Changeset cb4d825 for doc

Timestamp:

Mar 27, 2017, 4:54:31 PM (7 years ago)

Author:

Aaron Moss <a3moss@…>

Branches:

ADT, aaron-thesis, arm-eh, ast-experimental, cleanup-dtors, deferred_resn, demangler, enum, forall-pointer-decay, jacob/cs343-translation, jenkins-sandbox, master, new-ast, new-ast-unique-expr, new-env, no_list, persistent-indexer, pthread-emulation, qualifiedEnum, resolv-new, with_gc

Children:

656ee4f

Parents:

58d246a

Message:

Ongoing integration of Rob's tuple material into paper

Location:

doc

Files:

• generic_types/generic_types.bib (modified) (2 diffs)
• generic_types/generic_types.tex (modified) (2 diffs)
• rob_thesis/tuples.tex (modified) (1 diff)

doc/generic_types/generic_types.bib

@@ -8 +8 @@
     address     = {Waterloo, Ontario, Canada, N2L 3G1},
     note        = {\href{http://plg.uwaterloo.ca/theses/BilsonThesis.pdf}{http://\-plg.uwaterloo.ca/\-theses/\-BilsonThesis.pdf}},
+}
+
+@article{Buhr94a,
+    keywords    = {assignment, parameter passing, multiple assignment},
+    contributer = {pabuhr@plg},
+    author      = {P. A. Buhr and David Till and C. R. Zarnke},
+    title       = {Assignment as the Sole Means of Updating Objects},
+    journal     = spe,
+    month       = sep,
+    year        = 1994,
+    volume      = 24,
+    number      = 9,
+    pages       = {835-870},
 }
 
@@ -40 +53 @@
     note    = {[[unpublished]]}
 }
+
+@mastersthesis{Till89,
+    keywords    = {C, multiple return values, tuples},
+    contributer = {pabuhr@plg},
+    author      = {David W. Till},
+    title       = {Tuples In Imperative Programming Languages},
+    school      = {Department of Computer Science, University of Waterloo},
+    year        = 1989,
+    address     = {Waterloo, Ontario, Canada, N2L 3G1},
+}

doc/generic_types/generic_types.tex

@@ -270 +270 @@
 \section{Generic Types}
 
-The generic types design for \CFA{} must integrate efficiently and naturally with the existing polymorphic functions in \CFA{}, while retaining backwards compatibility with C; maintaining separate compilation is a particularly important constraint on the design. However, where the concrete parameters of the generic type are known, there should not be extra overhead for the use of a generic type.
+One of the known shortcomings of standard C is that it does not provide reusable type-safe abstractions for generic data structures and algorithms. Broadly speaking, there are three approaches to create data structures in C. One approach is to write bespoke data structures for each context in which they are needed. While this approach is flexible and supports integration with the C type-checker and tooling, it is also tedious and error-prone, especially for data structures more complicated than a singly-linked list. A second approach is to use @void*@-based polymorphism. This approach is taken by the C standard library functions @qsort@ and @bsearch@, and does allow the use of common code for common functionality. However, basing all polymorphism on @void*@ eliminates the type-checker's ability to ensure that argument types are properly matched, as well as adding pointer indirection and dynamic allocation to algorithms and data structures which would not otherwise require them. A third approach to generic code is to use pre-processor macros to generate it -- this approach does allow the generated code to be both generic and type-checked, though any errors produced may be difficult to read. Furthermore, writing and invoking C code as preprocessor macros is unnatural and somewhat inflexible.
+
+Other C-like languages such as \CC{} and Java use \emph{generic types} to produce type-safe abstract data types. The \CFA{} team has chosen to implement generic types as well, with the constraints that the generic types design for \CFA{} must integrate efficiently and naturally with the existing polymorphic functions in \CFA{}, while retaining backwards compatibility with C; maintaining separate compilation is a particularly important constraint on the design. However, where the concrete parameters of the generic type are known, there should not be extra overhead for the use of a generic type.
 
