source: src/Parser/parser.yy@ adb60242

//
// Cforall Version 1.0.0 Copyright (C) 2015 University of Waterloo
//
// The contents of this file are covered under the licence agreement in the
// file "LICENCE" distributed with Cforall.
//
// parser.yy --
//
// Author           : Peter A. Buhr
// Created On       : Sat Sep  1 20:22:55 2001
// Last Modified By : Peter A. Buhr
// Last Modified On : Fri Jun 29 10:31:42 2018
// Update Count     : 3596
//

// This grammar is based on the ANSI99/11 C grammar, specifically parts of EXPRESSION and STATEMENTS, and on the C
// grammar by James A. Roskind, specifically parts of DECLARATIONS and EXTERNAL DEFINITIONS.  While parts have been
// copied, important changes have been made in all sections; these changes are sufficient to constitute a new grammar.
// In particular, this grammar attempts to be more syntactically precise, i.e., it parses less incorrect language syntax
// that must be subsequently rejected by semantic checks.  Nevertheless, there are still several semantic checks
// required and many are noted in the grammar. Finally, the grammar is extended with GCC and CFA language extensions.

// Acknowledgments to Richard Bilson, Glen Ditchfield, and Rodolfo Gabriel Esteves who all helped when I got stuck with
// the grammar.

// The root language for this grammar is ANSI99/11 C. All of ANSI99/11 is parsed, except for:
//
// 1. designation with '=' (use ':' instead)
//
// Most of the syntactic extensions from ANSI90 to ANSI11 C are marked with the comment "C99/C11". This grammar also has
// two levels of extensions. The first extensions cover most of the GCC C extensions, except for:
//
// 1. designation with and without '=' (use ':' instead)
// 2. attributes not allowed in parenthesis of declarator
//
// All of the syntactic extensions for GCC C are marked with the comment "GCC". The second extensions are for Cforall
// (CFA), which fixes several of C's outstanding problems and extends C with many modern language concepts. All of the
// syntactic extensions for CFA C are marked with the comment "CFA". As noted above, there is one unreconcileable
// parsing problem between C99 and CFA with respect to designators; this is discussed in detail before the "designation"
// grammar rule.

%{
#define YYDEBUG_LEXER_TEXT (yylval)                                             // lexer loads this up each time
#define YYDEBUG 1                                                                               // get the pretty debugging code to compile
#define YYERROR_VERBOSE                                                                 // more information in syntax errors

#undef __GNUC_MINOR__

#include <cstdio>
#include <stack>
using namespace std;

#include "ParseNode.h"
#include "TypedefTable.h"
#include "TypeData.h"
#include "LinkageSpec.h"
#include "Common/SemanticError.h"                                               // error_str
#include "Common/utility.h"                                                             // for maybeMoveBuild, maybeBuild, CodeLo...

extern DeclarationNode * parseTree;
extern LinkageSpec::Spec linkage;
extern TypedefTable typedefTable;

stack< LinkageSpec::Spec > linkageStack;

bool appendStr( string & to, string & from ) {
        // 1. Multiple strings are concatenated into a single string but not combined internally. The reason is that
        //    "\x12" "3" is treated as 2 characters versus 1 because "escape sequences are converted into single members of
        //    the execution character set just prior to adjacent string literal concatenation" (C11, Section 6.4.5-8). It is
        //    easier to let the C compiler handle this case.
        //
        // 2. String encodings are transformed into canonical form (one encoding at start) so the encoding can be found
        //    without searching the string, e.g.: "abc" L"def" L"ghi" => L"abc" "def" "ghi". Multiple encodings must match,
        //    i.e., u"a" U"b" L"c" is disallowed.

        if ( from[0] != '"' ) {                                                         // encoding ?
                if ( to[0] != '"' ) {                                                   // encoding ?
                        if ( to[0] != from[0] || to[1] != from[1] ) { // different encodings ?
                                yyerror( "non-matching string encodings for string-literal concatenation" );
                                return false;                                                   // parse error, must call YYERROR in action
                        } else if ( from[1] == '8' ) {
                                from.erase( 0, 1 );                                             // remove 2nd encoding
                        } // if
                } else {
                        if ( from[1] == '8' ) {                                         // move encoding to start
                                to = "u8" + to;
                                from.erase( 0, 1 );                                             // remove 2nd encoding
                        } else {
                                to = from[0] + to;
                        } // if
                } // if
                from.erase( 0, 1 );                                                             // remove 2nd encoding
        } // if
        to += " " + from;                                                                       // concatenated into single string
        return true;
} // appendStr

DeclarationNode * distAttr( DeclarationNode * specifier, DeclarationNode * declList ) {
        // distribute declaration_specifier across all declared variables, e.g., static, const, __attribute__.
        DeclarationNode * cur = declList, * cl = (new DeclarationNode)->addType( specifier );
        //cur->addType( specifier );
        for ( cur = dynamic_cast< DeclarationNode * >( cur->get_next() ); cur != nullptr; cur = dynamic_cast< DeclarationNode * >( cur->get_next() ) ) {
                cl->cloneBaseType( cur );
        } // for
        declList->addType( cl );
//      delete cl;
        return declList;
} // distAttr

void distExt( DeclarationNode * declaration ) {
        // distribute EXTENSION across all declarations
        for ( DeclarationNode *iter = declaration; iter != nullptr; iter = (DeclarationNode *)iter->get_next() ) {
                iter->set_extension( true );
        } // for
} // distExt

// There is an ambiguity for inline generic-routine return-types and generic routines.
//   forall( otype T ) struct S { int i; } bar( T ) {}
// Does the forall bind to the struct or the routine, and how would it be possible to explicitly specify the binding.
//   forall( otype T ) struct S { int T; } forall( otype W ) bar( W ) {}
// Currently, the forall is associated with the routine, and the generic type has to be separately defined:
//   forall( otype T ) struct S { int T; };
//   forall( otype W ) bar( W ) {}

void rebindForall( DeclarationNode * declSpec, DeclarationNode * funcDecl ) {
        if ( declSpec->type->kind == TypeData::Aggregate ) { // ignore aggregate definition
                funcDecl->type->forall = declSpec->type->aggregate.params; // move forall from aggregate to function type
                declSpec->type->aggregate.params = nullptr;
        } // if
} // rebindForall

NameExpr * build_postfix_name( const string * name ) {
        NameExpr * new_name = build_varref( new string( "?`" + *name ) );
        delete name;
        return new_name;
} // build_postfix_name

bool forall = false, xxx = false, yyy = false;                  // aggregate have one or more forall qualifiers ?

// https://www.gnu.org/software/bison/manual/bison.html#Location-Type
#define YYLLOC_DEFAULT(Cur, Rhs, N)                                                                                             \
if ( N ) {                                                                                                                                              \
        (Cur).first_line   = YYRHSLOC( Rhs, 1 ).first_line;                                                     \
        (Cur).first_column = YYRHSLOC( Rhs, 1 ).first_column;                                           \
        (Cur).last_line    = YYRHSLOC( Rhs, N ).last_line;                                                      \
        (Cur).last_column  = YYRHSLOC( Rhs, N ).last_column;                                            \
        (Cur).filename     = YYRHSLOC( Rhs, 1 ).filename;                                                       \
} else {                                                                                                                                                \
        (Cur).first_line   = (Cur).last_line = YYRHSLOC( Rhs, 0 ).last_line;            \
        (Cur).first_column = (Cur).last_column = YYRHSLOC( Rhs, 0 ).last_column;        \
        (Cur).filename     = YYRHSLOC( Rhs, 0 ).filename;                                                       \
}
%}

%define parse.error verbose

// Types declaration for productions
%union
{
        Token tok;
        ParseNode * pn;
        ExpressionNode * en;
        DeclarationNode * decl;
        DeclarationNode::Aggregate aggKey;
        DeclarationNode::TypeClass tclass;
        StatementNode * sn;
        WaitForStmt * wfs;
        Expression * constant;
        IfCtl * ifctl;
        ForCtl * fctl;
        LabelNode * label;
        InitializerNode * in;
        OperKinds op;
        std::string * str;
        bool flag;
        CatchStmt::Kind catch_kind;
        GenericExpr * genexpr;
}

//************************* TERMINAL TOKENS ********************************

// keywords
%token TYPEDEF
%token EXTERN STATIC AUTO REGISTER
%token THREADLOCAL                                                                              // C11
%token INLINE FORTRAN                                                                   // C99, extension ISO/IEC 9899:1999 Section J.5.9(1)
%token NORETURN                                                                                 // C11
%token CONST VOLATILE
%token RESTRICT                                                                                 // C99
%token ATOMIC                                                                                   // C11
%token FORALL MUTEX VIRTUAL                                                             // CFA
%token VOID CHAR SHORT INT LONG FLOAT DOUBLE SIGNED UNSIGNED
%token BOOL COMPLEX IMAGINARY                                                   // C99
%token INT128 FLOAT80 FLOAT128                                                  // GCC
%token ZERO_T ONE_T                                                                             // CFA
%token VALIST                                                                                   // GCC
%token TYPEOF LABEL                                                                             // GCC
%token ENUM STRUCT UNION
%token EXCEPTION                                                                                // CFA
%token COROUTINE MONITOR THREAD                                                 // CFA
%token OTYPE FTYPE DTYPE TTYPE TRAIT                                    // CFA
%token SIZEOF OFFSETOF
%token ATTRIBUTE EXTENSION                                                              // GCC
%token IF ELSE SWITCH CASE DEFAULT DO WHILE FOR BREAK CONTINUE GOTO RETURN
%token CHOOSE DISABLE ENABLE FALLTHRU FALLTHROUGH TRY CATCH CATCHRESUME FINALLY THROW THROWRESUME AT WITH WHEN WAITFOR // CFA
%token ASM                                                                                              // C99, extension ISO/IEC 9899:1999 Section J.5.10(1)
%token ALIGNAS ALIGNOF GENERIC STATICASSERT                             // C11

// names and constants: lexer differentiates between identifier and typedef names
%token<tok> IDENTIFIER                  QUOTED_IDENTIFIER               TYPEDEFname                             TYPEGENname
%token<tok> TIMEOUT                             WOR
%token<tok> ATTR_IDENTIFIER             ATTR_TYPEDEFname                ATTR_TYPEGENname
%token<tok> INTEGERconstant             CHARACTERconstant               STRINGliteral
%token<tok> DIRECTIVE
// Floating point constant is broken into three kinds of tokens because of the ambiguity with tuple indexing and
// overloading constants 0/1, e.g., x.1 is lexed as (x)(.1), where (.1) is a factional constant, but is semantically
// converted into the tuple index (.)(1). e.g., 3.x
%token<tok>     FLOATING_DECIMALconstant        FLOATING_FRACTIONconstant       FLOATINGconstant

// multi-character operators
%token ARROW                                                                                    // ->
%token ICR DECR                                                                                 // ++   --
%token LS RS                                                                                    // <<   >>
%token LE GE EQ NE                                                                              // <=   >=      ==      !=
%token ANDAND OROR                                                                              // &&   ||
%token ELLIPSIS                                                                                 // ...

%token EXPassign        MULTassign      DIVassign       MODassign       // \=   *=      /=      %=
%token PLUSassign       MINUSassign                                                     // +=   -=
%token LSassign         RSassign                                                        // <<=  >>=
%token ANDassign        ERassign        ORassign                                // &=   ^=      |=

%token ATassign                                                                                 // @=

%type<tok> identifier  no_attr_identifier
%type<tok> identifier_or_type_name  no_attr_identifier_or_type_name  attr_name
%type<tok> quasi_keyword
%type<constant> string_literal
%type<str> string_literal_list

// expressions
%type<en> constant
%type<en> tuple                                                 tuple_expression_list
%type<op> ptrref_operator                               unary_operator                          assignment_operator
%type<en> primary_expression                    postfix_expression                      unary_expression
%type<en> cast_expression                               exponential_expression          multiplicative_expression       additive_expression
%type<en> shift_expression                              relational_expression           equality_expression
%type<en> AND_expression                                exclusive_OR_expression         inclusive_OR_expression
%type<en> logical_AND_expression                logical_OR_expression
%type<en> conditional_expression                constant_expression                     assignment_expression           assignment_expression_opt
%type<en> comma_expression                              comma_expression_opt
%type<en> argument_expression_list              argument_expression                     default_initialize_opt
%type<ifctl> if_control_expression
%type<fctl> for_control_expression
%type<en> subrange
%type<decl> asm_name_opt
%type<en> asm_operands_opt asm_operands_list asm_operand
%type<label> label_list
%type<en> asm_clobbers_list_opt
%type<flag> asm_volatile_opt
%type<en> handler_predicate_opt
%type<genexpr> generic_association generic_assoc_list

// statements
%type<sn> statement                                             labeled_statement                       compound_statement
%type<sn> statement_decl                                statement_decl_list                     statement_list_nodecl
%type<sn> selection_statement                   if_statement
%type<sn> switch_clause_list_opt                switch_clause_list
%type<en> case_value
%type<sn> case_clause                                   case_value_list                         case_label                                      case_label_list
%type<sn> iteration_statement                   jump_statement
%type<sn> expression_statement                  asm_statement
%type<sn> with_statement
%type<en> with_clause_opt
%type<sn> exception_statement                   handler_clause                          finally_clause
%type<catch_kind> handler_key
%type<sn> mutex_statement
%type<en> when_clause                                   when_clause_opt                         waitfor                                         timeout
%type<sn> waitfor_statement
%type<wfs> waitfor_clause

// declarations
%type<decl> abstract_declarator abstract_ptr abstract_array abstract_function array_dimension multi_array_dimension
%type<decl> abstract_parameter_declarator abstract_parameter_ptr abstract_parameter_array abstract_parameter_function array_parameter_dimension array_parameter_1st_dimension
%type<decl> abstract_parameter_declaration

%type<aggKey> aggregate_key
%type<decl> aggregate_type aggregate_type_nobody

%type<decl> assertion assertion_list assertion_list_opt

%type<en>   bit_subrange_size_opt bit_subrange_size

%type<decl> basic_declaration_specifier basic_type_name basic_type_specifier direct_type indirect_type

%type<decl> trait_declaration trait_declaration_list trait_declaring_list trait_specifier

%type<decl> declaration declaration_list declaration_list_opt declaration_qualifier_list
%type<decl> declaration_specifier declaration_specifier_nobody declarator declaring_list

%type<decl> elaborated_type elaborated_type_nobody

%type<decl> enumerator_list enum_type enum_type_nobody
%type<en> enumerator_value_opt

%type<decl> external_definition external_definition_list external_definition_list_opt

%type<decl> exception_declaration

%type<decl> field_declaration field_declaration_list_opt field_declarator_opt field_declaring_list
%type<en> field field_list field_name fraction_constants_opt

%type<decl> external_function_definition function_definition function_array function_declarator function_no_ptr function_ptr

%type<decl> identifier_parameter_declarator identifier_parameter_ptr identifier_parameter_array identifier_parameter_function
%type<decl> identifier_list

%type<decl> cfa_abstract_array cfa_abstract_declarator_no_tuple cfa_abstract_declarator_tuple
%type<decl> cfa_abstract_function cfa_abstract_parameter_declaration cfa_abstract_parameter_list
%type<decl> cfa_abstract_ptr cfa_abstract_tuple

%type<decl> cfa_array_parameter_1st_dimension

%type<decl> cfa_trait_declaring_list cfa_declaration cfa_field_declaring_list
%type<decl> cfa_function_declaration cfa_function_return cfa_function_specifier

%type<decl> cfa_identifier_parameter_array cfa_identifier_parameter_declarator_no_tuple
%type<decl> cfa_identifier_parameter_declarator_tuple cfa_identifier_parameter_ptr

%type<decl> cfa_parameter_declaration cfa_parameter_list cfa_parameter_ellipsis_list_opt

%type<decl> cfa_typedef_declaration cfa_variable_declaration cfa_variable_specifier

%type<decl> c_declaration static_assert
%type<decl> KR_function_declarator KR_function_no_ptr KR_function_ptr KR_function_array
%type<decl> KR_parameter_list KR_parameter_list_opt

%type<decl> parameter_declaration parameter_list parameter_type_list_opt

%type<decl> paren_identifier paren_type

%type<decl> storage_class storage_class_list

%type<decl> sue_declaration_specifier sue_declaration_specifier_nobody sue_type_specifier sue_type_specifier_nobody

%type<tclass> type_class
%type<decl> type_declarator type_declarator_name type_declaring_list

%type<decl> type_declaration_specifier type_type_specifier type_name typegen_name
%type<decl> typedef typedef_declaration typedef_expression

%type<decl> variable_type_redeclarator type_ptr type_array type_function

%type<decl> type_parameter_redeclarator type_parameter_ptr type_parameter_array type_parameter_function

%type<decl> type type_no_function
%type<decl> type_parameter type_parameter_list type_initializer_opt

%type<en> type_list

%type<decl> type_qualifier type_qualifier_name forall type_qualifier_list_opt type_qualifier_list
%type<decl> type_specifier type_specifier_nobody

%type<decl> variable_declarator variable_ptr variable_array variable_function
%type<decl> variable_abstract_declarator variable_abstract_ptr variable_abstract_array variable_abstract_function

%type<decl> attribute_list_opt attribute_list attribute_name_list attribute attribute_name

// initializers
%type<in>  initializer initializer_list_opt initializer_opt

// designators
%type<en>  designator designator_list designation


// Handle shift/reduce conflict for dangling else by shifting the ELSE token. For example, this string is ambiguous:
//   .---------.                                matches IF '(' comma_expression ')' statement . (reduce)
//   if ( C ) S1 else S2
//   `-----------------'                matches IF '(' comma_expression ')' statement . (shift) ELSE statement */
// Similar issues exit with the waitfor statement.

