); 205 206 \end{lstlisting} 206 The nested routine @comp@ (impossible in \CC as lambdas do not use C calling conventions) provides the hidden interface from typed \CFA to untyped (@void *@) C, plus the cast of the result. 207 The nested routine @comp@ provides the hidden interface from typed \CFA to untyped (@void *@) C, plus the cast of the result. 208 Providing a hidden @comp@ routine in \CC is awkward as lambdas do not use C calling-conventions and template declarations cannot appear at block scope. 207 209 As well, an alternate kind of return is made available: position versus pointer to found element. 208 210 \CC's type-system cannot disambiguate between the two versions of @bsearch@ because it does not use the return type in overload resolution, nor can \CC separately compile a templated @bsearch@. … … 275 277 return total; } 276 278 \end{lstlisting} 277 A trait name plays no part in type equivalence; it is solely a macro for a list of assertions.278 Traits may overlap assertions without conflict, and therefore, do not form a hierarchy.279 279 280 280 In fact, the set of operators is incomplete, \eg no assignment, but @otype@ is syntactic sugar for the following implicit trait: … … 308 308 % \end{lstlisting} 309 309 310 Traits may be used for many of the same purposes as interfaces in Java or abstract base classes in \CC. Unlike Java interfaces or \CC base classes, \CFA types do not explicitly state any inheritance relationship to traits they satisfy, which is a form of structural inheritance, similar to the implementation of an interface in Go~\citep{Go}, as opposed to the nominal inheritance model of Java and \CC. 311 312 Nominal inheritance can be simulated with traits using marker variables or functions: 313 \begin{lstlisting} 314 trait nominal(otype T) { 315 T is_nominal; 310 The \CFA type-system uses \emph{nominal typing} for concrete types, matching with the C type-system. and \emph{structural typing} for polymorphic types. 311 Hence, trait names play no part in type equivalence; 312 the names are simply macros for a list of polymorphic assertions, which are expanded at usage sites. 313 Nevertheless, trait names form a logical subtype-hierarchy with @dtype@ at the top, where traits often contain overlapping assertions. 314 Traits are used like interfaces in Java or abstract base-classes in \CC, but without the nominal inheritance-relationships. 315 Instead, each polymorphic function (or generic type) defines the structural type needed for its execution (polymorphic type-key), and this key is fulfilled at each call site from the lexical environment, which is similar to Go~\citep{Go} interfaces. 316 Hence, new lexical scopes and nested functions are used extensively to create local subtypes, as in the @qsort@ example, without having to manage a nominal-inheritance hierarchy. 317 (Nominal inheritance can be approximated with traits using marker variables or functions, as is done in Go.) 318 319 % Nominal inheritance can be simulated with traits using marker variables or functions: 320 % \begin{lstlisting} 321 % trait nominal(otype T) { 322 % T is_nominal; 323 % }; 324 % int is_nominal; $\C{// int now satisfies the nominal trait}$ 325 % \end{lstlisting} 326 % 327 % Traits, however, are significantly more powerful than nominal-inheritance interfaces; most notably, traits may be used to declare a relationship \emph{among} multiple types, a property that may be difficult or impossible to represent in nominal-inheritance type systems: 328 % \begin{lstlisting} 329 % trait pointer_like(otype Ptr, otype El) { 330 % lvalue El *?(Ptr); $\C{// Ptr can be dereferenced into a modifiable value of type El}$ 331 % } 332 % struct list { 333 % int value; 334 % list *next; $\C{// may omit "struct" on type names as in \CC}$ 335 % }; 336 % typedef list *list_iterator; 337 % 338 % lvalue int *?( list_iterator it ) { return it->value; } 339 % \end{lstlisting} 340 % In the example above, @(list_iterator, int)@ satisfies @pointer_like@ by the user-defined dereference function, and @(list_iterator, list)@ also satisfies @pointer_like@ by the built-in dereference operator for pointers. Given a declaration @list_iterator it@, @*it@ can be either an @int@ or a @list@, with the meaning disambiguated by context (\eg @int x = *it;@ interprets @*it@ as an @int@, while @(*it).value = 42;@ interprets @*it@ as a @list@). 341 % While a nominal-inheritance system with associated types could model one of those two relationships by making @El@ an associated type of @Ptr@ in the @pointer_like@ implementation, few such systems could model both relationships simultaneously. 