 A generic type can be declared by placing a @forall@ specifier on a @struct@ or @union@ declaration, and instantiated using a parenthesized list of types after the type name:
@@ -380 +382 @@
 \section{Tuples}
 
-The @pair(R, S)@ generic type used as an example in the previous section can be considered a special case of a more general \emph{tuple} data structure. The authors have implemented tuples in \CFA{} as an extension to C. \TODO{}
+The @pair(R, S)@ generic type used as an example in the previous section can be considered a special case of a more general \emph{tuple} data structure. The authors have implemented tuples in \CFA{} as an extension to C. The \CFA{} tuple design is particularly motivated by two use cases: \emph{multiple-return-value functions} and \emph{variadic functions}.
+
+In standard C, functions can return at most one value. This restriction results in code which emulates functions with multiple return values by \emph{aggregation} or by \emph{aliasing}. In the former situation, the function designer creates a record type that combines all of the return values into a single type. Of note, the designer must come up with a name for the return type and for each of its fields. Unnecessary naming is a common programming language issue, introducing verbosity and a complication of the user's mental model. As such, this technique is effective when used sparingly, but can quickly get out of hand if many functions need to return different combinations of types. In the latter approach, the designer simulates multiple return values by passing the additional return values as pointer parameters. The pointer parameters are assigned inside of the routine body to emulate a return. Notably, using this approach, the caller is directly responsible for allocating storage for the additional temporary return values. This complicates the call site with a sequence of variable declarations leading up to the call. Also, while a disciplined use of @const@ can give clues about whether a pointer parameter is going to be used as an out parameter, it is not immediately obvious from only the routine signature whether the callee expects such a parameter to be initialized before the call. Furthermore, while many C routines that accept pointers are designed so that it is safe to pass @NULL@ as a parameter, there are many C routines that are not null-safe. On a related note, C does not provide a standard mechanism to state that a parameter is going to be used as an additional return value, which makes the job of ensuring that a value is returned more difficult for the compiler.
+
+C does provide a mechanism for variadic functions through manipulation of @va_list@ objects, but it is notoriously not type-safe. A variadic function is one which contains at least one parameter, followed by @...@ as the last token in the parameter list. In particular, some form of \emph{argument descriptor} is needed to inform the function of the number of arguments and their types, commonly a format string or counter parameter. It is important to note that both of these mechanisms are inherently redundant, because they require the user to specify information that the compiler knows explicitly. This required repetition is error prone, because it is easy for the user to add or remove arguments without updating the argument descriptor. In addition, C requires the programmer to hard code all of the possible expected types. As a result, it is cumbersome to write a variadic function that is open to extension. For example, consider a simple function which sums $N$ @int@s:
+\begin{lstlisting}
+int sum(int N, ...) {
+  va_list args;
+  va_start(args, N);  // must manually specify last non-variadic argument
+  int ret = 0;
+  while(N) {
+    ret += va_arg(args, int);  // must specify type
+    N--;
+  }
+  va_end(args);
+  return ret;
+}
+sum(3, 10, 20, 30);  // must keep initial counter argument in sync
+\end{lstlisting}
+