// Order of these lines matters (low-to-high precedence). THEN is left associative over WOR/TIMEOUT/ELSE, WOR is left
// associative over TIMEOUT/ELSE, and TIMEOUT is left associative over ELSE.
%precedence THEN        // rule precedence for IF/WAITFOR statement
%precedence WOR         // token precedence for start of WOR in WAITFOR statement
%precedence TIMEOUT     // token precedence for start of TIMEOUT in WAITFOR statement
%precedence ELSE        // token precedence for start of else clause in IF/WAITFOR statement

// Handle shift/reduce conflict for generic type by shifting the '(' token. For example, this string is ambiguous:
//   forall( otype T ) struct Foo { T v; };
//       .-----.                                matches pointer to function returning a generic (which is impossible without a type)
//   Foo ( *fp )( int );
//   `---'                                              matches start of TYPEGENname '('
// Must be:
//   Foo( int ) ( *fp )( int );

// Order of these lines matters (low-to-high precedence).
%precedence TYPEGENname
%precedence '('

%locations                                                                                              // support location tracking for error messages

%start translation_unit                                                                 // parse-tree root

%%
//************************* Namespace Management ********************************

// The C grammar is not context free because it relies on the distinct terminal symbols "identifier" and "TYPEDEFname",
// which are lexically identical.
//
//   typedef int foo; // identifier foo must now be scanned as TYPEDEFname
//   foo f;           // to allow it to appear in this context
//
// While it may be possible to write a purely context-free grammar, such a grammar would obscure the relationship
// between syntactic and semantic constructs.  Cforall compounds this problem by introducing type names local to the
// scope of a declaration (for instance, those introduced through "forall" qualifiers), and by introducing "type
// generators" -- parameterized types.  This latter type name creates a third class of identifiers, "TYPEGENname", which
// must be distinguished by the lexical scanner.
//
// Since the scanner cannot distinguish among the different classes of identifiers without some context information,
// there is a type table (typedefTable), which holds type names and identifiers that override type names, for each named
// scope. During parsing, semantic actions update the type table by adding new identifiers in the current scope. For
// each context that introduces a name scope, a new level is created in the type table and that level is popped on
// exiting the scope.  Since type names can be local to a particular declaration, each declaration is itself a scope.
// This requires distinguishing between type names that are local to the current declaration scope and those that
// persist past the end of the declaration (i.e., names defined in "typedef" or "otype" declarations).
//
// The non-terminals "push" and "pop" denote the opening and closing of named scopes. Every push has a matching pop in
// the production rule. There are multiple lists of declarations, where each declaration is a named scope, so pop/push
// around the list separator.
//
//  int f( forall(T) T (*f1) T , forall( S ) S (*f2)( S ) );
//      push               pop   push                   pop

push:
                { typedefTable.enterScope(); }
        ;

pop:
                { typedefTable.leaveScope(); }
        ;

//************************* CONSTANTS ********************************

constant:
                // ENUMERATIONconstant is not included here; it is treated as a variable with type "enumeration constant".
        INTEGERconstant                                                         { $$ = new ExpressionNode( build_constantInteger( *$1 ) ); }
        | FLOATING_DECIMALconstant                                      { $$ = new ExpressionNode( build_constantFloat( *$1 ) ); }
        | FLOATING_FRACTIONconstant                                     { $$ = new ExpressionNode( build_constantFloat( *$1 ) ); }
        | FLOATINGconstant                                                      { $$ = new ExpressionNode( build_constantFloat( *$1 ) ); }
        | CHARACTERconstant                                                     { $$ = new ExpressionNode( build_constantChar( *$1 ) ); }
        ;

quasi_keyword:                                                                                  // CFA
        TIMEOUT
        | WOR
        ;

identifier:
        IDENTIFIER
        | ATTR_IDENTIFIER                                                                       // CFA
        | quasi_keyword
        ;

no_attr_identifier:
        IDENTIFIER
        | quasi_keyword
        ;

string_literal:
        string_literal_list                                                     { $$ = build_constantStr( *$1 ); }
        ;

string_literal_list:                                                                    // juxtaposed strings are concatenated
        STRINGliteral                                                           { $$ = $1; } // conversion from tok to str
        | string_literal_list STRINGliteral
                {
                        if ( ! appendStr( *$1, *$2 ) ) YYERROR;         // append 2nd juxtaposed string to 1st
                        delete $2;                                                                      // allocated by lexer
                        $$ = $1;                                                                        // conversion from tok to str
                }
        ;

//************************* EXPRESSIONS ********************************

primary_expression:
        IDENTIFIER                                                                                      // typedef name cannot be used as a variable name
                { $$ = new ExpressionNode( build_varref( $1 ) ); }
        | quasi_keyword
                { $$ = new ExpressionNode( build_varref( $1 ) ); }
        | tuple
        | '(' comma_expression ')'
                { $$ = $2; }
        | '(' compound_statement ')'                                            // GCC, lambda expression
                { $$ = new ExpressionNode( new StmtExpr( dynamic_cast< CompoundStmt * >(maybeMoveBuild< Statement >($2) ) ) ); }
        | constant '`' IDENTIFIER                                                       // CFA, postfix call
                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), $1 ) ); }
        | string_literal '`' IDENTIFIER                                         // CFA, postfix call
                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), new ExpressionNode( $1 ) ) ); }
        | IDENTIFIER '`' IDENTIFIER                                                     // CFA, postfix call
                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), new ExpressionNode( build_varref( $1 ) ) ) ); }
        | tuple '`' IDENTIFIER                                                          // CFA, postfix call
                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), $1 ) ); }
        | '(' comma_expression ')' '`' IDENTIFIER                       // CFA, postfix call
                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $5 ) ), $2 ) ); }
        | type_name '.' no_attr_identifier                                      // CFA, nested type
                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
        | type_name '.' '[' field_list ']'                                      // CFA, nested type / tuple field selector
                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
        | GENERIC '(' assignment_expression ',' generic_assoc_list ')' // C11
                {
                        // add the missing control expression to the GenericExpr and return it
                        $5->control = maybeMoveBuild<Expression>( $3 );
                        $$ = new ExpressionNode( $5 );
                }
        ;

generic_assoc_list:                                                                             // C11
        generic_association
        | generic_assoc_list ',' generic_association
                {
                        // steal the association node from the singleton and delete the wrapper
                        $1->associations.splice($1->associations.end(), $3->associations);
                        delete $3;
                        $$ = $1;
                }
        ;

generic_association:                                                                    // C11
        type_no_function ':' assignment_expression
                {
                        // create a GenericExpr wrapper with one association pair
                        $$ = new GenericExpr( nullptr, { { maybeMoveBuildType($1), maybeMoveBuild<Expression>($3) } } );
                }
        | DEFAULT ':' assignment_expression
                { $$ = new GenericExpr( nullptr, { { maybeMoveBuild<Expression>($3) } } ); }
        ;

postfix_expression:
        primary_expression
        | postfix_expression '[' assignment_expression ']'
                // CFA, comma_expression disallowed in this context because it results in a common user error: subscripting a
                // matrix with x[i,j] instead of x[i][j]. While this change is not backwards compatible, there seems to be
                // little advantage to this feature and many disadvantages. It is possible to write x[(i,j)] in CFA, which is
                // equivalent to the old x[i,j].
                { $$ = new ExpressionNode( build_binary_val( OperKinds::Index, $1, $3 ) ); }
        | postfix_expression '{' argument_expression_list '}' // CFA, constructor call
                {
                        Token fn;
                        fn.str = new std::string( "?{}" );                      // location undefined - use location of '{'?
                        $$ = new ExpressionNode( new ConstructorExpr( build_func( new ExpressionNode( build_varref( fn ) ), (ExpressionNode *)( $1 )->set_last( $3 ) ) ) );
                }
        | postfix_expression '(' argument_expression_list ')'
                { $$ = new ExpressionNode( build_func( $1, $3 ) ); }
        | postfix_expression '.' no_attr_identifier
                { $$ = new ExpressionNode( build_fieldSel( $1, build_varref( $3 ) ) ); }
        | postfix_expression '.' INTEGERconstant                        // CFA, tuple index
                { $$ = new ExpressionNode( build_fieldSel( $1, build_constantInteger( *$3 ) ) ); }
        | postfix_expression FLOATING_FRACTIONconstant          // CFA, tuple index
                { $$ = new ExpressionNode( build_fieldSel( $1, build_field_name_FLOATING_FRACTIONconstant( *$2 ) ) ); }
        | postfix_expression '.' '[' field_list ']'                     // CFA, tuple field selector
                { $$ = new ExpressionNode( build_fieldSel( $1, build_tuple( $4 ) ) ); }
        | postfix_expression ARROW no_attr_identifier
                {
                        $$ = new ExpressionNode( build_pfieldSel( $1, *$3 == "0" || *$3 == "1" ? build_constantInteger( *$3 ) : build_varref( $3 ) ) );
                }
        | postfix_expression ARROW INTEGERconstant                      // CFA, tuple index
                { $$ = new ExpressionNode( build_pfieldSel( $1, build_constantInteger( *$3 ) ) ); }
        | postfix_expression ARROW '[' field_list ']'           // CFA, tuple field selector
                { $$ = new ExpressionNode( build_pfieldSel( $1, build_tuple( $4 ) ) ); }
        | postfix_expression ICR
                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::IncrPost, $1 ) ); }
        | postfix_expression DECR
                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::DecrPost, $1 ) ); }
        | '(' type_no_function ')' '{' initializer_list_opt comma_opt '}' // C99, compound-literal
                { $$ = new ExpressionNode( build_compoundLiteral( $2, new InitializerNode( $5, true ) ) ); }
        | '(' type_no_function ')' '@' '{' initializer_list_opt comma_opt '}' // CFA, explicit C compound-literal
                { $$ = new ExpressionNode( build_compoundLiteral( $2, (new InitializerNode( $6, true ))->set_maybeConstructed( false ) ) ); }
        | '^' primary_expression '{' argument_expression_list '}' // CFA
                {
                        Token fn;
                        fn.str = new string( "^?{}" );                          // location undefined
                        $$ = new ExpressionNode( build_func( new ExpressionNode( build_varref( fn ) ), (ExpressionNode *)( $2 )->set_last( $4 ) ) );
                }
        ;

argument_expression_list:
        argument_expression
        | argument_expression_list ',' argument_expression
                { $$ = (ExpressionNode *)( $1->set_last( $3 )); }
        ;

argument_expression:
        // empty
                { $$ = nullptr; }
        // | '@'                                                                                                // use default argument
        //      { $$ = new ExpressionNode( build_constantInteger( *new string( "2" ) ) ); }
        | assignment_expression
        ;

field_list:                                                                                             // CFA, tuple field selector
        field
        | field_list ',' field                                          { $$ = (ExpressionNode *)$1->set_last( $3 ); }
        ;

field:                                                                                                  // CFA, tuple field selector
        field_name
        | FLOATING_DECIMALconstant field
                { $$ = new ExpressionNode( build_fieldSel( new ExpressionNode( build_field_name_FLOATING_DECIMALconstant( *$1 ) ), maybeMoveBuild<Expression>( $2 ) ) ); }
        | FLOATING_DECIMALconstant '[' field_list ']'
                { $$ = new ExpressionNode( build_fieldSel( new ExpressionNode( build_field_name_FLOATING_DECIMALconstant( *$1 ) ), build_tuple( $3 ) ) ); }
        | field_name '.' field
                { $$ = new ExpressionNode( build_fieldSel( $1, maybeMoveBuild<Expression>( $3 ) ) ); }
        | field_name '.' '[' field_list ']'
                { $$ = new ExpressionNode( build_fieldSel( $1, build_tuple( $4 ) ) ); }
        | field_name ARROW field
                { $$ = new ExpressionNode( build_pfieldSel( $1, maybeMoveBuild<Expression>( $3 ) ) ); }
        | field_name ARROW '[' field_list ']'
                { $$ = new ExpressionNode( build_pfieldSel( $1, build_tuple( $4 ) ) ); }
        ;

field_name:
        INTEGERconstant fraction_constants_opt
                { $$ = new ExpressionNode( build_field_name_fraction_constants( build_constantInteger( *$1 ), $2 ) ); }
        | FLOATINGconstant fraction_constants_opt
                { $$ = new ExpressionNode( build_field_name_fraction_constants( build_field_name_FLOATINGconstant( *$1 ), $2 ) ); }
        | no_attr_identifier fraction_constants_opt
                {
                        $$ = new ExpressionNode( build_field_name_fraction_constants( build_varref( $1 ), $2 ) );
                }
        ;

fraction_constants_opt:
        // empty
                { $$ = nullptr; }
        | fraction_constants_opt FLOATING_FRACTIONconstant
                {
                        Expression * constant = build_field_name_FLOATING_FRACTIONconstant( *$2 );
                        $$ = $1 != nullptr ? new ExpressionNode( build_fieldSel( $1,  constant ) ) : new ExpressionNode( constant );
                }
        ;

unary_expression:
        postfix_expression
                // first location where constant/string can have operator applied: sizeof 3/sizeof "abc" still requires
                // semantics checks, e.g., ++3, 3--, *3, &&3
        | constant
        | string_literal
                { $$ = new ExpressionNode( $1 ); }
        | EXTENSION cast_expression                                                     // GCC
                { $$ = $2->set_extension( true ); }
                // '*' ('&') is separated from unary_operator because of shift/reduce conflict in:
                //              { * X; }         // dereference X
                //              { * int X; } // CFA declaration of pointer to int
        | ptrref_operator cast_expression                                       // CFA
                {
                        switch ( $1 ) {
                          case OperKinds::AddressOf:
                                $$ = new ExpressionNode( new AddressExpr( maybeMoveBuild< Expression >( $2 ) ) );
                                break;
                          case OperKinds::PointTo:
                                $$ = new ExpressionNode( build_unary_val( $1, $2 ) );
                                break;
                          case OperKinds::And:
                                $$ = new ExpressionNode( new AddressExpr( new AddressExpr( maybeMoveBuild< Expression >( $2 ) ) ) );
                                break;
                          default:
                                assert( false );
                        }
                }
        | unary_operator cast_expression
                { $$ = new ExpressionNode( build_unary_val( $1, $2 ) ); }
        | ICR unary_expression
                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::Incr, $2 ) ); }
        | DECR unary_expression
                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::Decr, $2 ) ); }
        | SIZEOF unary_expression
                { $$ = new ExpressionNode( new SizeofExpr( maybeMoveBuild< Expression >( $2 ) ) ); }
        | SIZEOF '(' type_no_function ')'
                { $$ = new ExpressionNode( new SizeofExpr( maybeMoveBuildType( $3 ) ) ); }
        | ALIGNOF unary_expression                                                      // GCC, variable alignment
                { $$ = new ExpressionNode( new AlignofExpr( maybeMoveBuild< Expression >( $2 ) ) ); }
        | ALIGNOF '(' type_no_function ')'                                      // GCC, type alignment
                { $$ = new ExpressionNode( new AlignofExpr( maybeMoveBuildType( $3 ) ) ); }
        | OFFSETOF '(' type_no_function ',' no_attr_identifier ')'
                { $$ = new ExpressionNode( build_offsetOf( $3, build_varref( $5 ) ) ); }
        | ATTR_IDENTIFIER
                { $$ = new ExpressionNode( new AttrExpr( build_varref( $1 ), maybeMoveBuild< Expression >( (ExpressionNode *)nullptr ) ) ); }
        | ATTR_IDENTIFIER '(' argument_expression ')'
                { $$ = new ExpressionNode( new AttrExpr( build_varref( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
        | ATTR_IDENTIFIER '(' type ')'
                { $$ = new ExpressionNode( new AttrExpr( build_varref( $1 ), maybeMoveBuildType( $3 ) ) ); }
        ;

ptrref_operator:
        '*'                                                                                     { $$ = OperKinds::PointTo; }
        | '&'                                                                           { $$ = OperKinds::AddressOf; }
                // GCC, address of label must be handled by semantic check for ref,ref,label
        | ANDAND                                                                        { $$ = OperKinds::And; }
        ;

unary_operator:
        '+'                                                                                     { $$ = OperKinds::UnPlus; }
        | '-'                                                                           { $$ = OperKinds::UnMinus; }
        | '!'                                                                           { $$ = OperKinds::Neg; }
        | '~'                                                                           { $$ = OperKinds::BitNeg; }
        ;

cast_expression:
        unary_expression
        | '(' type_no_function ')' cast_expression
                { $$ = new ExpressionNode( build_cast( $2, $4 ) ); }
        | '(' COROUTINE '&' ')' cast_expression                         // CFA
                { $$ = new ExpressionNode( build_keyword_cast( KeywordCastExpr::Coroutine, $5 ) ); }
        | '(' THREAD '&' ')' cast_expression                            // CFA
                { $$ = new ExpressionNode( build_keyword_cast( KeywordCastExpr::Thread, $5 ) ); }
        | '(' MONITOR '&' ')' cast_expression                           // CFA
                { $$ = new ExpressionNode( build_keyword_cast( KeywordCastExpr::Monitor, $5 ) ); }
                // VIRTUAL cannot be opt because of look ahead issues
        | '(' VIRTUAL ')' cast_expression                                       // CFA
                { $$ = new ExpressionNode( new VirtualCastExpr( maybeMoveBuild< Expression >( $4 ), maybeMoveBuildType( nullptr ) ) ); }
        | '(' VIRTUAL type_no_function ')' cast_expression      // CFA
                { $$ = new ExpressionNode( new VirtualCastExpr( maybeMoveBuild< Expression >( $5 ), maybeMoveBuildType( $3 ) ) ); }
//      | '(' type_no_function ')' tuple
//              { $$ = new ExpressionNode( build_cast( $2, $4 ) ); }
        ;

exponential_expression:
        cast_expression
        | exponential_expression '\\' cast_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::Exp, $1, $3 ) ); }
        ;

multiplicative_expression:
        exponential_expression
        | multiplicative_expression '*' exponential_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::Mul, $1, $3 ) ); }
        | multiplicative_expression '/' exponential_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::Div, $1, $3 ) ); }
        | multiplicative_expression '%' exponential_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::Mod, $1, $3 ) ); }
        ;

additive_expression:
        multiplicative_expression
        | additive_expression '+' multiplicative_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::Plus, $1, $3 ) ); }
        | additive_expression '-' multiplicative_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::Minus, $1, $3 ) ); }
        ;

shift_expression:
        additive_expression
        | shift_expression LS additive_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::LShift, $1, $3 ) ); }
        | shift_expression RS additive_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::RShift, $1, $3 ) ); }
        ;

relational_expression:
        shift_expression
        | relational_expression '<' shift_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::LThan, $1, $3 ) ); }
        | relational_expression '>' shift_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::GThan, $1, $3 ) ); }
        | relational_expression LE shift_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::LEThan, $1, $3 ) ); }
        | relational_expression GE shift_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::GEThan, $1, $3 ) ); }
        ;

equality_expression:
        relational_expression
        | equality_expression EQ relational_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::Eq, $1, $3 ) ); }
        | equality_expression NE relational_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::Neq, $1, $3 ) ); }
        ;