342 343 344 \section{Generic Types} 345 346 One of the known shortcomings of standard C is that it does not provide reusable type-safe abstractions for generic data structures and algorithms. Broadly speaking, there are three approaches to create data structures in C. One approach is to write bespoke data structures for each context in which they are needed. While this approach is flexible and supports integration with the C type-checker and tooling, it is also tedious and error-prone, especially for more complex data structures. A second approach is to use @void *@--based polymorphism. This approach is taken by the C standard library functions @bsearch@ and @qsort@, and does allow the use of common code for common functionality. However, basing all polymorphism on @void *@ eliminates the type-checker's ability to ensure that argument types are properly matched, often requiring a number of extra function parameters, pointer indirection, and dynamic allocation that would not otherwise be needed. A third approach to generic code is to use pre-processor macros, which does allow the generated code to be both generic and type-checked, but errors may be difficult to interpret. Furthermore, writing and using preprocessor macros can be unnatural and inflexible. 347 348 Other languages use \emph{generic types}, \eg \CC and Java, to produce type-safe abstract data-types. \CFA also implements generic types that integrate efficiently and naturally with the existing polymorphic functions, while retaining backwards compatibility with C and providing separate compilation. However, for known concrete parameters, the generic type can be inlined, like \CC templates. 349 350 A generic type can be declared by placing a @forall@ specifier on a @struct@ or @union@ declaration, and instantiated using a parenthesized list of types after the type name: 351 \begin{lstlisting} 352 forall( otype R, otype S ) struct pair { 353 R first; 354 S second; 316 355 }; 317 int is_nominal; $\C{// int now satisfies the nominal trait}$ 318 \end{lstlisting} 319 320 Traits, however, are significantly more powerful than nominal-inheritance interfaces; most notably, traits may be used to declare a relationship \emph{among} multiple types, a property that may be difficult or impossible to represent in nominal-inheritance type systems: 321 \begin{lstlisting} 322 trait pointer_like(otype Ptr, otype El) { 323 lvalue El *?(Ptr); $\C{// Ptr can be dereferenced into a modifiable value of type El}$ 324 } 325 struct list { 326 int value; 327 list *next; $\C{// may omit "struct" on type names as in \CC}$ 328 }; 329 typedef list *list_iterator; 330 331 lvalue int *?( list_iterator it ) { return it->value; } 332 \end{lstlisting} 333 334 In the example above, @(list_iterator, int)@ satisfies @pointer_like@ by the user-defined dereference function, and @(list_iterator, list)@ also satisfies @pointer_like@ by the built-in dereference operator for pointers. Given a declaration @list_iterator it@, @*it@ can be either an @int@ or a @list@, with the meaning disambiguated by context (\eg @int x = *it;@ interprets @*it@ as an @int@, while @(*it).value = 42;@ interprets @*it@ as a @list@). 335 While a nominal-inheritance system with associated types could model one of those two relationships by making @El@ an associated type of @Ptr@ in the @pointer_like@ implementation, few such systems could model both relationships simultaneously. 336 337 \section{Generic Types} 338 339 One of the known shortcomings of standard C is that it does not provide reusable type-safe abstractions for generic data structures and algorithms. Broadly speaking, there are three approaches to create data structures in C. One approach is to write bespoke data structures for each context in which they are needed. While this approach is flexible and supports integration with the C type-checker and tooling, it is also tedious and error-prone, especially for more complex data structures. A second approach is to use @void*@-based polymorphism. This approach is taken by the C standard library functions @qsort@ and @bsearch@, and does allow the use of common code for common functionality. However, basing all polymorphism on @void*@ eliminates the type-checker's ability to ensure that argument types are properly matched, often requires a number of extra function parameters, and also adds pointer indirection and dynamic allocation to algorithms and data structures that would not otherwise require them. A third approach to generic code is to use pre-processor macros to generate it -- this approach does allow the generated code to be both generic and type-checked, though any errors produced may be difficult to interpret. Furthermore, writing and invoking C code as preprocessor macros is unnatural and somewhat inflexible. 