Changeset 41efd33


Ignore:
Timestamp:
Feb 26, 2020, 11:55:45 AM (20 months ago)
Author:
Thierry Delisle <tdelisle@…>
Branches:
arm-eh, jacob/cs343-translation, jenkins-sandbox, master, new-ast, new-ast-unique-expr
Children:
04e6f93
Parents:
3b56166
Message:

New version of the introduction

File:
1 edited

Legend:

Unmodified
Added
Removed
  • doc/theses/thierry_delisle_PhD/comp_II/comp_II.tex

    r3b56166 r41efd33  
    5151\section{Introduction}
    5252\subsection{\CFA and the \CFA concurrency package}
    53 \CFA\cit is a modern, polymorphic, non-object-oriented, backwards-compatible extension of the C programming language. It aims to add high productivity features while maintaning the predictible performance of C. As such concurrency in \CFA\cit aims to offer simple and safe high-level tools while still allowing performant code. Concurrent code is written in the syncrhonous programming paradigm but uses \glspl{uthrd} in order to achieve the simplicity and maintainability of synchronous programming without sacrificing the efficiency of asynchronous programing. As such the \CFA scheduler is a user-level scheduler that maps \glspl{uthrd} onto \glspl{kthrd}.
    54 
    55 The goal of this research is to produce a scheduler that is simple to use and offers acceptable performance in all cases. Here simplicity does not refer to the API but to how much scheduling concerns programmers need to take into account when using the \CFA concurrency package. Therefore, the main goal of this proposal is as follows :
     53\CFA\cit is a modern, polymorphic, non-object-oriented, backwards-compatible extension of the C programming language. It aims to add high productivity features while maintaning the predictible performance of C. As such, concurrency in \CFA\cit aims to offer simple and safe high-level tools while still allowing performant code. Concurrent code is written in the synchronous programming paradigm but uses \glspl{uthrd} in order to achieve the simplicity and maintainability of synchronous programming without sacrificing the efficiency of asynchronous programing. As such, the \CFA scheduler is a preemptive user-level scheduler that maps \glspl{uthrd} onto \glspl{kthrd}.
     54
     55Scheduling occurs when execution switches from one thread to the other without the first thread explicitly specifying which thread it is swithching to. This scheduling is an indirect handoff, as opposed to coroutines and generators which always explicitly specify the target they are context switching to. The cost of switching between two threads for an indirect handoff has two components : the cost of actually context-switching, i.e., changing the relevant registers to move execution from one thread to the other, and the cost of scheduling, deciding which thread to run next, among all the threads ready to run. The first cost is generally constant and fixed, while the scheduling cost can vary based on the system state\footnote{The context-switch can either be done in one step, after the scheduling, or in two steps, context-switching to a fixed third-thread before scheduling.}. Adding multiple \glspl{kthrd} does not fundamentally change the scheduler semantics or requirements, it simply adds new correctness requirements, i.e. \textit{linearizability}, and a new dimension to performance: scalbility, where scheduling cost now also depends on contention.
     56
     57The more threads switch among each other, the more the administrating cost of scheduling becomes noticeable. It is therefore important to attempt to build a scheduler with the lowest possible cost and latency. Another important consideration is to take into account fairness. In principle, scheduling should give the illusion that all threads that are ready to run, are running simultaneously. This illusion is easier to reason about but can break down if the scheduler allows to much unfairness. Therefore, the scheduler should offer as much fairness as needed to guarantee eventual progress, but no more to help performance.
     58
     59The goal of this research is to produce a scheduler that is simple for programmers to understand and offers good performance. Here understandability does not refer to the API but to how much scheduling concerns programmers need to take into account when writing a \CFA concurrent package. Therefore, the main goal of this proposal is :
    5660\begin{quote}
    57 The \CFA scheduler should be \emph{viable} for any workload.
     61The \CFA scheduler should be \emph{viable} for \emph{any} workload.
    5862\end{quote}
    5963
    60 This objective includes producing a scheduling strategy with minimal fairness guarantees, creating an abstraction layer over the operating system to handle kernel-threads spinning unnecessarily and hide blocking I/O operations and, writing sufficient library tools to allow developpers to properly use the scheduler.
     64For a general purpose scheduler, it is impossible to produce an optimal algorithm as it would require knowledge of the future. As such, scheduling performance is generally either defined by the best case scenario, a workload to which the scheduler is tailored, or the worst case scenario i.e., the scheduler behaves no worst than \emph{X}. For this proposal, the performance is evaluated using the second approach to allow \CFA programmers to rely on scheduling performance.
     65
     66This objective includes producing a scheduling strategy with sufficient fairness guarantees, creating an abstraction layer over the operating system to handle kernel-threads spinning unnecessarily and hide blocking I/O operations, and writing sufficient library tools to allow developers to properly use the scheduler.
    6167
    6268% ===============================================================================
     
    6470
    6571\section{Scheduling for \CFA}
    66 While the \CFA concurrency package doesn't have any particular scheduling needs beyond those of any concurrency package which uses \glspl{uthrd}, it is important that the default \CFA Scheduler be viable in general. Indeed, since the \CFA Scheduler does not target any specific workloads, it is unrealistic to demand that it use the best scheduling strategy in all cases. However, it should offer a viable ``out of the box'' solution for most scheduling problems so that programmers can quickly write performant concurrent without needed to think about which scheduling strategy is more appropriate for their workload. Indeed, only programmers with exceptionnaly high performance requirements should need to write their own scheduler. More specifically, two broad types of schedulering strategies should be avoided in order to avoid penalizing certain types of workloads : feedback-based and priority schedulers.