AND_expression:
        equality_expression
        | AND_expression '&' equality_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::BitAnd, $1, $3 ) ); }
        ;

exclusive_OR_expression:
        AND_expression
        | exclusive_OR_expression '^' AND_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::Xor, $1, $3 ) ); }
        ;

inclusive_OR_expression:
        exclusive_OR_expression
        | inclusive_OR_expression '|' exclusive_OR_expression
                { $$ = new ExpressionNode( build_binary_val( OperKinds::BitOr, $1, $3 ) ); }
        ;

logical_AND_expression:
        inclusive_OR_expression
        | logical_AND_expression ANDAND inclusive_OR_expression
                { $$ = new ExpressionNode( build_and_or( $1, $3, true ) ); }
        ;

logical_OR_expression:
        logical_AND_expression
        | logical_OR_expression OROR logical_AND_expression
                { $$ = new ExpressionNode( build_and_or( $1, $3, false ) ); }
        ;

conditional_expression:
        logical_OR_expression
        | logical_OR_expression '?' comma_expression ':' conditional_expression
                { $$ = new ExpressionNode( build_cond( $1, $3, $5 ) ); }
                // FIX ME: computes $1 twice
        | logical_OR_expression '?' /* empty */ ':' conditional_expression // GCC, omitted first operand
                { $$ = new ExpressionNode( build_cond( $1, $1, $4 ) ); }
        ;

constant_expression:
        conditional_expression
        ;

assignment_expression:
                // CFA, assignment is separated from assignment_operator to ensure no assignment operations for tuples
        conditional_expression
        | unary_expression assignment_operator assignment_expression
                { $$ = new ExpressionNode( build_binary_val( $2, $1, $3 ) ); }
        | unary_expression '=' '{' initializer_list_opt comma_opt '}'
                { SemanticError( yylloc, "Initializer assignment is currently unimplemented." ); $$ = nullptr; }
        ;

assignment_expression_opt:
        // empty
                { $$ = nullptr; }
        | assignment_expression
        ;

assignment_operator:
        '='                                                                                     { $$ = OperKinds::Assign; }
        | ATassign                                                                      { $$ = OperKinds::AtAssn; }
        | EXPassign                                                                     { $$ = OperKinds::ExpAssn; }
        | MULTassign                                                            { $$ = OperKinds::MulAssn; }
        | DIVassign                                                                     { $$ = OperKinds::DivAssn; }
        | MODassign                                                                     { $$ = OperKinds::ModAssn; }
        | PLUSassign                                                            { $$ = OperKinds::PlusAssn; }
        | MINUSassign                                                           { $$ = OperKinds::MinusAssn; }
        | LSassign                                                                      { $$ = OperKinds::LSAssn; }
        | RSassign                                                                      { $$ = OperKinds::RSAssn; }
        | ANDassign                                                                     { $$ = OperKinds::AndAssn; }
        | ERassign                                                                      { $$ = OperKinds::ERAssn; }
        | ORassign                                                                      { $$ = OperKinds::OrAssn; }
        ;

tuple:                                                                                                  // CFA, tuple
                // CFA, one assignment_expression is factored out of comma_expression to eliminate a shift/reduce conflict with
                // comma_expression in cfa_identifier_parameter_array and cfa_abstract_array
//      '[' ']'
//              { $$ = new ExpressionNode( build_tuple() ); }
//      | '[' push assignment_expression pop ']'
//              { $$ = new ExpressionNode( build_tuple( $3 ) ); }
        '[' ',' tuple_expression_list ']'
                { $$ = new ExpressionNode( build_tuple( (ExpressionNode *)(new ExpressionNode( nullptr ) )->set_last( $3 ) ) ); }
        | '[' push assignment_expression pop ',' tuple_expression_list ']'
                { $$ = new ExpressionNode( build_tuple( (ExpressionNode *)$3->set_last( $6 ) ) ); }
        ;

tuple_expression_list:
        assignment_expression_opt
        | tuple_expression_list ',' assignment_expression_opt
                { $$ = (ExpressionNode *)$1->set_last( $3 ); }
        ;

comma_expression:
        assignment_expression
        | comma_expression ',' assignment_expression
                { $$ = new ExpressionNode( new CommaExpr( maybeMoveBuild< Expression >( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
        ;

comma_expression_opt:
        // empty
                { $$ = nullptr; }
        | comma_expression
        ;

//*************************** STATEMENTS *******************************

statement:
        labeled_statement
        | compound_statement
        | expression_statement
        | selection_statement
        | iteration_statement
        | jump_statement
        | with_statement
        | mutex_statement
        | waitfor_statement
        | exception_statement
        | enable_disable_statement
                { SemanticError( yylloc, "enable/disable statement is currently unimplemented." ); $$ = nullptr; }
        | asm_statement
        | DIRECTIVE
                { $$ = new StatementNode( build_directive( $1 ) ); }
        ;

labeled_statement:
                // labels cannot be identifiers 0 or 1 or ATTR_IDENTIFIER
        identifier_or_type_name ':' attribute_list_opt statement
                {
                        $$ = $4->add_label( $1, $3 );
                }
        ;

compound_statement:
        '{' '}'
                { $$ = new StatementNode( build_compound( (StatementNode *)0 ) ); }
        | '{' push
          local_label_declaration_opt                                           // GCC, local labels
          statement_decl_list                                                           // C99, intermix declarations and statements
          pop '}'
                { $$ = new StatementNode( build_compound( $4 ) ); }
        ;

statement_decl_list:                                                                    // C99
        statement_decl
        | statement_decl_list statement_decl
                { if ( $1 != 0 ) { $1->set_last( $2 ); $$ = $1; } }
        ;

statement_decl:
        declaration                                                                                     // CFA, new & old style declarations
                { $$ = new StatementNode( $1 ); }
        | EXTENSION declaration                                                         // GCC
                {
                        distExt( $2 );
                        $$ = new StatementNode( $2 );
                }
        | function_definition
                { $$ = new StatementNode( $1 ); }
        | EXTENSION function_definition                                         // GCC
                {
                        distExt( $2 );
                        $$ = new StatementNode( $2 );
                }
        | statement
        ;

statement_list_nodecl:
        statement
        | statement_list_nodecl statement
                { if ( $1 != 0 ) { $1->set_last( $2 ); $$ = $1; } }
        ;

expression_statement:
        comma_expression_opt ';'
                { $$ = new StatementNode( build_expr( $1 ) ); }
        ;

selection_statement:
                        // pop causes a S/R conflict without separating the IF statement into a non-terminal even after resolving
                        // the inherent S/R conflict with THEN/ELSE.
        push if_statement pop
                { $$ = $2; }
        | SWITCH '(' comma_expression ')' case_clause
                { $$ = new StatementNode( build_switch( true, $3, $5 ) ); }
        | SWITCH '(' comma_expression ')' '{' push declaration_list_opt switch_clause_list_opt pop '}' // CFA
                {
                        StatementNode *sw = new StatementNode( build_switch( true, $3, $8 ) );
                        // The semantics of the declaration list is changed to include associated initialization, which is performed
                        // *before* the transfer to the appropriate case clause by hoisting the declarations into a compound
                        // statement around the switch.  Statements after the initial declaration list can never be executed, and
                        // therefore, are removed from the grammar even though C allows it. The change also applies to choose
                        // statement.
                        $$ = $7 ? new StatementNode( build_compound( (StatementNode *)((new StatementNode( $7 ))->set_last( sw )) ) ) : sw;
                }
        | CHOOSE '(' comma_expression ')' case_clause           // CFA
                { $$ = new StatementNode( build_switch( false, $3, $5 ) ); }
        | CHOOSE '(' comma_expression ')' '{' push declaration_list_opt switch_clause_list_opt pop '}' // CFA
                {
                        StatementNode *sw = new StatementNode( build_switch( false, $3, $8 ) );
                        $$ = $7 ? new StatementNode( build_compound( (StatementNode *)((new StatementNode( $7 ))->set_last( sw )) ) ) : sw;
                }
        ;

if_statement:
        IF '(' if_control_expression ')' statement                      %prec THEN
                // explicitly deal with the shift/reduce conflict on if/else
                { $$ = new StatementNode( build_if( $3, $5, nullptr ) ); }
        | IF '(' if_control_expression ')' statement ELSE statement
                { $$ = new StatementNode( build_if( $3, $5, $7 ) ); }
        ;

if_control_expression:
        comma_expression
                { $$ = new IfCtl( nullptr, $1 ); }
        | c_declaration                                                                         // no semi-colon
                { $$ = new IfCtl( $1, nullptr ); }
        | cfa_declaration                                                                       // no semi-colon
                { $$ = new IfCtl( $1, nullptr ); }
        | declaration comma_expression                                          // semi-colon separated
                { $$ = new IfCtl( $1, $2 ); }
        ;

// CASE and DEFAULT clauses are only allowed in the SWITCH statement, precluding Duff's device. In addition, a case
// clause allows a list of values and subranges.

case_value:                                                                                             // CFA
        constant_expression                                                     { $$ = $1; }
        | constant_expression ELLIPSIS constant_expression      // GCC, subrange
                { $$ = new ExpressionNode( new RangeExpr( maybeMoveBuild< Expression >( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
        | subrange                                                                                      // CFA, subrange
        ;

case_value_list:                                                                                // CFA
        case_value                                                                      { $$ = new StatementNode( build_case( $1 ) ); }
                // convert case list, e.g., "case 1, 3, 5:" into "case 1: case 3: case 5"
        | case_value_list ',' case_value                        { $$ = (StatementNode *)($1->set_last( new StatementNode( build_case( $3 ) ) ) ); }
        ;

case_label:                                                                                             // CFA
        CASE case_value_list ':'                                        { $$ = $2; }
        | DEFAULT ':'                                                           { $$ = new StatementNode( build_default() ); }
                // A semantic check is required to ensure only one default clause per switch/choose statement.
        ;

//label_list_opt:
//      // empty
//      | identifier_or_type_name ':'
//      | label_list_opt identifier_or_type_name ':'
//      ;

case_label_list:                                                                                // CFA
        case_label
        | case_label_list case_label                            { $$ = (StatementNode *)( $1->set_last( $2 )); }
        ;

case_clause:                                                                                    // CFA
        case_label_list statement                                       { $$ = $1->append_last_case( new StatementNode( build_compound( $2 ) ) ); }
        ;

switch_clause_list_opt:                                                                 // CFA
        // empty
                { $$ = nullptr; }
        | switch_clause_list
        ;

switch_clause_list:                                                                             // CFA
        case_label_list statement_list_nodecl
                { $$ = $1->append_last_case( new StatementNode( build_compound( $2 ) ) ); }
        | switch_clause_list case_label_list statement_list_nodecl
                { $$ = (StatementNode *)( $1->set_last( $2->append_last_case( new StatementNode( build_compound( $3 ) ) ) ) ); }
        ;

iteration_statement:
        WHILE '(' push if_control_expression ')' statement pop
                { $$ = new StatementNode( build_while( $4, $6 ) ); }
        | DO statement WHILE '(' comma_expression ')' ';'
                { $$ = new StatementNode( build_do_while( $5, $2 ) ); }
        | FOR '(' push for_control_expression ')' statement pop
                { $$ = new StatementNode( build_for( $4, $6 ) ); }
        ;

for_control_expression:
        comma_expression_opt ';' comma_expression_opt ';' comma_expression_opt
                { $$ = new ForCtl( $1, $3, $5 ); }
        | declaration comma_expression_opt ';' comma_expression_opt // C99
                { $$ = new ForCtl( $1, $2, $4 ); }
        ;

jump_statement:
        GOTO identifier_or_type_name ';'
                { $$ = new StatementNode( build_branch( $2, BranchStmt::Goto ) ); }
        | GOTO '*' comma_expression ';'                                         // GCC, computed goto
                // The syntax for the GCC computed goto violates normal expression precedence, e.g., goto *i+3; => goto *(i+3);
                // whereas normal operator precedence yields goto (*i)+3;
                { $$ = new StatementNode( build_computedgoto( $3 ) ); }
                // A semantic check is required to ensure fallthru appears only in the body of a choose statement.
    | fall_through_name ';'                                                             // CFA
                { $$ = new StatementNode( build_branch( BranchStmt::FallThrough ) ); }
    | fall_through_name identifier_or_type_name ';'             // CFA
                { $$ = new StatementNode( build_branch( $2, BranchStmt::FallThrough ) ); }
        | fall_through_name DEFAULT ';'                                         // CFA
                { $$ = new StatementNode( build_branch( BranchStmt::FallThroughDefault ) ); }
        | CONTINUE ';'
                // A semantic check is required to ensure this statement appears only in the body of an iteration statement.
                { $$ = new StatementNode( build_branch( BranchStmt::Continue ) ); }
        | CONTINUE identifier_or_type_name ';'                          // CFA, multi-level continue
                // A semantic check is required to ensure this statement appears only in the body of an iteration statement, and
                // the target of the transfer appears only at the start of an iteration statement.
                { $$ = new StatementNode( build_branch( $2, BranchStmt::Continue ) ); }
        | BREAK ';'
                // A semantic check is required to ensure this statement appears only in the body of an iteration statement.
                { $$ = new StatementNode( build_branch( BranchStmt::Break ) ); }
        | BREAK identifier_or_type_name ';'                                     // CFA, multi-level exit
                // A semantic check is required to ensure this statement appears only in the body of an iteration statement, and
                // the target of the transfer appears only at the start of an iteration statement.
                { $$ = new StatementNode( build_branch( $2, BranchStmt::Break ) ); }
        | RETURN comma_expression_opt ';'
                { $$ = new StatementNode( build_return( $2 ) ); }
        | RETURN '{' initializer_list_opt comma_opt '}'
                { SemanticError( yylloc, "Initializer return is currently unimplemented." ); $$ = nullptr; }
        | THROW assignment_expression_opt ';'                           // handles rethrow
                { $$ = new StatementNode( build_throw( $2 ) ); }
        | THROWRESUME assignment_expression_opt ';'                     // handles reresume
                { $$ = new StatementNode( build_resume( $2 ) ); }
        | THROWRESUME assignment_expression_opt AT assignment_expression ';' // handles reresume
                { $$ = new StatementNode( build_resume_at( $2, $4 ) ); }
        ;

fall_through_name:                                                                              // CFA
        FALLTHRU
        | FALLTHROUGH
        ;

with_statement:
        WITH '(' tuple_expression_list ')' statement
                {
                        $$ = new StatementNode( build_with( $3, $5 ) );
                }
        ;

