source: doc/theses/thierry_delisle_MMath/text/internals.tex @ d0cd933

ADTarm-ehast-experimentalenumforall-pointer-decayjacob/cs343-translationnew-ast-unique-exprpthread-emulationqualifiedEnum
Last change on this file since d0cd933 was 67982887, checked in by Peter A. Buhr <pabuhr@…>, 6 years ago

specialize thesis directory-names

  • Property mode set to 100644
File size: 24.5 KB
Line 
1
2\chapter{Behind the Scenes}
3There are several challenges specific to \CFA when implementing concurrency. These challenges are a direct result of \gls{bulk-acq} and loose object definitions. These two constraints are the root cause of most design decisions in the implementation. Furthermore, to avoid contention from dynamically allocating memory in a concurrent environment, the internal-scheduling design is (almost) entirely free of mallocs. This approach avoids the chicken and egg problem~\cite{Chicken} of having a memory allocator that relies on the threading system and a threading system that relies on the runtime. This extra goal means that memory management is a constant concern in the design of the system.
4
5The main memory concern for concurrency is queues. All blocking operations are made by parking threads onto queues and all queues are designed with intrusive nodes, where each node has pre-allocated link fields for chaining, to avoid the need for memory allocation. Since several concurrency operations can use an unbound amount of memory (depending on \gls{bulk-acq}), statically defining information in the intrusive fields of threads is insufficient.The only way to use a variable amount of memory without requiring memory allocation is to pre-allocate large buffers of memory eagerly and store the information in these buffers. Conveniently, the call stack fits that description and is easy to use, which is why it is used heavily in the implementation of internal scheduling, particularly variable-length arrays. Since stack allocation is based on scopes, the first step of the implementation is to identify the scopes that are available to store the information, and which of these can have a variable-length array. The threads and the condition both have a fixed amount of memory, while \code{mutex} routines and blocking calls allow for an unbound amount, within the stack size.
6
7Note that since the major contributions of this thesis are extending monitor semantics to \gls{bulk-acq} and loose object definitions, any challenges that are not resulting of these characteristics of \CFA are considered as solved problems and therefore not discussed.
8
9% ======================================================================
10% ======================================================================
11\section{Mutex Routines}
12% ======================================================================
13% ======================================================================
14
15The first step towards the monitor implementation is simple \code{mutex} routines. In the single monitor case, mutual-exclusion is done using the entry/exit procedure in listing \ref{lst:entry1}. The entry/exit procedures do not have to be extended to support multiple monitors. Indeed it is sufficient to enter/leave monitors one-by-one as long as the order is correct to prevent deadlock~\cite{Havender68}. In \CFA, ordering of monitor acquisition relies on memory ordering. This approach is sufficient because all objects are guaranteed to have distinct non-overlapping memory layouts and mutual-exclusion for a monitor is only defined for its lifetime, meaning that destroying a monitor while it is acquired is undefined behaviour. When a mutex call is made, the concerned monitors are aggregated into a variable-length pointer array and sorted based on pointer values. This array persists for the entire duration of the mutual-exclusion and its ordering reused extensively.
16\begin{figure}
17\begin{multicols}{2}
18Entry
19\begin{pseudo}
20if monitor is free
21        enter
22elif already own the monitor
23        continue
24else
25        block
26increment recursions
27\end{pseudo}
28\columnbreak
29Exit
30\begin{pseudo}
31decrement recursion
32if recursion == 0
33        if entry queue not empty
34                wake-up thread
35\end{pseudo}
36\end{multicols}
37\begin{pseudo}[caption={Initial entry and exit routine for monitors},label={lst:entry1}]
38\end{pseudo}
39\end{figure}
40
41\subsection{Details: Interaction with polymorphism}
42Depending on the choice of semantics for when monitor locks are acquired, interaction between monitors and \CFA's concept of polymorphism can be more complex to support. However, it is shown that entry-point locking solves most of the issues.
43
44First of all, interaction between \code{otype} polymorphism (see Section~\ref{s:ParametricPolymorphism}) and monitors is impossible since monitors do not support copying. Therefore, the main question is how to support \code{dtype} polymorphism. It is important to present the difference between the two acquiring options: \glspl{callsite-locking} and entry-point locking, i.e., acquiring the monitors before making a mutex routine-call or as the first operation of the mutex routine-call. For example:
45\begin{table}[H]
46\begin{center}
47\begin{tabular}{|c|c|c|}
48Mutex & \gls{callsite-locking} & \gls{entry-point-locking} \\
49call & pseudo-code & pseudo-code \\
50\hline
51\begin{cfacode}[tabsize=3]
52void foo(monitor& mutex a){
53
54        //Do Work
55        //...