     72While the \CFA concurrency package does not have any particular scheduling requirements beyond using \glspl{uthrd}, it is important that only programmers with exceptionnaly high performance requirements should need to write their own scheduler. We can therefore more precisely detail the requirements of the \CFA scheduler :
     73
     74\paragraph{Correctness} As with any other concurrent data structure or algorithm, the correctness requirement is paramount. The scheduler cannot allow threads to be dropped from the ready-queue, i.e., scheduled but never run, or be executed multiple times when only being scheduled once. Since \CFA does not already allow spurious wakeup, this definition of correctness also means the scheduler should not introduce spurious wakeups. The \CFA scheduler must be correct.
     75
     76\paragraph{Performance} The performance of a scheduler can generally be mesured in terms of scheduling cost, scalability and latency. Scheduling cost is the cost to switch from one thread to another, as mentioned above. For simple applications where a single kernel thread will do most of the scheduling, it is generally the dominating cost. When adding many kernel threads, scalability can become an issue, effectively increasing the cost of context-switching when contention is high. Finally, a third axis of performance is tail latency. This measurement is related to fairness and mesures how long is needed for a thread to be run once scheduled but evaluated in the worst cases. The \CFA scheduler should offer good performance in all three metrics.
     77
     78\paragraph{Fairness} Like performance, this requirements has several aspect : eventual progress, predictability and performance reliablility. As a hard requirement, the \CFA must guarantee eventual progress, i.e., prevent starvation, otherwise the above mentioned illusion of simultaneous execution is broken and the scheduler becomes much more complext to reason about. Beyond this requirement, performance should be predictible and reliable. This means similar workload achieve similar performance and programmer intuition is respected. An example of this is : a thread that yield agressively should not run more often then other tasks. While this is intuitive, it does not hold true for many work-stealing or feedback based schedulers. The \CFA scheduler must guarantee eventual progress and should be predictible and offer reliable performance.
     79
     80\paragraph{Efficiency} Finally, efficient usage of CPU ressources is also an important requirement. This is discussed more in depth towards the end of this proposal. It effectively refers to avoid using CPU power when there are no threads to run, and conversly, use all CPUs available when the workload can benefit from it. Balancing these two states is where the complexity lies. The \CFA scheduler should be efficient.
     81
     82To achieve these requirements, I believe two broad types of scheduling strategies should be avoided : feedback-based and priority schedulers.
    6783
    6884\subsection{Feedback-Based Schedulers}
    69 Many operating systems use schedulers based on feadback loops in some form, they measure how much CPU a particular thread has used\footnote{Different metrics can be used to here but it is not relevant to the discussion.} and schedule threads based on this metric. These strategies are sensible for operating systems but rely on two assumptions on the workload :
     85Many operating systems use schedulers based on feedback in some form; e.g., measuring how much CPU a particular thread has used\footnote{Different metrics can measured here but it is not relevant to the discussion.} and schedule threads based on this metric. These strategies are sensible for operating systems but rely on two assumptions on the workload :
    7086
    7187\begin{enumerate}
    72         \item Threads live long enough to be scheduled many times.
    73         \item Cooperation among all threads is not simply infeasible, it is a security risk.
     88        \item Threads live long enough for useful feedback information to be to gathered.
     89        \item Threads belong to multiple users so fairness across threads is insufficient.
    7490\end{enumerate}
    7591
    76 While these two assumptions generally hold for operating systems, they may not for \CFA programs. In fact, \CFA uses \glspl{uthrd} which have the explicit goal of reducing the cost of threading primitives to allow many smaller threads. This can naturally lead to have threads with much shorter lifetime and only being scheduled a few times. Scheduling strategies based on feadback loops cannot be effective in these cases because they will not have the opportunity to measure the metrics that underlay the algorithm. Note that the problem of feadback loop convergence (reacting too slowly to scheduling events) is not specific to short lived threads but can also occur with threads that show drastic changes in scheduling event, e.g., threads running for long periods of time and then suddenly blocking and unblocking quickly and repeatedly.
    77 
    78 In the context of operating systems, these concerns can be overshadowed by a more pressing concern : security. When multiple users are involved, it is possible that some users are malevolent and try to exploit the scheduling strategy in order to achieve some nefarious objective. Security concerns mean that more precise and robust fairness metrics must be used. In the case of the \CFA scheduler, every thread runs in the same user-space and are controlled from the same user. It is then possible to safely ignore the possibility that threads are malevolent and assume that all threads will ignore or cooperate with each other. This allows for a much simpler fairness metric and in this proposal ``fairness'' will be considered as equal opportunities to run once scheduled.
    79 
    80 Since feadback is not necessarily feasible within the lifetime of all threads and a simple fairness metric can be used, the scheduling strategy proposed for the \CFA runtime does not user per-threads feedback. Feedback loops in general are not rejected for secondary concerns like idle sleep, but no feedback loop is used to decide which thread to run next.
     92While these two assumptions generally hold for operating systems, they may not for user-level threading. Since \CFA has the explicit goal of allowing many smaller threads, this can naturally lead to threads with much shorter lifetime, only being scheduled a few times. Scheduling strategies based on feedback cannot be effective in these cases because they do not have the opportunity to measure the metrics that underlay the algorithm. Note that the problem of feedback convergence (reacting too slowly to scheduling events) is not specific to short lived threads but can also occur with threads that show drastic changes in scheduling event, e.g., threads running for long periods of time and then suddenly blocking and unblocking quickly and repeatedly.
