source: src/Parser/parser.yy @ f85bc15

ADTaaron-thesisarm-ehast-experimentalcleanup-dtorsdeferred_resndemanglerenumforall-pointer-decayjacob/cs343-translationjenkins-sandboxnew-astnew-ast-unique-exprno_listpersistent-indexerpthread-emulationqualifiedEnum
Last change on this file since f85bc15 was 0a73148, checked in by Peter A. Buhr <pabuhr@…>, 6 years ago

fix conflict

  • Property mode set to 100644
File size: 126.6 KB
Line 
1//
2// Cforall Version 1.0.0 Copyright (C) 2015 University of Waterloo
3//
4// The contents of this file are covered under the licence agreement in the
5// file "LICENCE" distributed with Cforall.
6//
7// parser.yy --
8//
9// Author           : Peter A. Buhr
10// Created On       : Sat Sep  1 20:22:55 2001
11// Last Modified By : Peter A. Buhr
12// Last Modified On : Thu Jul 12 16:16:25 2018
13// Update Count     : 3756
14//
15
16// This grammar is based on the ANSI99/11 C grammar, specifically parts of EXPRESSION and STATEMENTS, and on the C
17// grammar by James A. Roskind, specifically parts of DECLARATIONS and EXTERNAL DEFINITIONS.  While parts have been
18// copied, important changes have been made in all sections; these changes are sufficient to constitute a new grammar.
19// In particular, this grammar attempts to be more syntactically precise, i.e., it parses less incorrect language syntax
20// that must be subsequently rejected by semantic checks.  Nevertheless, there are still several semantic checks
21// required and many are noted in the grammar. Finally, the grammar is extended with GCC and CFA language extensions.
22
23// Acknowledgments to Richard Bilson, Glen Ditchfield, and Rodolfo Gabriel Esteves who all helped when I got stuck with
24// the grammar.
25
26// The root language for this grammar is ANSI99/11 C. All of ANSI99/11 is parsed, except for:
27//
28// 1. designation with '=' (use ':' instead)
29//
30// Most of the syntactic extensions from ANSI90 to ANSI11 C are marked with the comment "C99/C11". This grammar also has
31// two levels of extensions. The first extensions cover most of the GCC C extensions, except for:
32//
33// 1. designation with and without '=' (use ':' instead)
34// 2. attributes not allowed in parenthesis of declarator
35//
36// All of the syntactic extensions for GCC C are marked with the comment "GCC". The second extensions are for Cforall
37// (CFA), which fixes several of C's outstanding problems and extends C with many modern language concepts. All of the
38// syntactic extensions for CFA C are marked with the comment "CFA". As noted above, there is one unreconcileable
39// parsing problem between C99 and CFA with respect to designators; this is discussed in detail before the "designation"
40// grammar rule.
41
42%{
43#define YYDEBUG_LEXER_TEXT (yylval)                                             // lexer loads this up each time
44#define YYDEBUG 1                                                                               // get the pretty debugging code to compile
45#define YYERROR_VERBOSE                                                                 // more information in syntax errors
46
47#undef __GNUC_MINOR__
48
49#include <cstdio>
50#include <stack>
51using namespace std;
52
53#include "ParseNode.h"
54#include "TypedefTable.h"
55#include "TypeData.h"
56#include "LinkageSpec.h"
57#include "Common/SemanticError.h"                                               // error_str
58#include "Common/utility.h"                                                             // for maybeMoveBuild, maybeBuild, CodeLo...
59
60extern DeclarationNode * parseTree;
61extern LinkageSpec::Spec linkage;
62extern TypedefTable typedefTable;
63
64stack< LinkageSpec::Spec > linkageStack;
65
66bool appendStr( string & to, string & from ) {
67        // 1. Multiple strings are concatenated into a single string but not combined internally. The reason is that
68        //    "\x12" "3" is treated as 2 characters versus 1 because "escape sequences are converted into single members of
69        //    the execution character set just prior to adjacent string literal concatenation" (C11, Section 6.4.5-8). It is
70        //    easier to let the C compiler handle this case.
71        //
72        // 2. String encodings are transformed into canonical form (one encoding at start) so the encoding can be found
73        //    without searching the string, e.g.: "abc" L"def" L"ghi" => L"abc" "def" "ghi". Multiple encodings must match,
74        //    i.e., u"a" U"b" L"c" is disallowed.
75
76        if ( from[0] != '"' ) {                                                         // encoding ?
77                if ( to[0] != '"' ) {                                                   // encoding ?
78                        if ( to[0] != from[0] || to[1] != from[1] ) { // different encodings ?
79                                yyerror( "non-matching string encodings for string-literal concatenation" );
80                                return false;                                                   // parse error, must call YYERROR in action
81                        } else if ( from[1] == '8' ) {
82                                from.erase( 0, 1 );                                             // remove 2nd encoding
83                        } // if
84                } else {
85                        if ( from[1] == '8' ) {                                         // move encoding to start
86                                to = "u8" + to;
87                                from.erase( 0, 1 );                                             // remove 2nd encoding
88                        } else {
89                                to = from[0] + to;
90                        } // if
91                } // if
92                from.erase( 0, 1 );                                                             // remove 2nd encoding
93        } // if
94        to += " " + from;                                                                       // concatenated into single string
95        return true;
96} // appendStr
97
98DeclarationNode * distAttr( DeclarationNode * specifier, DeclarationNode * declList ) {
99        // distribute declaration_specifier across all declared variables, e.g., static, const, __attribute__.
100        DeclarationNode * cur = declList, * cl = (new DeclarationNode)->addType( specifier );
101        //cur->addType( specifier );
102        for ( cur = dynamic_cast< DeclarationNode * >( cur->get_next() ); cur != nullptr; cur = dynamic_cast< DeclarationNode * >( cur->get_next() ) ) {
103                cl->cloneBaseType( cur );
104        } // for
105        declList->addType( cl );
106//      delete cl;
107        return declList;
108} // distAttr
109
110void distExt( DeclarationNode * declaration ) {
111        // distribute EXTENSION across all declarations
112        for ( DeclarationNode *iter = declaration; iter != nullptr; iter = (DeclarationNode *)iter->get_next() ) {
113                iter->set_extension( true );
114        } // for
115} // distExt
116
117void distQual( DeclarationNode * declaration, DeclarationNode * qualifiers ) {
118        // distribute qualifiers across all non-variable declarations in a distribution statemement
119        for ( DeclarationNode * iter = declaration; iter != nullptr; iter = (DeclarationNode *)iter->get_next() ) {
120                // SKULLDUGGERY: Distributions are parsed inside out, so qualifiers are added to declarations inside out. Since
121                // addQualifiers appends to the back of the list, the forall clauses are in the wrong order (right to left). To
122                // get the qualifiers in the correct order and still use addQualifiers (otherwise, 90% of addQualifiers has to
123                // be copied to add to front), the appropriate forall pointers are interchanged before calling addQualifiers.
124                DeclarationNode * clone = qualifiers->clone();
125                if ( qualifiers->type ) {                                               // forall clause ? (handles SC)
126                        if ( iter->type->kind == TypeData::Aggregate ) { // struct/union ?
127                                swap( clone->type->forall, iter->type->aggregate.params );
128                                iter->addQualifiers( clone );
129                        } else if ( iter->type->kind == TypeData::AggregateInst && iter->type->aggInst.aggregate->aggregate.body ) { // struct/union ?
130                                // Create temporary node to hold aggregate, call addQualifiers as above, then put nodes back together.
131                                DeclarationNode newnode;
132                                swap( newnode.type, iter->type->aggInst.aggregate );
133                                swap( clone->type->forall, newnode.type->aggregate.params );
134                                newnode.addQualifiers( clone );
135                                swap( newnode.type, iter->type->aggInst.aggregate );
136                        } else if ( iter->type->kind == TypeData::Function ) { // routines ?
137                                swap( clone->type->forall, iter->type->forall );
138                                iter->addQualifiers( clone );
139                        } // if
140                } else {                                                                                // just SC qualifiers
141                        iter->addQualifiers( clone );
142                } // if
143        } // for
144        delete qualifiers;
145} // distQual
146
147// There is an ambiguity for inline generic-routine return-types and generic routines.
148//   forall( otype T ) struct S { int i; } bar( T ) {}
149// Does the forall bind to the struct or the routine, and how would it be possible to explicitly specify the binding.
150//   forall( otype T ) struct S { int T; } forall( otype W ) bar( W ) {}
151// Currently, the forall is associated with the routine, and the generic type has to be separately defined:
152//   forall( otype T ) struct S { int T; };
153//   forall( otype W ) bar( W ) {}
154
155void rebindForall( DeclarationNode * declSpec, DeclarationNode * funcDecl ) {
156        if ( declSpec->type->kind == TypeData::Aggregate ) { // ignore aggregate definition
157                funcDecl->type->forall = declSpec->type->aggregate.params; // move forall from aggregate to function type
158                declSpec->type->aggregate.params = nullptr;
159        } // if
160} // rebindForall
161
162NameExpr * build_postfix_name( const string * name ) {
163        NameExpr * new_name = build_varref( new string( "?`" + *name ) );
164        delete name;
165        return new_name;
166} // build_postfix_name
167
168bool forall = false, yyy = false;                                               // aggregate have one or more forall qualifiers ?
169
170// https://www.gnu.org/software/bison/manual/bison.html#Location-Type
171#define YYLLOC_DEFAULT(Cur, Rhs, N)                                                                                             \
172if ( N ) {                                                                                                                                              \
173        (Cur).first_line   = YYRHSLOC( Rhs, 1 ).first_line;                                                     \
174        (Cur).first_column = YYRHSLOC( Rhs, 1 ).first_column;                                           \
175        (Cur).last_line    = YYRHSLOC( Rhs, N ).last_line;                                                      \
176        (Cur).last_column  = YYRHSLOC( Rhs, N ).last_column;                                            \
177        (Cur).filename     = YYRHSLOC( Rhs, 1 ).filename;                                                       \
178} else {                                                                                                                                                \
179        (Cur).first_line   = (Cur).last_line = YYRHSLOC( Rhs, 0 ).last_line;            \
180        (Cur).first_column = (Cur).last_column = YYRHSLOC( Rhs, 0 ).last_column;        \
181        (Cur).filename     = YYRHSLOC( Rhs, 0 ).filename;                                                       \
182}
183%}
184
185%define parse.error verbose
186
187// Types declaration for productions
188%union
189{
190        Token tok;
191        ParseNode * pn;
192        ExpressionNode * en;
193        DeclarationNode * decl;
194        DeclarationNode::Aggregate aggKey;
195        DeclarationNode::TypeClass tclass;
196        StatementNode * sn;
197        WaitForStmt * wfs;
198        Expression * constant;
199        IfCtl * ifctl;
200        ForCtl * fctl;
201        LabelNode * label;
202        InitializerNode * in;
203        OperKinds op;
204        std::string * str;
205        bool flag;
206        CatchStmt::Kind catch_kind;
207        GenericExpr * genexpr;
208}
209
210//************************* TERMINAL TOKENS ********************************
211
212// keywords
213%token TYPEDEF
214%token EXTERN STATIC AUTO REGISTER
215%token THREADLOCAL                                                                              // C11
216%token INLINE FORTRAN                                                                   // C99, extension ISO/IEC 9899:1999 Section J.5.9(1)
217%token NORETURN                                                                                 // C11
218%token CONST VOLATILE
219%token RESTRICT                                                                                 // C99
220%token ATOMIC                                                                                   // C11
221%token FORALL MUTEX VIRTUAL                                                             // CFA
222%token VOID CHAR SHORT INT LONG FLOAT DOUBLE SIGNED UNSIGNED
223%token BOOL COMPLEX IMAGINARY                                                   // C99
224%token INT128 FLOAT80 FLOAT128                                                  // GCC
225%token ZERO_T ONE_T                                                                             // CFA
226%token VALIST                                                                                   // GCC
227%token TYPEOF LABEL                                                                             // GCC
228%token ENUM STRUCT UNION
229%token EXCEPTION                                                                                // CFA
230%token COROUTINE MONITOR THREAD                                                 // CFA
231%token OTYPE FTYPE DTYPE TTYPE TRAIT                                    // CFA
232%token SIZEOF OFFSETOF
233%token ATTRIBUTE EXTENSION                                                              // GCC
234%token IF ELSE SWITCH CASE DEFAULT DO WHILE FOR BREAK CONTINUE GOTO RETURN
235%token CHOOSE DISABLE ENABLE FALLTHRU FALLTHROUGH TRY CATCH CATCHRESUME FINALLY THROW THROWRESUME AT WITH WHEN WAITFOR // CFA
236%token ASM                                                                                              // C99, extension ISO/IEC 9899:1999 Section J.5.10(1)
237%token ALIGNAS ALIGNOF GENERIC STATICASSERT                             // C11
238
239// names and constants: lexer differentiates between identifier and typedef names
240%token<tok> IDENTIFIER                  QUOTED_IDENTIFIER               TYPEDEFname                             TYPEGENname
241%token<tok> TIMEOUT                             WOR
242%token<tok> ATTR_IDENTIFIER             ATTR_TYPEDEFname                ATTR_TYPEGENname
243%token<tok> INTEGERconstant             CHARACTERconstant               STRINGliteral
244%token<tok> DIRECTIVE
245// Floating point constant is broken into three kinds of tokens because of the ambiguity with tuple indexing and
246// overloading constants 0/1, e.g., x.1 is lexed as (x)(.1), where (.1) is a factional constant, but is semantically
247// converted into the tuple index (.)(1). e.g., 3.x
248%token<tok>     FLOATING_DECIMALconstant        FLOATING_FRACTIONconstant       FLOATINGconstant
249
250// multi-character operators
251%token ARROW                                                                                    // ->
252%token ICR DECR                                                                                 // ++   --
253%token LS RS                                                                                    // <<   >>
254%token LE GE EQ NE                                                                              // <=   >=      ==      !=
255%token ANDAND OROR                                                                              // &&   ||
256%token ELLIPSIS                                                                                 // ...
257
258%token EXPassign        MULTassign      DIVassign       MODassign       // \=   *=      /=      %=
259%token PLUSassign       MINUSassign                                                     // +=   -=
260%token LSassign         RSassign                                                        // <<=  >>=
261%token ANDassign        ERassign        ORassign                                // &=   ^=      |=
262
263%token ATassign                                                                                 // @=
264
265%type<tok> identifier  no_attr_identifier
266%type<tok> identifier_or_type_name  no_attr_identifier_or_type_name  attr_name
267%type<tok> quasi_keyword
268%type<constant> string_literal
269%type<str> string_literal_list
270
271// expressions
272%type<en> constant
273%type<en> tuple                                                 tuple_expression_list
274%type<op> ptrref_operator                               unary_operator                          assignment_operator
275%type<en> primary_expression                    postfix_expression                      unary_expression
276%type<en> cast_expression                               exponential_expression          multiplicative_expression       additive_expression
277%type<en> shift_expression                              relational_expression           equality_expression
278%type<en> AND_expression                                exclusive_OR_expression         inclusive_OR_expression
279%type<en> logical_AND_expression                logical_OR_expression
280%type<en> conditional_expression                constant_expression                     assignment_expression           assignment_expression_opt
281%type<en> comma_expression                              comma_expression_opt
282%type<en> argument_expression_list              argument_expression                     default_initialize_opt
283%type<ifctl> if_control_expression
284%type<fctl> for_control_expression
285%type<en> subrange
286%type<decl> asm_name_opt
287%type<en> asm_operands_opt asm_operands_list asm_operand
288%type<label> label_list
289%type<en> asm_clobbers_list_opt
290%type<flag> asm_volatile_opt
291%type<en> handler_predicate_opt
292%type<genexpr> generic_association generic_assoc_list
293
294// statements
295%type<sn> statement                                             labeled_statement                       compound_statement
296%type<sn> statement_decl                                statement_decl_list                     statement_list_nodecl
297%type<sn> selection_statement                   if_statement
298%type<sn> switch_clause_list_opt                switch_clause_list
299%type<en> case_value
300%type<sn> case_clause                                   case_value_list                         case_label                                      case_label_list
301%type<sn> iteration_statement                   jump_statement
302%type<sn> expression_statement                  asm_statement
303%type<sn> with_statement
304%type<en> with_clause_opt
305%type<sn> exception_statement                   handler_clause                          finally_clause
306%type<catch_kind> handler_key
307%type<sn> mutex_statement
308%type<en> when_clause                                   when_clause_opt                         waitfor                                         timeout
309%type<sn> waitfor_statement
310%type<wfs> waitfor_clause
311
312// declarations
313%type<decl> abstract_declarator abstract_ptr abstract_array abstract_function array_dimension multi_array_dimension
314%type<decl> abstract_parameter_declarator abstract_parameter_ptr abstract_parameter_array abstract_parameter_function array_parameter_dimension array_parameter_1st_dimension
315%type<decl> abstract_parameter_declaration
316
317%type<aggKey> aggregate_key
318%type<decl> aggregate_type aggregate_type_nobody
319
320%type<decl> assertion assertion_list assertion_list_opt
321
322%type<en>   bit_subrange_size_opt bit_subrange_size
323
324%type<decl> basic_declaration_specifier basic_type_name basic_type_specifier direct_type indirect_type
325
326%type<decl> trait_declaration trait_declaration_list trait_declaring_list trait_specifier
327
328%type<decl> declaration declaration_list declaration_list_opt declaration_qualifier_list
329%type<decl> declaration_specifier declaration_specifier_nobody declarator declaring_list
330
331%type<decl> elaborated_type elaborated_type_nobody
332
333%type<decl> enumerator_list enum_type enum_type_nobody
334%type<en> enumerator_value_opt
335
336%type<decl> external_definition external_definition_list external_definition_list_opt
337
338%type<decl> exception_declaration
339
340%type<decl> field_declaration field_declaration_list_opt field_declarator_opt field_declaring_list
341%type<en> field field_list field_name fraction_constants_opt
342
343%type<decl> external_function_definition function_definition function_array function_declarator function_no_ptr function_ptr
344
345%type<decl> identifier_parameter_declarator identifier_parameter_ptr identifier_parameter_array identifier_parameter_function
346%type<decl> identifier_list
347
348%type<decl> cfa_abstract_array cfa_abstract_declarator_no_tuple cfa_abstract_declarator_tuple
349%type<decl> cfa_abstract_function cfa_abstract_parameter_declaration cfa_abstract_parameter_list
350%type<decl> cfa_abstract_ptr cfa_abstract_tuple
351
352%type<decl> cfa_array_parameter_1st_dimension
353
354%type<decl> cfa_trait_declaring_list cfa_declaration cfa_field_declaring_list
355%type<decl> cfa_function_declaration cfa_function_return cfa_function_specifier
356
357%type<decl> cfa_identifier_parameter_array cfa_identifier_parameter_declarator_no_tuple
358%type<decl> cfa_identifier_parameter_declarator_tuple cfa_identifier_parameter_ptr
359
360%type<decl> cfa_parameter_declaration cfa_parameter_list cfa_parameter_ellipsis_list_opt
361
362%type<decl> cfa_typedef_declaration cfa_variable_declaration cfa_variable_specifier
363
364%type<decl> c_declaration static_assert
365%type<decl> KR_function_declarator KR_function_no_ptr KR_function_ptr KR_function_array
366%type<decl> KR_parameter_list KR_parameter_list_opt
367
368%type<decl> parameter_declaration parameter_list parameter_type_list_opt
369
370%type<decl> paren_identifier paren_type
371
372%type<decl> storage_class storage_class_list
373
374%type<decl> sue_declaration_specifier sue_declaration_specifier_nobody sue_type_specifier sue_type_specifier_nobody
375
376%type<tclass> type_class
377%type<decl> type_declarator type_declarator_name type_declaring_list
378
379%type<decl> type_declaration_specifier type_type_specifier type_name typegen_name
380%type<decl> typedef typedef_declaration typedef_expression
381
382%type<decl> variable_type_redeclarator type_ptr type_array type_function
383
384%type<decl> type_parameter_redeclarator type_parameter_ptr type_parameter_array type_parameter_function
385
386%type<decl> type type_no_function
387%type<decl> type_parameter type_parameter_list type_initializer_opt
388
389%type<en> type_parameters_opt type_list
390
391%type<decl> type_qualifier type_qualifier_name forall type_qualifier_list_opt type_qualifier_list
392%type<decl> type_specifier type_specifier_nobody
393
394%type<decl> variable_declarator variable_ptr variable_array variable_function
395%type<decl> variable_abstract_declarator variable_abstract_ptr variable_abstract_array variable_abstract_function
396
397%type<decl> attribute_list_opt attribute_list attribute_name_list attribute attribute_name
398
399// initializers
400%type<in>  initializer initializer_list_opt initializer_opt
401
402// designators
403%type<en>  designator designator_list designation
404
405
406// Handle shift/reduce conflict for dangling else by shifting the ELSE token. For example, this string is ambiguous:
407//   .---------.                                matches IF '(' comma_expression ')' statement . (reduce)
408//   if ( C ) S1 else S2
409//   `-----------------'                matches IF '(' comma_expression ')' statement . (shift) ELSE statement */
410// Similar issues exit with the waitfor statement.
