source: libcfa/src/concurrency/future.hfa@ 7baff35

Last change on this file since 7baff35 was bf55f32, checked in by caparsons <caparson@…>, 2 years ago

added support for general channel operators

  • Property mode set to 100644
File size: 8.8 KB
Line 
1//
2// Cforall Version 1.0.0 Copyright (C) 2020 University of Waterloo
3//
4// The contents of this file are covered under the licence agreement in the
5// file "LICENCE" distributed with Cforall.
6//
7// concurrency/future.hfa --
8//
9// Author : Thierry Delisle & Peiran Hong & Colby Parsons
10// Created On : Wed Jan 06 17:33:18 2021
11// Last Modified By :
12// Last Modified On :
13// Update Count :
14//
15
16#pragma once
17
18#include "bits/locks.hfa"
19#include "monitor.hfa"
20#include "select.hfa"
21#include "locks.hfa"
22
23//----------------------------------------------------------------------------
24// future
25// I don't use future_t here since I need to use a lock for this future
26// since it supports multiple consumers
27// future_t is lockfree and uses atomics which aren't needed given we use locks here
28forall( T ) {
29 // enum { FUTURE_EMPTY = 0, FUTURE_FULFILLED = 1 }; // Enums seem to be broken so feel free to add this back afterwards
30
31 // temporary enum replacement
32 const int FUTURE_EMPTY = 0;
33 const int FUTURE_FULFILLED = 1;
34
35 struct future {
36 int state;
37 T result;
38 dlist( select_node ) waiters;
39 futex_mutex lock;
40 };
41 __CFA_SELECT_GET_TYPE( future(T) );
42
43 struct future_node {
44 inline select_node;
45 T * my_result;
46 };
47
48 static inline {
49
50 void ?{}( future_node(T) & this, thread$ * blocked_thread, T * my_result ) {
51 ((select_node &)this){ blocked_thread };
52 this.my_result = my_result;
53 }
54
55 void ?{}( future(T) & this ) {
56 this.waiters{};
57 this.state = FUTURE_EMPTY;
58 this.lock{};
59 }
60
61 // Reset future back to original state
62 void reset( future(T) & this ) with(this)
63 {
64 lock( lock );
65 if( ! waiters`isEmpty )
66 abort("Attempting to reset a future with blocked waiters");
67 state = FUTURE_EMPTY;
68 unlock( lock );
69 }
70
71 // check if the future is available
72 // currently no mutual exclusion because I can't see when you need this call to be synchronous or protected
73 bool available( future(T) & this ) { return __atomic_load_n( &this.state, __ATOMIC_RELAXED ); }
74
75
76 // memcpy wrapper to help copy values
77 void copy_T( T & from, T & to ) {
78 memcpy((void *)&to, (void *)&from, sizeof(T));
79 }
80
81 // internal helper to signal waiters off of the future
82 void _internal_flush( future(T) & this ) with(this) {
83 while( ! waiters`isEmpty ) {
84 if ( !__handle_waituntil_OR( waiters ) ) // handle special waituntil OR case
85 break; // if handle_OR returns false then waiters is empty so break
86 select_node &s = try_pop_front( waiters );
87
88 if ( s.clause_status == 0p ) // poke in result so that woken threads do not need to reacquire any locks
89 copy_T( result, *(((future_node(T) &)s).my_result) );
90
91 wake_one( waiters, s );
92 }
93 }
94
95 // Fulfil the future, returns whether or not someone was unblocked
96 bool fulfil( future(T) & this, T val ) with(this) {
97 lock( lock );
98 if( state != FUTURE_EMPTY )
99 abort("Attempting to fulfil a future that has already been fulfilled");
100
101 copy_T( val, result );
102
103 bool ret_val = ! waiters`isEmpty;
104 state = FUTURE_FULFILLED;
105 _internal_flush( this );
106 unlock( lock );
107 return ret_val;
108 }
109
110 // Wait for the future to be fulfilled
111 // Also return whether the thread had to block or not
112 [T, bool] get( future(T) & this ) with( this ) {
113 lock( lock );
114 T ret_val;
115 if( state == FUTURE_FULFILLED ) {
116 copy_T( result, ret_val );
117 unlock( lock );
118 return [ret_val, false];
119 }
120
121 future_node(T) node = { active_thread(), &ret_val };
122 insert_last( waiters, ((select_node &)node) );
123 unlock( lock );
124 park( );
125
126 return [ret_val, true];
127 }
128
129 // Wait for the future to be fulfilled
130 T get( future(T) & this ) {
131 [T, bool] tt;
132 tt = get(this);
133 return tt.0;
134 }
135
136 // Gets value if it is available and returns [ val, true ]
137 // otherwise returns [ default_val, false]
138 // will not block
139 [T, bool] try_get( future(T) & this ) with(this) {
140 lock( lock );
141 T ret_val;
142 if( state == FUTURE_FULFILLED ) {
143 copy_T( result, ret_val );
144 unlock( lock );
145 return [ret_val, true];
146 }