// If MUTEX becomes a general qualifier, there are shift/reduce conflicts, so change syntax to "with mutex".
mutex_statement:
        MUTEX '(' argument_expression_list ')' statement
                { SemanticError( yylloc, "Mutex statement is currently unimplemented." ); $$ = nullptr; }
        ;

when_clause:
        WHEN '(' comma_expression ')'                           { $$ = $3; }
        ;

when_clause_opt:
        // empty
                { $$ = nullptr; }
        | when_clause
        ;

waitfor:
        WAITFOR '(' cast_expression ')'
                { $$ = $3; }
        | WAITFOR '(' cast_expression ',' argument_expression_list ')'
                { $$ = (ExpressionNode *)$3->set_last( $5 ); }
        ;

timeout:
        TIMEOUT '(' comma_expression ')'                        { $$ = $3; }
        ;

waitfor_clause:
        when_clause_opt waitfor statement                                       %prec THEN
                { $$ = build_waitfor( $2, $3, $1 ); }
        | when_clause_opt waitfor statement WOR waitfor_clause
                { $$ = build_waitfor( $2, $3, $1, $5 ); }
        | when_clause_opt timeout statement                                     %prec THEN
                { $$ = build_waitfor_timeout( $2, $3, $1 ); }
        | when_clause_opt ELSE statement
                { $$ = build_waitfor_timeout( nullptr, $3, $1 ); }
                // "else" must be conditional after timeout or timeout is never triggered (i.e., it is meaningless)
        | when_clause_opt timeout statement WOR ELSE statement
                { SemanticError( yylloc, "else clause must be conditional after timeout or timeout never triggered." ); $$ = nullptr; }
        | when_clause_opt timeout statement WOR when_clause ELSE statement
                { $$ = build_waitfor_timeout( $2, $3, $1, $7, $5 ); }
        ;

waitfor_statement:
        when_clause_opt waitfor statement                                       %prec THEN
                { $$ = new StatementNode( build_waitfor( $2, $3, $1 ) ); }
        | when_clause_opt waitfor statement WOR waitfor_clause
                { $$ = new StatementNode( build_waitfor( $2, $3, $1, $5 ) ); }
        ;

exception_statement:
        TRY compound_statement handler_clause
                { $$ = new StatementNode( build_try( $2, $3, 0 ) ); }
        | TRY compound_statement finally_clause
                { $$ = new StatementNode( build_try( $2, 0, $3 ) ); }
        | TRY compound_statement handler_clause finally_clause
                { $$ = new StatementNode( build_try( $2, $3, $4 ) ); }
        ;

handler_clause:
        handler_key '(' push exception_declaration pop handler_predicate_opt ')' compound_statement pop
                { $$ = new StatementNode( build_catch( $1, $4, $6, $8 ) ); }
        | handler_clause handler_key '(' push exception_declaration pop handler_predicate_opt ')' compound_statement pop
                { $$ = (StatementNode *)$1->set_last( new StatementNode( build_catch( $2, $5, $7, $9 ) ) ); }
        ;

handler_predicate_opt:
        // empty
                { $$ = nullptr; }
        | ';' conditional_expression                            { $$ = $2; }
        ;

handler_key:
        CATCH                                                                           { $$ = CatchStmt::Terminate; }
        | CATCHRESUME                                                           { $$ = CatchStmt::Resume; }
        ;

finally_clause:
        FINALLY compound_statement                                      { $$ = new StatementNode( build_finally( $2 ) ); }
        ;

exception_declaration:
                // No SUE declaration in parameter list.
        type_specifier_nobody
        | type_specifier_nobody declarator
                { $$ = $2->addType( $1 ); }
        | type_specifier_nobody variable_abstract_declarator
                { $$ = $2->addType( $1 ); }
        | cfa_abstract_declarator_tuple no_attr_identifier      // CFA
                { $$ = $1->addName( $2 ); }
        | cfa_abstract_declarator_tuple                                         // CFA
        ;

enable_disable_statement:
        enable_disable_key identifier_list compound_statement
        ;

enable_disable_key:
        ENABLE
        | DISABLE
        ;

asm_statement:
        ASM asm_volatile_opt '(' string_literal ')' ';'
                { $$ = new StatementNode( build_asm( $2, $4, 0 ) ); }
        | ASM asm_volatile_opt '(' string_literal ':' asm_operands_opt ')' ';' // remaining GCC
                { $$ = new StatementNode( build_asm( $2, $4, $6 ) ); }
        | ASM asm_volatile_opt '(' string_literal ':' asm_operands_opt ':' asm_operands_opt ')' ';'
                { $$ = new StatementNode( build_asm( $2, $4, $6, $8 ) ); }
        | ASM asm_volatile_opt '(' string_literal ':' asm_operands_opt ':' asm_operands_opt ':' asm_clobbers_list_opt ')' ';'
                { $$ = new StatementNode( build_asm( $2, $4, $6, $8, $10 ) ); }
        | ASM asm_volatile_opt GOTO '(' string_literal ':' ':' asm_operands_opt ':' asm_clobbers_list_opt ':' label_list ')' ';'
                { $$ = new StatementNode( build_asm( $2, $5, 0, $8, $10, $12 ) ); }
        ;

asm_volatile_opt:                                                                               // GCC
        // empty
                { $$ = false; }
        | VOLATILE
                { $$ = true; }
        ;

asm_operands_opt:                                                                               // GCC
        // empty
                { $$ = nullptr; }                                                               // use default argument
        | asm_operands_list
        ;

asm_operands_list:                                                                              // GCC
        asm_operand
        | asm_operands_list ',' asm_operand
                { $$ = (ExpressionNode *)$1->set_last( $3 ); }
        ;

asm_operand:                                                                                    // GCC
        string_literal '(' constant_expression ')'
                { $$ = new ExpressionNode( new AsmExpr( maybeMoveBuild< Expression >( (ExpressionNode *)nullptr ), $1, maybeMoveBuild< Expression >( $3 ) ) ); }
        | '[' constant_expression ']' string_literal '(' constant_expression ')'
                { $$ = new ExpressionNode( new AsmExpr( maybeMoveBuild< Expression >( $2 ), $4, maybeMoveBuild< Expression >( $6 ) ) ); }
        ;

asm_clobbers_list_opt:                                                                  // GCC
        // empty
                { $$ = nullptr; }                                                               // use default argument
        | string_literal
                { $$ = new ExpressionNode( $1 ); }
        | asm_clobbers_list_opt ',' string_literal
                // set_last returns ParseNode *
                { $$ = (ExpressionNode *)$1->set_last( new ExpressionNode( $3 ) ); }
        ;

label_list:
        no_attr_identifier
                {
                        $$ = new LabelNode(); $$->labels.push_back( *$1 );
                        delete $1;                                                                      // allocated by lexer
                }
        | label_list ',' no_attr_identifier
                {
                        $$ = $1; $1->labels.push_back( *$3 );
                        delete $3;                                                                      // allocated by lexer
                }
        ;

//******************************* DECLARATIONS *********************************

declaration_list_opt:                                                                   // used at beginning of switch statement
        // empty
                { $$ = nullptr; }
        | declaration_list
        ;

declaration_list:
        declaration
        | declaration_list declaration
                { $$ = $1->appendList( $2 ); }
        ;

KR_parameter_list_opt:                                                                  // used to declare parameter types in K&R style functions
        // empty
                { $$ = nullptr; }
        | KR_parameter_list
        ;

KR_parameter_list:
        push c_declaration pop ';'
                { $$ = $2; }
        | KR_parameter_list push c_declaration pop ';'
                { $$ = $1->appendList( $3 ); }
        ;

local_label_declaration_opt:                                                    // GCC, local label
        // empty
        | local_label_declaration_list
        ;

local_label_declaration_list:                                                   // GCC, local label
        LABEL local_label_list ';'
        | local_label_declaration_list LABEL local_label_list ';'
        ;

local_label_list:                                                                               // GCC, local label
        no_attr_identifier_or_type_name
        | local_label_list ',' no_attr_identifier_or_type_name
        ;

declaration:                                                                                    // old & new style declarations
        c_declaration ';'
        | cfa_declaration ';'                                                           // CFA
        | static_assert                                                                         // C11
        ;

static_assert:
        STATICASSERT '(' constant_expression ',' string_literal ')' ';' // C11
                { $$ = DeclarationNode::newStaticAssert( $3, $5 ); }
        | STATICASSERT '(' constant_expression ')' ';'          // CFA
                { $$ = DeclarationNode::newStaticAssert( $3, build_constantStr( *new string( "\"\"" ) ) ); }

// C declaration syntax is notoriously confusing and error prone. Cforall provides its own type, variable and function
// declarations. CFA declarations use the same declaration tokens as in C; however, CFA places declaration modifiers to
// the left of the base type, while C declarations place modifiers to the right of the base type. CFA declaration
// modifiers are interpreted from left to right and the entire type specification is distributed across all variables in
// the declaration list (as in Pascal).  ANSI C and the new CFA declarations may appear together in the same program
// block, but cannot be mixed within a specific declaration.
//
//                      CFA                                     C
//              [10] int x;                     int x[10];              // array of 10 integers
//              [10] * char y;          char *y[10];    // array of 10 pointers to char

cfa_declaration:                                                                                // CFA
        cfa_variable_declaration
        | cfa_typedef_declaration
        | cfa_function_declaration
        | type_declaring_list
        | trait_specifier
        ;

cfa_variable_declaration:                                                               // CFA
        cfa_variable_specifier initializer_opt
                { $$ = $1->addInitializer( $2 ); }
        | declaration_qualifier_list cfa_variable_specifier initializer_opt
                // declaration_qualifier_list also includes type_qualifier_list, so a semantic check is necessary to preclude
                // them as a type_qualifier cannot appear in that context.
                { $$ = $2->addQualifiers( $1 )->addInitializer( $3 ); }
        | cfa_variable_declaration pop ',' push identifier_or_type_name initializer_opt
                { $$ = $1->appendList( $1->cloneType( $5 )->addInitializer( $6 ) ); }
        ;

cfa_variable_specifier:                                                                 // CFA
                // A semantic check is required to ensure asm_name only appears on declarations with implicit or explicit static
                // storage-class
        cfa_abstract_declarator_no_tuple identifier_or_type_name asm_name_opt
                { $$ = $1->addName( $2 )->addAsmName( $3 ); }
        | cfa_abstract_tuple identifier_or_type_name asm_name_opt
                { $$ = $1->addName( $2 )->addAsmName( $3 ); }
        | type_qualifier_list cfa_abstract_tuple identifier_or_type_name asm_name_opt
                { $$ = $2->addQualifiers( $1 )->addName( $3 )->addAsmName( $4 ); }
        ;

cfa_function_declaration:                                                               // CFA
        cfa_function_specifier
        | type_qualifier_list cfa_function_specifier
                { $$ = $2->addQualifiers( $1 ); }
        | declaration_qualifier_list cfa_function_specifier
                { $$ = $2->addQualifiers( $1 ); }
        | declaration_qualifier_list type_qualifier_list cfa_function_specifier
                { $$ = $3->addQualifiers( $1 )->addQualifiers( $2 ); }
        | cfa_function_declaration ',' identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')'
                {
                        // Append the return type at the start (left-hand-side) to each identifier in the list.
                        DeclarationNode * ret = new DeclarationNode;
                        ret->type = maybeClone( $1->type->base );
                        $$ = $1->appendList( DeclarationNode::newFunction( $3, ret, $6, nullptr ) );
                }
        ;

cfa_function_specifier:                                                                 // CFA
//      '[' ']' identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')' // S/R conflict
//              {
//                      $$ = DeclarationNode::newFunction( $3, DeclarationNode::newTuple( 0 ), $6, 0, true );
//              }
//      '[' ']' identifier '(' push cfa_parameter_ellipsis_list_opt pop ')'
//              {
//                      typedefTable.setNextIdentifier( *$5 );
//                      $$ = DeclarationNode::newFunction( $5, DeclarationNode::newTuple( 0 ), $8, 0, true );
//              }
//      | '[' ']' TYPEDEFname '(' push cfa_parameter_ellipsis_list_opt pop ')'
//              {
//                      typedefTable.setNextIdentifier( *$5 );
//                      $$ = DeclarationNode::newFunction( $5, DeclarationNode::newTuple( 0 ), $8, 0, true );
//              }
//      | '[' ']' typegen_name
                // identifier_or_type_name must be broken apart because of the sequence:
                //
                //   '[' ']' identifier_or_type_name '(' cfa_parameter_ellipsis_list_opt ')'
                //   '[' ']' type_specifier
                //
                // type_specifier can resolve to just TYPEDEFname (e.g., typedef int T; int f( T );). Therefore this must be
                // flattened to allow lookahead to the '(' without having to reduce identifier_or_type_name.
        cfa_abstract_tuple identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')'
                // To obtain LR(1 ), this rule must be factored out from function return type (see cfa_abstract_declarator).
                { $$ = DeclarationNode::newFunction( $2, $1, $5, 0 ); }
        | cfa_function_return identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')'
                { $$ = DeclarationNode::newFunction( $2, $1, $5, 0 ); }
        ;

cfa_function_return:                                                                    // CFA
        '[' push cfa_parameter_list pop ']'
                { $$ = DeclarationNode::newTuple( $3 ); }
        | '[' push cfa_parameter_list pop ',' push cfa_abstract_parameter_list pop ']'
                // To obtain LR(1 ), the last cfa_abstract_parameter_list is added into this flattened rule to lookahead to the ']'.
                { $$ = DeclarationNode::newTuple( $3->appendList( $7 ) ); }
        ;

cfa_typedef_declaration:                                                                // CFA
        TYPEDEF cfa_variable_specifier
                {
                        typedefTable.addToEnclosingScope( *$2->name, TYPEDEFname, "1" );
                        $$ = $2->addTypedef();
                }
        | TYPEDEF cfa_function_specifier
                {
                        typedefTable.addToEnclosingScope( *$2->name, TYPEDEFname, "2" );
                        $$ = $2->addTypedef();
                }
        | cfa_typedef_declaration pop ',' push no_attr_identifier
                {
                        typedefTable.addToEnclosingScope( *$5, TYPEDEFname, "3" );
                        $$ = $1->appendList( $1->cloneType( $5 ) );
                }
        ;

// Traditionally typedef is part of storage-class specifier for syntactic convenience only. Here, it is factored out as
// a separate form of declaration, which syntactically precludes storage-class specifiers and initialization.

typedef_declaration:
        TYPEDEF type_specifier declarator
                {
                        typedefTable.addToEnclosingScope( *$3->name, TYPEDEFname, "4" );
                        $$ = $3->addType( $2 )->addTypedef();
                }
        | typedef_declaration pop ',' push declarator
                {
                        typedefTable.addToEnclosingScope( *$5->name, TYPEDEFname, "5" );
                        $$ = $1->appendList( $1->cloneBaseType( $5 )->addTypedef() );
                }
        | type_qualifier_list TYPEDEF type_specifier declarator // remaining OBSOLESCENT (see 2 )
                {
                        typedefTable.addToEnclosingScope( *$4->name, TYPEDEFname, "6" );
                        $$ = $4->addType( $3 )->addQualifiers( $1 )->addTypedef();
                }
        | type_specifier TYPEDEF declarator
                {
                        typedefTable.addToEnclosingScope( *$3->name, TYPEDEFname, "7" );
                        $$ = $3->addType( $1 )->addTypedef();
                }
        | type_specifier TYPEDEF type_qualifier_list declarator
                {
                        typedefTable.addToEnclosingScope( *$4->name, TYPEDEFname, "8" );
                        $$ = $4->addQualifiers( $1 )->addTypedef()->addType( $1 );
                }
        ;

typedef_expression:
                // GCC, naming expression type: typedef name = exp; gives a name to the type of an expression
        TYPEDEF no_attr_identifier '=' assignment_expression
                {
                        // $$ = DeclarationNode::newName( 0 );                  // unimplemented
                        SemanticError( yylloc, "Typedef expression is currently unimplemented." ); $$ = nullptr;
                }
        | typedef_expression pop ',' push no_attr_identifier '=' assignment_expression
                {
                        // $$ = DeclarationNode::newName( 0 );                  // unimplemented
                        SemanticError( yylloc, "Typedef expression is currently unimplemented." ); $$ = nullptr;
                }
        ;