411
412// Order of these lines matters (low-to-high precedence). THEN is left associative over WOR/TIMEOUT/ELSE, WOR is left
413// associative over TIMEOUT/ELSE, and TIMEOUT is left associative over ELSE.
414%precedence THEN        // rule precedence for IF/WAITFOR statement
415%precedence WOR         // token precedence for start of WOR in WAITFOR statement
416%precedence TIMEOUT     // token precedence for start of TIMEOUT in WAITFOR statement
417%precedence ELSE        // token precedence for start of else clause in IF/WAITFOR statement
418
419// Handle shift/reduce conflict for generic type by shifting the '(' token. For example, this string is ambiguous:
420//   forall( otype T ) struct Foo { T v; };
421//       .-----.                                matches pointer to function returning a generic (which is impossible without a type)
422//   Foo ( *fp )( int );
423//   `---'                                              matches start of TYPEGENname '('
424// must be:
425//   Foo( int ) ( *fp )( int );
426// The same problem occurs here:
427//   forall( otype T ) struct Foo { T v; } ( *fp )( int );
428// must be:
429//   forall( otype T ) struct Foo { T v; } ( int ) ( *fp )( int );
430
431// Order of these lines matters (low-to-high precedence).
432%precedence TYPEGENname
433%precedence '}'
434%precedence '('
435
436%locations                                                                                              // support location tracking for error messages
437
438%start translation_unit                                                                 // parse-tree root
439
440%%
441//************************* Namespace Management ********************************
442
443// The C grammar is not context free because it relies on the distinct terminal symbols "identifier" and "TYPEDEFname",
444// which are lexically identical.
445//
446//   typedef int foo; // identifier foo must now be scanned as TYPEDEFname
447//   foo f;           // to allow it to appear in this context
448//
449// While it may be possible to write a purely context-free grammar, such a grammar would obscure the relationship
450// between syntactic and semantic constructs.  Cforall compounds this problem by introducing type names local to the
451// scope of a declaration (for instance, those introduced through "forall" qualifiers), and by introducing "type
452// generators" -- parameterized types.  This latter type name creates a third class of identifiers, "TYPEGENname", which
453// must be distinguished by the lexical scanner.
454//
455// Since the scanner cannot distinguish among the different classes of identifiers without some context information,
456// there is a type table (typedefTable), which holds type names and identifiers that override type names, for each named
457// scope. During parsing, semantic actions update the type table by adding new identifiers in the current scope. For
458// each context that introduces a name scope, a new level is created in the type table and that level is popped on
459// exiting the scope.  Since type names can be local to a particular declaration, each declaration is itself a scope.
460// This requires distinguishing between type names that are local to the current declaration scope and those that
461// persist past the end of the declaration (i.e., names defined in "typedef" or "otype" declarations).
462//
463// The non-terminals "push" and "pop" denote the opening and closing of named scopes. Every push has a matching pop in
464// the production rule. There are multiple lists of declarations, where each declaration is a named scope, so pop/push
465// around the list separator.
466//
467//  int f( forall(T) T (*f1) T , forall( S ) S (*f2)( S ) );
468//      push               pop   push                   pop
469
470push:
471                { typedefTable.enterScope(); }
472        ;
473
474pop:
475                { typedefTable.leaveScope(); }
476        ;
477
478//************************* CONSTANTS ********************************
479
480constant:
481                // ENUMERATIONconstant is not included here; it is treated as a variable with type "enumeration constant".
482        INTEGERconstant                                                         { $$ = new ExpressionNode( build_constantInteger( *$1 ) ); }
483        | FLOATING_DECIMALconstant                                      { $$ = new ExpressionNode( build_constantFloat( *$1 ) ); }
484        | FLOATING_FRACTIONconstant                                     { $$ = new ExpressionNode( build_constantFloat( *$1 ) ); }
485        | FLOATINGconstant                                                      { $$ = new ExpressionNode( build_constantFloat( *$1 ) ); }
486        | CHARACTERconstant                                                     { $$ = new ExpressionNode( build_constantChar( *$1 ) ); }
487        ;
488
489quasi_keyword:                                                                                  // CFA
490        TIMEOUT
491        | WOR
492        ;
493
494identifier:
495        IDENTIFIER
496        | ATTR_IDENTIFIER                                                                       // CFA
497        | quasi_keyword
498        ;
499
500no_attr_identifier:
501        IDENTIFIER
502        | quasi_keyword
503        ;
504
505string_literal:
506        string_literal_list                                                     { $$ = build_constantStr( *$1 ); }
507        ;
508
509string_literal_list:                                                                    // juxtaposed strings are concatenated
510        STRINGliteral                                                           { $$ = $1; } // conversion from tok to str
511        | string_literal_list STRINGliteral
512                {
513                        if ( ! appendStr( *$1, *$2 ) ) YYERROR;         // append 2nd juxtaposed string to 1st
514                        delete $2;                                                                      // allocated by lexer
515                        $$ = $1;                                                                        // conversion from tok to str
516                }
517        ;
518
519//************************* EXPRESSIONS ********************************
520
521primary_expression:
522        IDENTIFIER                                                                                      // typedef name cannot be used as a variable name
523                { $$ = new ExpressionNode( build_varref( $1 ) ); }
524        | quasi_keyword
525                { $$ = new ExpressionNode( build_varref( $1 ) ); }
526        | tuple
527        | '(' comma_expression ')'
528                { $$ = $2; }
529        | '(' compound_statement ')'                                            // GCC, lambda expression
530                { $$ = new ExpressionNode( new StmtExpr( dynamic_cast< CompoundStmt * >(maybeMoveBuild< Statement >($2) ) ) ); }
531        | constant '`' IDENTIFIER                                                       // CFA, postfix call
532                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), $1 ) ); }
533        | string_literal '`' IDENTIFIER                                         // CFA, postfix call
534                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), new ExpressionNode( $1 ) ) ); }
535        | IDENTIFIER '`' IDENTIFIER                                                     // CFA, postfix call
536                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), new ExpressionNode( build_varref( $1 ) ) ) ); }
537        | tuple '`' IDENTIFIER                                                          // CFA, postfix call
538                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), $1 ) ); }
539        | '(' comma_expression ')' '`' IDENTIFIER                       // CFA, postfix call
540                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $5 ) ), $2 ) ); }
541        | type_name '.' no_attr_identifier                                      // CFA, nested type
542                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
543        | type_name '.' '[' field_list ']'                                      // CFA, nested type / tuple field selector
544                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
545        | GENERIC '(' assignment_expression ',' generic_assoc_list ')' // C11
546                {
547                        // add the missing control expression to the GenericExpr and return it
548                        $5->control = maybeMoveBuild<Expression>( $3 );
549                        $$ = new ExpressionNode( $5 );
550                }
551        ;
552
553generic_assoc_list:                                                                             // C11
554        generic_association
555        | generic_assoc_list ',' generic_association
556                {
557                        // steal the association node from the singleton and delete the wrapper
558                        $1->associations.splice($1->associations.end(), $3->associations);
559                        delete $3;
560                        $$ = $1;
561                }
562        ;
563
564generic_association:                                                                    // C11
565        type_no_function ':' assignment_expression
566                {
567                        // create a GenericExpr wrapper with one association pair
568                        $$ = new GenericExpr( nullptr, { { maybeMoveBuildType($1), maybeMoveBuild<Expression>($3) } } );
569                }
570        | DEFAULT ':' assignment_expression
571                { $$ = new GenericExpr( nullptr, { { maybeMoveBuild<Expression>($3) } } ); }
572        ;
573
574postfix_expression:
575        primary_expression
576        | postfix_expression '[' assignment_expression ']'
577                // CFA, comma_expression disallowed in this context because it results in a common user error: subscripting a
578                // matrix with x[i,j] instead of x[i][j]. While this change is not backwards compatible, there seems to be
579                // little advantage to this feature and many disadvantages. It is possible to write x[(i,j)] in CFA, which is
580                // equivalent to the old x[i,j].
581                { $$ = new ExpressionNode( build_binary_val( OperKinds::Index, $1, $3 ) ); }
582        | postfix_expression '{' argument_expression_list '}' // CFA, constructor call
583                {
584                        Token fn;
585                        fn.str = new std::string( "?{}" );                      // location undefined - use location of '{'?
586                        $$ = new ExpressionNode( new ConstructorExpr( build_func( new ExpressionNode( build_varref( fn ) ), (ExpressionNode *)( $1 )->set_last( $3 ) ) ) );
587                }
588        | postfix_expression '(' argument_expression_list ')'
589                { $$ = new ExpressionNode( build_func( $1, $3 ) ); }
590        | postfix_expression '.' no_attr_identifier
591                { $$ = new ExpressionNode( build_fieldSel( $1, build_varref( $3 ) ) ); }
592        | postfix_expression '.' INTEGERconstant                        // CFA, tuple index
593                { $$ = new ExpressionNode( build_fieldSel( $1, build_constantInteger( *$3 ) ) ); }
594        | postfix_expression FLOATING_FRACTIONconstant          // CFA, tuple index
595                { $$ = new ExpressionNode( build_fieldSel( $1, build_field_name_FLOATING_FRACTIONconstant( *$2 ) ) ); }
596        | postfix_expression '.' '[' field_list ']'                     // CFA, tuple field selector
597                { $$ = new ExpressionNode( build_fieldSel( $1, build_tuple( $4 ) ) ); }
598        | postfix_expression ARROW no_attr_identifier
599                {
600                        $$ = new ExpressionNode( build_pfieldSel( $1, *$3 == "0" || *$3 == "1" ? build_constantInteger( *$3 ) : build_varref( $3 ) ) );
601                }
602        | postfix_expression ARROW INTEGERconstant                      // CFA, tuple index
603                { $$ = new ExpressionNode( build_pfieldSel( $1, build_constantInteger( *$3 ) ) ); }
604        | postfix_expression ARROW '[' field_list ']'           // CFA, tuple field selector
605                { $$ = new ExpressionNode( build_pfieldSel( $1, build_tuple( $4 ) ) ); }
606        | postfix_expression ICR
607                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::IncrPost, $1 ) ); }
608        | postfix_expression DECR
609                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::DecrPost, $1 ) ); }
610        | '(' type_no_function ')' '{' initializer_list_opt comma_opt '}' // C99, compound-literal
611                { $$ = new ExpressionNode( build_compoundLiteral( $2, new InitializerNode( $5, true ) ) ); }
612        | '(' type_no_function ')' '@' '{' initializer_list_opt comma_opt '}' // CFA, explicit C compound-literal
613                { $$ = new ExpressionNode( build_compoundLiteral( $2, (new InitializerNode( $6, true ))->set_maybeConstructed( false ) ) ); }
614        | '^' primary_expression '{' argument_expression_list '}' // CFA
615                {
616                        Token fn;
617                        fn.str = new string( "^?{}" );                          // location undefined
618                        $$ = new ExpressionNode( build_func( new ExpressionNode( build_varref( fn ) ), (ExpressionNode *)( $2 )->set_last( $4 ) ) );
619                }
620        ;
621
622argument_expression_list:
623        argument_expression
624        | argument_expression_list ',' argument_expression
625                { $$ = (ExpressionNode *)( $1->set_last( $3 )); }
626        ;
627
628argument_expression:
629        // empty
630                { $$ = nullptr; }
631        // | '@'                                                                                                // use default argument
632        //      { $$ = new ExpressionNode( build_constantInteger( *new string( "2" ) ) ); }
633        | assignment_expression
634        ;
635
636field_list:                                                                                             // CFA, tuple field selector
637        field
638        | field_list ',' field                                          { $$ = (ExpressionNode *)$1->set_last( $3 ); }
639        ;
640
641field:                                                                                                  // CFA, tuple field selector
642        field_name
643        | FLOATING_DECIMALconstant field
644                { $$ = new ExpressionNode( build_fieldSel( new ExpressionNode( build_field_name_FLOATING_DECIMALconstant( *$1 ) ), maybeMoveBuild<Expression>( $2 ) ) ); }
645        | FLOATING_DECIMALconstant '[' field_list ']'
646                { $$ = new ExpressionNode( build_fieldSel( new ExpressionNode( build_field_name_FLOATING_DECIMALconstant( *$1 ) ), build_tuple( $3 ) ) ); }
647        | field_name '.' field
648                { $$ = new ExpressionNode( build_fieldSel( $1, maybeMoveBuild<Expression>( $3 ) ) ); }
649        | field_name '.' '[' field_list ']'
650                { $$ = new ExpressionNode( build_fieldSel( $1, build_tuple( $4 ) ) ); }
651        | field_name ARROW field
652                { $$ = new ExpressionNode( build_pfieldSel( $1, maybeMoveBuild<Expression>( $3 ) ) ); }
653        | field_name ARROW '[' field_list ']'
654                { $$ = new ExpressionNode( build_pfieldSel( $1, build_tuple( $4 ) ) ); }
655        ;
656
657field_name:
658        INTEGERconstant fraction_constants_opt
659                { $$ = new ExpressionNode( build_field_name_fraction_constants( build_constantInteger( *$1 ), $2 ) ); }
660        | FLOATINGconstant fraction_constants_opt
661                { $$ = new ExpressionNode( build_field_name_fraction_constants( build_field_name_FLOATINGconstant( *$1 ), $2 ) ); }
662        | no_attr_identifier fraction_constants_opt
663                {
664                        $$ = new ExpressionNode( build_field_name_fraction_constants( build_varref( $1 ), $2 ) );
665                }
666        ;
667
668fraction_constants_opt:
669        // empty
670                { $$ = nullptr; }
671        | fraction_constants_opt FLOATING_FRACTIONconstant
672                {
673                        Expression * constant = build_field_name_FLOATING_FRACTIONconstant( *$2 );
674                        $$ = $1 != nullptr ? new ExpressionNode( build_fieldSel( $1,  constant ) ) : new ExpressionNode( constant );
675                }
676        ;
677
678unary_expression:
679        postfix_expression
680                // first location where constant/string can have operator applied: sizeof 3/sizeof "abc" still requires
681                // semantics checks, e.g., ++3, 3--, *3, &&3
682        | constant
683        | string_literal
684                { $$ = new ExpressionNode( $1 ); }
685        | EXTENSION cast_expression                                                     // GCC
686                { $$ = $2->set_extension( true ); }
687                // '*' ('&') is separated from unary_operator because of shift/reduce conflict in:
688                //              { * X; }         // dereference X
689                //              { * int X; } // CFA declaration of pointer to int
690        | ptrref_operator cast_expression                                       // CFA
691                {
692                        switch ( $1 ) {
693                          case OperKinds::AddressOf:
694                                $$ = new ExpressionNode( new AddressExpr( maybeMoveBuild< Expression >( $2 ) ) );
695                                break;
696                          case OperKinds::PointTo:
697                                $$ = new ExpressionNode( build_unary_val( $1, $2 ) );
698                                break;
699                          case OperKinds::And:
700                                $$ = new ExpressionNode( new AddressExpr( new AddressExpr( maybeMoveBuild< Expression >( $2 ) ) ) );
701                                break;
702                          default:
703                                assert( false );
704                        }
705                }
706        | unary_operator cast_expression
707                { $$ = new ExpressionNode( build_unary_val( $1, $2 ) ); }
708        | ICR unary_expression
709                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::Incr, $2 ) ); }
710        | DECR unary_expression
711                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::Decr, $2 ) ); }
712        | SIZEOF unary_expression
713                { $$ = new ExpressionNode( new SizeofExpr( maybeMoveBuild< Expression >( $2 ) ) ); }
714        | SIZEOF '(' type_no_function ')'
715                { $$ = new ExpressionNode( new SizeofExpr( maybeMoveBuildType( $3 ) ) ); }
716        | ALIGNOF unary_expression                                                      // GCC, variable alignment
717                { $$ = new ExpressionNode( new AlignofExpr( maybeMoveBuild< Expression >( $2 ) ) ); }
718        | ALIGNOF '(' type_no_function ')'                                      // GCC, type alignment
719                { $$ = new ExpressionNode( new AlignofExpr( maybeMoveBuildType( $3 ) ) ); }
720        | OFFSETOF '(' type_no_function ',' no_attr_identifier ')'
721                { $$ = new ExpressionNode( build_offsetOf( $3, build_varref( $5 ) ) ); }
722        | ATTR_IDENTIFIER
723                { $$ = new ExpressionNode( new AttrExpr( build_varref( $1 ), maybeMoveBuild< Expression >( (ExpressionNode *)nullptr ) ) ); }
724        | ATTR_IDENTIFIER '(' argument_expression ')'
725                { $$ = new ExpressionNode( new AttrExpr( build_varref( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
726        | ATTR_IDENTIFIER '(' type ')'
727                { $$ = new ExpressionNode( new AttrExpr( build_varref( $1 ), maybeMoveBuildType( $3 ) ) ); }
728        ;
729
730ptrref_operator:
731        '*'                                                                                     { $$ = OperKinds::PointTo; }
732        | '&'                                                                           { $$ = OperKinds::AddressOf; }
733                // GCC, address of label must be handled by semantic check for ref,ref,label
734        | ANDAND                                                                        { $$ = OperKinds::And; }
735        ;
736
737unary_operator:
738        '+'                                                                                     { $$ = OperKinds::UnPlus; }
739        | '-'                                                                           { $$ = OperKinds::UnMinus; }
740        | '!'                                                                           { $$ = OperKinds::Neg; }
741        | '~'                                                                           { $$ = OperKinds::BitNeg; }
742        ;
743
744cast_expression:
745        unary_expression
746        | '(' type_no_function ')' cast_expression
747                { $$ = new ExpressionNode( build_cast( $2, $4 ) ); }
748        | '(' COROUTINE '&' ')' cast_expression                         // CFA
749                { $$ = new ExpressionNode( build_keyword_cast( KeywordCastExpr::Coroutine, $5 ) ); }
750        | '(' THREAD '&' ')' cast_expression                            // CFA
751                { $$ = new ExpressionNode( build_keyword_cast( KeywordCastExpr::Thread, $5 ) ); }
752        | '(' MONITOR '&' ')' cast_expression                           // CFA
753                { $$ = new ExpressionNode( build_keyword_cast( KeywordCastExpr::Monitor, $5 ) ); }
754                // VIRTUAL cannot be opt because of look ahead issues
755        | '(' VIRTUAL ')' cast_expression                                       // CFA
756                { $$ = new ExpressionNode( new VirtualCastExpr( maybeMoveBuild< Expression >( $4 ), maybeMoveBuildType( nullptr ) ) ); }