+The @va_list@ type is a special C data type that abstracts variadic argument manipulation. The @va_start@ macro initializes a @va_list@, given the last named parameter. Each use of the @va_arg@ macro allows access to the next variadic argument, given a type. Since the function signature does not provide any information on what types can be passed to a variadic function, the compiler does not perform any error checks on a variadic call. As such, it is possible to pass any value to the @sum@ function, including pointers, floating-point numbers, and structures. In the case where the provided type is not compatible with the argument's actual type after default argument promotions, or if too many arguments are accessed, the behaviour is undefined \citep{C11}. Furthermore, there is no way to perform the necessary error checks in the @sum@ function at run-time, since type information is not carried into the function body. Since they rely on programmer convention rather than compile-time checks, variadic functions are generally unsafe.
+
+In practice, compilers can provide warnings to help mitigate some of the problems. For example, GCC provides the @format@ attribute to specify that a function uses a format string, which allows the compiler to perform some checks related to the standard format specifiers. Unfortunately, this does not permit extensions to the format string syntax, so a programmer cannot extend the attribute to warn for mismatches with custom types.
+
+\subsection{Tuple Expressions}
+
+The tuple extensions in \CFA{} can express multiple return values and variadic function parameters in an efficient and type-safe manner. \CFA{} introduces \emph{tuple expressions} and \emph{tuple types}. A tuple expression is an expression producing a fixed-size, ordered list of values of heterogeneous types. The type of a tuple expression is the tuple of the subexpression types, or a \emph{tuple type}. In \CFA{}, a tuple expression is denoted by a comma-separated list of expressions enclosed in square brackets. For example, the expression @[5, 'x', 10.5]@ has type @[int, char, double]@. The previous expression has three \emph{components}. Each component in a tuple expression can be any \CFA{} expression, including another tuple expression. The order of evaluation of the components in a tuple expression is unspecified, to allow a compiler the greatest flexibility for program optimization. It is, however, guaranteed that each component of a tuple expression is evaluated for side-effects, even if the result is not used. Multiple-return-value functions can equivalently be called \emph{tuple-returning functions}.
+
+\CFA{} allows declaration of \emph{tuple variables}, variables of tuple type. For example:
+\begin{lstlisting}
+[int, char] most_frequent(const char*);
+
+const char* str = "hello, world!";
+[int, char] freq = most_frequent(str);
+printf("%s -- %d %c\n", str, freq);
+\end{lstlisting}
+In this example, the type of the @freq@ and the return type of @most_frequent@ are both tuple types. Also of note is how the tuple expression @freq@ is implicitly flattened into separate @int@ and @char@ arguments to @printf@; this code snippet could have been shortened by replacing the last two lines with @printf("%s -- %d %c\n", str, most_frequent(str));@ using exactly the same mechanism.
+
+In addition to variables of tuple type, it is also possible to have pointers to tuples, and arrays of tuples. Tuple types can be composed of any types, except for array types, since arrays are not of fixed size, which makes tuple assignment difficult when a tuple contains an array.
+\begin{lstlisting}
+[double, int] di;
+[double, int] * pdi
+[double, int] adi[10];
+\end{lstlisting}
+This examples declares a variable of type @[double, int]@, a variable of type pointer to @[double, int]@, and an array of ten @[double, int]@.
+
+\subsection{Flattening and Restructuring}
+
+In function call contexts, tuples support implicit flattening and restructuring conversions. Tuple flattening recursively expands a tuple into the list of its basic components. Tuple structuring packages a list of expressions into a value of tuple type.
+\begin{lstlisting}
+int f(int, int);
+int g([int, int]);
+int h(int, [int, int]);
+[int, int] x;
+int y;
+
+f(x);      // flatten
+g(y, 10);  // structure
+h(x, y);   // flatten & structure
+\end{lstlisting}
+In \CFA{}, each of these calls is valid. In the call to @f@, @x@ is implicitly flattened so that the components of @x@ are passed as the two arguments to @f@. For the call to @g@, the values @y@ and @10@ are structured into a single argument of type @[int, int]@ to match the type of the parameter of @g@. Finally, in the call to @h@, @y@ is flattened to yield an argument list of length 3, of which the first component of @x@ is passed as the first parameter of @h@, and the second component of @x@ and @y@ are structured into the second argument of type @[int, int]@. The flexible structure of tuples permits a simple and expressive function call syntax to work seamlessly with both single- and multiple-return-value functions, and with any number of arguments of arbitrarily complex structure.