     93
     94In the context of operating systems, these concerns can be overshadowed by a more pressing concern : security. When multiple users are involved, it is possible that some users are malevolent and try to exploit the scheduling strategy in order to achieve some nefarious objective. Security concerns mean that more precise and robust fairness metrics must be used to guarantee fairness across users as well as threads. In the case of the \CFA scheduler, every thread runs in the same user-space and are controlled from the same user. Fairness across users is therefore a given and it is then possible to safely ignore the possibility that threads are malevolent. This allows for a much simpler fairness metric and in this proposal ``fairness'' is considered as follows : when multiple threads are cycling through the system, the total ordering of threads being scheduled, i.e., pushed onto the readyqueue, should not differ much from the total ordering of threads being executed, i.e., popped from the readyqueue.
     95
     96Since feedback is not necessarily feasible within the lifetime of all threads and a simple fairness metric can be used, the scheduling strategy proposed for the \CFA runtime does not use per-threads feedback. Feedback in general is not rejected for secondary concerns like idle sleep, but no feedback is used to decide which thread to run next.
    8197
    8298\subsection{Priority Schedulers}
    83 Another broad category of schedulers are priority schedulers. In these scheduling strategies threads have priorities and the runtime schedules the threads with the highest priority before scheduling other threads. Threads with equal priority are scheduled using a secondary strategy, often something simple like round-robin or FIFO. These priority mean that, as long as there is a thread with a higher priority that desires to run, a thread with a lower priority will not run. This possible starving of threads can dramatically increase programming complexity since starving threads and priority inversion (prioritising a lower priority thread) can both lead to serious problems, leaving programmers between a rock and a hard place.
     99Another broad category of schedulers are priority schedulers. In these scheduling strategies, threads have priorities and the runtime schedules the threads with the highest priority before scheduling other threads. Threads with equal priority are scheduled using a secondary strategy, often something simple like round-robin or FIFO. These priority mean that, as long as there is a thread with a higher priority that desires to run, a thread with a lower priority do not run. This possible starving of threads can dramatically increase programming complexity since starving threads and priority inversion (prioritising a lower priority thread) can both lead to serious problems.
    84100
    85101An important observation to make is that threads do not need to have explicit priorities for problems to be possible. Indeed, any system with multiple ready-queues and attempts to exhaust one queue before accessing the other queues, could encounter starvation problems. A popular scheduling strategy that suffers from implicit priorities is work-stealing. Work-stealing is generally presented as follows :
     
    93109\end{enumerate}
    94110
    95 In a loaded system\footnote{A loaded system is a system where threads are being run at the same rate they are scheduled}, if a thread does not yield or block for an extended period of time, threads on the same processor list will starve if no other processors can exhaust their list.
     111In a loaded system\footnote{A loaded system is a system where threads are being run at the same rate they are scheduled.}, if a thread does not yield or block for an extended period of time, threads on the same processor list starve if no other processors exhaust their list.
    96112
    97113Since priorities can be complex to handle for programmers, the scheduling strategy proposed for the \CFA runtime does not use a strategy with either implicit or explicit thread priorities.
    98114
    99 \subsection{Schedulers without feadback or priorities}
    100 I claim that the ideal default scheduler for the \CFA runtime is a scheduler that offers good scalability and a simple fairness guarantee that is easy for programmers to reason about. The simplest fairness guarantee is to guarantee FIFO ordering, i.e., threads scheduled first will run first. However, enforcing FIFO ordering generally conflicts with scalability across multiple processors because of the additionnal synchronization. Thankfully, strict FIFO is not needed for scheduling. Since concurrency is inherently non-deterministic, fairness concerns in scheduling are only a problem if a thread repeatedly runs before another thread can run\footnote{This is because the non-determinism means that programmers must already handle ordering problems in order to produce correct code and already must rely on weak guarantees, for example that a specific thread will \emph{eventually} run.}. This need for unfairness to persist before problems occur means that the FIFO fairness guarantee can be significantly relaxed without causing problems. For this proposal, the target guarantee is that the \CFA scheduler guarantees \emph{probable} FIFO ordering, which is defined as follows :
     115\subsection{Schedulers without feedback or priorities}
     116I claim that the ideal default scheduler for the \CFA runtime is a scheduler that offers good scalability and a simple fairness guarantee that is easy for programmers to reason about. The simplest fairness guarantee is FIFO ordering, i.e., threads scheduled first run first. However, enforcing FIFO ordering generally conflicts with scalability across multiple processors because of the additionnal synchronization. Thankfully, strict FIFO is not needed for sufficient fairness. Since concurrency is inherently non-deterministic, fairness concerns in scheduling are only a problem if a thread repeatedly runs before another thread can run\footnote{This is because the non-determinism means that programmers must already handle ordering problems in order to produce correct code and already must rely on weak guarantees, for example that a specific thread will \emph{eventually} run.}. Since some reordering does not break correctness, the FIFO fairness guarantee can be significantly relaxed without causing problems. For this proposal, the target guarantee is that the \CFA scheduler guarantees \emph{probable} FIFO ordering, which allows reordering but makes it improbable that threads are reordered far from their position in total ordering.