757        | '(' VIRTUAL type_no_function ')' cast_expression      // CFA
758                { $$ = new ExpressionNode( new VirtualCastExpr( maybeMoveBuild< Expression >( $5 ), maybeMoveBuildType( $3 ) ) ); }
759//      | '(' type_no_function ')' tuple
760//              { $$ = new ExpressionNode( build_cast( $2, $4 ) ); }
761        ;
762
763exponential_expression:
764        cast_expression
765        | exponential_expression '\\' cast_expression
766                { $$ = new ExpressionNode( build_binary_val( OperKinds::Exp, $1, $3 ) ); }
767        ;
768
769multiplicative_expression:
770        exponential_expression
771        | multiplicative_expression '*' exponential_expression
772                { $$ = new ExpressionNode( build_binary_val( OperKinds::Mul, $1, $3 ) ); }
773        | multiplicative_expression '/' exponential_expression
774                { $$ = new ExpressionNode( build_binary_val( OperKinds::Div, $1, $3 ) ); }
775        | multiplicative_expression '%' exponential_expression
776                { $$ = new ExpressionNode( build_binary_val( OperKinds::Mod, $1, $3 ) ); }
777        ;
778
779additive_expression:
780        multiplicative_expression
781        | additive_expression '+' multiplicative_expression
782                { $$ = new ExpressionNode( build_binary_val( OperKinds::Plus, $1, $3 ) ); }
783        | additive_expression '-' multiplicative_expression
784                { $$ = new ExpressionNode( build_binary_val( OperKinds::Minus, $1, $3 ) ); }
785        ;
786
787shift_expression:
788        additive_expression
789        | shift_expression LS additive_expression
790                { $$ = new ExpressionNode( build_binary_val( OperKinds::LShift, $1, $3 ) ); }
791        | shift_expression RS additive_expression
792                { $$ = new ExpressionNode( build_binary_val( OperKinds::RShift, $1, $3 ) ); }
793        ;
794
795relational_expression:
796        shift_expression
797        | relational_expression '<' shift_expression
798                { $$ = new ExpressionNode( build_binary_val( OperKinds::LThan, $1, $3 ) ); }
799        | relational_expression '>' shift_expression
800                { $$ = new ExpressionNode( build_binary_val( OperKinds::GThan, $1, $3 ) ); }
801        | relational_expression LE shift_expression
802                { $$ = new ExpressionNode( build_binary_val( OperKinds::LEThan, $1, $3 ) ); }
803        | relational_expression GE shift_expression
804                { $$ = new ExpressionNode( build_binary_val( OperKinds::GEThan, $1, $3 ) ); }
805        ;
806
807equality_expression:
808        relational_expression
809        | equality_expression EQ relational_expression
810                { $$ = new ExpressionNode( build_binary_val( OperKinds::Eq, $1, $3 ) ); }
811        | equality_expression NE relational_expression
812                { $$ = new ExpressionNode( build_binary_val( OperKinds::Neq, $1, $3 ) ); }
813        ;
814
815AND_expression:
816        equality_expression
817        | AND_expression '&' equality_expression
818                { $$ = new ExpressionNode( build_binary_val( OperKinds::BitAnd, $1, $3 ) ); }
819        ;
820
821exclusive_OR_expression:
822        AND_expression
823        | exclusive_OR_expression '^' AND_expression
824                { $$ = new ExpressionNode( build_binary_val( OperKinds::Xor, $1, $3 ) ); }
825        ;
826
827inclusive_OR_expression:
828        exclusive_OR_expression
829        | inclusive_OR_expression '|' exclusive_OR_expression
830                { $$ = new ExpressionNode( build_binary_val( OperKinds::BitOr, $1, $3 ) ); }
831        ;
832
833logical_AND_expression:
834        inclusive_OR_expression
835        | logical_AND_expression ANDAND inclusive_OR_expression
836                { $$ = new ExpressionNode( build_and_or( $1, $3, true ) ); }
837        ;
838
839logical_OR_expression:
840        logical_AND_expression
841        | logical_OR_expression OROR logical_AND_expression
842                { $$ = new ExpressionNode( build_and_or( $1, $3, false ) ); }
843        ;
844
845conditional_expression:
846        logical_OR_expression
847        | logical_OR_expression '?' comma_expression ':' conditional_expression
848                { $$ = new ExpressionNode( build_cond( $1, $3, $5 ) ); }
849                // FIX ME: computes $1 twice
850        | logical_OR_expression '?' /* empty */ ':' conditional_expression // GCC, omitted first operand
851                { $$ = new ExpressionNode( build_cond( $1, $1, $4 ) ); }
852        ;
853
854constant_expression:
855        conditional_expression
856        ;
857
858assignment_expression:
859                // CFA, assignment is separated from assignment_operator to ensure no assignment operations for tuples
860        conditional_expression
861        | unary_expression assignment_operator assignment_expression
862                { $$ = new ExpressionNode( build_binary_val( $2, $1, $3 ) ); }
863        | unary_expression '=' '{' initializer_list_opt comma_opt '}'
864                { SemanticError( yylloc, "Initializer assignment is currently unimplemented." ); $$ = nullptr; }
865        ;
866
867assignment_expression_opt:
868        // empty
869                { $$ = nullptr; }
870        | assignment_expression
871        ;
872
873assignment_operator:
874        '='                                                                                     { $$ = OperKinds::Assign; }
875        | ATassign                                                                      { $$ = OperKinds::AtAssn; }
876        | EXPassign                                                                     { $$ = OperKinds::ExpAssn; }
877        | MULTassign                                                            { $$ = OperKinds::MulAssn; }
878        | DIVassign                                                                     { $$ = OperKinds::DivAssn; }
879        | MODassign                                                                     { $$ = OperKinds::ModAssn; }
880        | PLUSassign                                                            { $$ = OperKinds::PlusAssn; }
881        | MINUSassign                                                           { $$ = OperKinds::MinusAssn; }
882        | LSassign                                                                      { $$ = OperKinds::LSAssn; }
883        | RSassign                                                                      { $$ = OperKinds::RSAssn; }
884        | ANDassign                                                                     { $$ = OperKinds::AndAssn; }
885        | ERassign                                                                      { $$ = OperKinds::ERAssn; }
886        | ORassign                                                                      { $$ = OperKinds::OrAssn; }
887        ;
888
889tuple:                                                                                                  // CFA, tuple
890                // CFA, one assignment_expression is factored out of comma_expression to eliminate a shift/reduce conflict with
891                // comma_expression in cfa_identifier_parameter_array and cfa_abstract_array
892//      '[' ']'
893//              { $$ = new ExpressionNode( build_tuple() ); }
894//      | '[' push assignment_expression pop ']'
895//              { $$ = new ExpressionNode( build_tuple( $3 ) ); }
896        '[' ',' tuple_expression_list ']'
897                { $$ = new ExpressionNode( build_tuple( (ExpressionNode *)(new ExpressionNode( nullptr ) )->set_last( $3 ) ) ); }
898        | '[' push assignment_expression pop ',' tuple_expression_list ']'
899                { $$ = new ExpressionNode( build_tuple( (ExpressionNode *)$3->set_last( $6 ) ) ); }
900        ;
901
902tuple_expression_list:
903        assignment_expression_opt
904        | tuple_expression_list ',' assignment_expression_opt
905                { $$ = (ExpressionNode *)$1->set_last( $3 ); }
906        ;
907
908comma_expression:
909        assignment_expression
910        | comma_expression ',' assignment_expression
911                { $$ = new ExpressionNode( new CommaExpr( maybeMoveBuild< Expression >( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
912        ;
913
914comma_expression_opt:
915        // empty
916                { $$ = nullptr; }
917        | comma_expression
918        ;
919
920//*************************** STATEMENTS *******************************
921
922statement:
923        labeled_statement
924        | compound_statement
925        | expression_statement
926        | selection_statement
927        | iteration_statement
928        | jump_statement
929        | with_statement
930        | mutex_statement
931        | waitfor_statement
932        | exception_statement
933        | enable_disable_statement
934                { SemanticError( yylloc, "enable/disable statement is currently unimplemented." ); $$ = nullptr; }
935        | asm_statement
936        | DIRECTIVE
937                { $$ = new StatementNode( build_directive( $1 ) ); }
938        ;
939
940labeled_statement:
941                // labels cannot be identifiers 0 or 1 or ATTR_IDENTIFIER
942        identifier_or_type_name ':' attribute_list_opt statement
943                {
944                        $$ = $4->add_label( $1, $3 );
945                }
946        ;
947
948compound_statement:
949        '{' '}'
950                { $$ = new StatementNode( build_compound( (StatementNode *)0 ) ); }
951        | '{' push
952          local_label_declaration_opt                                           // GCC, local labels
953          statement_decl_list                                                           // C99, intermix declarations and statements
954          pop '}'
955                { $$ = new StatementNode( build_compound( $4 ) ); }
956        ;
957
958statement_decl_list:                                                                    // C99
959        statement_decl
960        | statement_decl_list statement_decl
961                { if ( $1 != 0 ) { $1->set_last( $2 ); $$ = $1; } }
962        ;
963
964statement_decl:
965        declaration                                                                                     // CFA, new & old style declarations
966                { $$ = new StatementNode( $1 ); }
967        | EXTENSION declaration                                                         // GCC
968                {
969                        distExt( $2 );
970                        $$ = new StatementNode( $2 );
971                }
972        | function_definition
973                { $$ = new StatementNode( $1 ); }
974        | EXTENSION function_definition                                         // GCC
975                {
976                        distExt( $2 );
977                        $$ = new StatementNode( $2 );
978                }
979        | statement
980        ;
981
982statement_list_nodecl:
983        statement
984        | statement_list_nodecl statement
985                { if ( $1 != 0 ) { $1->set_last( $2 ); $$ = $1; } }
986        ;
987
988expression_statement:
989        comma_expression_opt ';'
990                { $$ = new StatementNode( build_expr( $1 ) ); }
991        ;
992
993selection_statement:
994                        // pop causes a S/R conflict without separating the IF statement into a non-terminal even after resolving
995                        // the inherent S/R conflict with THEN/ELSE.
996        push if_statement pop
997                { $$ = $2; }
998        | SWITCH '(' comma_expression ')' case_clause
999                { $$ = new StatementNode( build_switch( true, $3, $5 ) ); }
1000        | SWITCH '(' comma_expression ')' '{' push declaration_list_opt switch_clause_list_opt pop '}' // CFA
1001                {
1002                        StatementNode *sw = new StatementNode( build_switch( true, $3, $8 ) );
1003                        // The semantics of the declaration list is changed to include associated initialization, which is performed
1004                        // *before* the transfer to the appropriate case clause by hoisting the declarations into a compound
1005                        // statement around the switch.  Statements after the initial declaration list can never be executed, and
1006                        // therefore, are removed from the grammar even though C allows it. The change also applies to choose
1007                        // statement.
1008                        $$ = $7 ? new StatementNode( build_compound( (StatementNode *)((new StatementNode( $7 ))->set_last( sw )) ) ) : sw;
1009                }
1010        | CHOOSE '(' comma_expression ')' case_clause           // CFA
1011                { $$ = new StatementNode( build_switch( false, $3, $5 ) ); }
1012        | CHOOSE '(' comma_expression ')' '{' push declaration_list_opt switch_clause_list_opt pop '}' // CFA
1013                {
1014                        StatementNode *sw = new StatementNode( build_switch( false, $3, $8 ) );
1015                        $$ = $7 ? new StatementNode( build_compound( (StatementNode *)((new StatementNode( $7 ))->set_last( sw )) ) ) : sw;
1016                }
1017        ;
1018
1019if_statement:
1020        IF '(' if_control_expression ')' statement                      %prec THEN
1021                // explicitly deal with the shift/reduce conflict on if/else
1022                { $$ = new StatementNode( build_if( $3, $5, nullptr ) ); }
1023        | IF '(' if_control_expression ')' statement ELSE statement
1024                { $$ = new StatementNode( build_if( $3, $5, $7 ) ); }
1025        ;
1026
1027if_control_expression:
1028        comma_expression
1029                { $$ = new IfCtl( nullptr, $1 ); }
1030        | c_declaration                                                                         // no semi-colon
1031                { $$ = new IfCtl( $1, nullptr ); }
1032        | cfa_declaration                                                                       // no semi-colon
1033                { $$ = new IfCtl( $1, nullptr ); }
1034        | declaration comma_expression                                          // semi-colon separated
1035                { $$ = new IfCtl( $1, $2 ); }
1036        ;
1037
1038// CASE and DEFAULT clauses are only allowed in the SWITCH statement, precluding Duff's device. In addition, a case
1039// clause allows a list of values and subranges.
1040
1041case_value:                                                                                             // CFA
1042        constant_expression                                                     { $$ = $1; }
1043        | constant_expression ELLIPSIS constant_expression      // GCC, subrange
1044                { $$ = new ExpressionNode( new RangeExpr( maybeMoveBuild< Expression >( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
1045        | subrange                                                                                      // CFA, subrange
1046        ;
1047
1048case_value_list:                                                                                // CFA
1049        case_value                                                                      { $$ = new StatementNode( build_case( $1 ) ); }
1050                // convert case list, e.g., "case 1, 3, 5:" into "case 1: case 3: case 5"
1051        | case_value_list ',' case_value                        { $$ = (StatementNode *)($1->set_last( new StatementNode( build_case( $3 ) ) ) ); }
1052        ;
1053
1054case_label:                                                                                             // CFA
1055        CASE case_value_list ':'                                        { $$ = $2; }
1056        | DEFAULT ':'                                                           { $$ = new StatementNode( build_default() ); }
1057                // A semantic check is required to ensure only one default clause per switch/choose statement.
1058        ;
1059
1060//label_list_opt:
1061//      // empty
1062//      | identifier_or_type_name ':'
1063//      | label_list_opt identifier_or_type_name ':'
1064//      ;
1065
1066case_label_list:                                                                                // CFA
1067        case_label
1068        | case_label_list case_label                            { $$ = (StatementNode *)( $1->set_last( $2 )); }
1069        ;
1070
1071case_clause:                                                                                    // CFA
1072        case_label_list statement                                       { $$ = $1->append_last_case( new StatementNode( build_compound( $2 ) ) ); }
1073        ;
1074
1075switch_clause_list_opt:                                                                 // CFA
1076        // empty
1077                { $$ = nullptr; }
1078        | switch_clause_list
1079        ;
1080
1081switch_clause_list:                                                                             // CFA
1082        case_label_list statement_list_nodecl
1083                { $$ = $1->append_last_case( new StatementNode( build_compound( $2 ) ) ); }
1084        | switch_clause_list case_label_list statement_list_nodecl
1085                { $$ = (StatementNode *)( $1->set_last( $2->append_last_case( new StatementNode( build_compound( $3 ) ) ) ) ); }
1086        ;
1087
1088iteration_statement:
1089        WHILE '(' push if_control_expression ')' statement pop
1090                { $$ = new StatementNode( build_while( $4, $6 ) ); }
1091        | DO statement WHILE '(' comma_expression ')' ';'
1092                { $$ = new StatementNode( build_do_while( $5, $2 ) ); }
1093        | FOR '(' push for_control_expression ')' statement pop
1094                { $$ = new StatementNode( build_for( $4, $6 ) ); }
1095        ;
1096
1097for_control_expression:
1098        comma_expression_opt ';' comma_expression_opt ';' comma_expression_opt
1099                { $$ = new ForCtl( $1, $3, $5 ); }
1100        | declaration comma_expression_opt ';' comma_expression_opt // C99
1101                { $$ = new ForCtl( $1, $2, $4 ); }
1102        ;
1103
1104jump_statement:
1105        GOTO identifier_or_type_name ';'
1106                { $$ = new StatementNode( build_branch( $2, BranchStmt::Goto ) ); }
1107        | GOTO '*' comma_expression ';'                                         // GCC, computed goto
1108                // The syntax for the GCC computed goto violates normal expression precedence, e.g., goto *i+3; => goto *(i+3);
1109                // whereas normal operator precedence yields goto (*i)+3;
1110                { $$ = new StatementNode( build_computedgoto( $3 ) ); }
1111                // A semantic check is required to ensure fallthru appears only in the body of a choose statement.
1112    | fall_through_name ';'                                                             // CFA
1113                { $$ = new StatementNode( build_branch( BranchStmt::FallThrough ) ); }
1114    | fall_through_name identifier_or_type_name ';'             // CFA
1115                { $$ = new StatementNode( build_branch( $2, BranchStmt::FallThrough ) ); }
1116        | fall_through_name DEFAULT ';'                                         // CFA
1117                { $$ = new StatementNode( build_branch( BranchStmt::FallThroughDefault ) ); }
1118        | CONTINUE ';'
1119                // A semantic check is required to ensure this statement appears only in the body of an iteration statement.
1120                { $$ = new StatementNode( build_branch( BranchStmt::Continue ) ); }
1121        | CONTINUE identifier_or_type_name ';'                          // CFA, multi-level continue
1122                // A semantic check is required to ensure this statement appears only in the body of an iteration statement, and
1123                // the target of the transfer appears only at the start of an iteration statement.
1124                { $$ = new StatementNode( build_branch( $2, BranchStmt::Continue ) ); }
1125        | BREAK ';'
1126                // A semantic check is required to ensure this statement appears only in the body of an iteration statement.
1127                { $$ = new StatementNode( build_branch( BranchStmt::Break ) ); }
1128        | BREAK identifier_or_type_name ';'                                     // CFA, multi-level exit
1129                // A semantic check is required to ensure this statement appears only in the body of an iteration statement, and
1130                // the target of the transfer appears only at the start of an iteration statement.
1131                { $$ = new StatementNode( build_branch( $2, BranchStmt::Break ) ); }
1132        | RETURN comma_expression_opt ';'
1133                { $$ = new StatementNode( build_return( $2 ) ); }
1134        | RETURN '{' initializer_list_opt comma_opt '}'
1135                { SemanticError( yylloc, "Initializer return is currently unimplemented." ); $$ = nullptr; }
1136        | THROW assignment_expression_opt ';'                           // handles rethrow
1137                { $$ = new StatementNode( build_throw( $2 ) ); }
1138        | THROWRESUME assignment_expression_opt ';'                     // handles reresume
1139                { $$ = new StatementNode( build_resume( $2 ) ); }
1140        | THROWRESUME assignment_expression_opt AT assignment_expression ';' // handles reresume
1141                { $$ = new StatementNode( build_resume_at( $2, $4 ) ); }
1142        ;
1143
1144fall_through_name:                                                                              // CFA
1145        FALLTHRU
1146        | FALLTHROUGH
1147        ;
1148
1149with_statement:
1150        WITH '(' tuple_expression_list ')' statement
1151                {
1152                        $$ = new StatementNode( build_with( $3, $5 ) );
1153                }
1154        ;
1155
1156// If MUTEX becomes a general qualifier, there are shift/reduce conflicts, so change syntax to "with mutex".
