source: doc/theses/thierry_delisle_PhD/thesis/Makefile @ ce1d721

## Define the configuration variables.

Build = build
Figures = img

LaTMac = ../../../LaTeXmacros
BibRep = ../../../bibliography

Macros = ${LaTMac}
TeXLIB = .:${Macros}:${Build}:${BibRep}:
LaTeX  = TEXINPUTS=${TeXLIB} && export TEXINPUTS && latex -halt-on-error -output-directory=${Build}
BibTeX = BIBINPUTS=${TeXLIB} && export BIBINPUTS && bibtex

MAKEFLAGS = --no-print-directory # --silent
VPATH = ${Build} ${Figures}

## Define the text source files.
TEXTS = ${addprefix text/, ${addsuffix .tex, \
        front \
        intro \
        existing \
        runtime \
        core \
        practice \
        io \
        eval_micro \
        eval_macro \
}}

FIGURES = ${addsuffix .tex, \
}

PICTURES = ${addsuffix .pstex, \
        base \
        base_avg \
        base_ts2 \
        cache-share \
        cache-noshare \
        empty \
        emptybit \
        emptytls \
        emptytree \
        executionStates \
        fairness \
        idle \
        idle1 \
        idle2 \
        idle_state \
        io_uring \
        pivot_ring \
        MQMS \
        MQMSG \
        system \
        cycle \
        result.cycle.jax.ops \
        result.yield.jax.ops \
        result.churn.jax.ops \
        result.cycle.jax.ns \
        result.yield.jax.ns \
        result.churn.jax.ns \
        result.cycle.low.jax.ops \
        result.yield.low.jax.ops \
        result.churn.low.jax.ops \
        result.cycle.low.jax.ns \
        result.yield.low.jax.ns \
        result.churn.low.jax.ns \
        result.memcd.updt.qps \
        result.memcd.updt.lat \
        result.memcd.rate.qps \
        result.memcd.rate.99th \
        SQMS \
}

PROGRAMS = ${addsuffix .tex, \
}

GRAPHS = ${addsuffix .tex, \
}

## Define the documents that need to be made.
all: thesis.pdf
thesis.pdf: ${TEXTS} ${FIGURES} ${PICTURES} thesis.tex glossary.tex local.bib ${LaTMac}/common.tex ${LaTMac}/common.sty ${BibRep}/pl.bib

DOCUMENT = thesis.pdf
BASE = ${basename ${DOCUMENT}}

# Directives #

.NOTPARALLEL:                                           # cannot make in parallel

.PHONY : all clean                                      # not file names

all : ${DOCUMENT}

clean :
        @rm -frv ${DOCUMENT} ${BASE}.ps ${Build}

# File Dependencies #

%.pdf : build/%.ps | ${Build}
        ps2pdf $<

build/%.ps : build/%.dvi | ${Build}
        dvips $< -o $@

build/%.dvi : %.tex Makefile | ${Build}
        # Conditionally create an empty *.ind (index) file for inclusion until makeindex is run.
        if [ ! -r ${basename $@}.ind ] ; then touch ${basename $@}.ind ; fi
        # Must have *.aux file containing citations for bibtex
        if [ ! -r ${basename $@}.aux ] ; then ${LaTeX} $< ; fi
        -${BibTeX} ${basename $@}
        # Some citations reference others so run again to resolve these citations
        ${LaTeX} $<
        -${BibTeX} ${basename $@}
        # Make index from *.aux entries and input index at end of document
        -makeglossaries -q -s ${basename $@}.ist ${basename $@}
        # Make index from *.aux entries and input index at end of document
        -makeindex ${basename $@}.idx
        # Run again to finish citations
        ${LaTeX} $<

## Define the default recipes.

${Build}:
        mkdir -p ${Build}

%.tex : fig/%.fig | ${Build}
        fig2dev -L eepic $< > ${Build}/$@

%.ps : fig/%.fig | ${Build}
        fig2dev -L ps $< > ${Build}/$@

%.pstex : fig/%.fig | ${Build}
        fig2dev -L pstex $< > ${Build}/$@
        fig2dev -L pstex_t -p ${Build}/$@ $< > ${Build}/$@_t

%.pstex : build/%.svg | ${Build}
        inkscape -z -D --file=$< --export-eps=${Build}/$@ --export-latex
        mv ${Build}/$@_tex ${Build}/$@_t
        echo "sed -i 's/$@/${Build}/$@/g' ${Build}/$@_t"
        sed -i 's/$@/${Build}\/$@/g' ${Build}/$@_t

build/fairness.svg : fig/fairness.py | ${Build}
        python3 $< $@

cycle_jax_ops_FLAGS = --MaxY=120000000
cycle_low_jax_ops_FLAGS = --MaxY=120000000
cycle_jax_ns_FLAGS = --MaxY=2000
cycle_low_jax_ns_FLAGS = --MaxY=2000

yield_jax_ops_FLAGS = --MaxY=150000000
yield_low_jax_ops_FLAGS = --MaxY=150000000
yield_jax_ns_FLAGS = --MaxY=1500
yield_low_jax_ns_FLAGS = --MaxY=1500

build/result.%.ns.svg : data/% Makefile | ${Build}
        ../../../../benchmark/plot.py -f $< -o $@ -y "ns per ops/procs" $($(subst .,_,$*)_ns_FLAGS)

build/result.%.ops.svg : data/% Makefile | ${Build}
        ../../../../benchmark/plot.py -f $< -o $@ -y "Ops per second" $($(subst .,_,$*)_ops_FLAGS)

build/result.memcd.updt.qps.svg : data/memcd.updt Makefile | ${Build}
        ../../../../benchmark/plot.py -f $< -o $@ -y "Actual QPS" -x "Update Ratio"

build/result.memcd.updt.lat.svg : data/memcd.updt Makefile | ${Build}
        ../../../../benchmark/plot.py -f $< -o $@ -y "Average Read Latency" -x "Update Ratio"

build/result.memcd.rate.qps.svg : data/memcd.rate Makefile | ${Build}
        ../../../../benchmark/plot.py -f $< -o $@ -y "Actual QPS" -x "Target QPS"

build/result.memcd.rate.99th.svg : data/memcd.rate Makefile | ${Build}
        ../../../../benchmark/plot.py -f $< -o $@ -y "Tail Read Latency" -x "Target QPS"

## pstex with inverted colors
%.dark.pstex : fig/%.fig Makefile | ${Build}
        fig2dev -L pstex $< > ${Build}/$@
        sed -i 's/\/col-1 {0 setgray} bind def/\/col-1 {1 setgray} bind def/g' ${Build}/$@
        sed -i 's/\/col0 {0.000 0.000 0.000 srgb} bind def/\/col0 {1.000 1.000 1.000 srgb} bind def/g' ${Build}/$@
        sed -i 's/\/col7 {1.000 1.000 1.000 srgb} bind def/\/col7 {0.000 0.000 0.000 srgb} bind def/g' ${Build}/$@
        fig2dev -L pstex_t -p ${Build}/$@ $< > ${Build}/$@_t

# Local Variables: #
# compile-command: "make" #
# End: #