     117
     118It is defined as follows :
    101119\begin{itemize}
    102120        \item Given two threads $X$ and $Y$, the odds that thread $X$ runs $N$ times \emph{after} thread $Y$ is scheduled but \emph{before} it is run, decreases exponentially with regards to $N$.
    103121\end{itemize}
    104122
    105 While this is not a strong guarantee, the probability that problems persist for long period of times decreases exponentially, making persisting problems virtually impossible.
    106 
    107 \subsection{Real-Time}
    108 While the objective of this proposed scheduler is similar to the objective of real-time scheduling, this proposal is not a proposal for real-time scheduler and as such makes no attempt to offer either soft or hard guarantees on scheduling delays.
    109 
    110 % ===============================================================================
    111 % ===============================================================================
    112 \section{Proposal}
    113 
    114 \subsection{Ready-Queue}
    115 Using trevor's paper\cit as basis, it is simple to build a relaxed FIFO list that is fast and scalable for loaded or overloaded systems. The described queue uses an array of underlying strictly FIFO queue. Pushing new data is done by selecting one of these underlying queues at random, recording a timestamp for the push and pushing to the selected queue. Popping is done by selecting two queues at random and popping from the queue for which the head has the oldest timestamp. In loaded or overloaded systems, it is higly likely that the queues is far from empty, e.i., several tasks are on each of the underlying queues. This means that selecting a queue at random to pop from is higly likely to yield a queue that is not empty.
    116 
    117 When the ready queue is "more empty", i.e., several of the inner queues are empty, selecting a random queue for popping is less likely to yield a valid selection and more attempts need to be made, resulting in a performance degradation. In cases, with few elements on the ready queue and few processors running, performance can be improved by adding information to help processors find which inner queues are used. Preliminary performance tests indicate that with few processors, a bitmask can be used to identify which inner queues are currently in use. This is especially effective in the single-thread case, where the bitmask will always be up-to-date. Furthermore, modern x86 CPUs have a BMI2 extension which allow using the bitmask with very little overhead over directly accessing the readyqueue offerring decent performance even in cases with many empty inner queues. This technique does not solve the problem completely, it randomly attempts to find a block of 64 queues where at least one is used, instead of attempting to find a used queue. For systems with a large number of cores this does not completely solve the problem, but it is a fixed improvement. The size of the blocks are limited by the maximum size atomic instruction can operate on, therefore atomic instructions on large words would increase the 64 queues per block limit.
    118 
    119 \TODO double check the next sentence
    120 Preliminary result indicate that the bitmask approach with the BMI2 extension can lead to multi-threaded performance that is contention agnostic in the worst case.
    121 This result suggests that the contention penalty and the increase performance for additionnal thread cancel each other exactly. This may indicate that a relatively small reduction in contention may tip the performance into positive scalling even for the worst case. It can be noted that in cases of high-contention, the use of the bitmask to find queues that are not empty is much less reliable. Indeed, if contention on the bitmask is high, it means it probably changes significantly between the moment it is read and the actual operation on the queues it represents. Furthermore, the objective of the bitmask is to avoid probing queues that are empty. Therefore, in cases where the bitmask is highly contented, it may be preferrable to probe queues randomly, either until contention decreases or until a prior prefetch of the bitmask completes. Ideally, the scheduler would be able to observe that the bitmask is highly contented and adjust its behaviour appropriately. However, I am not aware of any mechanism to query whether a cacheline is in cache or to run other instructions until a cacheline is fetch without blocking on the cacheline. As such, an alternative that may have a similar impact would be for each thread to have their own bitmask, which would be updated both after each scheduler action and after a certain number of failed probing. If the bitmask has little contention, the local bitmask will be mostly up-to-date and several threads won't need to contend as much on the global bitmask. If the bitmask has significant contention, then fetching it becomes more expensive and threads may as well probe randomly. This solution claims that probing randomly or against an out-of-date bitmask is equivalent.
    122 
    123 In cases where this is insufficient, another approach is to use a hiearchical data structure. Creating a tree of nodes to reduce contention has been shown to work in similar cases\cit(SNZI: Scalable NonZero Indicators)\footnote{This particular paper seems to be patented in the US. How does that affect \CFA? Can I use it in my work?}. However, this approach may lead to poorer single-threaded performance due to the inherent pointer chasing, as such, it was not considered as the first approach but as a fallback in case the bitmask approach does not satisfy the performance goals.
    124 
    125 Part of this performance relies on contention being low when there are few threads on the readyqueue. However, this can be assumed reliably if the system handles putting idle processors to sleep, which is addressed in section \ref{sleep}.
    126 
    127 \paragraph{Objectives and Existing Work}
    128 How much scalability is actually needed is highly debatable, libfibre\cit is has compared favorably to other schedulers in webserver tests\cit and uses a single atomic counter in its scheduling algorithm similarly to the proposed bitmask. As such the single atomic instruction on a shared cacheline may be sufficiently performant.
    129 
    130 I have built a prototype of this ready-queue (including the bitmask and BMI2 usage, but not the sharded bitmask) and ran performance experiments on it but it is difficult to compare this prototype to a thread scheduler as the prototype is used as a data-queue. I have also integrated this prototype into the \CFA runtime, but have not yet created performance experiments to compare results. I believe that the bitmask approach is currently one of the larger risks of the proposal, early tests lead me to believe it may work but it is not clear that the contention problem can be overcome. The worst-case scenario is a case where the number of processors and the number of ready threads are similar, yet scheduling events are very frequent. Fewer threads should lead to the Idle Sleep mechanism reducing contention while having many threads ready leads to optimal performance. It is difficult to evaluate the likeliness of this worst-case scenario in real workloads. I believe, frequent scheduling events suggest a more ``bursty'' workload where new work is finely divided among many threads which race to completion. This type of workload would only see a peek of contention close to the end of the work, but no sustained contention. Very fine-grained pipelines are less ``bursty'', these may lead to more sustained contention. However, they could also easily benefit from a direct hand-off strategy which would circumvent the problem entirely.