+
+In {K-W C} \citep{Buhr94a,Till89} there were 4 tuple coercions: opening, closing, flattening, and structuring. Opening coerces a tuple value into a tuple of values, while closing converts a tuple of values into a single tuple value. Flattening coerces a nested tuple into a flat tuple, i.e. it takes a tuple with tuple components and expands it into a tuple with only non-tuple components. Structuring moves in the opposite direction, i.e. it takes a flat tuple value and provides structure by introducing nested tuple components.
+
+In \CFA{}, the design has been simplified to require only the two conversions previously described, which trigger only in function call and return situations. Specifically, the expression resolution algorithm examines all of the possible alternatives for an expression to determine the best match. In resolving a function call expression, each combination of function value and list of argument alternatives is examined. Given a particular argument list and function value, the list of argument alternatives is flattened to produce a list of non-tuple valued expressions. Then the flattened list of expressions is compared with each value in the function's parameter list. If the parameter's type is not a tuple type, then the current argument value is unified with the parameter type, and on success the next argument and parameter are examined. If the parameter's type is a tuple type, then the structuring conversion takes effect, recursively applying the parameter matching algorithm using the tuple's component types as the parameter list types. Assuming a successful unification, eventually the algorithm gets to the end of the tuple type, which causes all of the matching expressions to be consumed and structured into a tuple expression. For example, in
+\begin{lstlisting}
+int f(int, [double, int]);
+f([5, 10.2], 4);
+\end{lstlisting}
+There is only a single definition of @f@, and 3 arguments with only single interpretations. First, the argument alternative list @[5, 10.2], 4@ is flattened to produce the argument list @5, 10.2, 4@. Next, the parameter matching algorithm begins, with $P =~$@int@ and $A =~$@int@, which unifies exactly. Moving to the next parameter and argument, $P =~$@[double, int]@ and $A =~$@double@. This time, the parameter is a tuple type, so the algorithm applies recursively with $P' =~$@double@ and $A =~$@double@, which unifies exactly. Then $P' =~$@int@ and $A =~$@double@, which again unifies exactly. At this point, the end of $P'$ has been reached, so the arguments @10.2, 4@ are structured into the tuple expression @[10.2, 4]@. Finally, the end of the parameter list $P$ has also been reached, so the final expression is @f(5, [10.2, 4])@.
+
+\subsection{Member Access}
+
+At times, it is desirable to access a single component of a tuple-valued expression without creating unnecessary temporary variables to assign to. Given a tuple-valued expression @e@ and a compile-time constant integer $i$ where $0 \leq i < n$, where $n$ is the number of components in @e@, @e.i@ accesses the $i$\textsuperscript{th} component of @e@. For example,
+\begin{lstlisting}
+[int, double] x;
+[char *, int] f();
+void g(double, int);
+[int, double] * p;
+
+int y = x.0;  // access int component of x
+y = f().1;  // access int component of f
+p->0 = 5;  // access int component of tuple pointed-to by p
+g(x.1, x.0);  // rearrange x to pass to g
+double z = [x, f()].0.1;  // access second component of first component of tuple expression
+\end{lstlisting}
+As seen above, tuple-index expressions can occur on any tuple-typed expression, including tuple-returning functions, square-bracketed tuple expressions, and other tuple-index expressions, provided the retrieved component is also a tuple. This feature was proposed for {K-W C}, a precursor of \CFA{}, but never implemented \citep[p.~45]{Till89}.
+
+It is possible to access multiple fields from a single expression using a \emph{member-access tuple expression}. The result is a single tuple expression whose type is the tuple of the types of the members. For example,
+\begin{lstlisting}
+struct S { int x; double y; char * z; } s;
+s.[x, y, z];