340 341 Other C-like languages such as \CC and Java use \emph{generic types} to produce type-safe abstract data types. \CFA implements generic types with some care taken that the generic types design for \CFA integrates efficiently and naturally with the existing polymorphic functions in \CFA while retaining backwards compatibility with C; maintaining separate compilation is a particularly important constraint on the design. However, where the concrete parameters of the generic type are known, there is no extra overhead for the use of a generic type, as for \CC templates. 342 343 A generic type can be declared by placing a @forall@ specifier on a @struct@ or @union@ declaration, and instantiated using a parenthesized list of types after the type name: 344 \begin{lstlisting} 345 forall(otype R, otype S) struct pair { 346 R first; 347 S second; 348 }; 349 350 forall(otype T) 351 T value( pair(const char*, T) p ) { return p.second; } 352 353 forall(dtype F, otype T) 354 T value_p( pair(F*, T*) p ) { return *p.second; } 355 356 pair(const char*, int) p = { "magic", 42 }; 356 forall( otype T ) T value( pair( const char *, T ) p ) { return p.second; } 357 forall( dtype F, otype T ) T value_p( pair( F *, T * ) p ) { return *p.second; } 358 359 pair( const char *, int ) p = { "magic", 42 }; 357 360 int magic = value( p ); 358 361 359 pair( void*, int*) q = { 0, &p.second };362 pair( void *, int * ) q = { 0, &p.second }; 360 363 magic = value_p( q ); 364 361 365 double d = 1.0; 362 pair( double*, double*) r = { &d, &d };366 pair( double *, double * ) r = { &d, &d }; 363 367 d = value_p( r ); 364 368 \end{lstlisting} 365 369 366 \CFA classifies generic types as either \emph{concrete} or \emph{dynamic}. Concrete generic types have a fixed memory layout regardless of type parameters, while dynamic generic types vary in their in-memory layout depending on their type parameters. A type may have polymorphic parameters but still be concrete; in \CFA such types are called \emph{dtype-static}. Polymorphic pointers are an example of dtype-static types -- @forall(dtype T) T*@ is a polymorphic type, but for any @T@ chosen, @T*@ has exactly the same in-memory representation as a @void*@, and can therefore be represented by a @void*@ in code generation.367 368 \CFA generic types may also specify constraints on their argument type to be checked by the compiler. For example, consider the following declaration of a sorted set-type, which ensures thatthe set key supports equality and relational comparison:369 \begin{lstlisting} 370 forall( otype Key | { _Bool ?==?(Key, Key); _Bool ?<?(Key, Key); })371 struct sorted_set; 372 \end{lstlisting} 373 374 \subsection{Concrete Generic 375 376 The \CFA translator instantiates concrete generic types by template-expanding them to fresh struct types; concrete generic types can therefore be used with zero runtime overhead. To enable inter-operation among equivalent instantiations of a generic type, the translator saves the set of instantiations currently in scope and reuses the generated struct declarations where appropriate. For example, a function declaration that accepts or returns a concrete generic type produces a declaration for the instantiated struct in the same scope, which all callers that can see that declaration may reuse. As an example of the expansion, the concrete instantiation for @pair(const char*, int)@ looks like this:370 \CFA classifies generic types as either \emph{concrete} or \emph{dynamic}. Concrete have a fixed memory layout regardless of type parameters, while dynamic vary in memory layout depending on their type parameters. A type may have polymorphic parameters but still be concrete, are called \emph{dtype-static}. Polymorphic pointers are an example of dtype-static types, \eg @forall(dtype T) T *@ is a polymorphic type, but for any @T@, @T *@ is a fixed-sized pointer, and therefore, can be represented by a @void *@ in code generation. 371 372 \CFA generic types also allow checked argument-constraints. For example, the following declaration of a sorted set-type ensures the set key supports equality and relational comparison: 373 \begin{lstlisting} 374 forall( otype Key | { _Bool ?==?(Key, Key); _Bool ?<?(Key, Key); } ) struct sorted_set; 375 \end{lstlisting} 376 377 378 \subsection{Concrete Generic-Types} 379 380 The \CFA translator template-expands concrete generic-types into new structure types, affording maximal inlining. To enable inter-operation among equivalent instantiations of a generic type, the translator saves the set of instantiations currently in scope and reuses the generated structure declarations where appropriate. For example, a function declaration that accepts or returns a concrete generic type produces a declaration for the instantiated struct in the same scope, which all callers may reuse. For example, the concrete instantiation for @pair( const char *, int )@ is: 377 381 \begin{lstlisting} 378 382 struct _pair_conc1 { 379 const char * first;383 const char * first; 380 384 int second; 381 385 }; 382 386 \end{lstlisting} 383 387 384 A concrete generic type with dtype-static parameters is also expanded to a struct type, but this struct type is used for all matching instantiations. In the example above, the @pair(F*, T*)@ parameter to @value_p@ is such a type; its expansion looks something like this, andis used as the type of the variables @q@ and @r@ as well, with casts for member access where appropriate:388 A concrete generic type with dtype-static parameters is also expanded to a structure type, but this type is used for all matching instantiations. In the above example, the @pair( F *, T * )@ parameter to @value_p@ is such a type; its expansion is below and it is used as the type of the variables @q@ and @r@ as well, with casts for member access where appropriate: 385 389 \begin{lstlisting} 386 390 struct _pair_conc0 { 387 void * first;388 void * second;391 void * first; 392 void * second; 389 393 }; 390 394 \end{lstlisting} 391 395 392 396 393 \subsection{Dynamic Generic 394 395 Though \CFA implements concrete generic types efficiently, it also has a fully general system for computing with dynamic generic types. As mentioned in Section~\ref{sec:poly-fns}, @otype@ function parameters (in fact all @sized@ polymorphic parameters) come with implicit size and alignment parameters provided by the caller. Dynamic generic structs also have implicit size and alignment parameters, and also an \emph{offset array} which contains the offsets of each member of the struct\footnote{Dynamic generic unions need no such offset array, as all members are at offset 0; the size and alignment parameters are still provided for dynamic unions, however.}. Access to members\footnote{The \lstinline@offsetof@ macro is implemented similarly.} of a dynamic generic struct is provided by adding the corresponding member of the offset array to the struct pointer at runtime, essentially moving a compile-time offset calculation to runtime where necessary.396 397 The se offset arrays are statically generated where possible. If a dynamic generic type is declared to be passed or returned by value from a polymorphic function, the translator can safely assume that the generic type is complete (that is, has a known layout) at any call-site, and the offset array is passed from the caller; if the generic type is concrete at the call site the elements of this offset array can even be statically generated using the C @offsetof@ macro. As an example, @p.second@ in the @value@ function above is implemented as @*(p + _offsetof_pair[1])@, where @p@ is a @void*@, and @_offsetof_pair@ is the offset array passed in to @value@ for @pair(const char*, T)@. The offset array @_offsetof_pair@ is generated at the call site as @size_t _offsetof_pair[] = { offsetof(_pair_conc1, first), offsetof(_pair_conc1, second) };@.398 399 In some cases the offset arrays cannot be statically generated. For instance, modularity is generally provided in C by including an opaque forward-declaration of a struct and associated accessor and mutator routines in a header file, with the actual implementations in a separately-compiled \texttt{.c} file. \CFA supports this pattern for generic types, and in this instance the caller does not know the actual layout or size of the dynamic generic type, and only holds it by pointer. The \CFA translator automatically generates \emph{layout functions} for cases where the size, alignment, and offset array of a generic struct cannot be passed in to a function from that function's caller. These layout functions take as arguments pointers to size and alignment variables and a caller-allocated array of member offsets, as well as the size and alignment of all @sized@ parameters to the generic struct (un-@sized@ parameters are forbidden from the language from being used in a context that affects layout). Results of these layout functions are cached so that they are only computed once per type per function.%, as in the example below for @pair@.397 \subsection{Dynamic Generic-Types} 398 399 Though \CFA implements concrete generic-types efficiently, it also has a fully general system for dynamic generic types. As mentioned in Section~\ref{sec:poly-fns}, @otype@ function parameters (in fact all @sized@ polymorphic parameters) come with implicit size and alignment parameters provided by the caller. Dynamic generic-types also have an \emph{offset array} containing structure member-offsets. Dynamic generic-union needs no such offset array, as all members are at offset 0 but size and alignment are still necessary. Access to members of a dynamic structure is provided at runtime via base-displacement addressing with the structure pointer and the member offset (similar to the @offsetof@ macro), moving a compile-time offset calculation to runtime. 