1157mutex_statement:
1158        MUTEX '(' argument_expression_list ')' statement
1159                { SemanticError( yylloc, "Mutex statement is currently unimplemented." ); $$ = nullptr; }
1160        ;
1161
1162when_clause:
1163        WHEN '(' comma_expression ')'                           { $$ = $3; }
1164        ;
1165
1166when_clause_opt:
1167        // empty
1168                { $$ = nullptr; }
1169        | when_clause
1170        ;
1171
1172waitfor:
1173        WAITFOR '(' cast_expression ')'
1174                { $$ = $3; }
1175        | WAITFOR '(' cast_expression ',' argument_expression_list ')'
1176                { $$ = (ExpressionNode *)$3->set_last( $5 ); }
1177        ;
1178
1179timeout:
1180        TIMEOUT '(' comma_expression ')'                        { $$ = $3; }
1181        ;
1182
1183waitfor_clause:
1184        when_clause_opt waitfor statement                                       %prec THEN
1185                { $$ = build_waitfor( $2, $3, $1 ); }
1186        | when_clause_opt waitfor statement WOR waitfor_clause
1187                { $$ = build_waitfor( $2, $3, $1, $5 ); }
1188        | when_clause_opt timeout statement                                     %prec THEN
1189                { $$ = build_waitfor_timeout( $2, $3, $1 ); }
1190        | when_clause_opt ELSE statement
1191                { $$ = build_waitfor_timeout( nullptr, $3, $1 ); }
1192                // "else" must be conditional after timeout or timeout is never triggered (i.e., it is meaningless)
1193        | when_clause_opt timeout statement WOR ELSE statement
1194                { SemanticError( yylloc, "else clause must be conditional after timeout or timeout never triggered." ); $$ = nullptr; }
1195        | when_clause_opt timeout statement WOR when_clause ELSE statement
1196                { $$ = build_waitfor_timeout( $2, $3, $1, $7, $5 ); }
1197        ;
1198
1199waitfor_statement:
1200        when_clause_opt waitfor statement                                       %prec THEN
1201                { $$ = new StatementNode( build_waitfor( $2, $3, $1 ) ); }
1202        | when_clause_opt waitfor statement WOR waitfor_clause
1203                { $$ = new StatementNode( build_waitfor( $2, $3, $1, $5 ) ); }
1204        ;
1205
1206exception_statement:
1207        TRY compound_statement handler_clause
1208                { $$ = new StatementNode( build_try( $2, $3, 0 ) ); }
1209        | TRY compound_statement finally_clause
1210                { $$ = new StatementNode( build_try( $2, 0, $3 ) ); }
1211        | TRY compound_statement handler_clause finally_clause
1212                { $$ = new StatementNode( build_try( $2, $3, $4 ) ); }
1213        ;
1214
1215handler_clause:
1216        handler_key '(' push exception_declaration pop handler_predicate_opt ')' compound_statement pop
1217                { $$ = new StatementNode( build_catch( $1, $4, $6, $8 ) ); }
1218        | handler_clause handler_key '(' push exception_declaration pop handler_predicate_opt ')' compound_statement pop
1219                { $$ = (StatementNode *)$1->set_last( new StatementNode( build_catch( $2, $5, $7, $9 ) ) ); }
1220        ;
1221
1222handler_predicate_opt:
1223        // empty
1224                { $$ = nullptr; }
1225        | ';' conditional_expression                            { $$ = $2; }
1226        ;
1227
1228handler_key:
1229        CATCH                                                                           { $$ = CatchStmt::Terminate; }
1230        | CATCHRESUME                                                           { $$ = CatchStmt::Resume; }
1231        ;
1232
1233finally_clause:
1234        FINALLY compound_statement                                      { $$ = new StatementNode( build_finally( $2 ) ); }
1235        ;
1236
1237exception_declaration:
1238                // No SUE declaration in parameter list.
1239        type_specifier_nobody
1240        | type_specifier_nobody declarator
1241                { $$ = $2->addType( $1 ); }
1242        | type_specifier_nobody variable_abstract_declarator
1243                { $$ = $2->addType( $1 ); }
1244        | cfa_abstract_declarator_tuple no_attr_identifier      // CFA
1245                { $$ = $1->addName( $2 ); }
1246        | cfa_abstract_declarator_tuple                                         // CFA
1247        ;
1248
1249enable_disable_statement:
1250        enable_disable_key identifier_list compound_statement
1251        ;
1252
1253enable_disable_key:
1254        ENABLE
1255        | DISABLE
1256        ;
1257
1258asm_statement:
1259        ASM asm_volatile_opt '(' string_literal ')' ';'
1260                { $$ = new StatementNode( build_asm( $2, $4, 0 ) ); }
1261        | ASM asm_volatile_opt '(' string_literal ':' asm_operands_opt ')' ';' // remaining GCC
1262                { $$ = new StatementNode( build_asm( $2, $4, $6 ) ); }
1263        | ASM asm_volatile_opt '(' string_literal ':' asm_operands_opt ':' asm_operands_opt ')' ';'
1264                { $$ = new StatementNode( build_asm( $2, $4, $6, $8 ) ); }
1265        | ASM asm_volatile_opt '(' string_literal ':' asm_operands_opt ':' asm_operands_opt ':' asm_clobbers_list_opt ')' ';'
1266                { $$ = new StatementNode( build_asm( $2, $4, $6, $8, $10 ) ); }
1267        | ASM asm_volatile_opt GOTO '(' string_literal ':' ':' asm_operands_opt ':' asm_clobbers_list_opt ':' label_list ')' ';'
1268                { $$ = new StatementNode( build_asm( $2, $5, 0, $8, $10, $12 ) ); }
1269        ;
1270
1271asm_volatile_opt:                                                                               // GCC
1272        // empty
1273                { $$ = false; }
1274        | VOLATILE
1275                { $$ = true; }
1276        ;
1277
1278asm_operands_opt:                                                                               // GCC
1279        // empty
1280                { $$ = nullptr; }                                                               // use default argument
1281        | asm_operands_list
1282        ;
1283
1284asm_operands_list:                                                                              // GCC
1285        asm_operand
1286        | asm_operands_list ',' asm_operand
1287                { $$ = (ExpressionNode *)$1->set_last( $3 ); }
1288        ;
1289
1290asm_operand:                                                                                    // GCC
1291        string_literal '(' constant_expression ')'
1292                { $$ = new ExpressionNode( new AsmExpr( maybeMoveBuild< Expression >( (ExpressionNode *)nullptr ), $1, maybeMoveBuild< Expression >( $3 ) ) ); }
1293        | '[' constant_expression ']' string_literal '(' constant_expression ')'
1294                { $$ = new ExpressionNode( new AsmExpr( maybeMoveBuild< Expression >( $2 ), $4, maybeMoveBuild< Expression >( $6 ) ) ); }
1295        ;
1296
1297asm_clobbers_list_opt:                                                                  // GCC
1298        // empty
1299                { $$ = nullptr; }                                                               // use default argument
1300        | string_literal
1301                { $$ = new ExpressionNode( $1 ); }
1302        | asm_clobbers_list_opt ',' string_literal
1303                // set_last returns ParseNode *
1304                { $$ = (ExpressionNode *)$1->set_last( new ExpressionNode( $3 ) ); }
1305        ;
1306
1307label_list:
1308        no_attr_identifier
1309                {
1310                        $$ = new LabelNode(); $$->labels.push_back( *$1 );
1311                        delete $1;                                                                      // allocated by lexer
1312                }
1313        | label_list ',' no_attr_identifier
1314                {
1315                        $$ = $1; $1->labels.push_back( *$3 );
1316                        delete $3;                                                                      // allocated by lexer
1317                }
1318        ;
1319
1320//******************************* DECLARATIONS *********************************
1321
1322declaration_list_opt:                                                                   // used at beginning of switch statement
1323        // empty
1324                { $$ = nullptr; }
1325        | declaration_list
1326        ;
1327
1328declaration_list:
1329        declaration
1330        | declaration_list declaration
1331                { $$ = $1->appendList( $2 ); }
1332        ;
1333
1334KR_parameter_list_opt:                                                                  // used to declare parameter types in K&R style functions
1335        // empty
1336                { $$ = nullptr; }
1337        | KR_parameter_list
1338        ;
1339
1340KR_parameter_list:
1341        push c_declaration pop ';'
1342                { $$ = $2; }
1343        | KR_parameter_list push c_declaration pop ';'
1344                { $$ = $1->appendList( $3 ); }
1345        ;
1346
1347local_label_declaration_opt:                                                    // GCC, local label
1348        // empty
1349        | local_label_declaration_list
1350        ;
1351
1352local_label_declaration_list:                                                   // GCC, local label
1353        LABEL local_label_list ';'
1354        | local_label_declaration_list LABEL local_label_list ';'
1355        ;
1356
1357local_label_list:                                                                               // GCC, local label
1358        no_attr_identifier_or_type_name
1359        | local_label_list ',' no_attr_identifier_or_type_name
1360        ;
1361
1362declaration:                                                                                    // old & new style declarations
1363        c_declaration ';'
1364        | cfa_declaration ';'                                                           // CFA
1365        | static_assert                                                                         // C11
1366        ;
1367
1368static_assert:
1369        STATICASSERT '(' constant_expression ',' string_literal ')' ';' // C11
1370                { $$ = DeclarationNode::newStaticAssert( $3, $5 ); }
1371        | STATICASSERT '(' constant_expression ')' ';'          // CFA
1372                { $$ = DeclarationNode::newStaticAssert( $3, build_constantStr( *new string( "\"\"" ) ) ); }
1373
1374// C declaration syntax is notoriously confusing and error prone. Cforall provides its own type, variable and function
1375// declarations. CFA declarations use the same declaration tokens as in C; however, CFA places declaration modifiers to
1376// the left of the base type, while C declarations place modifiers to the right of the base type. CFA declaration
1377// modifiers are interpreted from left to right and the entire type specification is distributed across all variables in
1378// the declaration list (as in Pascal).  ANSI C and the new CFA declarations may appear together in the same program
1379// block, but cannot be mixed within a specific declaration.
1380//
1381//                      CFA                                     C
1382//              [10] int x;                     int x[10];              // array of 10 integers
1383//              [10] * char y;          char *y[10];    // array of 10 pointers to char
1384
1385cfa_declaration:                                                                                // CFA
1386        cfa_variable_declaration
1387        | cfa_typedef_declaration
1388        | cfa_function_declaration
1389        | type_declaring_list
1390        | trait_specifier
1391        ;
1392
1393cfa_variable_declaration:                                                               // CFA
1394        cfa_variable_specifier initializer_opt
1395                { $$ = $1->addInitializer( $2 ); }
1396        | declaration_qualifier_list cfa_variable_specifier initializer_opt
1397                // declaration_qualifier_list also includes type_qualifier_list, so a semantic check is necessary to preclude
1398                // them as a type_qualifier cannot appear in that context.
1399                { $$ = $2->addQualifiers( $1 )->addInitializer( $3 ); }
1400        | cfa_variable_declaration pop ',' push identifier_or_type_name initializer_opt
1401                { $$ = $1->appendList( $1->cloneType( $5 )->addInitializer( $6 ) ); }
1402        ;
1403
1404cfa_variable_specifier:                                                                 // CFA
1405                // A semantic check is required to ensure asm_name only appears on declarations with implicit or explicit static
1406                // storage-class
1407        cfa_abstract_declarator_no_tuple identifier_or_type_name asm_name_opt
1408                { $$ = $1->addName( $2 )->addAsmName( $3 ); }
1409        | cfa_abstract_tuple identifier_or_type_name asm_name_opt
1410                { $$ = $1->addName( $2 )->addAsmName( $3 ); }
1411        | type_qualifier_list cfa_abstract_tuple identifier_or_type_name asm_name_opt
1412                { $$ = $2->addQualifiers( $1 )->addName( $3 )->addAsmName( $4 ); }
1413        ;
1414
1415cfa_function_declaration:                                                               // CFA
1416        cfa_function_specifier
1417        | type_qualifier_list cfa_function_specifier
1418                { $$ = $2->addQualifiers( $1 ); }
1419        | declaration_qualifier_list cfa_function_specifier
1420                { $$ = $2->addQualifiers( $1 ); }
1421        | declaration_qualifier_list type_qualifier_list cfa_function_specifier
1422                { $$ = $3->addQualifiers( $1 )->addQualifiers( $2 ); }
1423        | cfa_function_declaration ',' identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')'
1424                {
1425                        // Append the return type at the start (left-hand-side) to each identifier in the list.
1426                        DeclarationNode * ret = new DeclarationNode;
1427                        ret->type = maybeClone( $1->type->base );
1428                        $$ = $1->appendList( DeclarationNode::newFunction( $3, ret, $6, nullptr ) );
1429                }
1430        ;
1431
1432cfa_function_specifier:                                                                 // CFA
1433//      '[' ']' identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')' // S/R conflict
1434//              {
1435//                      $$ = DeclarationNode::newFunction( $3, DeclarationNode::newTuple( 0 ), $6, 0, true );
1436//              }
1437//      '[' ']' identifier '(' push cfa_parameter_ellipsis_list_opt pop ')'
1438//              {
1439//                      typedefTable.setNextIdentifier( *$5 );
1440//                      $$ = DeclarationNode::newFunction( $5, DeclarationNode::newTuple( 0 ), $8, 0, true );
1441//              }
1442//      | '[' ']' TYPEDEFname '(' push cfa_parameter_ellipsis_list_opt pop ')'
1443//              {
1444//                      typedefTable.setNextIdentifier( *$5 );
1445//                      $$ = DeclarationNode::newFunction( $5, DeclarationNode::newTuple( 0 ), $8, 0, true );
1446//              }
1447//      | '[' ']' typegen_name
1448                // identifier_or_type_name must be broken apart because of the sequence:
1449                //
1450                //   '[' ']' identifier_or_type_name '(' cfa_parameter_ellipsis_list_opt ')'
1451                //   '[' ']' type_specifier
1452                //
1453                // type_specifier can resolve to just TYPEDEFname (e.g., typedef int T; int f( T );). Therefore this must be
1454                // flattened to allow lookahead to the '(' without having to reduce identifier_or_type_name.
1455        cfa_abstract_tuple identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')'
1456                // To obtain LR(1 ), this rule must be factored out from function return type (see cfa_abstract_declarator).
1457                { $$ = DeclarationNode::newFunction( $2, $1, $5, 0 ); }
1458        | cfa_function_return identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')'
1459                { $$ = DeclarationNode::newFunction( $2, $1, $5, 0 ); }
1460        ;
1461
1462cfa_function_return:                                                                    // CFA
1463        '[' push cfa_parameter_list pop ']'
1464                { $$ = DeclarationNode::newTuple( $3 ); }
1465        | '[' push cfa_parameter_list pop ',' push cfa_abstract_parameter_list pop ']'
1466                // To obtain LR(1 ), the last cfa_abstract_parameter_list is added into this flattened rule to lookahead to the ']'.
1467                { $$ = DeclarationNode::newTuple( $3->appendList( $7 ) ); }
1468        ;
1469
1470cfa_typedef_declaration:                                                                // CFA
1471        TYPEDEF cfa_variable_specifier
1472                {
1473                        typedefTable.addToEnclosingScope( *$2->name, TYPEDEFname, "1" );
1474                        $$ = $2->addTypedef();
1475                }
1476        | TYPEDEF cfa_function_specifier
1477                {
1478                        typedefTable.addToEnclosingScope( *$2->name, TYPEDEFname, "2" );
1479                        $$ = $2->addTypedef();
1480                }
1481        | cfa_typedef_declaration pop ',' push no_attr_identifier
1482                {
1483                        typedefTable.addToEnclosingScope( *$5, TYPEDEFname, "3" );
1484                        $$ = $1->appendList( $1->cloneType( $5 ) );
1485                }
1486        ;
1487
1488// Traditionally typedef is part of storage-class specifier for syntactic convenience only. Here, it is factored out as
1489// a separate form of declaration, which syntactically precludes storage-class specifiers and initialization.
1490
1491typedef_declaration:
1492        TYPEDEF type_specifier declarator
1493                {
1494                        typedefTable.addToEnclosingScope( *$3->name, TYPEDEFname, "4" );
1495                        $$ = $3->addType( $2 )->addTypedef();
1496                }
1497        | typedef_declaration pop ',' push declarator
1498                {
1499                        typedefTable.addToEnclosingScope( *$5->name, TYPEDEFname, "5" );
1500                        $$ = $1->appendList( $1->cloneBaseType( $5 )->addTypedef() );
1501                }
1502        | type_qualifier_list TYPEDEF type_specifier declarator // remaining OBSOLESCENT (see 2 )
1503                {
1504                        typedefTable.addToEnclosingScope( *$4->name, TYPEDEFname, "6" );
1505                        $$ = $4->addType( $3 )->addQualifiers( $1 )->addTypedef();
1506                }
1507        | type_specifier TYPEDEF declarator
1508                {
1509                        typedefTable.addToEnclosingScope( *$3->name, TYPEDEFname, "7" );
1510                        $$ = $3->addType( $1 )->addTypedef();
1511                }
1512        | type_specifier TYPEDEF type_qualifier_list declarator
1513                {
1514                        typedefTable.addToEnclosingScope( *$4->name, TYPEDEFname, "8" );
1515                        $$ = $4->addQualifiers( $1 )->addTypedef()->addType( $1 );
1516                }
1517        ;
1518
1519typedef_expression:
1520                // GCC, naming expression type: typedef name = exp; gives a name to the type of an expression
1521        TYPEDEF no_attr_identifier '=' assignment_expression
1522                {
1523                        // $$ = DeclarationNode::newName( 0 );                  // unimplemented
1524                        SemanticError( yylloc, "Typedef expression is currently unimplemented." ); $$ = nullptr;
1525                }
1526        | typedef_expression pop ',' push no_attr_identifier '=' assignment_expression
1527                {
1528                        // $$ = DeclarationNode::newName( 0 );                  // unimplemented
1529                        SemanticError( yylloc, "Typedef expression is currently unimplemented." ); $$ = nullptr;
1530                }
1531        ;
1532
1533//c_declaration:
1534//      declaring_list pop ';'
1535//      | typedef_declaration pop ';'
1536//      | typedef_expression pop ';'                                            // GCC, naming expression type
1537//      | sue_declaration_specifier pop ';'
1538//      ;
1539//
1540//declaring_list:
1541//              // A semantic check is required to ensure asm_name only appears on declarations with implicit or explicit static
1542//              // storage-class
1543//       declarator asm_name_opt initializer_opt
1544//              {
1545//                      typedefTable.addToEnclosingScope( IDENTIFIER );
1546//                      $$ = ( $2->addType( $1 ))->addAsmName( $3 )->addInitializer( $4 );
1547//              }
1548//      | declaring_list ',' attribute_list_opt declarator asm_name_opt initializer_opt
1549//              {
1550//                      typedefTable.addToEnclosingScope( IDENTIFIER );
1551//                      $$ = $1->appendList( $1->cloneBaseType( $4->addAsmName( $5 )->addInitializer( $6 ) ) );
1552//              }
1553//      ;
1554
1555c_declaration:
1556        declaration_specifier declaring_list
1557                { $$ = distAttr( $1, $2 ); }
1558        | typedef_declaration
1559        | typedef_expression                                                            // GCC, naming expression type
1560        | sue_declaration_specifier
1561        ;
1562
1563declaring_list:
1564                // A semantic check is required to ensure asm_name only appears on declarations with implicit or explicit static
1565                // storage-class
1566        declarator asm_name_opt initializer_opt
1567                { $$ = $1->addAsmName( $2 )->addInitializer( $3 ); }
1568        | declaring_list ',' attribute_list_opt declarator asm_name_opt initializer_opt
1569                { $$ = $1->appendList( $4->addQualifiers( $3 )->addAsmName( $5 )->addInitializer( $6 ) ); }
1570        ;
1571
1572declaration_specifier:                                                                  // type specifier + storage class
1573        basic_declaration_specifier
1574        | sue_declaration_specifier
1575        | type_declaration_specifier
1576        ;
1577
1578declaration_specifier_nobody:                                                   // type specifier + storage class - {...}
1579                // Preclude SUE declarations in restricted scopes:
1580                //
1581                //    int f( struct S { int i; } s1, Struct S s2 ) { struct S s3; ... }
1582                //
1583                // because it is impossible to call f due to name equivalence.