+\end{lstlisting}
+Here, the type of @s.[x, y, z]@ is @[int, double, char *]@. A member tuple expression has the form @a.[x, y, z];@ where @a@ is an expression with type @T@, where @T@ supports member access expressions, and @x, y, z@ are all members of @T@ with types @T$_x$@, @T$_y$@, and @T$_z$@ respectively. Then the type of @a.[x, y, z]@ is @[T_x, T_y, T_z]@.
+
+Since tuple index expressions are a form of member-access expression, it is possible to use tuple-index expressions in conjunction with member tuple expressions to manually restructure a tuple (e.g. rearrange components, drop components, duplicate components, etc.):
+\begin{lstlisting}
+[int, int, long, double] x;
+void f(double, long);
+
+f(x.[0, 3]);          // f(x.0, x.3)
+x.[0, 1] = x.[1, 0];  // [x.0, x.1] = [x.1, x.0]
+[long, int, long] y = x.[2, 0, 2];
+\end{lstlisting}
+
+It is possible for a member tuple expression to contain other member access expressions:
+\begin{lstlisting}
+struct A { double i; int j; };
+struct B { int * k; short l; };
+struct C { int x; A y; B z; } v;
+v.[x, y.[i, j], z.k];
+\end{lstlisting}
+This expression is equivalent to @[v.x, [v.y.i, v.y.j], v.z.k]@. That is, the aggregate expression is effectively distributed across the tuple, which allows simple and easy access to multiple components in an aggregate, without repetition. It is guaranteed that the aggregate expression to the left of the @.@ in a member tuple expression is evaluated exactly once. As such, it is safe to use member tuple expressions on the result of a side-effecting function.
+
+\subsection{Tuple Assignment}
+
+In addition to tuple-index expressions, individual components of tuples can be accessed by a \emph{destructuring assignment} which has a tuple expression with lvalue components on its left-hand side. More generally, an assignment where the left-hand side of the assignment operator has a tuple type is called \emph{tuple assignment}. There are two kinds of tuple assignment depending on whether the right-hand side of the assignment operator has a tuple type or a non-tuple type, called \emph{multiple assignment} and \emph{mass assignment}, respectively.
+\begin{lstlisting}
+int x;
+double y;
+[int, double] z;
+[y, x] = 3.14;  // mass assignment
+[x, y] = z;     // multiple assignment
+z = 10;         // mass assignment
+z = [x, y];     // multiple assignment
+\end{lstlisting}
+Let $L_i$ for $i$ in $[0, n)$ represent each component of the flattened left side, $R_i$ represent each component of the flattened right side of a multiple assignment, and $R$ represent the right side of a mass assignment.
+
+For a multiple assignment to be valid, both tuples must have the same number of elements when flattened. Multiple assignment assigns $R_i$ to $L_i$ for each $i$.
+That is, @?=?(&$L_i$, $R_i$)@ must be a well-typed expression. In the previous example, @[x, y] = z@, @z@ is flattened into @z.0, z.1@, and the assignments @x = z.0@ and @y = z.1@ are executed.
+
+A mass assignment assigns the value $R$ to each $L_i$. For a mass assignment to be valid, @?=?(&$L_i$, $R$)@ must be a well-typed expression. This differs from C cascading assignment (e.g. @a=b=c@) in that conversions are applied to $R$ in each individual assignment, which prevents data loss from the chain of conversions that can happen during a cascading assignment. For example, @[y, x] = 3.14@ performs the assignments @y = 3.14@ and @x = 3.14@, which results in the value @3.14@ in @y@ and the value @3@ in @x@. On the other hand, the C cascading assignment @y = x = 3.14@ performs the assignments @x = 3.14@ and @y = x@, which results in the value @3@ in @x@, and as a result the value @3@ in @y@ as well.
+
+Both kinds of tuple assignment have parallel semantics, such that each value on the left side and right side is evaluated \emph{before} any assignments occur. As a result, it is possible to swap the values in two variables without explicitly creating any temporary variables or calling a function:
+\begin{lstlisting}
+int x = 10, y = 20;
+[x, y] = [y, x];
+\end{lstlisting}
+After executing this code, @x@ has the value @20@ and @y@ has the value @10@.
+
