source: doc/theses/thierry_delisle_PhD/thesis/Makefile @ 1f201238

pthread-emulationqualifiedEnum
Last change on this file since 1f201238 was 1f201238, checked in by Peter A. Buhr <pabuhr@…>, 5 months ago

add 4 figures for consideration

  • Property mode set to 100644
File size: 4.9 KB
Line 
1## Define the configuration variables.
2
3Build = build
4Figures = img
5
6LaTMac = ../../../LaTeXmacros
7BibRep = ../../../bibliography
8
9Macros = ${LaTMac}
10TeXLIB = .:${Macros}:${Build}:${BibRep}:
11LaTeX  = TEXINPUTS=${TeXLIB} && export TEXINPUTS && latex -halt-on-error -output-directory=${Build}
12BibTeX = BIBINPUTS=${TeXLIB} && export BIBINPUTS && bibtex
13
14MAKEFLAGS = --no-print-directory # --silent
15VPATH = ${Build} ${Figures}
16
17## Define the text source files.
18TEXTS = ${addprefix text/, ${addsuffix .tex, \
19        front \
20        intro \
21        existing \
22        runtime \
23        core \
24        practice \
25        io \
26        eval_micro \
27        eval_macro \
28}}
29
30FIGURES = ${addsuffix .tex, \
31}
32
33PICTURES = ${addsuffix .pstex, \
34        base \
35        base_avg \
36        cache-share \
37        cache-noshare \
38        empty \
39        emptybit \
40        emptytls \
41        emptytree \
42        executionStates \
43        fairness \
44        idle \
45        idle1 \
46        idle2 \
47        idle_state \
48        io_uring \
49        pivot_ring \
50        MQMS \
51        MQMSG \
52        system \
53        cycle \
54        result.cycle.jax.ops \
55        result.yield.jax.ops \
56        result.churn.jax.ops \
57        result.cycle.jax.ns \
58        result.yield.jax.ns \
59        result.churn.jax.ns \
60        result.cycle.low.jax.ops \
61        result.yield.low.jax.ops \
62        result.churn.low.jax.ops \
63        result.cycle.low.jax.ns \
64        result.yield.low.jax.ns \
65        result.churn.low.jax.ns \
66        result.memcd.updt.qps \
67        result.memcd.updt.lat \
68        result.memcd.rate.qps \
69        result.memcd.rate.99th \
70        SQMS \
71}
72
73PROGRAMS = ${addsuffix .tex, \
74}
75
76GRAPHS = ${addsuffix .tex, \
77}
78
79## Define the documents that need to be made.
80all: thesis.pdf
81thesis.pdf: ${TEXTS} ${FIGURES} ${PICTURES} thesis.tex glossary.tex local.bib ${LaTMac}/common.tex ${LaTMac}/common.sty ${BibRep}/pl.bib
82
83DOCUMENT = thesis.pdf
84BASE = ${basename ${DOCUMENT}}
85
86# Directives #
87
88.NOTPARALLEL:                                           # cannot make in parallel
89
90.PHONY : all clean                                      # not file names
91
92all : ${DOCUMENT}
93
94clean :
95        @rm -frv ${DOCUMENT} ${BASE}.ps ${Build}
96
97# File Dependencies #
98
99%.pdf : build/%.ps | ${Build}
100        ps2pdf $<
101
102build/%.ps : build/%.dvi | ${Build}
103        dvips $< -o $@
104
105build/%.dvi : %.tex Makefile | ${Build}
106        # Conditionally create an empty *.ind (index) file for inclusion until makeindex is run.
107        if [ ! -r ${basename $@}.ind ] ; then touch ${basename $@}.ind ; fi
108        # Must have *.aux file containing citations for bibtex
109        if [ ! -r ${basename $@}.aux ] ; then ${LaTeX} $< ; fi
110        -${BibTeX} ${basename $@}