//c_declaration:
//      declaring_list pop ';'
//      | typedef_declaration pop ';'
//      | typedef_expression pop ';'                                            // GCC, naming expression type
//      | sue_declaration_specifier pop ';'
//      ;
//
//declaring_list:
//              // A semantic check is required to ensure asm_name only appears on declarations with implicit or explicit static
//              // storage-class
//       declarator asm_name_opt initializer_opt
//              {
//                      typedefTable.addToEnclosingScope( IDENTIFIER );
//                      $$ = ( $2->addType( $1 ))->addAsmName( $3 )->addInitializer( $4 );
//              }
//      | declaring_list ',' attribute_list_opt declarator asm_name_opt initializer_opt
//              {
//                      typedefTable.addToEnclosingScope( IDENTIFIER );
//                      $$ = $1->appendList( $1->cloneBaseType( $4->addAsmName( $5 )->addInitializer( $6 ) ) );
//              }
//      ;

c_declaration:
        declaration_specifier declaring_list
                { $$ = distAttr( $1, $2 ); }
        | typedef_declaration
        | typedef_expression                                                            // GCC, naming expression type
        | sue_declaration_specifier
        ;

declaring_list:
                // A semantic check is required to ensure asm_name only appears on declarations with implicit or explicit static
                // storage-class
        declarator asm_name_opt initializer_opt
                { $$ = $1->addAsmName( $2 )->addInitializer( $3 ); }
        | declaring_list ',' attribute_list_opt declarator asm_name_opt initializer_opt
                { $$ = $1->appendList( $4->addQualifiers( $3 )->addAsmName( $5 )->addInitializer( $6 ) ); }
        ;

declaration_specifier:                                                                  // type specifier + storage class
        basic_declaration_specifier
        | sue_declaration_specifier
        | type_declaration_specifier
        ;

declaration_specifier_nobody:                                                   // type specifier + storage class - {...}
                // Preclude SUE declarations in restricted scopes:
                //
                //    int f( struct S { int i; } s1, Struct S s2 ) { struct S s3; ... }
                //
                // because it is impossible to call f due to name equivalence.
        basic_declaration_specifier
        | sue_declaration_specifier_nobody
        | type_declaration_specifier
        ;

type_specifier:                                                                                 // type specifier
        basic_type_specifier
        | sue_type_specifier
        | type_type_specifier
        ;

type_specifier_nobody:                                                                  // type specifier - {...}
                // Preclude SUE declarations in restricted scopes:
                //
                //    int f( struct S { int i; } s1, Struct S s2 ) { struct S s3; ... }
                //
                // because it is impossible to call f due to name equivalence.
        basic_type_specifier
        | sue_type_specifier_nobody
        | type_type_specifier
        ;

type_qualifier_list_opt:                                                                // GCC, used in asm_statement
        // empty
                { $$ = nullptr; }
        | type_qualifier_list
        ;

type_qualifier_list:
                // A semantic check is necessary to ensure a type qualifier is appropriate for the kind of declaration.
                //
                // ISO/IEC 9899:1999 Section 6.7.3(4 ) : If the same qualifier appears more than once in the same
                // specifier-qualifier-list, either directly or via one or more typedefs, the behavior is the same as if it
                // appeared only once.
        type_qualifier
        | type_qualifier_list type_qualifier
                { $$ = $1->addQualifiers( $2 ); }
        ;

type_qualifier:
        type_qualifier_name
        | attribute
        ;

type_qualifier_name:
        CONST
                { $$ = DeclarationNode::newTypeQualifier( Type::Const ); }
        | RESTRICT
                { $$ = DeclarationNode::newTypeQualifier( Type::Restrict ); }
        | VOLATILE
                { $$ = DeclarationNode::newTypeQualifier( Type::Volatile ); }
        | ATOMIC
                { $$ = DeclarationNode::newTypeQualifier( Type::Atomic ); }
        | forall
        ;

forall:
        FORALL '(' type_parameter_list ')'                                      // CFA
                { $$ = DeclarationNode::newForall( $3 ); }
        ;

declaration_qualifier_list:
        storage_class_list
        | type_qualifier_list storage_class_list                        // remaining OBSOLESCENT (see 2 )
                { $$ = $1->addQualifiers( $2 ); }
        | declaration_qualifier_list type_qualifier_list storage_class_list
                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
        ;

storage_class_list:
                // A semantic check is necessary to ensure a storage class is appropriate for the kind of declaration and that
                // only one of each is specified, except for inline, which can appear with the others.
                //
                // ISO/IEC 9899:1999 Section 6.7.1(2) : At most, one storage-class specifier may be given in the declaration
                // specifiers in a declaration.
        storage_class
        | storage_class_list storage_class
                { $$ = $1->addQualifiers( $2 ); }
        ;

storage_class:
        EXTERN
                { $$ = DeclarationNode::newStorageClass( Type::Extern ); }
        | STATIC
                { $$ = DeclarationNode::newStorageClass( Type::Static ); }
        | AUTO
                { $$ = DeclarationNode::newStorageClass( Type::Auto ); }
        | REGISTER
                { $$ = DeclarationNode::newStorageClass( Type::Register ); }
        | THREADLOCAL                                                                           // C11
                { $$ = DeclarationNode::newStorageClass( Type::Threadlocal ); }
                // Put function specifiers here to simplify parsing rules, but separate them semantically.
        | INLINE                                                                                        // C99
                { $$ = DeclarationNode::newFuncSpecifier( Type::Inline ); }
        | FORTRAN                                                                                       // C99
                { $$ = DeclarationNode::newFuncSpecifier( Type::Fortran ); }
        | NORETURN                                                                                      // C11
                { $$ = DeclarationNode::newFuncSpecifier( Type::Noreturn ); }
        ;

basic_type_name:
        VOID
                { $$ = DeclarationNode::newBasicType( DeclarationNode::Void ); }
        | BOOL                                                                                          // C99
                { $$ = DeclarationNode::newBasicType( DeclarationNode::Bool ); }
        | CHAR
                { $$ = DeclarationNode::newBasicType( DeclarationNode::Char ); }
        | INT
                { $$ = DeclarationNode::newBasicType( DeclarationNode::Int ); }
        | INT128
                { $$ = DeclarationNode::newBasicType( DeclarationNode::Int128 ); }
        | FLOAT
                { $$ = DeclarationNode::newBasicType( DeclarationNode::Float ); }
        | FLOAT80
                { $$ = DeclarationNode::newBasicType( DeclarationNode::Float80 ); }
        | FLOAT128
                { $$ = DeclarationNode::newBasicType( DeclarationNode::Float128 ); }
        | DOUBLE
                { $$ = DeclarationNode::newBasicType( DeclarationNode::Double ); }
        | COMPLEX                                                                                       // C99
                { $$ = DeclarationNode::newComplexType( DeclarationNode::Complex ); }
        | IMAGINARY                                                                                     // C99
                { $$ = DeclarationNode::newComplexType( DeclarationNode::Imaginary ); }
        | SIGNED
                { $$ = DeclarationNode::newSignedNess( DeclarationNode::Signed ); }
        | UNSIGNED
                { $$ = DeclarationNode::newSignedNess( DeclarationNode::Unsigned ); }
        | SHORT
                { $$ = DeclarationNode::newLength( DeclarationNode::Short ); }
        | LONG
                { $$ = DeclarationNode::newLength( DeclarationNode::Long ); }
        | VALIST                                                                                        // GCC, __builtin_va_list
                { $$ = DeclarationNode::newBuiltinType( DeclarationNode::Valist ); }
        ;

basic_declaration_specifier:
                // A semantic check is necessary for conflicting storage classes.
        basic_type_specifier
        | declaration_qualifier_list basic_type_specifier
                { $$ = $2->addQualifiers( $1 ); }
        | basic_declaration_specifier storage_class                     // remaining OBSOLESCENT (see 2)
                { $$ = $1->addQualifiers( $2 ); }
        | basic_declaration_specifier storage_class type_qualifier_list
                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
        | basic_declaration_specifier storage_class basic_type_specifier
                { $$ = $3->addQualifiers( $2 )->addType( $1 ); }
        ;

basic_type_specifier:
        direct_type
                // Cannot have type modifiers, e.g., short, long, etc.
        | type_qualifier_list_opt indirect_type type_qualifier_list_opt
                { $$ = $2->addQualifiers( $1 )->addQualifiers( $3 ); }
        ;

direct_type:
        basic_type_name
        | type_qualifier_list basic_type_name
                { $$ = $2->addQualifiers( $1 ); }
        | direct_type type_qualifier
                { $$ = $1->addQualifiers( $2 ); }
        | direct_type basic_type_name
                { $$ = $1->addType( $2 ); }
        ;

indirect_type:
        TYPEOF '(' type ')'                                                                     // GCC: typeof(x) y;
                { $$ = $3; }
        | TYPEOF '(' comma_expression ')'                                       // GCC: typeof(a+b) y;
                { $$ = DeclarationNode::newTypeof( $3 ); }
        | ATTR_TYPEGENname '(' type ')'                                         // CFA: e.g., @type(x) y;
                { $$ = DeclarationNode::newAttr( $1, $3 ); }
        | ATTR_TYPEGENname '(' comma_expression ')'                     // CFA: e.g., @type(a+b) y;
                { $$ = DeclarationNode::newAttr( $1, $3 ); }
        | ZERO_T                                                                                        // CFA
                { $$ = DeclarationNode::newBuiltinType( DeclarationNode::Zero ); }
        | ONE_T                                                                                         // CFA
                { $$ = DeclarationNode::newBuiltinType( DeclarationNode::One ); }
        ;

sue_declaration_specifier:                                                              // struct, union, enum + storage class + type specifier
        sue_type_specifier
        | declaration_qualifier_list sue_type_specifier
                { $$ = $2->addQualifiers( $1 ); }
        | sue_declaration_specifier storage_class                       // remaining OBSOLESCENT (see 2)
                { $$ = $1->addQualifiers( $2 ); }
        | sue_declaration_specifier storage_class type_qualifier_list
                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
        ;

sue_type_specifier:                                                                             // struct, union, enum + type specifier
        elaborated_type
        | type_qualifier_list
                { if ( $1->type != nullptr && $1->type->forall ) forall = true; } // remember generic type
          elaborated_type
                { $$ = $3->addQualifiers( $1 ); }
        | sue_type_specifier type_qualifier
                { $$ = $1->addQualifiers( $2 ); }
        ;

sue_declaration_specifier_nobody:                                               // struct, union, enum - {...} + storage class + type specifier
        sue_type_specifier_nobody
        | declaration_qualifier_list sue_type_specifier_nobody
                { $$ = $2->addQualifiers( $1 ); }
        | sue_declaration_specifier_nobody storage_class        // remaining OBSOLESCENT (see 2)
                { $$ = $1->addQualifiers( $2 ); }
        | sue_declaration_specifier_nobody storage_class type_qualifier_list
                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
        ;

sue_type_specifier_nobody:                                                              // struct, union, enum - {...} + type specifier
        elaborated_type_nobody
        | type_qualifier_list elaborated_type_nobody
                { $$ = $2->addQualifiers( $1 ); }
        | sue_type_specifier_nobody type_qualifier
                { $$ = $1->addQualifiers( $2 ); }
        ;

type_declaration_specifier:
        type_type_specifier
        | declaration_qualifier_list type_type_specifier
                { $$ = $2->addQualifiers( $1 ); }
        | type_declaration_specifier storage_class                      // remaining OBSOLESCENT (see 2)
                { $$ = $1->addQualifiers( $2 ); }
        | type_declaration_specifier storage_class type_qualifier_list
                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
        ;

type_type_specifier:                                                                    // typedef types
        type_name
        | type_qualifier_list type_name
                { $$ = $2->addQualifiers( $1 ); }
        | type_type_specifier type_qualifier
                { $$ = $1->addQualifiers( $2 ); }
        ;

type_name:
        TYPEDEFname
                { $$ = DeclarationNode::newFromTypedef( $1 ); }
        | '.' TYPEDEFname
                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
        | type_name '.' TYPEDEFname
                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
        | typegen_name
        | '.' typegen_name
                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
        | type_name '.' typegen_name
                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
        ;

typegen_name:                                                                                   // CFA
        TYPEGENname
                { $$ = DeclarationNode::newFromTypeGen( $1, nullptr ); }
        | TYPEGENname '(' ')'
                { $$ = DeclarationNode::newFromTypeGen( $1, nullptr ); }
        | TYPEGENname '(' type_list ')'
                { $$ = DeclarationNode::newFromTypeGen( $1, $3 ); }
        ;

elaborated_type:                                                                                // struct, union, enum
        aggregate_type
        | enum_type
        ;

elaborated_type_nobody:                                                                 // struct, union, enum - {...}
        aggregate_type_nobody
        | enum_type_nobody
        ;

fred:
        // empty
                { yyy = false; }
        ;

aggregate_type:                                                                                 // struct, union
        aggregate_key attribute_list_opt '{' field_declaration_list_opt '}'
                { $$ = DeclarationNode::newAggregate( $1, new string( DeclarationNode::anonymous.newName() ), nullptr, $4, true )->addQualifiers( $2 ); }
        | aggregate_key attribute_list_opt no_attr_identifier fred
                {
                        typedefTable.makeTypedef( *$3, forall ? TYPEGENname : TYPEDEFname ); // create typedef
                        forall = false;                                                         // reset
                }
          '{' field_declaration_list_opt '}'
                { $$ = DeclarationNode::newAggregate( $1, $3, nullptr, $7, true )->addQualifiers( $2 ); }
        | aggregate_key attribute_list_opt type_name fred
                {
                        typedefTable.makeTypedef( *$3->type->symbolic.name, forall ? TYPEGENname : TYPEDEFname ); // create typedef
                        forall = false;                                                         // reset
                }
          '{' field_declaration_list_opt '}'
                { $$ = DeclarationNode::newAggregate( $1, $3->type->symbolic.name, nullptr, $7, true )->addQualifiers( $2 ); }
        | aggregate_key attribute_list_opt '(' type_list ')' '{' field_declaration_list_opt '}' // CFA
                { $$ = DeclarationNode::newAggregate( $1, new string( DeclarationNode::anonymous.newName() ), $4, $7, false )->addQualifiers( $2 ); }
        | aggregate_type_nobody
        ;

aggregate_type_nobody:                                                                  // struct, union - {...}
        aggregate_key attribute_list_opt no_attr_identifier fred
                {
                        typedefTable.makeTypedef( *$3, forall ? TYPEGENname : TYPEDEFname );
                        forall = false;                                                         // reset
                        $$ = DeclarationNode::newAggregate( $1, $3, nullptr, nullptr, false )->addQualifiers( $2 );
                }
        | aggregate_key attribute_list_opt type_name fred
                {
                        // Create new generic declaration with same name as previous forward declaration, where the IDENTIFIER is
                        // switched to a TYPEGENname. Link any generic arguments from typegen_name to new generic declaration and
                        // delete newFromTypeGen.
                        $$ = DeclarationNode::newAggregate( $1, $3->type->symbolic.name, $3->type->symbolic.actuals, nullptr, false )->addQualifiers( $2 );
                        $3->type->symbolic.name = nullptr;
                        $3->type->symbolic.actuals = nullptr;
                        delete $3;
                }
        ;

aggregate_key:
        STRUCT
                { yyy = true; $$ = DeclarationNode::Struct; }
        | UNION
                { yyy = true; $$ = DeclarationNode::Union; }
        | EXCEPTION
                { yyy = true; $$ = DeclarationNode::Exception; }
        | COROUTINE
                { yyy = true; $$ = DeclarationNode::Coroutine; }
        | MONITOR
                { yyy = true; $$ = DeclarationNode::Monitor; }
        | THREAD
                { yyy = true; $$ = DeclarationNode::Thread; }
        ;

field_declaration_list_opt:
        // empty
                { $$ = nullptr; }
        | field_declaration_list_opt field_declaration
                { $$ = $1 ? $1->appendList( $2 ) : $2; }
        ;

field_declaration:
        type_specifier field_declaring_list ';'
                { $$ = distAttr( $1, $2 ); }
        | EXTENSION type_specifier field_declaring_list ';'     // GCC
                { distExt( $3 ); $$ = distAttr( $2, $3 ); }             // mark all fields in list
        | typedef_declaration ';'                                                       // CFA
                { SemanticError( yylloc, "Typedef in aggregate is currently unimplemented." ); $$ = nullptr; }
        | cfa_field_declaring_list ';'                                          // CFA, new style field declaration
        | EXTENSION cfa_field_declaring_list ';'                        // GCC
                { distExt( $2 ); $$ = $2; }                                             // mark all fields in list
        | cfa_typedef_declaration ';'                                           // CFA
                { SemanticError( yylloc, "Typedef in aggregate is currently unimplemented." ); $$ = nullptr; }
        | static_assert                                                                         // C11
        ;

cfa_field_declaring_list:                                                               // CFA, new style field declaration
        cfa_abstract_declarator_tuple                                           // CFA, no field name
        | cfa_abstract_declarator_tuple no_attr_identifier_or_type_name
                { $$ = $1->addName( $2 ); }
        | cfa_field_declaring_list ',' no_attr_identifier_or_type_name
                { $$ = $1->appendList( $1->cloneType( $3 ) ); }
        | cfa_field_declaring_list ','                                          // CFA, no field name
                { $$ = $1->appendList( $1->cloneType( 0 ) ); }
        ;

field_declaring_list:
        field_declarator_opt
        | field_declaring_list ',' attribute_list_opt field_declarator_opt
                { $$ = $1->appendList( $4->addQualifiers( $3 ) ); }
        ;

field_declarator_opt:
        // empty
                { $$ = DeclarationNode::newName( 0 ); /* XXX */ } // CFA, no field name
        // '@'
        //      { $$ = DeclarationNode::newName( new string( DeclarationNode::anonymous.newName() ) ); } // CFA, no field name
        | bit_subrange_size                                                                     // no field name
                { $$ = DeclarationNode::newBitfield( $1 ); }
        | variable_declarator bit_subrange_size_opt
                // A semantic check is required to ensure bit_subrange only appears on base type int.
                { $$ = $1->addBitfield( $2 ); }
        | variable_type_redeclarator bit_subrange_size_opt
                // A semantic check is required to ensure bit_subrange only appears on base type int.
                { $$ = $1->addBitfield( $2 ); }
        | variable_abstract_declarator                                          // CFA, no field name
        ;

bit_subrange_size_opt:
        // empty
                { $$ = nullptr; }
        | bit_subrange_size
        ;

bit_subrange_size:
        ':' constant_expression
                { $$ = $2; }
        ;