    131 
    132 \subsection{Dynamic Resizing}
    133 The \CFA runtime system currently handles dynamically adding and removing processors from clusters at any time. Since this is part of the existing design, the proposed scheduler must also support this behaviour. However, dynamicly resizing the clusters is considered a rare event associated with setup, teardown and major configuration changes. This assumptions is made both in the design of the proposed scheduler as well as in the original design of the \CFA runtime system. As such, the proposed scheduler must honor the correctness of these behaviour but does not have any performance objectives with regards to resizing a cluster. How long adding or removing processors take and how much this disrupts the performance of other threads is considered a secondary concern since it should be amortized over long period of times. This description effectively matches with te description of a Reader-Writer lock, in frequent but invasive updates among frequent (mostly) read operations. In the case of the Ready-Queue described above, read operations are operations that push or pop from the ready-queue but do not invalidate any references to the ready queue data structures. Writes on the other-hand would add or remove inner queues, invalidating references to the array of inner queues in the process. Therefore, the current proposed approach to this problem is the add a per-cluster Reader Writer lock around the ready queue to prevent restructuring of the ready-queue data structure while threads are being pushed or popped.
    134 
    135 There are possible alternatives to the Reader Writer lock solution. This problem is effectively a memory reclamation problem and as such there is a large body of research on the subject. However, the RWlock solution is simple and can be leveraged to solve other problems (e.g. processor ordering and memory reclamation of threads) which makes it an attractive solution.
    136 
    137 \paragraph{Objectives and Existing Work}
    138 The lock must offer scalability and performance on par with the actual ready-queue in order not to introduce a new bottle neck. I have already built a lock that fits the desired requirements and preliminary testing show scalability and performance that exceed the target. As such, I do not consider this lock to be a risk on this project.
    139 
    140 \subsection{Idle Sleep} \label{sleep}
    141 As mentionned above, idle sleep is the process of putting processors to sleep while they do not have threads to execute. In this context processors are kernel-threads and sleeping refers to asking the kernel to block a thread. This can be achieved with either thread synchronization operations like pthread\_cond\_wait or using signal operations like sigsuspend.
    142 
    143 Support for idle sleep broadly involves calling the operating system to block the kernel thread but also handling the race between the sleeping and the waking up, and handling which kernel thread should sleep or wake-up.
    144 
    145 When a processor decides to sleep, there is a race that occurs between it signalling that it will go to sleep (so other processors can find sleeping processors) and actually blocking the kernel thread. This is equivalent to the classic problem of missing signals when using condition variables, the ``sleepy'' processor indicates that it will sleep but has not yet gone to sleep, if another processor attempts to wake it up, the waking-up operation may claim nothing needs to be done and the signal will have been missed. In cases where threads are scheduled from processors on the current cluster, loosing signals is not necessarily critical, because at least some processors on the cluster are awake. Individual processors always finish shceduling threads before looking for new work, which means that the last processor to go to sleep cannot miss threads scheduled from inside the cluster (if they do, that demonstrates the ready-queue is not linearizable). However, this guarantee does not hold if threads are shceduled from outside the cluster, either due to an external event like timers and I/O, or due to a thread migrating from a different cluster. In this case, missed signals can lead to the cluster deadlocking where it should not\footnote{Clusters ``should'' never deadlock, but for this proposal, cases where \CFA users \emph{actually} wrote \CFA code that leads to a deadlock it is considered as a deadlock that ``should'' happen. }. Therefore, it is important that the scheduling of threads include a mechanism where signals \emph{cannot} be missed. For performance reasons, it can be advantageous to have a secondary mechanism that allows signals to be missed in cases where it cannot lead to a deadlock. To be safe, this process must include a ``handshake'' where it is guaranteed that either~: the sleepy processor notices that a thread was scheduled after it signalled its intent to block or code scheduling threads well see the intent to sleep before scheduling and be able to wake-up the processor. This matter is complicated by the fact that pthread offers few tools to implement this solution and offers no guarantee of ordering of threads waking up for most of these tools.
    146 
    147 Another issues is trying to avoid kernel sleeping and waking frequently. A possible partial solution is to order the processors so that the one which most recently went to sleep is woken up. This allows other sleeping processors to reach deeper sleep state (when these are available) while keeping ``hot'' processors warmer. Note that while this generally means organising the processors in a stack, I believe that the unique index provided by the ReaderWriter lock can be reused to strictly order the waking order of processors, causing a LIFO like waking order. While a strict LIFO stack is probably better, using the processor index could proove useful and offer a sufficiently LIFO ordering.
    148 
    149 Finally, another important aspect of Idle Sleep is when should processors make the decision to sleep and when it is appropriate for sleeping processors to be woken up. Processors that are unnecessarily awake lead to unnecessary contention and power consumption, while too many sleeping processors can lead to sub-optimal throughput. Furthermore, transitions from sleeping to awake and vice-versa also add unnecessary latency. There is already a wealth of research on the subject and I do not plan to implement a novel idea for the Idle Sleep heuristic in this project.