1584        basic_declaration_specifier
1585        | sue_declaration_specifier_nobody
1586        | type_declaration_specifier
1587        ;
1588
1589type_specifier:                                                                                 // type specifier
1590        basic_type_specifier
1591        | sue_type_specifier
1592        | type_type_specifier
1593        ;
1594
1595type_specifier_nobody:                                                                  // type specifier - {...}
1596                // Preclude SUE declarations in restricted scopes:
1597                //
1598                //    int f( struct S { int i; } s1, Struct S s2 ) { struct S s3; ... }
1599                //
1600                // because it is impossible to call f due to name equivalence.
1601        basic_type_specifier
1602        | sue_type_specifier_nobody
1603        | type_type_specifier
1604        ;
1605
1606type_qualifier_list_opt:                                                                // GCC, used in asm_statement
1607        // empty
1608                { $$ = nullptr; }
1609        | type_qualifier_list
1610        ;
1611
1612type_qualifier_list:
1613                // A semantic check is necessary to ensure a type qualifier is appropriate for the kind of declaration.
1614                //
1615                // ISO/IEC 9899:1999 Section 6.7.3(4 ) : If the same qualifier appears more than once in the same
1616                // specifier-qualifier-list, either directly or via one or more typedefs, the behavior is the same as if it
1617                // appeared only once.
1618        type_qualifier
1619        | type_qualifier_list type_qualifier
1620                { $$ = $1->addQualifiers( $2 ); }
1621        ;
1622
1623type_qualifier:
1624        type_qualifier_name
1625        | attribute
1626        ;
1627
1628type_qualifier_name:
1629        CONST
1630                { $$ = DeclarationNode::newTypeQualifier( Type::Const ); }
1631        | RESTRICT
1632                { $$ = DeclarationNode::newTypeQualifier( Type::Restrict ); }
1633        | VOLATILE
1634                { $$ = DeclarationNode::newTypeQualifier( Type::Volatile ); }
1635        | ATOMIC
1636                { $$ = DeclarationNode::newTypeQualifier( Type::Atomic ); }
1637        | forall
1638        ;
1639
1640forall:
1641        FORALL '(' type_parameter_list ')'                                      // CFA
1642                { $$ = DeclarationNode::newForall( $3 ); }
1643        ;
1644
1645declaration_qualifier_list:
1646        storage_class_list
1647        | type_qualifier_list storage_class_list                        // remaining OBSOLESCENT (see 2 )
1648                { $$ = $1->addQualifiers( $2 ); }
1649        | declaration_qualifier_list type_qualifier_list storage_class_list
1650                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
1651        ;
1652
1653storage_class_list:
1654                // A semantic check is necessary to ensure a storage class is appropriate for the kind of declaration and that
1655                // only one of each is specified, except for inline, which can appear with the others.
1656                //
1657                // ISO/IEC 9899:1999 Section 6.7.1(2) : At most, one storage-class specifier may be given in the declaration
1658                // specifiers in a declaration.
1659        storage_class
1660        | storage_class_list storage_class
1661                { $$ = $1->addQualifiers( $2 ); }
1662        ;
1663
1664storage_class:
1665        EXTERN
1666                { $$ = DeclarationNode::newStorageClass( Type::Extern ); }
1667        | STATIC
1668                { $$ = DeclarationNode::newStorageClass( Type::Static ); }
1669        | AUTO
1670                { $$ = DeclarationNode::newStorageClass( Type::Auto ); }
1671        | REGISTER
1672                { $$ = DeclarationNode::newStorageClass( Type::Register ); }
1673        | THREADLOCAL                                                                           // C11
1674                { $$ = DeclarationNode::newStorageClass( Type::Threadlocal ); }
1675                // Put function specifiers here to simplify parsing rules, but separate them semantically.
1676        | INLINE                                                                                        // C99
1677                { $$ = DeclarationNode::newFuncSpecifier( Type::Inline ); }
1678        | FORTRAN                                                                                       // C99
1679                { $$ = DeclarationNode::newFuncSpecifier( Type::Fortran ); }
1680        | NORETURN                                                                                      // C11
1681                { $$ = DeclarationNode::newFuncSpecifier( Type::Noreturn ); }
1682        ;
1683
1684basic_type_name:
1685        VOID
1686                { $$ = DeclarationNode::newBasicType( DeclarationNode::Void ); }
1687        | BOOL                                                                                          // C99
1688                { $$ = DeclarationNode::newBasicType( DeclarationNode::Bool ); }
1689        | CHAR
1690                { $$ = DeclarationNode::newBasicType( DeclarationNode::Char ); }
1691        | INT
1692                { $$ = DeclarationNode::newBasicType( DeclarationNode::Int ); }
1693        | INT128
1694                { $$ = DeclarationNode::newBasicType( DeclarationNode::Int128 ); }
1695        | FLOAT
1696                { $$ = DeclarationNode::newBasicType( DeclarationNode::Float ); }
1697        | FLOAT80
1698                { $$ = DeclarationNode::newBasicType( DeclarationNode::Float80 ); }
1699        | FLOAT128
1700                { $$ = DeclarationNode::newBasicType( DeclarationNode::Float128 ); }
1701        | DOUBLE
1702                { $$ = DeclarationNode::newBasicType( DeclarationNode::Double ); }
1703        | COMPLEX                                                                                       // C99
1704                { $$ = DeclarationNode::newComplexType( DeclarationNode::Complex ); }
1705        | IMAGINARY                                                                                     // C99
1706                { $$ = DeclarationNode::newComplexType( DeclarationNode::Imaginary ); }
1707        | SIGNED
1708                { $$ = DeclarationNode::newSignedNess( DeclarationNode::Signed ); }
1709        | UNSIGNED
1710                { $$ = DeclarationNode::newSignedNess( DeclarationNode::Unsigned ); }
1711        | SHORT
1712                { $$ = DeclarationNode::newLength( DeclarationNode::Short ); }
1713        | LONG
1714                { $$ = DeclarationNode::newLength( DeclarationNode::Long ); }
1715        | VALIST                                                                                        // GCC, __builtin_va_list
1716                { $$ = DeclarationNode::newBuiltinType( DeclarationNode::Valist ); }
1717        ;
1718
1719basic_declaration_specifier:
1720                // A semantic check is necessary for conflicting storage classes.
1721        basic_type_specifier
1722        | declaration_qualifier_list basic_type_specifier
1723                { $$ = $2->addQualifiers( $1 ); }
1724        | basic_declaration_specifier storage_class                     // remaining OBSOLESCENT (see 2)
1725                { $$ = $1->addQualifiers( $2 ); }
1726        | basic_declaration_specifier storage_class type_qualifier_list
1727                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
1728        | basic_declaration_specifier storage_class basic_type_specifier
1729                { $$ = $3->addQualifiers( $2 )->addType( $1 ); }
1730        ;
1731
1732basic_type_specifier:
1733        direct_type
1734                // Cannot have type modifiers, e.g., short, long, etc.
1735        | type_qualifier_list_opt indirect_type type_qualifier_list_opt
1736                { $$ = $2->addQualifiers( $1 )->addQualifiers( $3 ); }
1737        ;
1738
1739direct_type:
1740        basic_type_name
1741        | type_qualifier_list basic_type_name
1742                { $$ = $2->addQualifiers( $1 ); }
1743        | direct_type type_qualifier
1744                { $$ = $1->addQualifiers( $2 ); }
1745        | direct_type basic_type_name
1746                { $$ = $1->addType( $2 ); }
1747        ;
1748
1749indirect_type:
1750        TYPEOF '(' type ')'                                                                     // GCC: typeof(x) y;
1751                { $$ = $3; }
1752        | TYPEOF '(' comma_expression ')'                                       // GCC: typeof(a+b) y;
1753                { $$ = DeclarationNode::newTypeof( $3 ); }
1754        | ATTR_TYPEGENname '(' type ')'                                         // CFA: e.g., @type(x) y;
1755                { $$ = DeclarationNode::newAttr( $1, $3 ); }
1756        | ATTR_TYPEGENname '(' comma_expression ')'                     // CFA: e.g., @type(a+b) y;
1757                { $$ = DeclarationNode::newAttr( $1, $3 ); }
1758        | ZERO_T                                                                                        // CFA
1759                { $$ = DeclarationNode::newBuiltinType( DeclarationNode::Zero ); }
1760        | ONE_T                                                                                         // CFA
1761                { $$ = DeclarationNode::newBuiltinType( DeclarationNode::One ); }
1762        ;
1763
1764sue_declaration_specifier:                                                              // struct, union, enum + storage class + type specifier
1765        sue_type_specifier
1766        | declaration_qualifier_list sue_type_specifier
1767                { $$ = $2->addQualifiers( $1 ); }
1768        | sue_declaration_specifier storage_class                       // remaining OBSOLESCENT (see 2)
1769                { $$ = $1->addQualifiers( $2 ); }
1770        | sue_declaration_specifier storage_class type_qualifier_list
1771                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
1772        ;
1773
1774sue_type_specifier:                                                                             // struct, union, enum + type specifier
1775        elaborated_type
1776        | type_qualifier_list
1777                { if ( $1->type != nullptr && $1->type->forall ) forall = true; } // remember generic type
1778          elaborated_type
1779                { $$ = $3->addQualifiers( $1 ); }
1780        | sue_type_specifier type_qualifier
1781                {
1782                        if ( $2->type != nullptr && $2->type->forall ) forall = true; // remember generic type
1783                        $$ = $1->addQualifiers( $2 );
1784                }
1785        ;
1786
1787sue_declaration_specifier_nobody:                                               // struct, union, enum - {...} + storage class + type specifier
1788        sue_type_specifier_nobody
1789        | declaration_qualifier_list sue_type_specifier_nobody
1790                { $$ = $2->addQualifiers( $1 ); }
1791        | sue_declaration_specifier_nobody storage_class        // remaining OBSOLESCENT (see 2)
1792                { $$ = $1->addQualifiers( $2 ); }
1793        | sue_declaration_specifier_nobody storage_class type_qualifier_list
1794                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
1795        ;
1796
1797sue_type_specifier_nobody:                                                              // struct, union, enum - {...} + type specifier
1798        elaborated_type_nobody
1799        | type_qualifier_list elaborated_type_nobody
1800                { $$ = $2->addQualifiers( $1 ); }
1801        | sue_type_specifier_nobody type_qualifier
1802                { $$ = $1->addQualifiers( $2 ); }
1803        ;
1804
1805type_declaration_specifier:
1806        type_type_specifier
1807        | declaration_qualifier_list type_type_specifier
1808                { $$ = $2->addQualifiers( $1 ); }
1809        | type_declaration_specifier storage_class                      // remaining OBSOLESCENT (see 2)
1810                { $$ = $1->addQualifiers( $2 ); }
1811        | type_declaration_specifier storage_class type_qualifier_list
1812                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
1813        ;
1814
1815type_type_specifier:                                                                    // typedef types
1816        type_name
1817        | type_qualifier_list type_name
1818                { $$ = $2->addQualifiers( $1 ); }
1819        | type_type_specifier type_qualifier
1820                { $$ = $1->addQualifiers( $2 ); }
1821        ;
1822
1823type_name:
1824        TYPEDEFname
1825                { $$ = DeclarationNode::newFromTypedef( $1 ); }
1826        | '.' TYPEDEFname
1827                { $$ = DeclarationNode::newQualifiedType( DeclarationNode::newFromGlobalScope(), DeclarationNode::newFromTypedef( $2 ) ); }
1828        | type_name '.' TYPEDEFname
1829                { $$ = DeclarationNode::newQualifiedType( $1, DeclarationNode::newFromTypedef( $3 ) ); }
1830        | typegen_name
1831        | '.' typegen_name
1832                { $$ = DeclarationNode::newQualifiedType( DeclarationNode::newFromGlobalScope(), $2 ); }
1833        | type_name '.' typegen_name
1834                { $$ = DeclarationNode::newQualifiedType( $1, $3 ); }
1835        ;
1836
1837typegen_name:                                                                                   // CFA
1838        TYPEGENname
1839                { $$ = DeclarationNode::newFromTypeGen( $1, nullptr ); }
1840        | TYPEGENname '(' ')'
1841                { $$ = DeclarationNode::newFromTypeGen( $1, nullptr ); }
1842        | TYPEGENname '(' type_list ')'
1843                { $$ = DeclarationNode::newFromTypeGen( $1, $3 ); }
1844        ;
1845
1846elaborated_type:                                                                                // struct, union, enum
1847        aggregate_type
1848        | enum_type
1849        ;
1850
1851elaborated_type_nobody:                                                                 // struct, union, enum - {...}
1852        aggregate_type_nobody
1853        | enum_type_nobody
1854        ;
1855
1856fred:
1857        // empty
1858                { yyy = false; }
1859        ;
1860
1861aggregate_type:                                                                                 // struct, union
1862        aggregate_key attribute_list_opt
1863                { forall = false; }                                                             // reset
1864          '{' field_declaration_list_opt '}' type_parameters_opt
1865                { $$ = DeclarationNode::newAggregate( $1, nullptr, $7, $5, true )->addQualifiers( $2 ); }
1866        | aggregate_key attribute_list_opt no_attr_identifier fred
1867                {
1868                        typedefTable.makeTypedef( *$3, forall || typedefTable.getEnclForall() ? TYPEGENname : TYPEDEFname ); // create typedef
1869                        forall = false;                                                         // reset
1870                }
1871          '{' field_declaration_list_opt '}' type_parameters_opt
1872                { $$ = DeclarationNode::newAggregate( $1, $3, $9, $7, true )->addQualifiers( $2 ); }
1873        | aggregate_key attribute_list_opt type_name fred
1874                {
1875                        // for type_name can be a qualified type name S.T, in which case only the last name in the chain needs a typedef (other names in the chain should already have one)
1876                        typedefTable.makeTypedef( *$3->type->leafName(), forall || typedefTable.getEnclForall() ? TYPEGENname : TYPEDEFname ); // create typedef
1877                        forall = false;                                                         // reset
1878                }
1879          '{' field_declaration_list_opt '}' type_parameters_opt
1880                { $$ = DeclarationNode::newAggregate( $1, $3->type->symbolic.name, $9, $7, true )->addQualifiers( $2 ); }
1881        | aggregate_type_nobody
1882        ;
1883
1884type_parameters_opt:
1885        // empty
1886                { $$ = nullptr; }                                                               %prec '}'
1887        | '(' type_list ')'
1888                { $$ = $2; }
1889        ;
1890
1891aggregate_type_nobody:                                                                  // struct, union - {...}
1892        aggregate_key attribute_list_opt no_attr_identifier fred
1893                {
1894                        typedefTable.makeTypedef( *$3, forall || typedefTable.getEnclForall() ? TYPEGENname : TYPEDEFname );
1895                        forall = false;                                                         // reset
1896                        $$ = DeclarationNode::newAggregate( $1, $3, nullptr, nullptr, false )->addQualifiers( $2 );
1897                }
1898        | aggregate_key attribute_list_opt type_name fred
1899                {
1900                        forall = false;                                                         // reset
1901                        // Create new generic declaration with same name as previous forward declaration, where the IDENTIFIER is
1902                        // switched to a TYPEGENname. Link any generic arguments from typegen_name to new generic declaration and
1903                        // delete newFromTypeGen.
1904                        $$ = DeclarationNode::newAggregate( $1, $3->type->symbolic.name, $3->type->symbolic.actuals, nullptr, false )->addQualifiers( $2 );
1905                        $3->type->symbolic.name = nullptr;
1906                        $3->type->symbolic.actuals = nullptr;
1907                        delete $3;
1908                }
1909        ;
1910
1911aggregate_key:
1912        STRUCT
1913                { yyy = true; $$ = DeclarationNode::Struct; }
1914        | UNION
1915                { yyy = true; $$ = DeclarationNode::Union; }
1916        | EXCEPTION
1917                { yyy = true; $$ = DeclarationNode::Exception; }
1918        | COROUTINE
1919                { yyy = true; $$ = DeclarationNode::Coroutine; }
1920        | MONITOR
1921                { yyy = true; $$ = DeclarationNode::Monitor; }
1922        | THREAD
1923                { yyy = true; $$ = DeclarationNode::Thread; }
1924        ;
1925
1926field_declaration_list_opt:
1927        // empty
1928                { $$ = nullptr; }
1929        | field_declaration_list_opt field_declaration
1930                { $$ = $1 ? $1->appendList( $2 ) : $2; }
1931        ;
1932
1933field_declaration:
1934        type_specifier field_declaring_list ';'
1935                { $$ = distAttr( $1, $2 ); }
1936        | EXTENSION type_specifier field_declaring_list ';'     // GCC
1937                { distExt( $3 ); $$ = distAttr( $2, $3 ); }             // mark all fields in list
1938        | INLINE type_specifier field_declaring_list ';'        // CFA
1939                {
1940                        if ( $2->type && ( $2->type->kind == TypeData::Aggregate || $2->type->kind == TypeData::AggregateInst ) ) {
1941                                if ( $2->type->kind == TypeData::Aggregate ) {
1942                                        $2->type->aggregate.inLine = true;
1943                                } else {
1944                                        $2->type->aggInst.inLine = true;
1945                                } // if
1946                                $$ = distAttr( $2, $3 );
1947                        } else {
1948                                SemanticError( yylloc, "inline qualifier only allowed for aggregate field declarations." ); $$ = nullptr;
1949                        } // if
1950                }
1951        | typedef_declaration ';'                                                       // CFA
1952        | cfa_field_declaring_list ';'                                          // CFA, new style field declaration
1953        | EXTENSION cfa_field_declaring_list ';'                        // GCC
1954                { distExt( $2 ); $$ = $2; }                                             // mark all fields in list
1955        | cfa_typedef_declaration ';'                                           // CFA
1956        | static_assert                                                                         // C11
1957        ;
1958
1959cfa_field_declaring_list:                                                               // CFA, new style field declaration
1960        cfa_abstract_declarator_tuple                                           // CFA, no field name
1961        | cfa_abstract_declarator_tuple no_attr_identifier_or_type_name
1962                { $$ = $1->addName( $2 ); }
1963        | cfa_field_declaring_list ',' no_attr_identifier_or_type_name
1964                { $$ = $1->appendList( $1->cloneType( $3 ) ); }
1965        | cfa_field_declaring_list ','                                          // CFA, no field name
1966                { $$ = $1->appendList( $1->cloneType( 0 ) ); }
1967        ;
1968
1969field_declaring_list:
1970        field_declarator_opt
1971        | field_declaring_list ',' attribute_list_opt field_declarator_opt
1972                { $$ = $1->appendList( $4->addQualifiers( $3 ) ); }
1973        ;
1974
1975field_declarator_opt:
1976        // empty
1977                { $$ = DeclarationNode::newName( 0 ); /* XXX */ } // CFA, no field name
1978        // '@'
1979        //      { $$ = DeclarationNode::newName( new string( DeclarationNode::anonymous.newName() ) ); } // CFA, no field name
1980        | bit_subrange_size                                                                     // no field name
1981                { $$ = DeclarationNode::newBitfield( $1 ); }
1982        | variable_declarator bit_subrange_size_opt
1983                // A semantic check is required to ensure bit_subrange only appears on base type int.
1984                { $$ = $1->addBitfield( $2 ); }
1985        | variable_type_redeclarator bit_subrange_size_opt
1986                // A semantic check is required to ensure bit_subrange only appears on base type int.