enum_type:                                                                                              // enum
        ENUM attribute_list_opt '{' enumerator_list comma_opt '}'
                { $$ = DeclarationNode::newEnum( new string( DeclarationNode::anonymous.newName() ), $4, true )->addQualifiers( $2 ); }
        | ENUM attribute_list_opt no_attr_identifier
                { typedefTable.makeTypedef( *$3 ); }
          '{' enumerator_list comma_opt '}'
                { $$ = DeclarationNode::newEnum( $3, $6, true )->addQualifiers( $2 ); }
        | ENUM attribute_list_opt type_name
          '{' enumerator_list comma_opt '}'
                { $$ = DeclarationNode::newEnum( $3->type->symbolic.name, $5, true )->addQualifiers( $2 ); }
        | enum_type_nobody
        ;

enum_type_nobody:                                                                               // enum - {...}
        ENUM attribute_list_opt no_attr_identifier
                {
                        typedefTable.makeTypedef( *$3 );
                        $$ = DeclarationNode::newEnum( $3, 0, false )->addQualifiers( $2 );
                }
        | ENUM attribute_list_opt type_name
                {
                        typedefTable.makeTypedef( *$3->type->symbolic.name );
                        $$ = DeclarationNode::newEnum( $3->type->symbolic.name, 0, false )->addQualifiers( $2 );
                }
        ;

enumerator_list:
        no_attr_identifier_or_type_name enumerator_value_opt
                { $$ = DeclarationNode::newEnumConstant( $1, $2 ); }
        | enumerator_list ',' no_attr_identifier_or_type_name enumerator_value_opt
                { $$ = $1->appendList( DeclarationNode::newEnumConstant( $3, $4 ) ); }
        ;

enumerator_value_opt:
        // empty
                { $$ = nullptr; }
        | '=' constant_expression
                { $$ = $2; }
        ;

cfa_parameter_ellipsis_list_opt:                                                        // CFA, abstract + real
        // empty
                { $$ = DeclarationNode::newBasicType( DeclarationNode::Void ); }
        | ELLIPSIS
                { $$ = nullptr; }
        | cfa_abstract_parameter_list
        | cfa_parameter_list
        | cfa_parameter_list pop ',' push cfa_abstract_parameter_list
                { $$ = $1->appendList( $5 ); }
        | cfa_abstract_parameter_list pop ',' push ELLIPSIS
                { $$ = $1->addVarArgs(); }
        | cfa_parameter_list pop ',' push ELLIPSIS
                { $$ = $1->addVarArgs(); }
        ;

cfa_parameter_list:                                                                             // CFA
                // To obtain LR(1) between cfa_parameter_list and cfa_abstract_tuple, the last cfa_abstract_parameter_list is
                // factored out from cfa_parameter_list, flattening the rules to get lookahead to the ']'.
        cfa_parameter_declaration
        | cfa_abstract_parameter_list pop ',' push cfa_parameter_declaration
                { $$ = $1->appendList( $5 ); }
        | cfa_parameter_list pop ',' push cfa_parameter_declaration
                { $$ = $1->appendList( $5 ); }
        | cfa_parameter_list pop ',' push cfa_abstract_parameter_list pop ',' push cfa_parameter_declaration
                { $$ = $1->appendList( $5 )->appendList( $9 ); }
        ;

cfa_abstract_parameter_list:                                                    // CFA, new & old style abstract
        cfa_abstract_parameter_declaration
        | cfa_abstract_parameter_list pop ',' push cfa_abstract_parameter_declaration
                { $$ = $1->appendList( $5 ); }
        ;

parameter_type_list_opt:
        // empty
                { $$ = nullptr; }
        | ELLIPSIS
                { $$ = nullptr; }
        | parameter_list
        | parameter_list pop ',' push ELLIPSIS
                { $$ = $1->addVarArgs(); }
        ;

parameter_list:                                                                                 // abstract + real
        abstract_parameter_declaration
        | parameter_declaration
        | parameter_list pop ',' push abstract_parameter_declaration
                { $$ = $1->appendList( $5 ); }
        | parameter_list pop ',' push parameter_declaration
                { $$ = $1->appendList( $5 ); }
        ;

// Provides optional identifier names (abstract_declarator/variable_declarator), no initialization, different semantics
// for typedef name by using type_parameter_redeclarator instead of typedef_redeclarator, and function prototypes.

cfa_parameter_declaration:                                                              // CFA, new & old style parameter declaration
        parameter_declaration
        | cfa_identifier_parameter_declarator_no_tuple identifier_or_type_name default_initialize_opt
                { $$ = $1->addName( $2 ); }
        | cfa_abstract_tuple identifier_or_type_name default_initialize_opt
                // To obtain LR(1), these rules must be duplicated here (see cfa_abstract_declarator).
                { $$ = $1->addName( $2 ); }
        | type_qualifier_list cfa_abstract_tuple identifier_or_type_name default_initialize_opt
                { $$ = $2->addName( $3 )->addQualifiers( $1 ); }
        | cfa_function_specifier
        ;

cfa_abstract_parameter_declaration:                                             // CFA, new & old style parameter declaration
        abstract_parameter_declaration
        | cfa_identifier_parameter_declarator_no_tuple
        | cfa_abstract_tuple
                // To obtain LR(1), these rules must be duplicated here (see cfa_abstract_declarator).
        | type_qualifier_list cfa_abstract_tuple
                { $$ = $2->addQualifiers( $1 ); }
        | cfa_abstract_function
        ;

parameter_declaration:
                // No SUE declaration in parameter list.
        declaration_specifier_nobody identifier_parameter_declarator default_initialize_opt
                { $$ = $2->addType( $1 )->addInitializer( $3 ? new InitializerNode( $3 ) : nullptr ); }
        | declaration_specifier_nobody type_parameter_redeclarator default_initialize_opt
                { $$ = $2->addType( $1 )->addInitializer( $3 ? new InitializerNode( $3 ) : nullptr ); }
        ;

abstract_parameter_declaration:
        declaration_specifier_nobody default_initialize_opt
                { $$ = $1->addInitializer( $2 ? new InitializerNode( $2 ) : nullptr ); }
        | declaration_specifier_nobody abstract_parameter_declarator default_initialize_opt
                { $$ = $2->addType( $1 )->addInitializer( $3 ? new InitializerNode( $3 ) : nullptr ); }
        ;

// ISO/IEC 9899:1999 Section 6.9.1(6) : "An identifier declared as a typedef name shall not be redeclared as a
// parameter." Because the scope of the K&R-style parameter-list sees the typedef first, the following is based only on
// identifiers.  The ANSI-style parameter-list can redefine a typedef name.

identifier_list:                                                                                // K&R-style parameter list => no types
        no_attr_identifier
                { $$ = DeclarationNode::newName( $1 ); }
        | identifier_list ',' no_attr_identifier
                { $$ = $1->appendList( DeclarationNode::newName( $3 ) ); }
        ;

identifier_or_type_name:
        identifier
        | TYPEDEFname
        | TYPEGENname
        ;

no_attr_identifier_or_type_name:
        no_attr_identifier
        | TYPEDEFname
        | TYPEGENname
        ;

type_no_function:                                                                               // sizeof, alignof, cast (constructor)
        cfa_abstract_declarator_tuple                                           // CFA
        | type_specifier
        | type_specifier abstract_declarator
                { $$ = $2->addType( $1 ); }
        ;

type:                                                                                                   // typeof, assertion
        type_no_function
        | cfa_abstract_function                                                         // CFA
        ;

initializer_opt:
        // empty
                { $$ = nullptr; }
        | '=' initializer
                { $$ = $2; }
        | '=' VOID
                { $$ = new InitializerNode( true ); }
        | ATassign initializer
                { $$ = $2->set_maybeConstructed( false ); }
        ;

initializer:
        assignment_expression                                           { $$ = new InitializerNode( $1 ); }
        | '{' initializer_list_opt comma_opt '}'        { $$ = new InitializerNode( $2, true ); }
        ;

initializer_list_opt:
        // empty
                { $$ = nullptr; }
        | initializer
        | designation initializer                                       { $$ = $2->set_designators( $1 ); }
        | initializer_list_opt ',' initializer          { $$ = (InitializerNode *)( $1->set_last( $3 ) ); }
        | initializer_list_opt ',' designation initializer
                { $$ = (InitializerNode *)( $1->set_last( $4->set_designators( $3 ) ) ); }
        ;

// There is an unreconcileable parsing problem between C99 and CFA with respect to designators. The problem is use of
// '=' to separator the designator from the initializer value, as in:
//
//              int x[10] = { [1] = 3 };
//
// The string "[1] = 3" can be parsed as a designator assignment or a tuple assignment.  To disambiguate this case, CFA
// changes the syntax from "=" to ":" as the separator between the designator and initializer. GCC does uses ":" for
// field selection. The optional use of the "=" in GCC, or in this case ":", cannot be supported either due to
// shift/reduce conflicts

designation:
        designator_list ':'                                                                     // C99, CFA uses ":" instead of "="
        | no_attr_identifier ':'                                                        // GCC, field name
                { $$ = new ExpressionNode( build_varref( $1 ) ); }
        ;

designator_list:                                                                                // C99
        designator
        | designator_list designator
                { $$ = (ExpressionNode *)( $1->set_last( $2 ) ); }
        //| designator_list designator                                          { $$ = new ExpressionNode( $1, $2 ); }
        ;

designator:
        '.' no_attr_identifier                                                          // C99, field name
                { $$ = new ExpressionNode( build_varref( $2 ) ); }
        | '[' push assignment_expression pop ']'                        // C99, single array element
                // assignment_expression used instead of constant_expression because of shift/reduce conflicts with tuple.
                { $$ = $3; }
        | '[' push subrange pop ']'                                                     // CFA, multiple array elements
                { $$ = $3; }
        | '[' push constant_expression ELLIPSIS constant_expression pop ']' // GCC, multiple array elements
                { $$ = new ExpressionNode( new RangeExpr( maybeMoveBuild< Expression >( $3 ), maybeMoveBuild< Expression >( $5 ) ) ); }
        | '.' '[' push field_list pop ']'                                       // CFA, tuple field selector
                { $$ = $4; }
        ;

// The CFA type system is based on parametric polymorphism, the ability to declare functions with type parameters,
// rather than an object-oriented type system. This required four groups of extensions:
//
// Overloading: function, data, and operator identifiers may be overloaded.
//
// Type declarations: "type" is used to generate new types for declaring objects. Similarly, "dtype" is used for object
//     and incomplete types, and "ftype" is used for function types. Type declarations with initializers provide
//     definitions of new types. Type declarations with storage class "extern" provide opaque types.
//
// Polymorphic functions: A forall clause declares a type parameter. The corresponding argument is inferred at the call
//     site. A polymorphic function is not a template; it is a function, with an address and a type.
//
// Specifications and Assertions: Specifications are collections of declarations parameterized by one or more
//     types. They serve many of the purposes of abstract classes, and specification hierarchies resemble subclass
//     hierarchies. Unlike classes, they can define relationships between types.  Assertions declare that a type or
//     types provide the operations declared by a specification.  Assertions are normally used to declare requirements
//     on type arguments of polymorphic functions.

type_parameter_list:                                                                    // CFA
        type_parameter
        | type_parameter_list ',' type_parameter
                { $$ = $1->appendList( $3 ); }
        ;

type_initializer_opt:                                                                   // CFA
        // empty
                { $$ = nullptr; }
        | '=' type
                { $$ = $2; }
        ;

type_parameter:                                                                                 // CFA
        type_class no_attr_identifier_or_type_name
                { typedefTable.addToScope( *$2, TYPEDEFname, "9" ); }
          type_initializer_opt assertion_list_opt
                { $$ = DeclarationNode::newTypeParam( $1, $2 )->addTypeInitializer( $4 )->addAssertions( $5 ); }
        | type_specifier identifier_parameter_declarator
        | assertion_list
                { $$ = DeclarationNode::newTypeParam( DeclarationNode::Dtype, new string( DeclarationNode::anonymous.newName() ) )->addAssertions( $1 ); }
        ;

type_class:                                                                                             // CFA
        OTYPE
                { $$ = DeclarationNode::Otype; }
        | DTYPE
                { $$ = DeclarationNode::Dtype; }
        | FTYPE
                { $$ = DeclarationNode::Ftype; }
        | TTYPE
                { $$ = DeclarationNode::Ttype; }
        ;

assertion_list_opt:                                                                             // CFA
        // empty
                { $$ = nullptr; }
        | assertion_list
        ;

assertion_list:                                                                                 // CFA
        assertion
        | assertion_list assertion
                { $$ = $1 ? $1->appendList( $2 ) : $2; }
        ;

assertion:                                                                                              // CFA
        '|' no_attr_identifier_or_type_name '(' type_list ')'
                { $$ = DeclarationNode::newTraitUse( $2, $4 ); }
        | '|' '{' push trait_declaration_list pop '}'
                { $$ = $4; }
        // | '|' '(' push type_parameter_list pop ')' '{' push trait_declaration_list pop '}' '(' type_list ')'
        //      { SemanticError( yylloc, "Generic data-type assertion is currently unimplemented." ); $$ = nullptr; }
        ;

type_list:                                                                                              // CFA
        type
                { $$ = new ExpressionNode( new TypeExpr( maybeMoveBuildType( $1 ) ) ); }
        | assignment_expression
        | type_list ',' type
                { $$ = (ExpressionNode *)( $1->set_last( new ExpressionNode( new TypeExpr( maybeMoveBuildType( $3 ) ) ) ) ); }
        | type_list ',' assignment_expression
                { $$ = (ExpressionNode *)( $1->set_last( $3 )); }
        ;

type_declaring_list:                                                                    // CFA
        OTYPE type_declarator
                { $$ = $2; }
        | storage_class_list OTYPE type_declarator
                { $$ = $3->addQualifiers( $1 ); }
        | type_declaring_list ',' type_declarator
                { $$ = $1->appendList( $3->copySpecifiers( $1 ) ); }
        ;

type_declarator:                                                                                // CFA
        type_declarator_name assertion_list_opt
                { $$ = $1->addAssertions( $2 ); }
        | type_declarator_name assertion_list_opt '=' type
                { $$ = $1->addAssertions( $2 )->addType( $4 ); }
        ;

type_declarator_name:                                                                   // CFA
        no_attr_identifier_or_type_name
                {
                        typedefTable.addToEnclosingScope( *$1, TYPEDEFname, "10" );
                        $$ = DeclarationNode::newTypeDecl( $1, 0 );
                }
        | no_attr_identifier_or_type_name '(' type_parameter_list ')'
                {
                        typedefTable.addToEnclosingScope( *$1, TYPEGENname, "11" );
                        $$ = DeclarationNode::newTypeDecl( $1, $3 );
                }
        ;

trait_specifier:                                                                                // CFA
        TRAIT no_attr_identifier_or_type_name '(' type_parameter_list ')' '{' '}'
                { $$ = DeclarationNode::newTrait( $2, $4, 0 ); }
        | TRAIT no_attr_identifier_or_type_name '(' type_parameter_list ')' '{' push trait_declaration_list pop '}'
                { $$ = DeclarationNode::newTrait( $2, $4, $8 ); }
        ;

trait_declaration_list:                                                                 // CFA
        trait_declaration
        | trait_declaration_list pop push trait_declaration
                { $$ = $1->appendList( $4 ); }
        ;

trait_declaration:                                                                              // CFA
        cfa_trait_declaring_list ';'
        | trait_declaring_list ';'
        ;

cfa_trait_declaring_list:                                                               // CFA
        cfa_variable_specifier
        | cfa_function_specifier
        | cfa_trait_declaring_list pop ',' push identifier_or_type_name
                { $$ = $1->appendList( $1->cloneType( $5 ) ); }
        ;

trait_declaring_list:                                                                   // CFA
        type_specifier declarator
                { $$ = $2->addType( $1 ); }
        | trait_declaring_list pop ',' push declarator
                { $$ = $1->appendList( $1->cloneBaseType( $5 ) ); }
        ;