    150 
    151 \subsection{Asynchronous I/O}
    152 The final aspect of this proposal is asynchronous I/O. Without it, user threads that execute I/O operations will block the underlying kernel thread. This leads to poor throughput, it would be preferrable to block the user-thread and reuse the underlying kernel-thread to run other ready threads. This requires intercepting the user-threads' calls to I/O operations, redirecting them to an asynchronous I/O interface and handling the multiplexing between the synchronous and asynchronous API. As such, these are the three components needed to implemented to support asynchronous I/O : an OS abstraction layer over the asynchronous interface, an event-engine to (de)multiplex the operations and a synchronous interface for users to use. None of these components currently exist in \CFA and I will need to build all three for this project.
    153 
    154 \paragraph{OS Abstraction}
    155 One of the fundamental part of this converting blocking I/O operations into non-blocking ones. This relies on having an underlying asynchronous I/O interface to which to direct the I/O operations. While there exists many different APIs for asynchronous I/O, it is not part of this proposal to create a novel API, simply to use an existing one that is sufficient. uC++ uses the \texttt{select} as its interface, which handles pipes and sockets. It entails significant complexity and has performances problems which make it a less interesting alternative. Another interface which is becoming popular recently\cit is \texttt{epoll}. However, epoll also does not handle file system and seems to have problem to linux pipes and \texttt{TTY}s\cit. A very recent alternative that must still be investigated is \texttt{io\_uring}. It claims to address some of the issues with \texttt{epoll} but is too recent to be confident that it does. Finally, a popular cross-platform alternative is \texttt{libuv}, which offers asynchronous sockets and asynchronous file system operations (among other features). However, as a full-featured library it includes much more than what is needed and could conflict with other features of \CFA unless significant efforts are made to merge them together.
    156 
    157 \paragraph{Event-Engine}
    158 Laying on top of the asynchronous interface layer is the event-engine. This engine is responsible for multiplexing (batching) the synchronous I/O requests into an asynchronous I/O request and demultiplexing the results onto appropriate blocked threads. This can be straightforward for the simple cases, but can become quite complex. Decisions that will need to be made include : whether to poll from a seperate kernel thread or a regularly scheduled user thread, what should be the ordering used when results satisfy many requests, how to handle threads waiting for multiple operations, etc.
    159 
    160 \paragraph{Interface}
    161 Finally, for these components to be available, it is necessary to expose them through a synchronous interface. This can be a novel interface but it is preferrable to attempt to intercept the existing POSIX interface in order to be compatible with existing code. This will allow C programs written using this interface to be transparently converted to \CFA with minimal effeort. Where this is not applicable, a novel interface will be created to fill the gaps.
    162 
    163 
    164 % ===============================================================================
    165 % ===============================================================================
    166 \section{Discussion}
    167 
    168 
    169 % ===============================================================================
    170 % ===============================================================================
    171 \section{Timeline}
     123While this is not a bounded guarantee, the probability that problems persist for long periods of times decreases exponentially, making persisting problems virtually impossible.
     124
     125% ===============================================================================
     126% ===============================================================================
     127% \section{Proposal}
     128
     129% \subsection{Ready-Queue}
     130% Using trevor's paper\cit as basis, it is simple to build a relaxed FIFO list that is fast and scalable for loaded or overloaded systems. The described queue uses an array of underlying strictly FIFO queue. Pushing new data is done by selecting one of these underlying queues at random, recording a timestamp for the push and pushing to the selected queue. Popping is done by selecting two queues at random and popping from the queue for which the head has the oldest timestamp. In loaded or overloaded systems, it is higly likely that the queues is far from empty, e.i., several tasks are on each of the underlying queues. This means that selecting a queue at random to pop from is higly likely to yield a queue that is not empty.
     131
     132% When the ready queue is "more empty", i.e., several of the inner queues are empty, selecting a random queue for popping is less likely to yield a valid selection and more attempts need to be made, resulting in a performance degradation. In cases, with few elements on the ready queue and few processors running, performance can be improved by adding information to help processors find which inner queues are used. Preliminary performance tests indicate that with few processors, a bitmask can be used to identify which inner queues are currently in use. This is especially effective in the single-thread case, where the bitmask will always be up-to-date. Furthermore, modern x86 CPUs have a BMI2 extension which allow using the bitmask with very little overhead over directly accessing the readyqueue offerring decent performance even in cases with many empty inner queues. This technique does not solve the problem completely, it randomly attempts to find a block of 64 queues where at least one is used, instead of attempting to find a used queue. For systems with a large number of cores this does not completely solve the problem, but it is a fixed improvement. The size of the blocks are limited by the maximum size atomic instruction can operate on, therefore atomic instructions on large words would increase the 64 queues per block limit.
     133
     134% \TODO double check the next sentence
     135% Preliminary result indicate that the bitmask approach with the BMI2 extension can lead to multi-threaded performance that is contention agnostic in the worst case.