56
57}
58
59void main() {
60        monitor a;
61
62        foo(a);
63
64}
65\end{cfacode} & \begin{pseudo}[tabsize=3]
66foo(& a) {
67
68        //Do Work
69        //...
70
71}
72
73main() {
74        monitor a;
75        acquire(a);
76        foo(a);
77        release(a);
78}
79\end{pseudo} & \begin{pseudo}[tabsize=3]
80foo(& a) {
81        acquire(a);
82        //Do Work
83        //...
84        release(a);
85}
86
87main() {
88        monitor a;
89
90        foo(a);
91
92}
93\end{pseudo}
94\end{tabular}
95\end{center}
96\caption{Call-site vs entry-point locking for mutex calls}
97\label{tbl:locking-site}
98\end{table}
99
100Note the \code{mutex} keyword relies on the type system, which means that in cases where a generic monitor-routine is desired, writing the mutex routine is possible with the proper trait, e.g.:
101\begin{cfacode}
102//Incorrect: T may not be monitor
103forall(dtype T)
104void foo(T * mutex t);
105
106//Correct: this function only works on monitors (any monitor)
107forall(dtype T | is_monitor(T))
108void bar(T * mutex t));
109\end{cfacode}
110
111Both entry point and \gls{callsite-locking} are feasible implementations. The current \CFA implementation uses entry-point locking because it requires less work when using \gls{raii}, effectively transferring the burden of implementation to object construction/destruction. It is harder to use \gls{raii} for call-site locking, as it does not necessarily have an existing scope that matches exactly the scope of the mutual exclusion, i.e., the function body. For example, the monitor call can appear in the middle of an expression. Furthermore, entry-point locking requires less code generation since any useful routine is called multiple times but there is only one entry point for many call sites.
112
113% ======================================================================
114% ======================================================================
115\section{Threading} \label{impl:thread}
116% ======================================================================
117% ======================================================================
118
119Figure \ref{fig:system1} shows a high-level picture if the \CFA runtime system in regards to concurrency. Each component of the picture is explained in detail in the flowing sections.
120
121\begin{figure}
122\begin{center}
123{\resizebox{\textwidth}{!}{\input{system.pstex_t}}}
124\end{center}
125\caption{Overview of the entire system}
126\label{fig:system1}
127\end{figure}
128
129\subsection{Processors}
130Parallelism in \CFA is built around using processors to specify how much parallelism is desired. \CFA processors are object wrappers around kernel threads, specifically \texttt{pthread}s in the current implementation of \CFA. Indeed, any parallelism must go through operating-system libraries. However, \glspl{uthread} are still the main source of concurrency, processors are simply the underlying source of parallelism. Indeed, processor \glspl{kthread} simply fetch a \gls{uthread} from the scheduler and run it; they are effectively executers for user-threads. The main benefit of this approach is that it offers a well-defined boundary between kernel code and user code, for example, kernel thread quiescing, scheduling and interrupt handling. Processors internally use coroutines to take advantage of the existing context-switching semantics.
131
132\subsection{Stack Management}
133One of the challenges of this system is to reduce the footprint as much as possible. Specifically, all \texttt{pthread}s created also have a stack created with them, which should be used as much as possible. Normally, coroutines also create their own stack to run on, however, in the case of the coroutines used for processors, these coroutines run directly on the \gls{kthread} stack, effectively stealing the processor stack. The exception to this rule is the Main Processor, i.e., the initial \gls{kthread} that is given to any program. In order to respect C user expectations, the stack of the initial kernel thread, the main stack of the program, is used by the main user thread rather than the main processor, which can grow very large.