//***************************** EXTERNAL DEFINITIONS *****************************

translation_unit:
        // empty, input file
        | external_definition_list
                { parseTree = parseTree ? parseTree->appendList( $1 ) : $1;     }
        ;

external_definition_list:
        push external_definition pop
                { $$ = $2; }
        | external_definition_list
                { forall = xxx; }
          push external_definition pop
                { $$ = $1 ? $1->appendList( $4 ) : $4; }
        ;

external_definition_list_opt:
        // empty
                { $$ = nullptr; }
        | external_definition_list
        ;

up:
                { typedefTable.up(); }
        ;

down:
                { typedefTable.down(); }
        ;

external_definition:
        declaration
        | external_function_definition
        | EXTENSION external_definition                                         // GCC, multiple __extension__ allowed, meaning unknown
                {
                        distExt( $2 );                                                          // mark all fields in list
                        $$ = $2;
                }
        | ASM '(' string_literal ')' ';'                                        // GCC, global assembler statement
                {
                        $$ = DeclarationNode::newAsmStmt( new StatementNode( build_asm( false, $3, 0 ) ) );
                }
        | EXTERN STRINGliteral                                                          // C++-style linkage specifier
                {
                        linkageStack.push( linkage );                           // handle nested extern "C"/"Cforall"
                        linkage = LinkageSpec::linkageUpdate( yylloc, linkage, $2 );
                }
          '{' up external_definition_list_opt down '}'
                {
                        linkage = linkageStack.top();
                        linkageStack.pop();
                        $$ = $6;
                }
        | type_qualifier_list
                {
                        if ( $1->type->qualifiers.val ) { SemanticError( yylloc, "CV qualifiers cannot be distributed; only storage-class and forall qualifiers." ); }
                        if ( $1->type->forall ) xxx = forall = true; // remember generic type
                }
          '{' up external_definition_list_opt down '}'          // CFA, namespace
                {
                        for ( DeclarationNode * iter = $5; iter != nullptr; iter = (DeclarationNode *)iter->get_next() ) {
                                if ( isMangled( iter->linkage ) ) {             // ignore extern "C"
                                        iter->addQualifiers( $1->clone() );
                                } // if
                        } // for
                        xxx = false;
                        delete $1;
                        $$ = $5;
                }
        | declaration_qualifier_list
                {
                        if ( $1->type->qualifiers.val ) { SemanticError( yylloc, "CV qualifiers cannot be distributed; only storage-class and forall qualifiers." ); }
                        if ( $1->type->forall ) xxx = forall = true; // remember generic type
                }
          '{' up external_definition_list_opt down '}'          // CFA, namespace
                {
                        for ( DeclarationNode * iter = $5; iter != nullptr; iter = (DeclarationNode *)iter->get_next() ) {
                                if ( isMangled( iter->linkage ) ) {             // ignore extern "C"
                                        iter->addQualifiers( $1->clone() );
                                } // if
                        } // for
                        xxx = false;
                        delete $1;
                        $$ = $5;
                }
        | declaration_qualifier_list type_qualifier_list
                {
                        if ( ($1->type && $1->type->qualifiers.val) || $2->type->qualifiers.val ) { SemanticError( yylloc, "CV qualifiers cannot be distributed; only storage-class and forall qualifiers." ); }
                        if ( ($1->type && $1->type->forall) || $2->type->forall ) xxx = forall = true; // remember generic type
                }
          '{' up external_definition_list_opt down '}'          // CFA, namespace
                {
                        for ( DeclarationNode * iter = $6; iter != nullptr; iter = (DeclarationNode *)iter->get_next() ) {
                                if ( isMangled( iter->linkage ) && isMangled( $2->linkage ) ) { // ignore extern "C"
                                        iter->addQualifiers( $1->clone() );
                                        iter->addQualifiers( $2->clone() );
                                } // if
                        } // for
                        xxx = false;
                        delete $1;
                        delete $2;
                        $$ = $6;
                }
        ;

external_function_definition:
        function_definition
                // These rules are a concession to the "implicit int" type_specifier because there is a significant amount of
                // legacy code with global functions missing the type-specifier for the return type, and assuming "int".
                // Parsing is possible because function_definition does not appear in the context of an expression (nested
                // functions preclude this concession, i.e., all nested function must have a return type). A function prototype
                // declaration must still have a type_specifier.  OBSOLESCENT (see 1)
        | function_declarator compound_statement
                { $$ = $1->addFunctionBody( $2 ); }
        | KR_function_declarator KR_parameter_list_opt compound_statement
                { $$ = $1->addOldDeclList( $2 )->addFunctionBody( $3 ); }
        ;

with_clause_opt:
        // empty
                { $$ = nullptr; forall = false; }
        | WITH '(' tuple_expression_list ')'
                { $$ = $3; forall = false; }
        ;

function_definition:
        cfa_function_declaration with_clause_opt compound_statement     // CFA
                {
                        // Add the function body to the last identifier in the function definition list, i.e., foo3:
                        //   [const double] foo1(), foo2( int ), foo3( double ) { return 3.0; }
                        $1->get_last()->addFunctionBody( $3, $2 );
                        $$ = $1;
                }
        | declaration_specifier function_declarator with_clause_opt compound_statement
                {
                        rebindForall( $1, $2 );
                        $$ = $2->addFunctionBody( $4, $3 )->addType( $1 );
                }
        | declaration_specifier variable_type_redeclarator with_clause_opt compound_statement
                {
                        rebindForall( $1, $2 );
                        $$ = $2->addFunctionBody( $4, $3 )->addType( $1 );
                }
                // handles default int return type, OBSOLESCENT (see 1)
        | type_qualifier_list function_declarator with_clause_opt compound_statement
                { $$ = $2->addFunctionBody( $4, $3 )->addQualifiers( $1 ); }
                // handles default int return type, OBSOLESCENT (see 1)
        | declaration_qualifier_list function_declarator with_clause_opt compound_statement
                { $$ = $2->addFunctionBody( $4, $3 )->addQualifiers( $1 ); }
                // handles default int return type, OBSOLESCENT (see 1)
        | declaration_qualifier_list type_qualifier_list function_declarator with_clause_opt compound_statement
                { $$ = $3->addFunctionBody( $5, $4 )->addQualifiers( $2 )->addQualifiers( $1 ); }

                // Old-style K&R function definition, OBSOLESCENT (see 4)
        | declaration_specifier KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
                {
                        rebindForall( $1, $2 );
                        $$ = $2->addOldDeclList( $3 )->addFunctionBody( $5, $4 )->addType( $1 );
                }
                // handles default int return type, OBSOLESCENT (see 1)
        | type_qualifier_list KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
                { $$ = $2->addOldDeclList( $3 )->addFunctionBody( $5, $4 )->addQualifiers( $1 ); }
                // handles default int return type, OBSOLESCENT (see 1)
        | declaration_qualifier_list KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
                { $$ = $2->addOldDeclList( $3 )->addFunctionBody( $5, $4 )->addQualifiers( $1 ); }
                // handles default int return type, OBSOLESCENT (see 1)
        | declaration_qualifier_list type_qualifier_list KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
                { $$ = $3->addOldDeclList( $4 )->addFunctionBody( $6, $5 )->addQualifiers( $2 )->addQualifiers( $1 ); }
        ;

declarator:
        variable_declarator
        | variable_type_redeclarator
        | function_declarator
        ;

subrange:
        constant_expression '~' constant_expression                     // CFA, integer subrange
                { $$ = new ExpressionNode( new RangeExpr( maybeMoveBuild< Expression >( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
        ;

asm_name_opt:                                                                                   // GCC
        // empty
                { $$ = nullptr; }
        | ASM '(' string_literal ')' attribute_list_opt
                {
                        DeclarationNode * name = new DeclarationNode();
                        name->asmName = $3;
                        $$ = name->addQualifiers( $5 );
                }
        ;

attribute_list_opt:                                                                             // GCC
        // empty
                { $$ = nullptr; }
        | attribute_list
        ;

attribute_list:                                                                                 // GCC
        attribute
        | attribute_list attribute
                { $$ = $2->addQualifiers( $1 ); }
        ;

attribute:                                                                                              // GCC
        ATTRIBUTE '(' '(' attribute_name_list ')' ')'
                { $$ = $4; }
        ;

attribute_name_list:                                                                    // GCC
        attribute_name
        | attribute_name_list ',' attribute_name
                { $$ = $3->addQualifiers( $1 ); }
        ;

attribute_name:                                                                                 // GCC
        // empty
                { $$ = nullptr; }
        | attr_name
                { $$ = DeclarationNode::newAttribute( $1 ); }
        | attr_name '(' argument_expression_list ')'
                { $$ = DeclarationNode::newAttribute( $1, $3 ); }
        ;

attr_name:                                                                                              // GCC
        IDENTIFIER
        | quasi_keyword
        | TYPEDEFname
        | TYPEGENname
        | FALLTHROUGH
                { $$ = Token{ new string( "fallthrough" ), { nullptr, -1 } }; }
        | CONST
                { $$ = Token{ new string( "__const__" ), { nullptr, -1 } }; }
        ;

// ============================================================================
// The following sections are a series of grammar patterns used to parse declarators. Multiple patterns are necessary
// because the type of an identifier in wrapped around the identifier in the same form as its usage in an expression, as
// in:
//
//              int (*f())[10] { ... };
//              ... (*f())[3] += 1;             // definition mimics usage
//
// Because these patterns are highly recursive, changes at a lower level in the recursion require copying some or all of
// the pattern. Each of these patterns has some subtle variation to ensure correct syntax in a particular context.
// ============================================================================

// ----------------------------------------------------------------------------
// The set of valid declarators before a compound statement for defining a function is less than the set of declarators
// to define a variable or function prototype, e.g.:
//
//              valid declaration               invalid definition
//              -----------------               ------------------
//              int f;                                  int f {}
//              int *f;                                 int *f {}
//              int f[10];                              int f[10] {}
//              int (*f)(int);                  int (*f)(int) {}
//
// To preclude this syntactic anomaly requires separating the grammar rules for variable and function declarators, hence
// variable_declarator and function_declarator.
// ----------------------------------------------------------------------------

// This pattern parses a declaration of a variable that is not redefining a typedef name. The pattern precludes
// declaring an array of functions versus a pointer to an array of functions.

variable_declarator:
        paren_identifier attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | variable_ptr
        | variable_array attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | variable_function attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        ;

paren_identifier:
        identifier
                { $$ = DeclarationNode::newName( $1 ); }
        | '(' paren_identifier ')'                                                      // redundant parenthesis
                { $$ = $2; }
        ;

variable_ptr:
        ptrref_operator variable_declarator
                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | ptrref_operator type_qualifier_list variable_declarator
                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
        | '(' variable_ptr ')' attribute_list_opt
                { $$ = $2->addQualifiers( $4 ); }                               // redundant parenthesis
        ;

variable_array:
        paren_identifier array_dimension
                { $$ = $1->addArray( $2 ); }
        | '(' variable_ptr ')' array_dimension
                { $$ = $2->addArray( $4 ); }
        | '(' variable_array ')' multi_array_dimension          // redundant parenthesis
                { $$ = $2->addArray( $4 ); }
        | '(' variable_array ')'                                                        // redundant parenthesis
                { $$ = $2; }
        ;

variable_function:
        '(' variable_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
                { $$ = $2->addParamList( $6 ); }
        | '(' variable_function ')'                                                     // redundant parenthesis
                { $$ = $2; }
        ;

// This pattern parses a function declarator that is not redefining a typedef name. For non-nested functions, there is
// no context where a function definition can redefine a typedef name, i.e., the typedef and function name cannot exist
// is the same scope.  The pattern precludes returning arrays and functions versus pointers to arrays and functions.

function_declarator:
        function_no_ptr attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | function_ptr
        | function_array attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        ;

function_no_ptr:
        paren_identifier '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
                { $$ = $1->addParamList( $4 ); }
        | '(' function_ptr ')' '(' push parameter_type_list_opt pop ')'
                { $$ = $2->addParamList( $6 ); }
        | '(' function_no_ptr ')'                                                       // redundant parenthesis
                { $$ = $2; }
        ;

function_ptr:
        ptrref_operator function_declarator
                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | ptrref_operator type_qualifier_list function_declarator
                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
        | '(' function_ptr ')'
                { $$ = $2; }
        ;

function_array:
        '(' function_ptr ')' array_dimension
                { $$ = $2->addArray( $4 ); }
        | '(' function_array ')' multi_array_dimension          // redundant parenthesis
                { $$ = $2->addArray( $4 ); }
        | '(' function_array ')'                                                        // redundant parenthesis
                { $$ = $2; }
        ;

// This pattern parses an old-style K&R function declarator (OBSOLESCENT, see 4)
//
//   f( a, b, c ) int a, *b, c[]; {}
//
// that is not redefining a typedef name (see function_declarator for additional comments). The pattern precludes
// returning arrays and functions versus pointers to arrays and functions.

KR_function_declarator:
        KR_function_no_ptr
        | KR_function_ptr
        | KR_function_array
        ;

KR_function_no_ptr:
        paren_identifier '(' identifier_list ')'                        // function_declarator handles empty parameter
                { $$ = $1->addIdList( $3 ); }
        | '(' KR_function_ptr ')' '(' push parameter_type_list_opt pop ')'
                { $$ = $2->addParamList( $6 ); }
        | '(' KR_function_no_ptr ')'                                            // redundant parenthesis
                { $$ = $2; }
        ;

KR_function_ptr:
        ptrref_operator KR_function_declarator
                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | ptrref_operator type_qualifier_list KR_function_declarator
                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
        | '(' KR_function_ptr ')'
                { $$ = $2; }
        ;

KR_function_array:
        '(' KR_function_ptr ')' array_dimension
                { $$ = $2->addArray( $4 ); }
        | '(' KR_function_array ')' multi_array_dimension       // redundant parenthesis
                { $$ = $2->addArray( $4 ); }
        | '(' KR_function_array ')'                                                     // redundant parenthesis
                { $$ = $2; }
        ;

// This pattern parses a declaration for a variable or function prototype that redefines a type name, e.g.:
//
//              typedef int foo;
//              {
//                 int foo; // redefine typedef name in new scope
//              }
//
// The pattern precludes declaring an array of functions versus a pointer to an array of functions, and returning arrays
// and functions versus pointers to arrays and functions.

variable_type_redeclarator:
        paren_type attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | type_ptr
        | type_array attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | type_function attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        ;

paren_type:
        typedef
                // hide type name in enclosing scope by variable name
                { typedefTable.addToEnclosingScope( *$1->name, IDENTIFIER, "ID" ); }
        | '(' paren_type ')'
                { $$ = $2; }
        ;

type_ptr:
        ptrref_operator variable_type_redeclarator
                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | ptrref_operator type_qualifier_list variable_type_redeclarator
                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
        | '(' type_ptr ')' attribute_list_opt
                { $$ = $2->addQualifiers( $4 ); }
        ;

type_array:
        paren_type array_dimension
                { $$ = $1->addArray( $2 ); }
        | '(' type_ptr ')' array_dimension
                { $$ = $2->addArray( $4 ); }
        | '(' type_array ')' multi_array_dimension                      // redundant parenthesis
                { $$ = $2->addArray( $4 ); }
        | '(' type_array ')'                                                            // redundant parenthesis
                { $$ = $2; }
        ;

type_function:
        paren_type '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
                { $$ = $1->addParamList( $4 ); }
        | '(' type_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
                { $$ = $2->addParamList( $6 ); }
        | '(' type_function ')'                                                         // redundant parenthesis
                { $$ = $2; }
        ;

// This pattern parses a declaration for a parameter variable of a function prototype or actual that is not redefining a
// typedef name and allows the C99 array options, which can only appear in a parameter list.  The pattern precludes
// declaring an array of functions versus a pointer to an array of functions, and returning arrays and functions versus
// pointers to arrays and functions.

identifier_parameter_declarator:
        paren_identifier attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | '&' MUTEX paren_identifier attribute_list_opt
                { $$ = $3->addPointer( DeclarationNode::newPointer( DeclarationNode::newTypeQualifier( Type::Mutex ), OperKinds::AddressOf ) )->addQualifiers( $4 ); }
        | identifier_parameter_ptr
        | identifier_parameter_array attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | identifier_parameter_function attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        ;

identifier_parameter_ptr:
        ptrref_operator identifier_parameter_declarator
                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | ptrref_operator type_qualifier_list identifier_parameter_declarator
                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
        | '(' identifier_parameter_ptr ')' attribute_list_opt
                { $$ = $2->addQualifiers( $4 ); }
        ;

identifier_parameter_array:
        paren_identifier array_parameter_dimension
                { $$ = $1->addArray( $2 ); }
        | '(' identifier_parameter_ptr ')' array_dimension
                { $$ = $2->addArray( $4 ); }
        | '(' identifier_parameter_array ')' multi_array_dimension // redundant parenthesis
                { $$ = $2->addArray( $4 ); }
        | '(' identifier_parameter_array ')'                            // redundant parenthesis
                { $$ = $2; }
        ;

identifier_parameter_function:
        paren_identifier '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
                { $$ = $1->addParamList( $4 ); }
        | '(' identifier_parameter_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
                { $$ = $2->addParamList( $6 ); }
        | '(' identifier_parameter_function ')'                         // redundant parenthesis
                { $$ = $2; }
        ;

// This pattern parses a declaration for a parameter variable or function prototype that is redefining a typedef name,
// e.g.:
//
//              typedef int foo;
//              forall( otype T ) struct foo;
//              int f( int foo ); // redefine typedef name in new scope
//
// and allows the C99 array options, which can only appear in a parameter list.

type_parameter_redeclarator:
        typedef attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | '&' MUTEX typedef attribute_list_opt
                { $$ = $3->addPointer( DeclarationNode::newPointer( DeclarationNode::newTypeQualifier( Type::Mutex ), OperKinds::AddressOf ) )->addQualifiers( $4 ); }
        | type_parameter_ptr
        | type_parameter_array attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | type_parameter_function attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        ;

typedef:
        TYPEDEFname
                { $$ = DeclarationNode::newName( $1 ); }
        | TYPEGENname
                { $$ = DeclarationNode::newName( $1 ); }
        ;

type_parameter_ptr:
        ptrref_operator type_parameter_redeclarator
                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | ptrref_operator type_qualifier_list type_parameter_redeclarator
                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
        | '(' type_parameter_ptr ')' attribute_list_opt
                { $$ = $2->addQualifiers( $4 ); }
        ;

type_parameter_array:
        typedef array_parameter_dimension
                { $$ = $1->addArray( $2 ); }
        | '(' type_parameter_ptr ')' array_parameter_dimension
                { $$ = $2->addArray( $4 ); }
        ;

type_parameter_function:
        typedef '(' push parameter_type_list_opt pop ')'        // empty parameter list OBSOLESCENT (see 3)
                { $$ = $1->addParamList( $4 ); }
        | '(' type_parameter_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
                { $$ = $2->addParamList( $6 ); }
        ;