     136% This result suggests that the contention penalty and the increase performance for additionnal thread cancel each other exactly. This may indicate that a relatively small reduction in contention may tip the performance into positive scalling even for the worst case. It can be noted that in cases of high-contention, the use of the bitmask to find queues that are not empty is much less reliable. Indeed, if contention on the bitmask is high, it means it probably changes significantly between the moment it is read and the actual operation on the queues it represents. Furthermore, the objective of the bitmask is to avoid probing queues that are empty. Therefore, in cases where the bitmask is highly contented, it may be preferrable to probe queues randomly, either until contention decreases or until a prior prefetch of the bitmask completes. Ideally, the scheduler would be able to observe that the bitmask is highly contented and adjust its behaviour appropriately. However, I am not aware of any mechanism to query whether a cacheline is in cache or to run other instructions until a cacheline is fetch without blocking on the cacheline. As such, an alternative that may have a similar impact would be for each thread to have their own bitmask, which would be updated both after each scheduler action and after a certain number of failed probing. If the bitmask has little contention, the local bitmask will be mostly up-to-date and several threads won't need to contend as much on the global bitmask. If the bitmask has significant contention, then fetching it becomes more expensive and threads may as well probe randomly. This solution claims that probing randomly or against an out-of-date bitmask is equivalent.
     137
     138% In cases where this is insufficient, another approach is to use a hiearchical data structure. Creating a tree of nodes to reduce contention has been shown to work in similar cases\cit(SNZI: Scalable NonZero Indicators)\footnote{This particular paper seems to be patented in the US. How does that affect \CFA? Can I use it in my work?}. However, this approach may lead to poorer single-threaded performance due to the inherent pointer chasing, as such, it was not considered as the first approach but as a fallback in case the bitmask approach does not satisfy the performance goals.
     139
     140% Part of this performance relies on contention being low when there are few threads on the readyqueue. However, this can be assumed reliably if the system handles putting idle processors to sleep, which is addressed in section \ref{sleep}.
     141
     142% \paragraph{Objectives and Existing Work}
     143% How much scalability is actually needed is highly debatable, libfibre\cit is has compared favorably to other schedulers in webserver tests\cit and uses a single atomic counter in its scheduling algorithm similarly to the proposed bitmask. As such the single atomic instruction on a shared cacheline may be sufficiently performant.
     144
     145% I have built a prototype of this ready-queue (including the bitmask and BMI2 usage, but not the sharded bitmask) and ran performance experiments on it but it is difficult to compare this prototype to a thread scheduler as the prototype is used as a data-queue. I have also integrated this prototype into the \CFA runtime, but have not yet created performance experiments to compare results. I believe that the bitmask approach is currently one of the larger risks of the proposal, early tests lead me to believe it may work but it is not clear that the contention problem can be overcome. The worst-case scenario is a case where the number of processors and the number of ready threads are similar, yet scheduling events are very frequent. Fewer threads should lead to the Idle Sleep mechanism reducing contention while having many threads ready leads to optimal performance. It is difficult to evaluate the likeliness of this worst-case scenario in real workloads. I believe, frequent scheduling events suggest a more ``bursty'' workload where new work is finely divided among many threads which race to completion. This type of workload would only see a peek of contention close to the end of the work, but no sustained contention. Very fine-grained pipelines are less ``bursty'', these may lead to more sustained contention. However, they could also easily benefit from a direct hand-off strategy which would circumvent the problem entirely.
     146
     147% \subsection{Dynamic Resizing}
     148% The \CFA runtime system currently handles dynamically adding and removing processors from clusters at any time. Since this is part of the existing design, the proposed scheduler must also support this behaviour. However, dynamicly resizing the clusters is considered a rare event associated with setup, teardown and major configuration changes. This assumptions is made both in the design of the proposed scheduler as well as in the original design of the \CFA runtime system. As such, the proposed scheduler must honor the correctness of these behaviour but does not have any performance objectives with regards to resizing a cluster. How long adding or removing processors take and how much this disrupts the performance of other threads is considered a secondary concern since it should be amortized over long period of times. This description effectively matches with te description of a Reader-Writer lock, in frequent but invasive updates among frequent (mostly) read operations. In the case of the Ready-Queue described above, read operations are operations that push or pop from the ready-queue but do not invalidate any references to the ready queue data structures. Writes on the other-hand would add or remove inner queues, invalidating references to the array of inner queues in the process. Therefore, the current proposed approach to this problem is the add a per-cluster Reader Writer lock around the ready queue to prevent restructuring of the ready-queue data structure while threads are being pushed or popped.
     149
     150% There are possible alternatives to the Reader Writer lock solution. This problem is effectively a memory reclamation problem and as such there is a large body of research on the subject. However, the RWlock solution is simple and can be leveraged to solve other problems (e.g. processor ordering and memory reclamation of threads) which makes it an attractive solution.
     151
     152% \paragraph{Objectives and Existing Work}
     153% The lock must offer scalability and performance on par with the actual ready-queue in order not to introduce a new bottle neck. I have already built a lock that fits the desired requirements and preliminary testing show scalability and performance that exceed the target. As such, I do not consider this lock to be a risk on this project.
     154
     155% \subsection{Idle Sleep} \label{sleep}
     156% As mentionned above, idle sleep is the process of putting processors to sleep while they do not have threads to execute. In this context processors are kernel-threads and sleeping refers to asking the kernel to block a thread. This can be achieved with either thread synchronization operations like pthread\_cond\_wait or using signal operations like sigsuspend.
     157
     158% Support for idle sleep broadly involves calling the operating system to block the kernel thread but also handling the race between the sleeping and the waking up, and handling which kernel thread should sleep or wake-up.