134
135\subsection{Context Switching}
136As mentioned in section \ref{coroutine}, coroutines are a stepping stone for implementing threading, because they share the same mechanism for context-switching between different stacks. To improve performance and simplicity, context-switching is implemented using the following assumption: all context-switches happen inside a specific function call. This assumption means that the context-switch only has to copy the callee-saved registers onto the stack and then switch the stack registers with the ones of the target coroutine/thread. Note that the instruction pointer can be left untouched since the context-switch is always inside the same function. Threads, however, do not context-switch between each other directly. They context-switch to the scheduler. This method is called a 2-step context-switch and has the advantage of having a clear distinction between user code and the kernel where scheduling and other system operations happen. Obviously, this doubles the context-switch cost because threads must context-switch to an intermediate stack. The alternative 1-step context-switch uses the stack of the ``from'' thread to schedule and then context-switches directly to the ``to'' thread. However, the performance of the 2-step context-switch is still superior to a \code{pthread_yield} (see section \ref{results}). Additionally, for users in need for optimal performance, it is important to note that having a 2-step context-switch as the default does not prevent \CFA from offering a 1-step context-switch (akin to the Microsoft \code{SwitchToFiber}~\cite{switchToWindows} routine). This option is not currently present in \CFA, but the changes required to add it are strictly additive.
137
138\subsection{Preemption} \label{preemption}
139Finally, an important aspect for any complete threading system is preemption. As mentioned in chapter \ref{basics}, preemption introduces an extra degree of uncertainty, which enables users to have multiple threads interleave transparently, rather than having to cooperate among threads for proper scheduling and CPU distribution. Indeed, preemption is desirable because it adds a degree of isolation among threads. In a fully cooperative system, any thread that runs a long loop can starve other threads, while in a preemptive system, starvation can still occur but it does not rely on every thread having to yield or block on a regular basis, which reduces significantly a programmer burden. Obviously, preemption is not optimal for every workload. However any preemptive system can become a cooperative system by making the time slices extremely large. Therefore, \CFA uses a preemptive threading system.
140
141Preemption in \CFA\footnote{Note that the implementation of preemption is strongly tied with the underlying threading system. For this reason, only the Linux implementation is cover, \CFA does not run on Windows at the time of writting} is based on kernel timers, which are used to run a discrete-event simulation. Every processor keeps track of the current time and registers an expiration time with the preemption system. When the preemption system receives a change in preemption, it inserts the time in a sorted order and sets a kernel timer for the closest one, effectively stepping through preemption events on each signal sent by the timer. These timers use the Linux signal {\tt SIGALRM}, which is delivered to the process rather than the kernel-thread. This results in an implementation problem, because when delivering signals to a process, the kernel can deliver the signal to any kernel thread for which the signal is not blocked, i.e.:
142\begin{quote}
143A process-directed signal may be delivered to any one of the threads that does not currently have the signal blocked. If more than one of the threads has the signal unblocked, then the kernel chooses an arbitrary thread to which to deliver the signal.
144SIGNAL(7) - Linux Programmer's Manual
145\end{quote}
146For the sake of simplicity, and in order to prevent the case of having two threads receiving alarms simultaneously, \CFA programs block the {\tt SIGALRM} signal on every kernel thread except one.
147
148Now because of how involuntary context-switches are handled, the kernel thread handling {\tt SIGALRM} cannot also be a processor thread. Hence, involuntary context-switching is done by sending signal {\tt SIGUSR1} to the corresponding proces\-sor and having the thread yield from inside the signal handler. This approach effectively context-switches away from the signal handler back to the kernel and the signal handler frame is eventually unwound when the thread is scheduled again. As a result, a signal handler can start on one kernel thread and terminate on a second kernel thread (but the same user thread). It is important to note that signal handlers save and restore signal masks because user-thread migration can cause a signal mask to migrate from one kernel thread to another. This behaviour is only a problem if all kernel threads, among which a user thread can migrate, differ in terms of signal masks\footnote{Sadly, official POSIX documentation is silent on what distinguishes ``async-signal-safe'' functions from other functions.}. However, since the kernel thread handling preemption requires a different signal mask, executing user threads on the kernel-alarm thread can cause deadlocks. For this reason, the alarm thread is in a tight loop around a system call to \code{sigwaitinfo}, requiring very little CPU time for preemption. One final detail about the alarm thread is how to wake it when additional communication is required (e.g., on thread termination). This unblocking is also done using {\tt SIGALRM}, but sent through the \code{pthread_sigqueue}. Indeed, \code{sigwait} can differentiate signals sent from \code{pthread_sigqueue} from signals sent from alarms or the kernel.
149
150\subsection{Scheduler}
151Finally, an aspect that was not mentioned yet is the scheduling algorithm. Currently, the \CFA scheduler uses a single ready queue for all processors, which is the simplest approach to scheduling. Further discussion on scheduling is present in section \ref{futur:sched}.