400 401 The offset arrays are statically generated where possible. If a dynamic generic-type is declared to be passed or returned by value from a polymorphic function, the translator can safely assume the generic type is complete (\ie has a known layout) at any call-site, and the offset array is passed from the caller; if the generic type is concrete at the call site the elements of this offset array can even be statically generated using the C @offsetof@ macro. As an example, @p.second@ in the @value@ function above is implemented as @*(p + _offsetof_pair[1])@, where @p@ is a @void *@, and @_offsetof_pair@ is the offset array passed into @value@ for @pair( const char *, T )@. The offset array @_offsetof_pair@ is generated at the call site as @size_t _offsetof_pair[] = { offsetof(_pair_conc1, first), offsetof(_pair_conc1, second) };@. 402 403 In some cases the offset arrays cannot be statically generated. For instance, modularity is generally provided in C by including an opaque forward-declaration of a struct and associated accessor and mutator routines in a header file, with the actual implementations in a separately-compiled @.c@ file. \CFA supports this pattern for generic types, but caller does not know the actual layout or size of the dynamic generic-type, and only holds it by a pointer. The \CFA translator automatically generates \emph{layout functions} for cases where the size, alignment, and offset array of a generic struct cannot be passed into a function from that function's caller. These layout functions take as arguments pointers to size and alignment variables and a caller-allocated array of member offsets, as well as the size and alignment of all @sized@ parameters to the generic structure (un-@sized@ parameters are forbidden from the language from being used in a context that affects layout). Results of these layout functions are cached so that they are only computed once per type per function. %, as in the example below for @pair@. 400 404 % \begin{lstlisting} 401 405 % static inline void _layoutof_pair(size_t* _szeof_pair, size_t* _alignof_pair, size_t* _offsetof_pair, … … 403 407 % *_szeof_pair = 0; // default values 404 408 % *_alignof_pair = 1; 405 409 % 406 410 % // add offset, size, and alignment of first field 407 411 % _offsetof_pair[0] = *_szeof_pair; 408 412 % *_szeof_pair += _szeof_R; 409 413 % if ( *_alignof_pair < _alignof_R ) *_alignof_pair = _alignof_R; 410 414 % 411 415 % // padding, offset, size, and alignment of second field 412 416 % if ( *_szeof_pair & (_alignof_S - 1) ) … … 415 419 % *_szeof_pair += _szeof_S; 416 420 % if ( *_alignof_pair < _alignof_S ) *_alignof_pair = _alignof_S; 417 421 % 418 422 % // pad to struct alignment 419 423 % if ( *_szeof_pair & (*_alignof_pair - 1) ) … … 421 425 % } 422 426 % \end{lstlisting} 423 424 427 Layout functions also allow generic types to be used in a function definition without reflecting them in the function signature. For instance, a function that strips duplicate values from an unsorted @vector(T)@ would likely have a pointer to the vector as its only explicit parameter, but use some sort of @set(T)@ internally to test for duplicate values. This function could acquire the layout for @set(T)@ by calling its layout function with the layout of @T@ implicitly passed into the function. 425 428 426 Whether a type is concrete, dtype-static, or dynamic is decided based solely on the type parameters and @forall@ clause on the struct declaration. This design allows opaque forward declarations of generic types like @forall(otype T) struct Box;@ -- like in C, all uses of @Box(T)@ can be in a separately compiled translation unit, and callers from other translation units know the proper calling conventions to use. If the definition of a struct type was included in the decision of whether a generic type is dynamic or concrete, some further types may be recognized as dtype-static (\eg @forall(otype T) struct unique_ptr { T* p };@ does not depend on @T@ for its layout, but the existence of an @otype@ parameter means that it \emph{could}.), but preserving separate compilation (and the associated C compatibility) in the existing design is judged to be an appropriate trade-off. 429 Whether a type is concrete, dtype-static, or dynamic is decided solely on the type parameters and @forall@ clause on a declaration. This design allows opaque forward declarations of generic types, \eg @forall(otype T) struct Box@ -- like in C, all uses of @Box(T)@ can be separately compiled, and callers from other translation units know the proper calling conventions to use. If the definition of a structure type is included in deciding whether a generic type is dynamic or concrete, some further types may be recognized as dtype-static (\eg @forall(otype T) struct unique_ptr { T* p };@ does not depend on @T@ for its layout, but the existence of an @otype@ parameter means that it \emph{could}.), but preserving separate compilation (and the associated C compatibility) in the existing design is judged to be an appropriate trade-off. 430 427 431 428 432 \subsection{Applications} 429 433 \label{sec:generic-apps} 430 434 431 The reuse of dtype-static struct instantiations enables some useful programming patterns at zero runtime cost. The most important such pattern is using @forall(dtype T) T*@ as a type-checked replacement for @void*@, as in this example, which takes a @qsort@ or @bsearch@-compatible comparison routine and creates a similar lexicographic comparison for pairs of pointers: 432 \begin{lstlisting} 433 forall(dtype T) 434 int lexcmp( pair(T*, T*)* a, pair(T*, T*)* b, int (*cmp)(T*, T*) ) { 435 int c = cmp(a->first, b->first); 436 if ( c == 0 ) c = cmp(a->second, b->second); 435 The reuse of dtype-static structure instantiations enables useful programming patterns at zero runtime cost. The most important such pattern is using @forall(dtype T) T *@ as a type-checked replacement for @void *@, \eg creating a lexicographic comparison for pairs of pointers used by @bsearch@ or @qsort@: 436 \begin{lstlisting} 437 forall(dtype T) int lexcmp( pair( T *, T *) * a, pair( T *, T * ) * b, int (* cmp)( T *, T * ) ) { 438 int c = cmp( a->first, b->first ); 439 if ( c == 0 ) c = cmp( a->second, b->second ); 437 440 return c; 438 441 } 439 442 \end{lstlisting} 440 Since @pair(T *, T*)@ is a concrete type, there are no added implicit parameters to @lexcmp@, so the code generated by \CFA is effectively identical to a version of this function written in standard C using @void*@, yet the \CFA version is type-checked to ensure thatthe fields of both pairs and the arguments to the comparison function match in type.441 442 Another useful pattern enabled by reused dtype-static type instantiations is zero-cost ``tag'' struct s. Sometimes a particular bit of information is only useful for type-checking, and can be omitted at runtime. Tag structs can be used to provide this information to the compiler without further runtime overhead, as in the following example:443 Since @pair(T *, T *)@ is a concrete type, there are no implicit parameters passed to @lexcmp@, so the generated code is identical to a function written in standard C using @void *@, yet the \CFA version is type-checked to ensure the fields of both pairs and the arguments to the comparison function match in type. 444 445 Another useful pattern enabled by reused dtype-static type instantiations is zero-cost ``tag'' structures. Sometimes a particular bit of information is only useful for type-checking, and can be omitted at runtime. Tag structs can be used to provide this information to the compiler without further runtime overhead, as in the following example: 443 446 \begin{lstlisting} 444 447 forall(dtype Unit) struct scalar { unsigned long value; }; … … 447 450 struct litres {}; 448 451 449 forall(dtype U) 450 scalar(U) ?+?(scalar(U) a, scalar(U) b) { 452 forall(dtype U) scalar(U) ?+?( scalar(U) a, scalar(U) b ) { 451 453 return (scalar(U)){ a.value + b.value }; 452 454 } … … 457 459 scalar(metres) marathon = half_marathon + half_marathon; 458 460 scalar(litres) two_pools = swimming_pool + swimming_pool; 459 marathon + swimming_pool; // ERROR -- caught by compiler460 \end{lstlisting} 461 @scalar@ is a dtype-static type, so all uses of it use a single struct definition, containing only a single @unsigned long@, and can share the same implementations of common routines like @?+?@ -- these implementations may even be separately compiled, unlike \CC template functions. However, the \CFA type-checker ensures that matching types are used by all calls to @?+?@, preventing nonsensical computations like adding the length of a marathon to the volume of an olympic pool.461 marathon + swimming_pool; $\C{// compilation ERROR}$ 462 \end{lstlisting} 463 @scalar@ is a dtype-static type, so all uses have a single structure definition, containing a single @unsigned long@, and can share the same implementations of common routines like @?+?@ -- these implementations may even be separately compiled, unlike \CC template functions. However, the \CFA type-checker ensures matching types are used by all calls to @?+?@, preventing nonsensical computations like adding a length to a volume. 462 464 463 465 \section{Tuples} … … 475 477 int ret = 0; 476 478 while(N) { 477 478 479 ret += va_arg(args, int); // must specify type 480 N--; 479 481 } 480 482 va_end(args); … … 795 797 forall(dtype T0, dtype T1, dtype T2 | sized(T0) | sized(T1) | sized(T2)) 796 798 struct _tuple3 { // generated before the first 3-tuple 797 798 799 799 T0 field_0; 800 T1 field_1; 801 T2 field_2; 800 802 }; 801 803 _tuple3_(int, double, int) y;
Note: See TracChangeset
for help on using the changeset viewer.