1987                { $$ = $1->addBitfield( $2 ); }
1988        | variable_abstract_declarator                                          // CFA, no field name
1989        ;
1990
1991bit_subrange_size_opt:
1992        // empty
1993                { $$ = nullptr; }
1994        | bit_subrange_size
1995        ;
1996
1997bit_subrange_size:
1998        ':' constant_expression
1999                { $$ = $2; }
2000        ;
2001
2002enum_type:                                                                                              // enum
2003        ENUM attribute_list_opt '{' enumerator_list comma_opt '}'
2004                { $$ = DeclarationNode::newEnum( nullptr, $4, true )->addQualifiers( $2 ); }
2005        | ENUM attribute_list_opt no_attr_identifier
2006                { typedefTable.makeTypedef( *$3 ); }
2007          '{' enumerator_list comma_opt '}'
2008                { $$ = DeclarationNode::newEnum( $3, $6, true )->addQualifiers( $2 ); }
2009        | ENUM attribute_list_opt type_name
2010          '{' enumerator_list comma_opt '}'
2011                { $$ = DeclarationNode::newEnum( $3->type->symbolic.name, $5, true )->addQualifiers( $2 ); }
2012        | enum_type_nobody
2013        ;
2014
2015enum_type_nobody:                                                                               // enum - {...}
2016        ENUM attribute_list_opt no_attr_identifier
2017                {
2018                        typedefTable.makeTypedef( *$3 );
2019                        $$ = DeclarationNode::newEnum( $3, 0, false )->addQualifiers( $2 );
2020                }
2021        | ENUM attribute_list_opt type_name
2022                {
2023                        typedefTable.makeTypedef( *$3->type->symbolic.name );
2024                        $$ = DeclarationNode::newEnum( $3->type->symbolic.name, 0, false )->addQualifiers( $2 );
2025                }
2026        ;
2027
2028enumerator_list:
2029        no_attr_identifier_or_type_name enumerator_value_opt
2030                { $$ = DeclarationNode::newEnumConstant( $1, $2 ); }
2031        | enumerator_list ',' no_attr_identifier_or_type_name enumerator_value_opt
2032                { $$ = $1->appendList( DeclarationNode::newEnumConstant( $3, $4 ) ); }
2033        ;
2034
2035enumerator_value_opt:
2036        // empty
2037                { $$ = nullptr; }
2038        | '=' constant_expression
2039                { $$ = $2; }
2040        ;
2041
2042cfa_parameter_ellipsis_list_opt:                                                        // CFA, abstract + real
2043        // empty
2044                { $$ = DeclarationNode::newBasicType( DeclarationNode::Void ); }
2045        | ELLIPSIS
2046                { $$ = nullptr; }
2047        | cfa_abstract_parameter_list
2048        | cfa_parameter_list
2049        | cfa_parameter_list pop ',' push cfa_abstract_parameter_list
2050                { $$ = $1->appendList( $5 ); }
2051        | cfa_abstract_parameter_list pop ',' push ELLIPSIS
2052                { $$ = $1->addVarArgs(); }
2053        | cfa_parameter_list pop ',' push ELLIPSIS
2054                { $$ = $1->addVarArgs(); }
2055        ;
2056
2057cfa_parameter_list:                                                                             // CFA
2058                // To obtain LR(1) between cfa_parameter_list and cfa_abstract_tuple, the last cfa_abstract_parameter_list is
2059                // factored out from cfa_parameter_list, flattening the rules to get lookahead to the ']'.
2060        cfa_parameter_declaration
2061        | cfa_abstract_parameter_list pop ',' push cfa_parameter_declaration
2062                { $$ = $1->appendList( $5 ); }
2063        | cfa_parameter_list pop ',' push cfa_parameter_declaration
2064                { $$ = $1->appendList( $5 ); }
2065        | cfa_parameter_list pop ',' push cfa_abstract_parameter_list pop ',' push cfa_parameter_declaration
2066                { $$ = $1->appendList( $5 )->appendList( $9 ); }
2067        ;
2068
2069cfa_abstract_parameter_list:                                                    // CFA, new & old style abstract
2070        cfa_abstract_parameter_declaration
2071        | cfa_abstract_parameter_list pop ',' push cfa_abstract_parameter_declaration
2072                { $$ = $1->appendList( $5 ); }
2073        ;
2074
2075parameter_type_list_opt:
2076        // empty
2077                { $$ = nullptr; }
2078        | ELLIPSIS
2079                { $$ = nullptr; }
2080        | parameter_list
2081        | parameter_list pop ',' push ELLIPSIS
2082                { $$ = $1->addVarArgs(); }
2083        ;
2084
2085parameter_list:                                                                                 // abstract + real
2086        abstract_parameter_declaration
2087        | parameter_declaration
2088        | parameter_list pop ',' push abstract_parameter_declaration
2089                { $$ = $1->appendList( $5 ); }
2090        | parameter_list pop ',' push parameter_declaration
2091                { $$ = $1->appendList( $5 ); }
2092        ;
2093
2094// Provides optional identifier names (abstract_declarator/variable_declarator), no initialization, different semantics
2095// for typedef name by using type_parameter_redeclarator instead of typedef_redeclarator, and function prototypes.
2096
2097cfa_parameter_declaration:                                                              // CFA, new & old style parameter declaration
2098        parameter_declaration
2099        | cfa_identifier_parameter_declarator_no_tuple identifier_or_type_name default_initialize_opt
2100                { $$ = $1->addName( $2 ); }
2101        | cfa_abstract_tuple identifier_or_type_name default_initialize_opt
2102                // To obtain LR(1), these rules must be duplicated here (see cfa_abstract_declarator).
2103                { $$ = $1->addName( $2 ); }
2104        | type_qualifier_list cfa_abstract_tuple identifier_or_type_name default_initialize_opt
2105                { $$ = $2->addName( $3 )->addQualifiers( $1 ); }
2106        | cfa_function_specifier
2107        ;
2108
2109cfa_abstract_parameter_declaration:                                             // CFA, new & old style parameter declaration
2110        abstract_parameter_declaration
2111        | cfa_identifier_parameter_declarator_no_tuple
2112        | cfa_abstract_tuple
2113                // To obtain LR(1), these rules must be duplicated here (see cfa_abstract_declarator).
2114        | type_qualifier_list cfa_abstract_tuple
2115                { $$ = $2->addQualifiers( $1 ); }
2116        | cfa_abstract_function
2117        ;
2118
2119parameter_declaration:
2120                // No SUE declaration in parameter list.
2121        declaration_specifier_nobody identifier_parameter_declarator default_initialize_opt
2122                { $$ = $2->addType( $1 )->addInitializer( $3 ? new InitializerNode( $3 ) : nullptr ); }
2123        | declaration_specifier_nobody type_parameter_redeclarator default_initialize_opt
2124                { $$ = $2->addType( $1 )->addInitializer( $3 ? new InitializerNode( $3 ) : nullptr ); }
2125        ;
2126
2127abstract_parameter_declaration:
2128        declaration_specifier_nobody default_initialize_opt
2129                { $$ = $1->addInitializer( $2 ? new InitializerNode( $2 ) : nullptr ); }
2130        | declaration_specifier_nobody abstract_parameter_declarator default_initialize_opt
2131                { $$ = $2->addType( $1 )->addInitializer( $3 ? new InitializerNode( $3 ) : nullptr ); }
2132        ;
2133
2134// ISO/IEC 9899:1999 Section 6.9.1(6) : "An identifier declared as a typedef name shall not be redeclared as a
2135// parameter." Because the scope of the K&R-style parameter-list sees the typedef first, the following is based only on
2136// identifiers.  The ANSI-style parameter-list can redefine a typedef name.
2137
2138identifier_list:                                                                                // K&R-style parameter list => no types
2139        no_attr_identifier
2140                { $$ = DeclarationNode::newName( $1 ); }
2141        | identifier_list ',' no_attr_identifier
2142                { $$ = $1->appendList( DeclarationNode::newName( $3 ) ); }
2143        ;
2144
2145identifier_or_type_name:
2146        identifier
2147        | TYPEDEFname
2148        | TYPEGENname
2149        ;
2150
2151no_attr_identifier_or_type_name:
2152        no_attr_identifier
2153        | TYPEDEFname
2154        | TYPEGENname
2155        ;
2156
2157type_no_function:                                                                               // sizeof, alignof, cast (constructor)
2158        cfa_abstract_declarator_tuple                                           // CFA
2159        | type_specifier
2160        | type_specifier abstract_declarator
2161                { $$ = $2->addType( $1 ); }
2162        ;
2163
2164type:                                                                                                   // typeof, assertion
2165        type_no_function
2166        | cfa_abstract_function                                                         // CFA
2167        ;
2168
2169initializer_opt:
2170        // empty
2171                { $$ = nullptr; }
2172        | '=' initializer
2173                { $$ = $2; }
2174        | '=' VOID
2175                { $$ = new InitializerNode( true ); }
2176        | ATassign initializer
2177                { $$ = $2->set_maybeConstructed( false ); }
2178        ;
2179
2180initializer:
2181        assignment_expression                                           { $$ = new InitializerNode( $1 ); }
2182        | '{' initializer_list_opt comma_opt '}'        { $$ = new InitializerNode( $2, true ); }
2183        ;
2184
2185initializer_list_opt:
2186        // empty
2187                { $$ = nullptr; }
2188        | initializer
2189        | designation initializer                                       { $$ = $2->set_designators( $1 ); }
2190        | initializer_list_opt ',' initializer          { $$ = (InitializerNode *)( $1->set_last( $3 ) ); }
2191        | initializer_list_opt ',' designation initializer
2192                { $$ = (InitializerNode *)( $1->set_last( $4->set_designators( $3 ) ) ); }
2193        ;
2194
2195// There is an unreconcileable parsing problem between C99 and CFA with respect to designators. The problem is use of
2196// '=' to separator the designator from the initializer value, as in:
2197//
2198//              int x[10] = { [1] = 3 };
2199//
2200// The string "[1] = 3" can be parsed as a designator assignment or a tuple assignment.  To disambiguate this case, CFA
2201// changes the syntax from "=" to ":" as the separator between the designator and initializer. GCC does uses ":" for
2202// field selection. The optional use of the "=" in GCC, or in this case ":", cannot be supported either due to
2203// shift/reduce conflicts
2204
2205designation:
2206        designator_list ':'                                                                     // C99, CFA uses ":" instead of "="
2207        | no_attr_identifier ':'                                                        // GCC, field name
2208                { $$ = new ExpressionNode( build_varref( $1 ) ); }
2209        ;
2210
2211designator_list:                                                                                // C99
2212        designator
2213        | designator_list designator
2214                { $$ = (ExpressionNode *)( $1->set_last( $2 ) ); }
2215        //| designator_list designator                                          { $$ = new ExpressionNode( $1, $2 ); }
2216        ;
2217
2218designator:
2219        '.' no_attr_identifier                                                          // C99, field name
2220                { $$ = new ExpressionNode( build_varref( $2 ) ); }
2221        | '[' push assignment_expression pop ']'                        // C99, single array element
2222                // assignment_expression used instead of constant_expression because of shift/reduce conflicts with tuple.
2223                { $$ = $3; }
2224        | '[' push subrange pop ']'                                                     // CFA, multiple array elements
2225                { $$ = $3; }
2226        | '[' push constant_expression ELLIPSIS constant_expression pop ']' // GCC, multiple array elements
2227                { $$ = new ExpressionNode( new RangeExpr( maybeMoveBuild< Expression >( $3 ), maybeMoveBuild< Expression >( $5 ) ) ); }
2228        | '.' '[' push field_list pop ']'                                       // CFA, tuple field selector
2229                { $$ = $4; }
2230        ;
2231
2232// The CFA type system is based on parametric polymorphism, the ability to declare functions with type parameters,
2233// rather than an object-oriented type system. This required four groups of extensions:
2234//
2235// Overloading: function, data, and operator identifiers may be overloaded.
2236//
2237// Type declarations: "type" is used to generate new types for declaring objects. Similarly, "dtype" is used for object
2238//     and incomplete types, and "ftype" is used for function types. Type declarations with initializers provide
2239//     definitions of new types. Type declarations with storage class "extern" provide opaque types.
2240//
2241// Polymorphic functions: A forall clause declares a type parameter. The corresponding argument is inferred at the call
2242//     site. A polymorphic function is not a template; it is a function, with an address and a type.
2243//
2244// Specifications and Assertions: Specifications are collections of declarations parameterized by one or more
2245//     types. They serve many of the purposes of abstract classes, and specification hierarchies resemble subclass
2246//     hierarchies. Unlike classes, they can define relationships between types.  Assertions declare that a type or
2247//     types provide the operations declared by a specification.  Assertions are normally used to declare requirements
2248//     on type arguments of polymorphic functions.
2249
2250type_parameter_list:                                                                    // CFA
2251        type_parameter
2252        | type_parameter_list ',' type_parameter
2253                { $$ = $1->appendList( $3 ); }
2254        ;
2255
2256type_initializer_opt:                                                                   // CFA
2257        // empty
2258                { $$ = nullptr; }
2259        | '=' type
2260                { $$ = $2; }
2261        ;
2262
2263type_parameter:                                                                                 // CFA
2264        type_class no_attr_identifier_or_type_name
2265                { typedefTable.addToScope( *$2, TYPEDEFname, "9" ); }
2266          type_initializer_opt assertion_list_opt
2267                { $$ = DeclarationNode::newTypeParam( $1, $2 )->addTypeInitializer( $4 )->addAssertions( $5 ); }
2268        | type_specifier identifier_parameter_declarator
2269        | assertion_list
2270                { $$ = DeclarationNode::newTypeParam( DeclarationNode::Dtype, new string( DeclarationNode::anonymous.newName() ) )->addAssertions( $1 ); }
2271        ;
2272
2273type_class:                                                                                             // CFA
2274        OTYPE
2275                { $$ = DeclarationNode::Otype; }
2276        | DTYPE
2277                { $$ = DeclarationNode::Dtype; }
2278        | FTYPE
2279                { $$ = DeclarationNode::Ftype; }
2280        | TTYPE
2281                { $$ = DeclarationNode::Ttype; }
2282        ;
2283
2284assertion_list_opt:                                                                             // CFA
2285        // empty
2286                { $$ = nullptr; }
2287        | assertion_list
2288        ;
2289
2290assertion_list:                                                                                 // CFA
2291        assertion
2292        | assertion_list assertion
2293                { $$ = $1 ? $1->appendList( $2 ) : $2; }
2294        ;
2295
2296assertion:                                                                                              // CFA
2297        '|' no_attr_identifier_or_type_name '(' type_list ')'
2298                { $$ = DeclarationNode::newTraitUse( $2, $4 ); }
2299        | '|' '{' push trait_declaration_list pop '}'
2300                { $$ = $4; }
2301        // | '|' '(' push type_parameter_list pop ')' '{' push trait_declaration_list pop '}' '(' type_list ')'
2302        //      { SemanticError( yylloc, "Generic data-type assertion is currently unimplemented." ); $$ = nullptr; }
2303        ;
2304
2305type_list:                                                                                              // CFA
2306        type
2307                { $$ = new ExpressionNode( new TypeExpr( maybeMoveBuildType( $1 ) ) ); }
2308        | assignment_expression
2309                { SemanticError( yylloc, toString("Expression generic parameters are currently unimplemented: ", $1->build()) ); $$ = nullptr; }
2310        | type_list ',' type
2311                { $$ = (ExpressionNode *)( $1->set_last( new ExpressionNode( new TypeExpr( maybeMoveBuildType( $3 ) ) ) ) ); }
2312        | type_list ',' assignment_expression
2313                { SemanticError( yylloc, toString("Expression generic parameters are currently unimplemented: ", $3->build()) ); $$ = nullptr; }
2314                // { $$ = (ExpressionNode *)( $1->set_last( $3 )); }
2315        ;
2316
2317type_declaring_list:                                                                    // CFA
2318        OTYPE type_declarator
2319                { $$ = $2; }
2320        | storage_class_list OTYPE type_declarator
2321                { $$ = $3->addQualifiers( $1 ); }
2322        | type_declaring_list ',' type_declarator
2323                { $$ = $1->appendList( $3->copySpecifiers( $1 ) ); }
2324        ;
2325
2326type_declarator:                                                                                // CFA
2327        type_declarator_name assertion_list_opt
2328                { $$ = $1->addAssertions( $2 ); }
2329        | type_declarator_name assertion_list_opt '=' type
2330                { $$ = $1->addAssertions( $2 )->addType( $4 ); }
2331        ;
2332
2333type_declarator_name:                                                                   // CFA
2334        no_attr_identifier_or_type_name
2335                {
2336                        typedefTable.addToEnclosingScope( *$1, TYPEDEFname, "10" );
2337                        $$ = DeclarationNode::newTypeDecl( $1, 0 );
2338                }
2339        | no_attr_identifier_or_type_name '(' type_parameter_list ')'
2340                {
2341                        typedefTable.addToEnclosingScope( *$1, TYPEGENname, "11" );
2342                        $$ = DeclarationNode::newTypeDecl( $1, $3 );
2343                }
2344        ;
2345
2346trait_specifier:                                                                                // CFA
2347        TRAIT no_attr_identifier_or_type_name '(' type_parameter_list ')' '{' '}'
2348                { $$ = DeclarationNode::newTrait( $2, $4, 0 ); }
2349        | TRAIT no_attr_identifier_or_type_name '(' type_parameter_list ')' '{' push trait_declaration_list pop '}'
2350                { $$ = DeclarationNode::newTrait( $2, $4, $8 ); }
2351        ;
2352
2353trait_declaration_list:                                                                 // CFA
2354        trait_declaration
2355        | trait_declaration_list pop push trait_declaration
2356                { $$ = $1->appendList( $4 ); }
2357        ;
2358
2359trait_declaration:                                                                              // CFA
2360        cfa_trait_declaring_list ';'
2361        | trait_declaring_list ';'
2362        ;
2363
2364cfa_trait_declaring_list:                                                               // CFA
2365        cfa_variable_specifier
2366        | cfa_function_specifier
2367        | cfa_trait_declaring_list pop ',' push identifier_or_type_name
2368                { $$ = $1->appendList( $1->cloneType( $5 ) ); }
2369        ;
2370
2371trait_declaring_list:                                                                   // CFA
2372        type_specifier declarator
2373                { $$ = $2->addType( $1 ); }
2374        | trait_declaring_list pop ',' push declarator
2375                { $$ = $1->appendList( $1->cloneBaseType( $5 ) ); }
2376        ;
2377
2378//***************************** EXTERNAL DEFINITIONS *****************************
2379
2380translation_unit:
2381        // empty, input file
2382        | external_definition_list
2383                { parseTree = parseTree ? parseTree->appendList( $1 ) : $1;     }
2384        ;
2385
2386external_definition_list:
2387        push external_definition pop
2388                { $$ = $2; }
2389        | external_definition_list push external_definition pop
2390                { $$ = $1 ? $1->appendList( $3 ) : $3; }
2391        ;
2392
2393external_definition_list_opt:
2394        // empty
2395                { $$ = nullptr; }
2396        | external_definition_list
2397        ;
2398
2399up:
2400                { typedefTable.up( forall ); forall = false; }
2401        ;
2402
2403down:
2404                { typedefTable.down(); }
2405        ;
2406
2407external_definition:
2408        declaration
2409        | external_function_definition
2410        | EXTENSION external_definition                                         // GCC, multiple __extension__ allowed, meaning unknown
2411                {
2412                        distExt( $2 );                                                          // mark all fields in list
2413                        $$ = $2;
2414                }
2415        | ASM '(' string_literal ')' ';'                                        // GCC, global assembler statement
2416                {
2417                        $$ = DeclarationNode::newAsmStmt( new StatementNode( build_asm( false, $3, 0 ) ) );
2418                }
2419        | EXTERN STRINGliteral                                                          // C++-style linkage specifier
2420                {
2421                        linkageStack.push( linkage );                           // handle nested extern "C"/"Cforall"
2422                        linkage = LinkageSpec::linkageUpdate( yylloc, linkage, $2 );
2423                }
2424          '{' up external_definition_list_opt down '}'
2425                {
2426                        linkage = linkageStack.top();
2427                        linkageStack.pop();
2428                        $$ = $6;
2429                }
2430        | type_qualifier_list
2431                {
2432                        if ( $1->type->qualifiers.val ) { SemanticError( yylloc, "CV qualifiers cannot be distributed; only storage-class and forall qualifiers." ); }
2433                        if ( $1->type->forall ) forall = true;          // remember generic type
2434                }
2435          '{' up external_definition_list_opt down '}'          // CFA, namespace
2436                {
2437                        distQual( $5, $1 );
2438                        forall = false;
2439                        $$ = $5;
2440                }
2441        | declaration_qualifier_list
2442                {
2443                        if ( $1->type && $1->type->qualifiers.val ) { SemanticError( yylloc, "CV qualifiers cannot be distributed; only storage-class and forall qualifiers." ); }
2444                        if ( $1->type && $1->type->forall ) forall = true; // remember generic type
2445                }
2446          '{' up external_definition_list_opt down '}'          // CFA, namespace
2447                {
2448                        distQual( $5, $1 );
2449                        forall = false;
2450                        $$ = $5;
2451                }
2452        | declaration_qualifier_list type_qualifier_list
2453                {
2454                        if ( ($1->type && $1->type->qualifiers.val) || $2->type->qualifiers.val ) { SemanticError( yylloc, "CV qualifiers cannot be distributed; only storage-class and forall qualifiers." ); }
2455                        if ( ($1->type && $1->type->forall) || $2->type->forall ) forall = true; // remember generic type
2456                }
2457          '{' up external_definition_list_opt down '}'          // CFA, namespace
2458                {
2459                        distQual( $6, $1->addQualifiers( $2 ) );
2460                        forall = false;
2461                        $$ = $6;
2462                }
2463        ;
2464
2465external_function_definition:
2466        function_definition
2467                // These rules are a concession to the "implicit int" type_specifier because there is a significant amount of
2468                // legacy code with global functions missing the type-specifier for the return type, and assuming "int".