     159
     160% When a processor decides to sleep, there is a race that occurs between it signalling that it will go to sleep (so other processors can find sleeping processors) and actually blocking the kernel thread. This is equivalent to the classic problem of missing signals when using condition variables, the ``sleepy'' processor indicates that it will sleep but has not yet gone to sleep, if another processor attempts to wake it up, the waking-up operation may claim nothing needs to be done and the signal will have been missed. In cases where threads are scheduled from processors on the current cluster, loosing signals is not necessarily critical, because at least some processors on the cluster are awake. Individual processors always finish shceduling threads before looking for new work, which means that the last processor to go to sleep cannot miss threads scheduled from inside the cluster (if they do, that demonstrates the ready-queue is not linearizable). However, this guarantee does not hold if threads are shceduled from outside the cluster, either due to an external event like timers and I/O, or due to a thread migrating from a different cluster. In this case, missed signals can lead to the cluster deadlocking where it should not\footnote{Clusters ``should'' never deadlock, but for this proposal, cases where \CFA users \emph{actually} wrote \CFA code that leads to a deadlock it is considered as a deadlock that ``should'' happen. }. Therefore, it is important that the scheduling of threads include a mechanism where signals \emph{cannot} be missed. For performance reasons, it can be advantageous to have a secondary mechanism that allows signals to be missed in cases where it cannot lead to a deadlock. To be safe, this process must include a ``handshake'' where it is guaranteed that either~: the sleepy processor notices that a thread was scheduled after it signalled its intent to block or code scheduling threads well see the intent to sleep before scheduling and be able to wake-up the processor. This matter is complicated by the fact that pthread offers few tools to implement this solution and offers no guarantee of ordering of threads waking up for most of these tools.
     161
     162% Another issues is trying to avoid kernel sleeping and waking frequently. A possible partial solution is to order the processors so that the one which most recently went to sleep is woken up. This allows other sleeping processors to reach deeper sleep state (when these are available) while keeping ``hot'' processors warmer. Note that while this generally means organising the processors in a stack, I believe that the unique index provided by the ReaderWriter lock can be reused to strictly order the waking order of processors, causing a LIFO like waking order. While a strict LIFO stack is probably better, using the processor index could proove useful and offer a sufficiently LIFO ordering.
     163
     164% Finally, another important aspect of Idle Sleep is when should processors make the decision to sleep and when it is appropriate for sleeping processors to be woken up. Processors that are unnecessarily awake lead to unnecessary contention and power consumption, while too many sleeping processors can lead to sub-optimal throughput. Furthermore, transitions from sleeping to awake and vice-versa also add unnecessary latency. There is already a wealth of research on the subject and I do not plan to implement a novel idea for the Idle Sleep heuristic in this project.
     165
     166% \subsection{Asynchronous I/O}
     167% The final aspect of this proposal is asynchronous I/O. Without it, user threads that execute I/O operations will block the underlying kernel thread. This leads to poor throughput, it would be preferrable to block the user-thread and reuse the underlying kernel-thread to run other ready threads. This requires intercepting the user-threads' calls to I/O operations, redirecting them to an asynchronous I/O interface and handling the multiplexing between the synchronous and asynchronous API. As such, these are the three components needed to implemented to support asynchronous I/O : an OS abstraction layer over the asynchronous interface, an event-engine to (de)multiplex the operations and a synchronous interface for users to use. None of these components currently exist in \CFA and I will need to build all three for this project.
     168
     169% \paragraph{OS Abstraction}
     170% One of the fundamental part of this converting blocking I/O operations into non-blocking ones. This relies on having an underlying asynchronous I/O interface to which to direct the I/O operations. While there exists many different APIs for asynchronous I/O, it is not part of this proposal to create a novel API, simply to use an existing one that is sufficient. uC++ uses the \texttt{select} as its interface, which handles pipes and sockets. It entails significant complexity and has performances problems which make it a less interesting alternative. Another interface which is becoming popular recently\cit is \texttt{epoll}. However, epoll also does not handle file system and seems to have problem to linux pipes and \texttt{TTY}s\cit. A very recent alternative that must still be investigated is \texttt{io\_uring}. It claims to address some of the issues with \texttt{epoll} but is too recent to be confident that it does. Finally, a popular cross-platform alternative is \texttt{libuv}, which offers asynchronous sockets and asynchronous file system operations (among other features). However, as a full-featured library it includes much more than what is needed and could conflict with other features of \CFA unless significant efforts are made to merge them together.
     171
     172% \paragraph{Event-Engine}
     173% Laying on top of the asynchronous interface layer is the event-engine. This engine is responsible for multiplexing (batching) the synchronous I/O requests into an asynchronous I/O request and demultiplexing the results onto appropriate blocked threads. This can be straightforward for the simple cases, but can become quite complex. Decisions that will need to be made include : whether to poll from a seperate kernel thread or a regularly scheduled user thread, what should be the ordering used when results satisfy many requests, how to handle threads waiting for multiple operations, etc.
     174
     175% \paragraph{Interface}
     176% Finally, for these components to be available, it is necessary to expose them through a synchronous interface. This can be a novel interface but it is preferrable to attempt to intercept the existing POSIX interface in order to be compatible with existing code. This will allow C programs written using this interface to be transparently converted to \CFA with minimal effeort. Where this is not applicable, a novel interface will be created to fill the gaps.
     177
     178
     179% % ===============================================================================
     180% % ===============================================================================
     181% \section{Discussion}
     182
     183
     184% % ===============================================================================
     185% % ===============================================================================
     186% \section{Timeline}
    172187
    173188
Note: See TracChangeset for help on using the changeset viewer.