147 unlock( lock );
148
149 return [ret_val, false];
150 }
151
152 bool register_select( future(T) & this, select_node & s ) with(this) {
153 lock( lock );
154
155 // check if we can complete operation. If so race to establish winner in special OR case
156 if ( !s.park_counter && state != FUTURE_EMPTY ) {
157 if ( !__make_select_node_available( s ) ) { // we didn't win the race so give up on registering
158 unlock( lock );
159 return false;
160 }
161 }
162
163 // future not ready -> insert select node and return
164 if( state == FUTURE_EMPTY ) {
165 insert_last( waiters, s );
166 unlock( lock );
167 return false;
168 }
169
170 __make_select_node_available( s );
171 unlock( lock );
172 return true;
173 }
174
175 bool unregister_select( future(T) & this, select_node & s ) with(this) {
176 if ( ! s`isListed ) return false;
177 lock( lock );
178 if ( s`isListed ) remove( s );
179 unlock( lock );
180 return false;
181 }
182
183 bool on_selected( future(T) & this, select_node & node ) { return true; }
184 }
185}
186
187//--------------------------------------------------------------------------------------------------------
188// These futures below do not support select statements so they may not have as many features as 'future'
189// however the 'single_future' is cheap and cheerful and is most likely more performant than 'future'
190// since it uses raw atomics and no locks
191//
192// As far as 'multi_future' goes I can't see many use cases as it will be less performant than 'future'
193// since it is monitor based and also is not compatible with select statements
194//--------------------------------------------------------------------------------------------------------
195
196forall( T ) {
197 struct single_future {
198 inline future_t;
199 T result;
200 };
201
202 static inline {
203 // Reset future back to original state
204 void reset(single_future(T) & this) { reset( (future_t&)this ); }
205
206 // check if the future is available
207 bool available( single_future(T) & this ) { return available( (future_t&)this ); }
208
209 // Mark the future as abandoned, meaning it will be deleted by the server
210 // This doesn't work beause of the potential need for a destructor
211 void abandon( single_future(T) & this );
212
213 // Fulfil the future, returns whether or not someone was unblocked
214 thread$ * fulfil( single_future(T) & this, T result ) {
215 this.result = result;
216 return fulfil( (future_t&)this );
217 }
218
219 // Wait for the future to be fulfilled
220 // Also return whether the thread had to block or not
221 [T, bool] wait( single_future(T) & this ) {
222 bool r = wait( (future_t&)this );
223 return [this.result, r];
224 }
225
226 // Wait for the future to be fulfilled
227 T wait( single_future(T) & this ) {
228 [T, bool] tt;
229 tt = wait(this);
230 return tt.0;
231 }
232 }
233}
234
235forall( T ) {
236 monitor multi_future {
237 inline future_t;
238 condition blocked;
239 bool has_first;
240 T result;
241 };
242
243 static inline {
244 void ?{}(multi_future(T) & this) {
245 this.has_first = false;
246 }
247
248 bool $first( multi_future(T) & mutex this ) {
249 if (this.has_first) {
250 wait( this.blocked );
251 return false;
252 }
253
254 this.has_first = true;
255 return true;
256 }
257
258 void $first_done( multi_future(T) & mutex this ) {
259 this.has_first = false;
260 signal_all( this.blocked );
261 }
262
263 // Reset future back to original state
264 void reset(multi_future(T) & mutex this) {
265 if( this.has_first != false) abort("Attempting to reset a multi_future with at least one blocked threads");
266 if( !is_empty(this.blocked) ) abort("Attempting to reset a multi_future with multiple blocked threads");
267 reset( (future_t&)this );
268 }
269
270 // Fulfil the future, returns whether or not someone was unblocked
271 bool fulfil( multi_future(T) & this, T result ) {
272 this.result = result;
273 return fulfil( (future_t&)this ) != 0p;
274 }
275
276 // Wait for the future to be fulfilled
277 // Also return whether the thread had to block or not
278 [T, bool] wait( multi_future(T) & this ) {
279 bool sw = $first( this );
280 bool w = !sw;
281 if ( sw ) {
282 w = wait( (future_t&)this );
283 $first_done( this );
284 }
285
286 return [this.result, w];
287 }
288
289 // Wait for the future to be fulfilled
290 T wait( multi_future(T) & this ) {
291 return wait(this).0;
292 }
293 }
294}
Note: See TracBrowser for help on using the repository browser.