+In \CFA{}, tuple assignment is an expression where the result type is the type of the left-hand side of the assignment, as in normal assignment. That is, a tuple assignment produces the value of the left-hand side after assignment. These semantics allow cascading tuple assignment to work out naturally in any context where a tuple is permitted. These semantics are a change from the original tuple design in {K-W C} \citep{Till89}, wherein tuple assignment was a statement that allows cascading assignments as a special case. This decision wa made in an attempt to fix what was seen as a problem with assignment, wherein it can be used in many different locations, such as in function-call argument position. While permitting assignment as an expression does introduce the potential for subtle complexities, it is impossible to remove assignment expressions from \CFA{} without affecting backwards compatibility with C. Furthermore, there are situations where permitting assignment as an expression improves readability by keeping code succinct and reducing repetition, and complicating the definition of tuple assignment puts a greater cognitive burden on the user. In another language, tuple assignment as a statement could be reasonable, but it would be inconsistent for tuple assignment to be the only kind of assignment in \CFA{} that is not an expression.
+
+\subsection{Casting}
+
+In C, the cast operator is used to explicitly convert between types. In \CFA{}, the cast operator has a secondary use as type ascription. That is, a cast can be used to select the type of an expression when it is ambiguous, as in the call to an overloaded function:
+\begin{lstlisting}
+int f();     // (1)
+double f();  // (2)
+
+f();       // ambiguous - (1),(2) both equally viable
+(int)f();  // choose (2)
+\end{lstlisting}
+
+Since casting is a fundamental operation in \CFA{}, casts should be given a meaningful interpretation in the context of tuples. Taking a look at standard C provides some guidance with respect to the way casts should work with tuples:
+\begin{lstlisting}
+int f();
+void g();
+
+(void)f();  // (1)
+(int)g();  // (2)
+
+struct A { int x; };
+(struct A)f();  // (3)
+\end{lstlisting}
+In C, (1) is a valid cast, which calls @f@ and discards its result. On the other hand, (2) is invalid, because @g@ does not produce a result, so requesting an @int@ to materialize from nothing is nonsensical. Finally, (3) is also invalid, because in C casts only provide conversion between scalar types \cite{C11}. For consistency, this implies that any case wherein the number of components increases as a result of the cast is invalid, while casts which have the same or fewer number of components may be valid.
+
+Formally, a cast to tuple type is valid when $T_n \leq S_m$, where $T_n$ is the number of components in the target type and $S_m$ is the number of components in the source type, and for each $i$ in $[0, n)$, $S_i$ can be cast to $T_i$. Excess elements ($S_j$ for all $j$ in $[n, m)$) are evaluated, but their values are discarded so that they are not included in the result expression. This discarding naturally follows the way that a cast to @void@ works in C.
+
+For example, in
+\begin{lstlisting}
+  [int, int, int] f();
+  [int, [int, int], int] g();
+
+  ([int, double])f();           // (1)
+  ([int, int, int])g();         // (2)
+  ([void, [int, int]])g();      // (3)
+  ([int, int, int, int])g();    // (4)
+  ([int, [int, int, int]])g();  // (5)
+\end{lstlisting}
+
+(1) discards the last element of the return value and converts the second element to @double@. Since @int@ is effectively a 1-element tuple, (2) discards the second component of the second element of the return value of @g@. If @g@ is free of side effects, this is equivalent to @[(int)(g().0), (int)(g().1.0), (int)(g().2)]@.
+Since @void@ is effectively a 0-element tuple, (3) discards the first and third return values, which is effectively equivalent to @[(int)(g().1.0), (int)(g().1.1)]@).
+
+Note that a cast is not a function call in \CFA{}, so flattening and structuring conversions do not occur for cast expressions\footnote{User-defined conversions have been considered, but for compatibility with C and the existing use of casts as type ascription, any future design for such conversions would require more precise matching of types than allowed for function arguments and parameters.}. As such, (4) is invalid because the cast target type contains 4 components, while the source type contains only 3. Similarly, (5) is invalid because the cast @([int, int, int])(g().1)@ is invalid. That is, it is invalid to cast @[int, int]@ to @[int, int, int]@.
+
+\TODO{}
+