2469                // Parsing is possible because function_definition does not appear in the context of an expression (nested
2470                // functions preclude this concession, i.e., all nested function must have a return type). A function prototype
2471                // declaration must still have a type_specifier.  OBSOLESCENT (see 1)
2472        | function_declarator compound_statement
2473                { $$ = $1->addFunctionBody( $2 ); }
2474        | KR_function_declarator KR_parameter_list_opt compound_statement
2475                { $$ = $1->addOldDeclList( $2 )->addFunctionBody( $3 ); }
2476        ;
2477
2478with_clause_opt:
2479        // empty
2480                { $$ = nullptr; forall = false; }
2481        | WITH '(' tuple_expression_list ')'
2482                { $$ = $3; forall = false; }
2483        ;
2484
2485function_definition:
2486        cfa_function_declaration with_clause_opt compound_statement     // CFA
2487                {
2488                        // Add the function body to the last identifier in the function definition list, i.e., foo3:
2489                        //   [const double] foo1(), foo2( int ), foo3( double ) { return 3.0; }
2490                        $1->get_last()->addFunctionBody( $3, $2 );
2491                        $$ = $1;
2492                }
2493        | declaration_specifier function_declarator with_clause_opt compound_statement
2494                {
2495                        rebindForall( $1, $2 );
2496                        $$ = $2->addFunctionBody( $4, $3 )->addType( $1 );
2497                }
2498        | declaration_specifier variable_type_redeclarator with_clause_opt compound_statement
2499                {
2500                        rebindForall( $1, $2 );
2501                        $$ = $2->addFunctionBody( $4, $3 )->addType( $1 );
2502                }
2503                // handles default int return type, OBSOLESCENT (see 1)
2504        | type_qualifier_list function_declarator with_clause_opt compound_statement
2505                { $$ = $2->addFunctionBody( $4, $3 )->addQualifiers( $1 ); }
2506                // handles default int return type, OBSOLESCENT (see 1)
2507        | declaration_qualifier_list function_declarator with_clause_opt compound_statement
2508                { $$ = $2->addFunctionBody( $4, $3 )->addQualifiers( $1 ); }
2509                // handles default int return type, OBSOLESCENT (see 1)
2510        | declaration_qualifier_list type_qualifier_list function_declarator with_clause_opt compound_statement
2511                { $$ = $3->addFunctionBody( $5, $4 )->addQualifiers( $2 )->addQualifiers( $1 ); }
2512
2513                // Old-style K&R function definition, OBSOLESCENT (see 4)
2514        | declaration_specifier KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
2515                {
2516                        rebindForall( $1, $2 );
2517                        $$ = $2->addOldDeclList( $3 )->addFunctionBody( $5, $4 )->addType( $1 );
2518                }
2519                // handles default int return type, OBSOLESCENT (see 1)
2520        | type_qualifier_list KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
2521                { $$ = $2->addOldDeclList( $3 )->addFunctionBody( $5, $4 )->addQualifiers( $1 ); }
2522                // handles default int return type, OBSOLESCENT (see 1)
2523        | declaration_qualifier_list KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
2524                { $$ = $2->addOldDeclList( $3 )->addFunctionBody( $5, $4 )->addQualifiers( $1 ); }
2525                // handles default int return type, OBSOLESCENT (see 1)
2526        | declaration_qualifier_list type_qualifier_list KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
2527                { $$ = $3->addOldDeclList( $4 )->addFunctionBody( $6, $5 )->addQualifiers( $2 )->addQualifiers( $1 ); }
2528        ;
2529
2530declarator:
2531        variable_declarator
2532        | variable_type_redeclarator
2533        | function_declarator
2534        ;
2535
2536subrange:
2537        constant_expression '~' constant_expression                     // CFA, integer subrange
2538                { $$ = new ExpressionNode( new RangeExpr( maybeMoveBuild< Expression >( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
2539        ;
2540
2541asm_name_opt:                                                                                   // GCC
2542        // empty
2543                { $$ = nullptr; }
2544        | ASM '(' string_literal ')' attribute_list_opt
2545                {
2546                        DeclarationNode * name = new DeclarationNode();
2547                        name->asmName = $3;
2548                        $$ = name->addQualifiers( $5 );
2549                }
2550        ;
2551
2552attribute_list_opt:                                                                             // GCC
2553        // empty
2554                { $$ = nullptr; }
2555        | attribute_list
2556        ;
2557
2558attribute_list:                                                                                 // GCC
2559        attribute
2560        | attribute_list attribute
2561                { $$ = $2->addQualifiers( $1 ); }
2562        ;
2563
2564attribute:                                                                                              // GCC
2565        ATTRIBUTE '(' '(' attribute_name_list ')' ')'
2566                { $$ = $4; }
2567        ;
2568
2569attribute_name_list:                                                                    // GCC
2570        attribute_name
2571        | attribute_name_list ',' attribute_name
2572                { $$ = $3->addQualifiers( $1 ); }
2573        ;
2574
2575attribute_name:                                                                                 // GCC
2576        // empty
2577                { $$ = nullptr; }
2578        | attr_name
2579                { $$ = DeclarationNode::newAttribute( $1 ); }
2580        | attr_name '(' argument_expression_list ')'
2581                { $$ = DeclarationNode::newAttribute( $1, $3 ); }
2582        ;
2583
2584attr_name:                                                                                              // GCC
2585        IDENTIFIER
2586        | quasi_keyword
2587        | TYPEDEFname
2588        | TYPEGENname
2589        | FALLTHROUGH
2590                { $$ = Token{ new string( "fallthrough" ), { nullptr, -1 } }; }
2591        | CONST
2592                { $$ = Token{ new string( "__const__" ), { nullptr, -1 } }; }
2593        ;
2594
2595// ============================================================================
2596// The following sections are a series of grammar patterns used to parse declarators. Multiple patterns are necessary
2597// because the type of an identifier in wrapped around the identifier in the same form as its usage in an expression, as
2598// in:
2599//
2600//              int (*f())[10] { ... };
2601//              ... (*f())[3] += 1;             // definition mimics usage
2602//
2603// Because these patterns are highly recursive, changes at a lower level in the recursion require copying some or all of
2604// the pattern. Each of these patterns has some subtle variation to ensure correct syntax in a particular context.
2605// ============================================================================
2606
2607// ----------------------------------------------------------------------------
2608// The set of valid declarators before a compound statement for defining a function is less than the set of declarators
2609// to define a variable or function prototype, e.g.:
2610//
2611//              valid declaration               invalid definition
2612//              -----------------               ------------------
2613//              int f;                                  int f {}
2614//              int *f;                                 int *f {}
2615//              int f[10];                              int f[10] {}
2616//              int (*f)(int);                  int (*f)(int) {}
2617//
2618// To preclude this syntactic anomaly requires separating the grammar rules for variable and function declarators, hence
2619// variable_declarator and function_declarator.
2620// ----------------------------------------------------------------------------
2621
2622// This pattern parses a declaration of a variable that is not redefining a typedef name. The pattern precludes
2623// declaring an array of functions versus a pointer to an array of functions.
2624
2625variable_declarator:
2626        paren_identifier attribute_list_opt
2627                { $$ = $1->addQualifiers( $2 ); }
2628        | variable_ptr
2629        | variable_array attribute_list_opt
2630                { $$ = $1->addQualifiers( $2 ); }
2631        | variable_function attribute_list_opt
2632                { $$ = $1->addQualifiers( $2 ); }
2633        ;
2634
2635paren_identifier:
2636        identifier
2637                { $$ = DeclarationNode::newName( $1 ); }
2638        | '(' paren_identifier ')'                                                      // redundant parenthesis
2639                { $$ = $2; }
2640        ;
2641
2642variable_ptr:
2643        ptrref_operator variable_declarator
2644                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2645        | ptrref_operator type_qualifier_list variable_declarator
2646                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2647        | '(' variable_ptr ')' attribute_list_opt
2648                { $$ = $2->addQualifiers( $4 ); }                               // redundant parenthesis
2649        ;
2650
2651variable_array:
2652        paren_identifier array_dimension
2653                { $$ = $1->addArray( $2 ); }
2654        | '(' variable_ptr ')' array_dimension
2655                { $$ = $2->addArray( $4 ); }
2656        | '(' variable_array ')' multi_array_dimension          // redundant parenthesis
2657                { $$ = $2->addArray( $4 ); }
2658        | '(' variable_array ')'                                                        // redundant parenthesis
2659                { $$ = $2; }
2660        ;
2661
2662variable_function:
2663        '(' variable_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2664                { $$ = $2->addParamList( $6 ); }
2665        | '(' variable_function ')'                                                     // redundant parenthesis
2666                { $$ = $2; }
2667        ;
2668
2669// This pattern parses a function declarator that is not redefining a typedef name. For non-nested functions, there is
2670// no context where a function definition can redefine a typedef name, i.e., the typedef and function name cannot exist
2671// is the same scope.  The pattern precludes returning arrays and functions versus pointers to arrays and functions.
2672
2673function_declarator:
2674        function_no_ptr attribute_list_opt
2675                { $$ = $1->addQualifiers( $2 ); }
2676        | function_ptr
2677        | function_array attribute_list_opt
2678                { $$ = $1->addQualifiers( $2 ); }
2679        ;
2680
2681function_no_ptr:
2682        paren_identifier '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2683                { $$ = $1->addParamList( $4 ); }
2684        | '(' function_ptr ')' '(' push parameter_type_list_opt pop ')'
2685                { $$ = $2->addParamList( $6 ); }
2686        | '(' function_no_ptr ')'                                                       // redundant parenthesis
2687                { $$ = $2; }
2688        ;
2689
2690function_ptr:
2691        ptrref_operator function_declarator
2692                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2693        | ptrref_operator type_qualifier_list function_declarator
2694                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2695        | '(' function_ptr ')'
2696                { $$ = $2; }
2697        ;
2698
2699function_array:
2700        '(' function_ptr ')' array_dimension
2701                { $$ = $2->addArray( $4 ); }
2702        | '(' function_array ')' multi_array_dimension          // redundant parenthesis
2703                { $$ = $2->addArray( $4 ); }
2704        | '(' function_array ')'                                                        // redundant parenthesis
2705                { $$ = $2; }
2706        ;
2707
2708// This pattern parses an old-style K&R function declarator (OBSOLESCENT, see 4)
2709//
2710//   f( a, b, c ) int a, *b, c[]; {}
2711//
2712// that is not redefining a typedef name (see function_declarator for additional comments). The pattern precludes
2713// returning arrays and functions versus pointers to arrays and functions.
2714
2715KR_function_declarator:
2716        KR_function_no_ptr
2717        | KR_function_ptr
2718        | KR_function_array
2719        ;
2720
2721KR_function_no_ptr:
2722        paren_identifier '(' identifier_list ')'                        // function_declarator handles empty parameter
2723                { $$ = $1->addIdList( $3 ); }
2724        | '(' KR_function_ptr ')' '(' push parameter_type_list_opt pop ')'
2725                { $$ = $2->addParamList( $6 ); }
2726        | '(' KR_function_no_ptr ')'                                            // redundant parenthesis
2727                { $$ = $2; }
2728        ;
2729
2730KR_function_ptr:
2731        ptrref_operator KR_function_declarator
2732                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2733        | ptrref_operator type_qualifier_list KR_function_declarator
2734                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2735        | '(' KR_function_ptr ')'
2736                { $$ = $2; }
2737        ;
2738
2739KR_function_array:
2740        '(' KR_function_ptr ')' array_dimension
2741                { $$ = $2->addArray( $4 ); }
2742        | '(' KR_function_array ')' multi_array_dimension       // redundant parenthesis
2743                { $$ = $2->addArray( $4 ); }
2744        | '(' KR_function_array ')'                                                     // redundant parenthesis
2745                { $$ = $2; }
2746        ;
2747
2748// This pattern parses a declaration for a variable or function prototype that redefines a type name, e.g.:
2749//
2750//              typedef int foo;
2751//              {
2752//                 int foo; // redefine typedef name in new scope
2753//              }
2754//
2755// The pattern precludes declaring an array of functions versus a pointer to an array of functions, and returning arrays
2756// and functions versus pointers to arrays and functions.
2757
2758variable_type_redeclarator:
2759        paren_type attribute_list_opt
2760                { $$ = $1->addQualifiers( $2 ); }
2761        | type_ptr
2762        | type_array attribute_list_opt
2763                { $$ = $1->addQualifiers( $2 ); }
2764        | type_function attribute_list_opt
2765                { $$ = $1->addQualifiers( $2 ); }
2766        ;
2767
2768paren_type:
2769        typedef
2770                // hide type name in enclosing scope by variable name
2771                { typedefTable.addToEnclosingScope( *$1->name, IDENTIFIER, "ID" ); }
2772        | '(' paren_type ')'
2773                { $$ = $2; }
2774        ;
2775
2776type_ptr:
2777        ptrref_operator variable_type_redeclarator
2778                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2779        | ptrref_operator type_qualifier_list variable_type_redeclarator
2780                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2781        | '(' type_ptr ')' attribute_list_opt
2782                { $$ = $2->addQualifiers( $4 ); }
2783        ;
2784
2785type_array:
2786        paren_type array_dimension
2787                { $$ = $1->addArray( $2 ); }
2788        | '(' type_ptr ')' array_dimension
2789                { $$ = $2->addArray( $4 ); }
2790        | '(' type_array ')' multi_array_dimension                      // redundant parenthesis
2791                { $$ = $2->addArray( $4 ); }
2792        | '(' type_array ')'                                                            // redundant parenthesis
2793                { $$ = $2; }
2794        ;
2795
2796type_function:
2797        paren_type '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2798                { $$ = $1->addParamList( $4 ); }
2799        | '(' type_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2800                { $$ = $2->addParamList( $6 ); }
2801        | '(' type_function ')'                                                         // redundant parenthesis
2802                { $$ = $2; }
2803        ;
2804
2805// This pattern parses a declaration for a parameter variable of a function prototype or actual that is not redefining a
2806// typedef name and allows the C99 array options, which can only appear in a parameter list.  The pattern precludes
2807// declaring an array of functions versus a pointer to an array of functions, and returning arrays and functions versus
2808// pointers to arrays and functions.
2809
2810identifier_parameter_declarator:
2811        paren_identifier attribute_list_opt
2812                { $$ = $1->addQualifiers( $2 ); }
2813        | '&' MUTEX paren_identifier attribute_list_opt
2814                { $$ = $3->addPointer( DeclarationNode::newPointer( DeclarationNode::newTypeQualifier( Type::Mutex ), OperKinds::AddressOf ) )->addQualifiers( $4 ); }
2815        | identifier_parameter_ptr
2816        | identifier_parameter_array attribute_list_opt
2817                { $$ = $1->addQualifiers( $2 ); }
2818        | identifier_parameter_function attribute_list_opt
2819                { $$ = $1->addQualifiers( $2 ); }
2820        ;
2821
2822identifier_parameter_ptr:
2823        ptrref_operator identifier_parameter_declarator
2824                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2825        | ptrref_operator type_qualifier_list identifier_parameter_declarator
2826                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2827        | '(' identifier_parameter_ptr ')' attribute_list_opt
2828                { $$ = $2->addQualifiers( $4 ); }
2829        ;
2830
2831identifier_parameter_array:
2832        paren_identifier array_parameter_dimension
2833                { $$ = $1->addArray( $2 ); }
2834        | '(' identifier_parameter_ptr ')' array_dimension
2835                { $$ = $2->addArray( $4 ); }
2836        | '(' identifier_parameter_array ')' multi_array_dimension // redundant parenthesis
2837                { $$ = $2->addArray( $4 ); }
2838        | '(' identifier_parameter_array ')'                            // redundant parenthesis
2839                { $$ = $2; }
2840        ;
2841
2842identifier_parameter_function:
2843        paren_identifier '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2844                { $$ = $1->addParamList( $4 ); }
2845        | '(' identifier_parameter_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2846                { $$ = $2->addParamList( $6 ); }
2847        | '(' identifier_parameter_function ')'                         // redundant parenthesis
2848                { $$ = $2; }
2849        ;
2850
2851// This pattern parses a declaration for a parameter variable or function prototype that is redefining a typedef name,
2852// e.g.:
2853//
2854//              typedef int foo;
2855//              forall( otype T ) struct foo;
2856//              int f( int foo ); // redefine typedef name in new scope
2857//
2858// and allows the C99 array options, which can only appear in a parameter list.
2859
2860type_parameter_redeclarator:
2861        typedef attribute_list_opt
2862                { $$ = $1->addQualifiers( $2 ); }
2863        | '&' MUTEX typedef attribute_list_opt
2864                { $$ = $3->addPointer( DeclarationNode::newPointer( DeclarationNode::newTypeQualifier( Type::Mutex ), OperKinds::AddressOf ) )->addQualifiers( $4 ); }
2865        | type_parameter_ptr
2866        | type_parameter_array attribute_list_opt
2867                { $$ = $1->addQualifiers( $2 ); }
2868        | type_parameter_function attribute_list_opt
2869                { $$ = $1->addQualifiers( $2 ); }
2870        ;
2871
2872typedef:
2873        TYPEDEFname
2874                { $$ = DeclarationNode::newName( $1 ); }
2875        | TYPEGENname
2876                { $$ = DeclarationNode::newName( $1 ); }
2877        ;
2878
2879type_parameter_ptr:
2880        ptrref_operator type_parameter_redeclarator
2881                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2882        | ptrref_operator type_qualifier_list type_parameter_redeclarator
2883                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2884        | '(' type_parameter_ptr ')' attribute_list_opt
2885                { $$ = $2->addQualifiers( $4 ); }
2886        ;
2887
2888type_parameter_array:
2889        typedef array_parameter_dimension
2890                { $$ = $1->addArray( $2 ); }
2891        | '(' type_parameter_ptr ')' array_parameter_dimension
2892                { $$ = $2->addArray( $4 ); }
2893        ;
2894
2895type_parameter_function:
2896        typedef '(' push parameter_type_list_opt pop ')'        // empty parameter list OBSOLESCENT (see 3)
2897                { $$ = $1->addParamList( $4 ); }
2898        | '(' type_parameter_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2899                { $$ = $2->addParamList( $6 ); }
2900        ;
2901
2902// This pattern parses a declaration of an abstract variable or function prototype, i.e., there is no identifier to
2903// which the type applies, e.g.:
2904//
2905//              sizeof( int );
2906//              sizeof( int * );
2907//              sizeof( int [10] );
2908//              sizeof( int (*)() );
2909//              sizeof( int () );
2910//
2911// The pattern precludes declaring an array of functions versus a pointer to an array of functions, and returning arrays
2912// and functions versus pointers to arrays and functions.