// This pattern parses a declaration of an abstract variable or function prototype, i.e., there is no identifier to
// which the type applies, e.g.:
//
//              sizeof( int );
//              sizeof( int * );
//              sizeof( int [10] );
//              sizeof( int (*)() );
//              sizeof( int () );
//
// The pattern precludes declaring an array of functions versus a pointer to an array of functions, and returning arrays
// and functions versus pointers to arrays and functions.

abstract_declarator:
        abstract_ptr
        | abstract_array attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | abstract_function attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        ;

abstract_ptr:
        ptrref_operator
                { $$ = DeclarationNode::newPointer( 0, $1 ); }
        | ptrref_operator type_qualifier_list
                { $$ = DeclarationNode::newPointer( $2, $1 ); }
        | ptrref_operator abstract_declarator
                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | ptrref_operator type_qualifier_list abstract_declarator
                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
        | '(' abstract_ptr ')' attribute_list_opt
                { $$ = $2->addQualifiers( $4 ); }
        ;

abstract_array:
        array_dimension
        | '(' abstract_ptr ')' array_dimension
                { $$ = $2->addArray( $4 ); }
        | '(' abstract_array ')' multi_array_dimension          // redundant parenthesis
                { $$ = $2->addArray( $4 ); }
        | '(' abstract_array ')'                                                        // redundant parenthesis
                { $$ = $2; }
        ;

abstract_function:
        '(' push parameter_type_list_opt pop ')'                        // empty parameter list OBSOLESCENT (see 3)
                { $$ = DeclarationNode::newFunction( nullptr, nullptr, $3, nullptr ); }
        | '(' abstract_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
                { $$ = $2->addParamList( $6 ); }
        | '(' abstract_function ')'                                                     // redundant parenthesis
                { $$ = $2; }
        ;

array_dimension:
                // Only the first dimension can be empty.
        '[' ']'
                { $$ = DeclarationNode::newArray( 0, 0, false ); }
        | '[' ']' multi_array_dimension
                { $$ = DeclarationNode::newArray( 0, 0, false )->addArray( $3 ); }
        | multi_array_dimension
        ;

multi_array_dimension:
        '[' push assignment_expression pop ']'
                { $$ = DeclarationNode::newArray( $3, 0, false ); }
        | '[' push '*' pop ']'                                                          // C99
                { $$ = DeclarationNode::newVarArray( 0 ); }
        | multi_array_dimension '[' push assignment_expression pop ']'
                { $$ = $1->addArray( DeclarationNode::newArray( $4, 0, false ) ); }
        | multi_array_dimension '[' push '*' pop ']'            // C99
                { $$ = $1->addArray( DeclarationNode::newVarArray( 0 ) ); }
        ;

// This pattern parses a declaration of a parameter abstract variable or function prototype, i.e., there is no
// identifier to which the type applies, e.g.:
//
//              int f( int );                   // not handled here
//              int f( int * );                 // abstract function-prototype parameter; no parameter name specified
//              int f( int (*)() );             // abstract function-prototype parameter; no parameter name specified
//              int f( int (int) );             // abstract function-prototype parameter; no parameter name specified
//
// The pattern precludes declaring an array of functions versus a pointer to an array of functions, and returning arrays
// and functions versus pointers to arrays and functions. In addition, the pattern handles the
// special meaning of parenthesis around a typedef name:
//
//              ISO/IEC 9899:1999 Section 6.7.5.3(11) : "In a parameter declaration, a single typedef name in
//              parentheses is taken to be an abstract declarator that specifies a function with a single parameter,
//              not as redundant parentheses around the identifier."
//
// For example:
//
//              typedef float T;
//              int f( int ( T [5] ) );                                 // see abstract_parameter_declarator
//              int g( int ( T ( int ) ) );                             // see abstract_parameter_declarator
//              int f( int f1( T a[5] ) );                              // see identifier_parameter_declarator
//              int g( int g1( T g2( int p ) ) );               // see identifier_parameter_declarator
//
// In essence, a '(' immediately to the left of typedef name, T, is interpreted as starting a parameter type list, and
// not as redundant parentheses around a redeclaration of T. Finally, the pattern also precludes declaring an array of
// functions versus a pointer to an array of functions, and returning arrays and functions versus pointers to arrays and
// functions.

abstract_parameter_declarator:
        abstract_parameter_ptr
        | '&' MUTEX attribute_list_opt
                { $$ = DeclarationNode::newPointer( DeclarationNode::newTypeQualifier( Type::Mutex ), OperKinds::AddressOf )->addQualifiers( $3 ); }
        | abstract_parameter_array attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | abstract_parameter_function attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        ;

abstract_parameter_ptr:
        ptrref_operator
                { $$ = DeclarationNode::newPointer( nullptr, $1 ); }
        | ptrref_operator type_qualifier_list
                { $$ = DeclarationNode::newPointer( $2, $1 ); }
        | ptrref_operator abstract_parameter_declarator
                { $$ = $2->addPointer( DeclarationNode::newPointer( nullptr, $1 ) ); }
        | ptrref_operator type_qualifier_list abstract_parameter_declarator
                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
        | '(' abstract_parameter_ptr ')' attribute_list_opt
                { $$ = $2->addQualifiers( $4 ); }
        ;

abstract_parameter_array:
        array_parameter_dimension
        | '(' abstract_parameter_ptr ')' array_parameter_dimension
                { $$ = $2->addArray( $4 ); }
        | '(' abstract_parameter_array ')' multi_array_dimension // redundant parenthesis
                { $$ = $2->addArray( $4 ); }
        | '(' abstract_parameter_array ')'                                      // redundant parenthesis
                { $$ = $2; }
        ;

abstract_parameter_function:
        '(' push parameter_type_list_opt pop ')'                        // empty parameter list OBSOLESCENT (see 3)
                { $$ = DeclarationNode::newFunction( nullptr, nullptr, $3, nullptr ); }
        | '(' abstract_parameter_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
                { $$ = $2->addParamList( $6 ); }
        | '(' abstract_parameter_function ')'                           // redundant parenthesis
                { $$ = $2; }
        ;

array_parameter_dimension:
                // Only the first dimension can be empty or have qualifiers.
        array_parameter_1st_dimension
        | array_parameter_1st_dimension multi_array_dimension
                { $$ = $1->addArray( $2 ); }
        | multi_array_dimension
        ;

// The declaration of an array parameter has additional syntax over arrays in normal variable declarations:
//
//              ISO/IEC 9899:1999 Section 6.7.5.2(1) : "The optional type qualifiers and the keyword static shall appear only in
//              a declaration of a function parameter with an array type, and then only in the outermost array type derivation."

array_parameter_1st_dimension:
        '[' ']'
                { $$ = DeclarationNode::newArray( 0, 0, false ); }
                // multi_array_dimension handles the '[' '*' ']' case
        | '[' push type_qualifier_list '*' pop ']'                      // remaining C99
                { $$ = DeclarationNode::newVarArray( $3 ); }
        | '[' push type_qualifier_list pop ']'
                { $$ = DeclarationNode::newArray( 0, $3, false ); }
                // multi_array_dimension handles the '[' assignment_expression ']' case
        | '[' push type_qualifier_list assignment_expression pop ']'
                { $$ = DeclarationNode::newArray( $4, $3, false ); }
        | '[' push STATIC type_qualifier_list_opt assignment_expression pop ']'
                { $$ = DeclarationNode::newArray( $5, $4, true ); }
        | '[' push type_qualifier_list STATIC assignment_expression pop ']'
                { $$ = DeclarationNode::newArray( $5, $3, true ); }
        ;

// This pattern parses a declaration of an abstract variable, but does not allow "int ()" for a function pointer.
//
//              struct S {
//          int;
//          int *;
//          int [10];
//          int (*)();
//      };

variable_abstract_declarator:
        variable_abstract_ptr
        | variable_abstract_array attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        | variable_abstract_function attribute_list_opt
                { $$ = $1->addQualifiers( $2 ); }
        ;

variable_abstract_ptr:
        ptrref_operator
                { $$ = DeclarationNode::newPointer( 0, $1 ); }
        | ptrref_operator type_qualifier_list
                { $$ = DeclarationNode::newPointer( $2, $1 ); }
        | ptrref_operator variable_abstract_declarator
                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | ptrref_operator type_qualifier_list variable_abstract_declarator
                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
        | '(' variable_abstract_ptr ')' attribute_list_opt
                { $$ = $2->addQualifiers( $4 ); }
        ;

variable_abstract_array:
        array_dimension
        | '(' variable_abstract_ptr ')' array_dimension
                { $$ = $2->addArray( $4 ); }
        | '(' variable_abstract_array ')' multi_array_dimension // redundant parenthesis
                { $$ = $2->addArray( $4 ); }
        | '(' variable_abstract_array ')'                                       // redundant parenthesis
                { $$ = $2; }
        ;

variable_abstract_function:
        '(' variable_abstract_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
                { $$ = $2->addParamList( $6 ); }
        | '(' variable_abstract_function ')'                            // redundant parenthesis
                { $$ = $2; }
        ;

// This pattern parses a new-style declaration for a parameter variable or function prototype that is either an
// identifier or typedef name and allows the C99 array options, which can only appear in a parameter list.

cfa_identifier_parameter_declarator_tuple:                              // CFA
        cfa_identifier_parameter_declarator_no_tuple
        | cfa_abstract_tuple
        | type_qualifier_list cfa_abstract_tuple
                { $$ = $2->addQualifiers( $1 ); }
        ;

cfa_identifier_parameter_declarator_no_tuple:                   // CFA
        cfa_identifier_parameter_ptr
        | cfa_identifier_parameter_array
        ;

cfa_identifier_parameter_ptr:                                                   // CFA
                // No SUE declaration in parameter list.
        ptrref_operator type_specifier_nobody
                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | type_qualifier_list ptrref_operator type_specifier_nobody
                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
        | ptrref_operator cfa_abstract_function
                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | type_qualifier_list ptrref_operator cfa_abstract_function
                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
        | ptrref_operator cfa_identifier_parameter_declarator_tuple
                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | type_qualifier_list ptrref_operator cfa_identifier_parameter_declarator_tuple
                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
        ;

cfa_identifier_parameter_array:                                                 // CFA
                // Only the first dimension can be empty or have qualifiers. Empty dimension must be factored out due to
                // shift/reduce conflict with new-style empty (void) function return type.
        '[' ']' type_specifier_nobody
                { $$ = $3->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
        | cfa_array_parameter_1st_dimension type_specifier_nobody
                { $$ = $2->addNewArray( $1 ); }
        | '[' ']' multi_array_dimension type_specifier_nobody
                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
        | cfa_array_parameter_1st_dimension multi_array_dimension type_specifier_nobody
                { $$ = $3->addNewArray( $2 )->addNewArray( $1 ); }
        | multi_array_dimension type_specifier_nobody
                { $$ = $2->addNewArray( $1 ); }

        | '[' ']' cfa_identifier_parameter_ptr
                { $$ = $3->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
        | cfa_array_parameter_1st_dimension cfa_identifier_parameter_ptr
                { $$ = $2->addNewArray( $1 ); }
        | '[' ']' multi_array_dimension cfa_identifier_parameter_ptr
                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
        | cfa_array_parameter_1st_dimension multi_array_dimension cfa_identifier_parameter_ptr
                { $$ = $3->addNewArray( $2 )->addNewArray( $1 ); }
        | multi_array_dimension cfa_identifier_parameter_ptr
                { $$ = $2->addNewArray( $1 ); }
        ;

cfa_array_parameter_1st_dimension:
        '[' push type_qualifier_list '*' pop ']'                        // remaining C99
                { $$ = DeclarationNode::newVarArray( $3 ); }
        | '[' push type_qualifier_list assignment_expression pop ']'
                { $$ = DeclarationNode::newArray( $4, $3, false ); }
        | '[' push declaration_qualifier_list assignment_expression pop ']'
                // declaration_qualifier_list must be used because of shift/reduce conflict with
                // assignment_expression, so a semantic check is necessary to preclude them as a type_qualifier cannot
                // appear in this context.
                { $$ = DeclarationNode::newArray( $4, $3, true ); }
        | '[' push declaration_qualifier_list type_qualifier_list assignment_expression pop ']'
                { $$ = DeclarationNode::newArray( $5, $4->addQualifiers( $3 ), true ); }
        ;

// This pattern parses a new-style declaration of an abstract variable or function prototype, i.e., there is no
// identifier to which the type applies, e.g.:
//
//              [int] f( int );                         // abstract variable parameter; no parameter name specified
//              [int] f( [int] (int) );         // abstract function-prototype parameter; no parameter name specified
//
// These rules need LR(3):
//
//              cfa_abstract_tuple identifier_or_type_name
//              '[' cfa_parameter_list ']' identifier_or_type_name '(' cfa_parameter_ellipsis_list_opt ')'
//
// since a function return type can be syntactically identical to a tuple type:
//
//              [int, int] t;
//              [int, int] f( int );
//
// Therefore, it is necessary to look at the token after identifier_or_type_name to know when to reduce
// cfa_abstract_tuple. To make this LR(1), several rules have to be flattened (lengthened) to allow the necessary
// lookahead. To accomplish this, cfa_abstract_declarator has an entry point without tuple, and tuple declarations are
// duplicated when appearing with cfa_function_specifier.

cfa_abstract_declarator_tuple:                                                  // CFA
        cfa_abstract_tuple
        | type_qualifier_list cfa_abstract_tuple
                { $$ = $2->addQualifiers( $1 ); }
        | cfa_abstract_declarator_no_tuple
        ;

cfa_abstract_declarator_no_tuple:                                               // CFA
        cfa_abstract_ptr
        | cfa_abstract_array
        ;

cfa_abstract_ptr:                                                                               // CFA
        ptrref_operator type_specifier
                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | type_qualifier_list ptrref_operator type_specifier
                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
        | ptrref_operator cfa_abstract_function
                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | type_qualifier_list ptrref_operator cfa_abstract_function
                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
        | ptrref_operator cfa_abstract_declarator_tuple
                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
        | type_qualifier_list ptrref_operator cfa_abstract_declarator_tuple
                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
        ;

cfa_abstract_array:                                                                             // CFA
                // Only the first dimension can be empty. Empty dimension must be factored out due to shift/reduce conflict with
                // empty (void) function return type.
        '[' ']' type_specifier
                { $$ = $3->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
        | '[' ']' multi_array_dimension type_specifier
                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
        | multi_array_dimension type_specifier
                { $$ = $2->addNewArray( $1 ); }
        | '[' ']' cfa_abstract_ptr
                { $$ = $3->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
        | '[' ']' multi_array_dimension cfa_abstract_ptr
                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
        | multi_array_dimension cfa_abstract_ptr
                { $$ = $2->addNewArray( $1 ); }
        ;

cfa_abstract_tuple:                                                                             // CFA
        '[' push cfa_abstract_parameter_list pop ']'
                { $$ = DeclarationNode::newTuple( $3 ); }
        | '[' push type_specifier_nobody ELLIPSIS pop ']'
                { SemanticError( yylloc, "Tuple array currently unimplemented." ); $$ = nullptr; }
        | '[' push type_specifier_nobody ELLIPSIS constant_expression pop ']'
                { SemanticError( yylloc, "Tuple array currently unimplemented." ); $$ = nullptr; }
        ;

cfa_abstract_function:                                                                  // CFA
//      '[' ']' '(' cfa_parameter_ellipsis_list_opt ')'
//              { $$ = DeclarationNode::newFunction( nullptr, DeclarationNode::newTuple( nullptr ), $4, nullptr ); }
        cfa_abstract_tuple '(' push cfa_parameter_ellipsis_list_opt pop ')'
                { $$ = DeclarationNode::newFunction( nullptr, $1, $4, nullptr ); }
        | cfa_function_return '(' push cfa_parameter_ellipsis_list_opt pop ')'
                { $$ = DeclarationNode::newFunction( nullptr, $1, $4, nullptr ); }
        ;

// 1) ISO/IEC 9899:1999 Section 6.7.2(2) : "At least one type specifier shall be given in the declaration specifiers in
//    each declaration, and in the specifier-qualifier list in each structure declaration and type name."
//
// 2) ISO/IEC 9899:1999 Section 6.11.5(1) : "The placement of a storage-class specifier other than at the beginning of
//    the declaration specifiers in a declaration is an obsolescent feature."
//
// 3) ISO/IEC 9899:1999 Section 6.11.6(1) : "The use of function declarators with empty parentheses (not
//    prototype-format parameter type declarators) is an obsolescent feature."
//
// 4) ISO/IEC 9899:1999 Section 6.11.7(1) : "The use of function definitions with separate parameter identifier and
//    declaration lists (not prototype-format parameter type and identifier declarators) is an obsolescent feature.

//************************* MISCELLANEOUS ********************************

comma_opt:                                                                                              // redundant comma
        // empty
        | ','
        ;

default_initialize_opt:
        // empty
                { $$ = nullptr; }
        | '=' assignment_expression
                { $$ = $2; }
        ;

%%

// ----end of grammar----

// Local Variables: //
// mode: c++ //
// tab-width: 4 //
// compile-command: "make install" //
// End: //