+In \CFA{}, functions can be declared to return multiple values with an extension to the function declaration syntax. Multiple return values are declared as a comma-separated list of types in square brackets in the same location that the return type appears in standard C function declarations. The ability to return multiple values from a function requires a new syntax for the @return@ statement. For consistency, the @return@ statement in \CFA{} accepts a comma-separated list of expressions in square brackets. The expression resolution phase of the \CFA{} compiler ensures that the correct form is used depending on the values being returned and the return type of the current function. A multiple-returning function with return type @T@ can return any expression that is implicitly convertible to @T@. As an example, a function returning the most frequent character in a string and its frequency can be written in \CFA{} as:
+\begin{lstlisting}
+[int, char] most_frequent(const char * str) {  // tuple return type
+  char freqs [26] = { 0 };
+  int ret_freq = 0;
+  char ret_ch = 'a';
+  for (int i = 0; str[i] != '\0'; ++i) {
+    if (isalpha(str[i])) {  // only count letters
+      int ch = tolower(str[i]);  // convert to lower case
+      int idx = ch-'a';
+      if (++freqs[idx] > ret_freq) {  // update on new max
+        ret_freq = freqs[idx];
+        ret_ch = ch;
+      }
+    }
+  }
+  return [ret_freq, ret_ch];  // return tuple expression
+}
+\end{lstlisting}
+This approach provides the benefits of compile-time checking for appropriate return statements as in aggregation, but without the required verbosity of declaring a new named type.
+
+The addition of multiple-return-value functions necessitates a syntax for accepting multiple values at the call-site. The simplest mechanism for retaining a return value in C is variable assignment. By assigning the return value into a variable, its value can be retrieved later at any point in the program. As such, \CFA{} allows assigning multiple values from a function into multiple variables, using a square-bracketed list of lvalue expressions on the left side.
+\begin{lstlisting}
+const char * str = "hello world";
+int freq;
+char ch;
+[freq, ch] = most_frequent(str);  // assign into multiple variables
+printf("%s -- %d %c\n", str, freq, ch);
+\end{lstlisting}
+
+It is also common to use a function's output as the input to another function. \CFA{} also allows this case, without any new syntax. When a function call is passed as an argument to another call, the expression resolver attempts to find the best match of actual arguments to formal parameters given all of the possible expression interpretations in the current scope \citep{Bilson03}. For example,
+\begin{lstlisting}
+void process(int);       // (1)
+void process(char);      // (2)
+void process(int, char); // (3)
+void process(char, int); // (4)
+
+process(most_frequent("hello world"));  // selects (3)
+\end{lstlisting}
+In this case, there is only one option for a function named @most_frequent@ that takes a string as input. This function returns two values, one @int@ and one @char@. There are four options for a function named @process@, but only two which accept two arguments, and of those the best match is (3), which is also an exact match. This expression first calls @most_frequent("hello world")@, which produces the values @3@ and @'l'@, which are fed directly to the first and second parameters of (3), respectively.
+
+
 
 \TODO{} Check if we actually can use ttype parameters on generic types (if they set the complete flag, it should work, or nearly so).

doc/rob_thesis/tuples.tex

@@ -87 +87 @@
 Multiple return values are declared as a comma-separated list of types in square brackets in the same location that the return type appears in standard C function declarations.
 The ability to return multiple values from a function requires a new syntax for the return statement.
-For consistency, the return statement in \CFA accepts a common-separated list of expressions in square brackets.
+For consistency, the return statement in \CFA accepts a comma-separated list of expressions in square brackets.
 The expression resolution phase of the \CFA translator ensures that the correct form is used depending on the values being returned and the return type of the current function.
 A multiple-returning function with return type @T@ can return any expression that is implicitly convertible to @T@.