2913
2914abstract_declarator:
2915        abstract_ptr
2916        | abstract_array attribute_list_opt
2917                { $$ = $1->addQualifiers( $2 ); }
2918        | abstract_function attribute_list_opt
2919                { $$ = $1->addQualifiers( $2 ); }
2920        ;
2921
2922abstract_ptr:
2923        ptrref_operator
2924                { $$ = DeclarationNode::newPointer( 0, $1 ); }
2925        | ptrref_operator type_qualifier_list
2926                { $$ = DeclarationNode::newPointer( $2, $1 ); }
2927        | ptrref_operator abstract_declarator
2928                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2929        | ptrref_operator type_qualifier_list abstract_declarator
2930                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2931        | '(' abstract_ptr ')' attribute_list_opt
2932                { $$ = $2->addQualifiers( $4 ); }
2933        ;
2934
2935abstract_array:
2936        array_dimension
2937        | '(' abstract_ptr ')' array_dimension
2938                { $$ = $2->addArray( $4 ); }
2939        | '(' abstract_array ')' multi_array_dimension          // redundant parenthesis
2940                { $$ = $2->addArray( $4 ); }
2941        | '(' abstract_array ')'                                                        // redundant parenthesis
2942                { $$ = $2; }
2943        ;
2944
2945abstract_function:
2946        '(' push parameter_type_list_opt pop ')'                        // empty parameter list OBSOLESCENT (see 3)
2947                { $$ = DeclarationNode::newFunction( nullptr, nullptr, $3, nullptr ); }
2948        | '(' abstract_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2949                { $$ = $2->addParamList( $6 ); }
2950        | '(' abstract_function ')'                                                     // redundant parenthesis
2951                { $$ = $2; }
2952        ;
2953
2954array_dimension:
2955                // Only the first dimension can be empty.
2956        '[' ']'
2957                { $$ = DeclarationNode::newArray( 0, 0, false ); }
2958        | '[' ']' multi_array_dimension
2959                { $$ = DeclarationNode::newArray( 0, 0, false )->addArray( $3 ); }
2960        | multi_array_dimension
2961        ;
2962
2963multi_array_dimension:
2964        '[' push assignment_expression pop ']'
2965                { $$ = DeclarationNode::newArray( $3, 0, false ); }
2966        | '[' push '*' pop ']'                                                          // C99
2967                { $$ = DeclarationNode::newVarArray( 0 ); }
2968        | multi_array_dimension '[' push assignment_expression pop ']'
2969                { $$ = $1->addArray( DeclarationNode::newArray( $4, 0, false ) ); }
2970        | multi_array_dimension '[' push '*' pop ']'            // C99
2971                { $$ = $1->addArray( DeclarationNode::newVarArray( 0 ) ); }
2972        ;
2973
2974// This pattern parses a declaration of a parameter abstract variable or function prototype, i.e., there is no
2975// identifier to which the type applies, e.g.:
2976//
2977//              int f( int );                   // not handled here
2978//              int f( int * );                 // abstract function-prototype parameter; no parameter name specified
2979//              int f( int (*)() );             // abstract function-prototype parameter; no parameter name specified
2980//              int f( int (int) );             // abstract function-prototype parameter; no parameter name specified
2981//
2982// The pattern precludes declaring an array of functions versus a pointer to an array of functions, and returning arrays
2983// and functions versus pointers to arrays and functions. In addition, the pattern handles the
2984// special meaning of parenthesis around a typedef name:
2985//
2986//              ISO/IEC 9899:1999 Section 6.7.5.3(11) : "In a parameter declaration, a single typedef name in
2987//              parentheses is taken to be an abstract declarator that specifies a function with a single parameter,
2988//              not as redundant parentheses around the identifier."
2989//
2990// For example:
2991//
2992//              typedef float T;
2993//              int f( int ( T [5] ) );                                 // see abstract_parameter_declarator
2994//              int g( int ( T ( int ) ) );                             // see abstract_parameter_declarator
2995//              int f( int f1( T a[5] ) );                              // see identifier_parameter_declarator
2996//              int g( int g1( T g2( int p ) ) );               // see identifier_parameter_declarator
2997//
2998// In essence, a '(' immediately to the left of typedef name, T, is interpreted as starting a parameter type list, and
2999// not as redundant parentheses around a redeclaration of T. Finally, the pattern also precludes declaring an array of
3000// functions versus a pointer to an array of functions, and returning arrays and functions versus pointers to arrays and
3001// functions.
3002
3003abstract_parameter_declarator:
3004        abstract_parameter_ptr
3005        | '&' MUTEX attribute_list_opt
3006                { $$ = DeclarationNode::newPointer( DeclarationNode::newTypeQualifier( Type::Mutex ), OperKinds::AddressOf )->addQualifiers( $3 ); }
3007        | abstract_parameter_array attribute_list_opt
3008                { $$ = $1->addQualifiers( $2 ); }
3009        | abstract_parameter_function attribute_list_opt
3010                { $$ = $1->addQualifiers( $2 ); }
3011        ;
3012
3013abstract_parameter_ptr:
3014        ptrref_operator
3015                { $$ = DeclarationNode::newPointer( nullptr, $1 ); }
3016        | ptrref_operator type_qualifier_list
3017                { $$ = DeclarationNode::newPointer( $2, $1 ); }
3018        | ptrref_operator abstract_parameter_declarator
3019                { $$ = $2->addPointer( DeclarationNode::newPointer( nullptr, $1 ) ); }
3020        | ptrref_operator type_qualifier_list abstract_parameter_declarator
3021                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
3022        | '(' abstract_parameter_ptr ')' attribute_list_opt
3023                { $$ = $2->addQualifiers( $4 ); }
3024        ;
3025
3026abstract_parameter_array:
3027        array_parameter_dimension
3028        | '(' abstract_parameter_ptr ')' array_parameter_dimension
3029                { $$ = $2->addArray( $4 ); }
3030        | '(' abstract_parameter_array ')' multi_array_dimension // redundant parenthesis
3031                { $$ = $2->addArray( $4 ); }
3032        | '(' abstract_parameter_array ')'                                      // redundant parenthesis
3033                { $$ = $2; }
3034        ;
3035
3036abstract_parameter_function:
3037        '(' push parameter_type_list_opt pop ')'                        // empty parameter list OBSOLESCENT (see 3)
3038                { $$ = DeclarationNode::newFunction( nullptr, nullptr, $3, nullptr ); }
3039        | '(' abstract_parameter_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
3040                { $$ = $2->addParamList( $6 ); }
3041        | '(' abstract_parameter_function ')'                           // redundant parenthesis
3042                { $$ = $2; }
3043        ;
3044
3045array_parameter_dimension:
3046                // Only the first dimension can be empty or have qualifiers.
3047        array_parameter_1st_dimension
3048        | array_parameter_1st_dimension multi_array_dimension
3049                { $$ = $1->addArray( $2 ); }
3050        | multi_array_dimension
3051        ;
3052
3053// The declaration of an array parameter has additional syntax over arrays in normal variable declarations:
3054//
3055//              ISO/IEC 9899:1999 Section 6.7.5.2(1) : "The optional type qualifiers and the keyword static shall appear only in
3056//              a declaration of a function parameter with an array type, and then only in the outermost array type derivation."
3057
3058array_parameter_1st_dimension:
3059        '[' ']'
3060                { $$ = DeclarationNode::newArray( 0, 0, false ); }
3061                // multi_array_dimension handles the '[' '*' ']' case
3062        | '[' push type_qualifier_list '*' pop ']'                      // remaining C99
3063                { $$ = DeclarationNode::newVarArray( $3 ); }
3064        | '[' push type_qualifier_list pop ']'
3065                { $$ = DeclarationNode::newArray( 0, $3, false ); }
3066                // multi_array_dimension handles the '[' assignment_expression ']' case
3067        | '[' push type_qualifier_list assignment_expression pop ']'
3068                { $$ = DeclarationNode::newArray( $4, $3, false ); }
3069        | '[' push STATIC type_qualifier_list_opt assignment_expression pop ']'
3070                { $$ = DeclarationNode::newArray( $5, $4, true ); }
3071        | '[' push type_qualifier_list STATIC assignment_expression pop ']'
3072                { $$ = DeclarationNode::newArray( $5, $3, true ); }
3073        ;
3074
3075// This pattern parses a declaration of an abstract variable, but does not allow "int ()" for a function pointer.
3076//
3077//              struct S {
3078//          int;
3079//          int *;
3080//          int [10];
3081//          int (*)();
3082//      };
3083
3084variable_abstract_declarator:
3085        variable_abstract_ptr
3086        | variable_abstract_array attribute_list_opt
3087                { $$ = $1->addQualifiers( $2 ); }
3088        | variable_abstract_function attribute_list_opt
3089                { $$ = $1->addQualifiers( $2 ); }
3090        ;
3091
3092variable_abstract_ptr:
3093        ptrref_operator
3094                { $$ = DeclarationNode::newPointer( 0, $1 ); }
3095        | ptrref_operator type_qualifier_list
3096                { $$ = DeclarationNode::newPointer( $2, $1 ); }
3097        | ptrref_operator variable_abstract_declarator
3098                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3099        | ptrref_operator type_qualifier_list variable_abstract_declarator
3100                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
3101        | '(' variable_abstract_ptr ')' attribute_list_opt
3102                { $$ = $2->addQualifiers( $4 ); }
3103        ;
3104
3105variable_abstract_array:
3106        array_dimension
3107        | '(' variable_abstract_ptr ')' array_dimension
3108                { $$ = $2->addArray( $4 ); }
3109        | '(' variable_abstract_array ')' multi_array_dimension // redundant parenthesis
3110                { $$ = $2->addArray( $4 ); }
3111        | '(' variable_abstract_array ')'                                       // redundant parenthesis
3112                { $$ = $2; }
3113        ;
3114
3115variable_abstract_function:
3116        '(' variable_abstract_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
3117                { $$ = $2->addParamList( $6 ); }
3118        | '(' variable_abstract_function ')'                            // redundant parenthesis
3119                { $$ = $2; }
3120        ;
3121
3122// This pattern parses a new-style declaration for a parameter variable or function prototype that is either an
3123// identifier or typedef name and allows the C99 array options, which can only appear in a parameter list.
3124
3125cfa_identifier_parameter_declarator_tuple:                              // CFA
3126        cfa_identifier_parameter_declarator_no_tuple
3127        | cfa_abstract_tuple
3128        | type_qualifier_list cfa_abstract_tuple
3129                { $$ = $2->addQualifiers( $1 ); }
3130        ;
3131
3132cfa_identifier_parameter_declarator_no_tuple:                   // CFA
3133        cfa_identifier_parameter_ptr
3134        | cfa_identifier_parameter_array
3135        ;
3136
3137cfa_identifier_parameter_ptr:                                                   // CFA
3138                // No SUE declaration in parameter list.
3139        ptrref_operator type_specifier_nobody
3140                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3141        | type_qualifier_list ptrref_operator type_specifier_nobody
3142                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3143        | ptrref_operator cfa_abstract_function
3144                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3145        | type_qualifier_list ptrref_operator cfa_abstract_function
3146                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3147        | ptrref_operator cfa_identifier_parameter_declarator_tuple
3148                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3149        | type_qualifier_list ptrref_operator cfa_identifier_parameter_declarator_tuple
3150                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3151        ;
3152
3153cfa_identifier_parameter_array:                                                 // CFA
3154                // Only the first dimension can be empty or have qualifiers. Empty dimension must be factored out due to
3155                // shift/reduce conflict with new-style empty (void) function return type.
3156        '[' ']' type_specifier_nobody
3157                { $$ = $3->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
3158        | cfa_array_parameter_1st_dimension type_specifier_nobody
3159                { $$ = $2->addNewArray( $1 ); }
3160        | '[' ']' multi_array_dimension type_specifier_nobody
3161                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
3162        | cfa_array_parameter_1st_dimension multi_array_dimension type_specifier_nobody
3163                { $$ = $3->addNewArray( $2 )->addNewArray( $1 ); }
3164        | multi_array_dimension type_specifier_nobody
3165                { $$ = $2->addNewArray( $1 ); }
3166
3167        | '[' ']' cfa_identifier_parameter_ptr
3168                { $$ = $3->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
3169        | cfa_array_parameter_1st_dimension cfa_identifier_parameter_ptr
3170                { $$ = $2->addNewArray( $1 ); }
3171        | '[' ']' multi_array_dimension cfa_identifier_parameter_ptr
3172                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
3173        | cfa_array_parameter_1st_dimension multi_array_dimension cfa_identifier_parameter_ptr
3174                { $$ = $3->addNewArray( $2 )->addNewArray( $1 ); }
3175        | multi_array_dimension cfa_identifier_parameter_ptr
3176                { $$ = $2->addNewArray( $1 ); }
3177        ;
3178
3179cfa_array_parameter_1st_dimension:
3180        '[' push type_qualifier_list '*' pop ']'                        // remaining C99
3181                { $$ = DeclarationNode::newVarArray( $3 ); }
3182        | '[' push type_qualifier_list assignment_expression pop ']'
3183                { $$ = DeclarationNode::newArray( $4, $3, false ); }
3184        | '[' push declaration_qualifier_list assignment_expression pop ']'
3185                // declaration_qualifier_list must be used because of shift/reduce conflict with
3186                // assignment_expression, so a semantic check is necessary to preclude them as a type_qualifier cannot
3187                // appear in this context.
3188                { $$ = DeclarationNode::newArray( $4, $3, true ); }
3189        | '[' push declaration_qualifier_list type_qualifier_list assignment_expression pop ']'
3190                { $$ = DeclarationNode::newArray( $5, $4->addQualifiers( $3 ), true ); }
3191        ;
3192
3193// This pattern parses a new-style declaration of an abstract variable or function prototype, i.e., there is no
3194// identifier to which the type applies, e.g.:
3195//
3196//              [int] f( int );                         // abstract variable parameter; no parameter name specified
3197//              [int] f( [int] (int) );         // abstract function-prototype parameter; no parameter name specified
3198//
3199// These rules need LR(3):
3200//
3201//              cfa_abstract_tuple identifier_or_type_name
3202//              '[' cfa_parameter_list ']' identifier_or_type_name '(' cfa_parameter_ellipsis_list_opt ')'
3203//
3204// since a function return type can be syntactically identical to a tuple type:
3205//
3206//              [int, int] t;
3207//              [int, int] f( int );
3208//
3209// Therefore, it is necessary to look at the token after identifier_or_type_name to know when to reduce
3210// cfa_abstract_tuple. To make this LR(1), several rules have to be flattened (lengthened) to allow the necessary
3211// lookahead. To accomplish this, cfa_abstract_declarator has an entry point without tuple, and tuple declarations are
3212// duplicated when appearing with cfa_function_specifier.
3213
3214cfa_abstract_declarator_tuple:                                                  // CFA
3215        cfa_abstract_tuple
3216        | type_qualifier_list cfa_abstract_tuple
3217                { $$ = $2->addQualifiers( $1 ); }
3218        | cfa_abstract_declarator_no_tuple
3219        ;
3220
3221cfa_abstract_declarator_no_tuple:                                               // CFA
3222        cfa_abstract_ptr
3223        | cfa_abstract_array
3224        ;
3225
3226cfa_abstract_ptr:                                                                               // CFA
3227        ptrref_operator type_specifier
3228                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3229        | type_qualifier_list ptrref_operator type_specifier
3230                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3231        | ptrref_operator cfa_abstract_function
3232                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3233        | type_qualifier_list ptrref_operator cfa_abstract_function
3234                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3235        | ptrref_operator cfa_abstract_declarator_tuple
3236                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3237        | type_qualifier_list ptrref_operator cfa_abstract_declarator_tuple
3238                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3239        ;
3240
3241cfa_abstract_array:                                                                             // CFA
3242                // Only the first dimension can be empty. Empty dimension must be factored out due to shift/reduce conflict with
3243                // empty (void) function return type.
3244        '[' ']' type_specifier
3245                { $$ = $3->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
3246        | '[' ']' multi_array_dimension type_specifier
3247                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
3248        | multi_array_dimension type_specifier
3249                { $$ = $2->addNewArray( $1 ); }
3250        | '[' ']' cfa_abstract_ptr
3251                { $$ = $3->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
3252        | '[' ']' multi_array_dimension cfa_abstract_ptr
3253                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
3254        | multi_array_dimension cfa_abstract_ptr
3255                { $$ = $2->addNewArray( $1 ); }
3256        ;
3257
3258cfa_abstract_tuple:                                                                             // CFA
3259        '[' push cfa_abstract_parameter_list pop ']'
3260                { $$ = DeclarationNode::newTuple( $3 ); }
3261        | '[' push type_specifier_nobody ELLIPSIS pop ']'
3262                { SemanticError( yylloc, "Tuple array currently unimplemented." ); $$ = nullptr; }
3263        | '[' push type_specifier_nobody ELLIPSIS constant_expression pop ']'
3264                { SemanticError( yylloc, "Tuple array currently unimplemented." ); $$ = nullptr; }
3265        ;
3266
3267cfa_abstract_function:                                                                  // CFA
3268//      '[' ']' '(' cfa_parameter_ellipsis_list_opt ')'
3269//              { $$ = DeclarationNode::newFunction( nullptr, DeclarationNode::newTuple( nullptr ), $4, nullptr ); }
3270        cfa_abstract_tuple '(' push cfa_parameter_ellipsis_list_opt pop ')'
3271                { $$ = DeclarationNode::newFunction( nullptr, $1, $4, nullptr ); }
3272        | cfa_function_return '(' push cfa_parameter_ellipsis_list_opt pop ')'
3273                { $$ = DeclarationNode::newFunction( nullptr, $1, $4, nullptr ); }
3274        ;
3275
3276// 1) ISO/IEC 9899:1999 Section 6.7.2(2) : "At least one type specifier shall be given in the declaration specifiers in
3277//    each declaration, and in the specifier-qualifier list in each structure declaration and type name."
3278//
3279// 2) ISO/IEC 9899:1999 Section 6.11.5(1) : "The placement of a storage-class specifier other than at the beginning of
3280//    the declaration specifiers in a declaration is an obsolescent feature."
3281//
3282// 3) ISO/IEC 9899:1999 Section 6.11.6(1) : "The use of function declarators with empty parentheses (not
3283//    prototype-format parameter type declarators) is an obsolescent feature."
3284//
3285// 4) ISO/IEC 9899:1999 Section 6.11.7(1) : "The use of function definitions with separate parameter identifier and
3286//    declaration lists (not prototype-format parameter type and identifier declarators) is an obsolescent feature.
3287
3288//************************* MISCELLANEOUS ********************************
3289
3290comma_opt:                                                                                              // redundant comma
3291        // empty
3292        | ','
3293        ;
3294
3295default_initialize_opt:
3296        // empty
3297                { $$ = nullptr; }
3298        | '=' assignment_expression
3299                { $$ = $2; }
3300        ;
3301
3302%%
3303
3304// ----end of grammar----
3305
3306// Local Variables: //
3307// mode: c++ //
3308// tab-width: 4 //
3309// compile-command: "make install" //
3310// End: //
Note: See TracBrowser for help on using the repository browser.