152
153% ======================================================================
154% ======================================================================
155\section{Internal Scheduling} \label{impl:intsched}
156% ======================================================================
157% ======================================================================
158The following figure is the traditional illustration of a monitor (repeated from page~\pageref{fig:ClassicalMonitor} for convenience):
159
160\begin{figure}[H]
161\begin{center}
162{\resizebox{0.4\textwidth}{!}{\input{monitor}}}
163\end{center}
164\caption{Traditional illustration of a monitor}
165\end{figure}
166
167This picture has several components, the two most important being the entry queue and the AS-stack. The entry queue is an (almost) FIFO list where threads waiting to enter are parked, while the acceptor/signaller (AS) stack is a FILO list used for threads that have been signalled or otherwise marked as running next.
168
169For \CFA, this picture does not have support for blocking multiple monitors on a single condition. To support \gls{bulk-acq} two changes to this picture are required. First, it is no longer helpful to attach the condition to \emph{a single} monitor. Secondly, the thread waiting on the condition has to be separated across multiple monitors, seen in figure \ref{fig:monitor_cfa}.
170
171\begin{figure}[H]
172\begin{center}
173{\resizebox{0.8\textwidth}{!}{\input{int_monitor}}}
174\end{center}
175\caption{Illustration of \CFA Monitor}
176\label{fig:monitor_cfa}
177\end{figure}
178
179This picture and the proper entry and leave algorithms (see listing \ref{lst:entry2}) is the fundamental implementation of internal scheduling. Note that when a thread is moved from the condition to the AS-stack, it is conceptually split into N pieces, where N is the number of monitors specified in the parameter list. The thread is woken up when all the pieces have popped from the AS-stacks and made active. In this picture, the threads are split into halves but this is only because there are two monitors. For a specific signalling operation every monitor needs a piece of thread on its AS-stack.
180
181\begin{figure}[b]
182\begin{multicols}{2}
183Entry
184\begin{pseudo}
185if monitor is free
186        enter
187elif already own the monitor
188        continue
189else
190        block
191increment recursion
192
193\end{pseudo}
194\columnbreak
195Exit
196\begin{pseudo}
197decrement recursion
198if recursion == 0
199        if signal_stack not empty
200                set_owner to thread
201                if all monitors ready
202                        wake-up thread
203
204        if entry queue not empty
205                wake-up thread
206\end{pseudo}
207\end{multicols}
208\begin{pseudo}[caption={Entry and exit routine for monitors with internal scheduling},label={lst:entry2}]
209\end{pseudo}
210\end{figure}
211
212The solution discussed in \ref{intsched} can be seen in the exit routine of listing \ref{lst:entry2}. Basically, the solution boils down to having a separate data structure for the condition queue and the AS-stack, and unconditionally transferring ownership of the monitors but only unblocking the thread when the last monitor has transferred ownership. This solution is deadlock safe as well as preventing any potential barging. The data structures used for the AS-stack are reused extensively for external scheduling, but in the case of internal scheduling, the data is allocated using variable-length arrays on the call stack of the \code{wait} and \code{signal_block} routines.
213
214\begin{figure}[H]
215\begin{center}
216{\resizebox{0.8\textwidth}{!}{\input{monitor_structs.pstex_t}}}
217\end{center}
218\caption{Data structures involved in internal/external scheduling}
219\label{fig:structs}
220\end{figure}
221
222Figure \ref{fig:structs} shows a high-level representation of these data structures. The main idea behind them is that, a thread cannot contain an arbitrary number of intrusive ``next'' pointers for linking onto monitors. The \code{condition node} is the data structure that is queued onto a condition variable and, when signalled, the condition queue is popped and each \code{condition criterion} is moved to the AS-stack. Once all the criteria have been popped from their respective AS-stacks, the thread is woken up, which is what is shown in listing \ref{lst:entry2}.
223
224% ======================================================================
225% ======================================================================
226\section{External Scheduling}
227% ======================================================================
228% ======================================================================
229Similarly to internal scheduling, external scheduling for multiple monitors relies on the idea that waiting-thread queues are no longer specific to a single monitor, as mentioned in section \ref{extsched}. For internal scheduling, these queues are part of condition variables, which are still unique for a given scheduling operation (i.e., no signal statement uses multiple conditions). However, in the case of external scheduling, there is no equivalent object which is associated with \code{waitfor} statements. This absence means the queues holding the waiting threads must be stored inside at least one of the monitors that is acquired. These monitors being the only objects that have sufficient lifetime and are available on both sides of the \code{waitfor} statement. This requires an algorithm to choose which monitor holds the relevant queue. It is also important that said algorithm be independent of the order in which users list parameters. The proposed algorithm is to fall back on monitor lock ordering (sorting by address) and specify that the monitor that is acquired first is the one with the relevant waiting queue. This assumes that the lock acquiring order is static for the lifetime of all concerned objects but that is a reasonable constraint.