111        # Some citations reference others so run again to resolve these citations
112        ${LaTeX} $<
113        -${BibTeX} ${basename $@}
114        # Make index from *.aux entries and input index at end of document
115        -makeglossaries -q -s ${basename $@}.ist ${basename $@}
116        # Make index from *.aux entries and input index at end of document
117        -makeindex ${basename $@}.idx
118        # Run again to finish citations
119        ${LaTeX} $<
120
121## Define the default recipes.
122
123${Build}:
124        mkdir -p ${Build}
125
126%.tex : fig/%.fig | ${Build}
127        fig2dev -L eepic $< > ${Build}/$@
128
129%.ps : fig/%.fig | ${Build}
130        fig2dev -L ps $< > ${Build}/$@
131
132%.pstex : fig/%.fig | ${Build}
133        fig2dev -L pstex $< > ${Build}/$@
134        fig2dev -L pstex_t -p ${Build}/$@ $< > ${Build}/$@_t
135
136%.pstex : build/%.svg | ${Build}
137        inkscape -z -D --file=$< --export-eps=${Build}/$@ --export-latex
138        mv ${Build}/$@_tex ${Build}/$@_t
139        echo "sed -i 's/$@/${Build}/$@/g' ${Build}/$@_t"
140        sed -i 's/$@/${Build}\/$@/g' ${Build}/$@_t
141
142build/fairness.svg : fig/fairness.py | ${Build}
143        python3 $< $@
144
145cycle_jax_ops_FLAGS = --MaxY=120000000
146cycle_low_jax_ops_FLAGS = --MaxY=120000000
147cycle_jax_ns_FLAGS = --MaxY=2000
148cycle_low_jax_ns_FLAGS = --MaxY=2000
149
150yield_jax_ops_FLAGS = --MaxY=150000000
151yield_low_jax_ops_FLAGS = --MaxY=150000000
152yield_jax_ns_FLAGS = --MaxY=1500
153yield_low_jax_ns_FLAGS = --MaxY=1500
154
155build/result.%.ns.svg : data/% Makefile | ${Build}
156        ../../../../benchmark/plot.py -f $< -o $@ -y "ns per ops/procs" $($(subst .,_,$*)_ns_FLAGS)
157
158build/result.%.ops.svg : data/% Makefile | ${Build}
159        ../../../../benchmark/plot.py -f $< -o $@ -y "Ops per second" $($(subst .,_,$*)_ops_FLAGS)
160
161build/result.memcd.updt.qps.svg : data/memcd.updt Makefile | ${Build}
162        ../../../../benchmark/plot.py -f $< -o $@ -y "Actual QPS" -x "Update Ratio"
163
164build/result.memcd.updt.lat.svg : data/memcd.updt Makefile | ${Build}
165        ../../../../benchmark/plot.py -f $< -o $@ -y "Average Read Latency" -x "Update Ratio"
166
167build/result.memcd.rate.qps.svg : data/memcd.rate Makefile | ${Build}
168        ../../../../benchmark/plot.py -f $< -o $@ -y "Actual QPS" -x "Target QPS"
169
170build/result.memcd.rate.99th.svg : data/memcd.rate Makefile | ${Build}
171        ../../../../benchmark/plot.py -f $< -o $@ -y "Tail Read Latency" -x "Target QPS"
172
173## pstex with inverted colors
174%.dark.pstex : fig/%.fig Makefile | ${Build}
175        fig2dev -L pstex $< > ${Build}/$@
176        sed -i 's/\/col-1 {0 setgray} bind def/\/col-1 {1 setgray} bind def/g' ${Build}/$@
177        sed -i 's/\/col0 {0.000 0.000 0.000 srgb} bind def/\/col0 {1.000 1.000 1.000 srgb} bind def/g' ${Build}/$@
178        sed -i 's/\/col7 {1.000 1.000 1.000 srgb} bind def/\/col7 {0.000 0.000 0.000 srgb} bind def/g' ${Build}/$@
179        fig2dev -L pstex_t -p ${Build}/$@ $< > ${Build}/$@_t
180
181# Local Variables: #
182# compile-command: "make" #
183# End: #
Note: See TracBrowser for help on using the repository browser.