230
231This algorithm choice has two consequences:
232\begin{itemize}
233        \item The queue of the monitor with the lowest address is no longer a true FIFO queue because threads can be moved to the front of the queue. These queues need to contain a set of monitors for each of the waiting threads. Therefore, another thread whose set contains the same lowest address monitor but different lower priority monitors may arrive first but enter the critical section after a thread with the correct pairing.
234        \item The queue of the lowest priority monitor is both required and potentially unused. Indeed, since it is not known at compile time which monitor is the monitor which has the lowest address, every monitor needs to have the correct queues even though it is possible that some queues go unused for the entire duration of the program, for example if a monitor is only used in a specific pair.
235\end{itemize}
236Therefore, the following modifications need to be made to support external scheduling:
237\begin{itemize}
238        \item The threads waiting on the entry queue need to keep track of which routine they are trying to enter, and using which set of monitors. The \code{mutex} routine already has all the required information on its stack, so the thread only needs to keep a pointer to that information.
239        \item The monitors need to keep a mask of acceptable routines. This mask contains for each acceptable routine, a routine pointer and an array of monitors to go with it. It also needs storage to keep track of which routine was accepted. Since this information is not specific to any monitor, the monitors actually contain a pointer to an integer on the stack of the waiting thread. Note that if a thread has acquired two monitors but executes a \code{waitfor} with only one monitor as a parameter, setting the mask of acceptable routines to both monitors will not cause any problems since the extra monitor will not change ownership regardless. This becomes relevant when \code{when} clauses affect the number of monitors passed to a \code{waitfor} statement.
240        \item The entry/exit routines need to be updated as shown in listing \ref{lst:entry3}.
241\end{itemize}
242
243\subsection{External Scheduling - Destructors}
244Finally, to support the ordering inversion of destructors, the code generation needs to be modified to use a special entry routine. This routine is needed because of the storage requirements of the call order inversion. Indeed, when waiting for the destructors, storage is needed for the waiting context and the lifetime of said storage needs to outlive the waiting operation it is needed for. For regular \code{waitfor} statements, the call stack of the routine itself matches this requirement but it is no longer the case when waiting for the destructor since it is pushed on to the AS-stack for later. The \code{waitfor} semantics can then be adjusted correspondingly, as seen in listing \ref{lst:entry-dtor}
245
246\begin{figure}
247\begin{multicols}{2}
248Entry
249\begin{pseudo}
250if monitor is free
251        enter
252elif already own the monitor
253        continue
254elif matches waitfor mask
255        push criteria to AS-stack
256        continue
257else
258        block
259increment recursion
260\end{pseudo}
261\columnbreak
262Exit
263\begin{pseudo}
264decrement recursion
265if recursion == 0
266        if signal_stack not empty
267                set_owner to thread
268                if all monitors ready
269                        wake-up thread
270                endif
271        endif
272
273        if entry queue not empty
274                wake-up thread
275        endif
276\end{pseudo}
277\end{multicols}
278\begin{pseudo}[caption={Entry and exit routine for monitors with internal scheduling and external scheduling},label={lst:entry3}]
279\end{pseudo}
280\end{figure}
281
282\begin{figure}
283\begin{multicols}{2}
284Destructor Entry
285\begin{pseudo}
286if monitor is free
287        enter
288elif already own the monitor
289        increment recursion
290        return
291create wait context
292if matches waitfor mask
293        reset mask
294        push self to AS-stack
295        baton pass
296else
297        wait
298increment recursion
299\end{pseudo}
300\columnbreak
301Waitfor
302\begin{pseudo}
303if matching thread is already there
304        if found destructor
305                push destructor to AS-stack
306                unlock all monitors
307        else
308                push self to AS-stack
309                baton pass
310        endif
311        return
312endif
313if non-blocking
314        Unlock all monitors
315        Return
316endif
317
318push self to AS-stack
319set waitfor mask
320block
321return
322\end{pseudo}
323\end{multicols}
324\begin{pseudo}[caption={Pseudo code for the \code{waitfor} routine and the \code{mutex} entry routine for destructors},label={lst:entry-dtor}]
325\end{pseudo}
326\end{figure}
Note: See TracBrowser for help on using the repository browser.