source: doc/theses/colby_parsons_MMAth/text/waituntil.tex @ ba068c0

% ======================================================================
% ======================================================================
\chapter{Waituntil}\label{s:waituntil}
% ======================================================================
% ======================================================================

Consider the following motivating problem.
There are $N$ stalls (resources) in a bathroom and there are $M$ people (threads) using the bathroom.
Each stall has its own lock since only one person may occupy a stall at a time.
Humans solve this problem in the following way.
They check if all of the stalls are occupied.
If not, they enter and claim an available stall.
If they are all occupied, people queue and watch the stalls until one is free, and then enter and lock the stall.
This solution can be implemented on a computer easily, if all threads are waiting on all stalls and agree to queue.

Now the problem is extended.
Some stalls are wheelchair accessible and some stalls have gender identification.
Each person (thread) may be limited to only one kind of stall or may choose among different kinds of stalls that match their criteria.
Immediately, the problem becomes more difficult.
A single queue no longer solves the problem.
What happens when there is a stall available that the person at the front of the queue cannot choose?
The na\"ive solution has each thread spin indefinitely continually checking every matching kind of stall(s) until a suitable one is free.
This approach is insufficient since it wastes cycles and results in unfairness among waiting threads as a thread can acquire the first matching stall without regard to the waiting time of other threads.
Waiting for the first appropriate stall (resource) that becomes available without spinning is an example of \gls{synch_multiplex}: the ability to wait synchronously for one or more resources based on some selection criteria.

\section{History of Synchronous Multiplexing}\label{s:History}

There is a history of tools that provide \gls{synch_multiplex}.
Some well known \gls{synch_multiplex} tools include Unix system utilities: @select@~\cite{linux:select}, @poll@~\cite{linux:poll}, and @epoll@~\cite{linux:epoll}, and the @select@ statement provided by Go~\cite{go:selectref}, Ada~\cite[\S~9.7]{Ada16}, and \uC~\cite[\S~3.3.1]{uC++}.
The concept and theory surrounding \gls{synch_multiplex} was introduced by Hoare in his 1985 book, Communicating Sequential Processes (CSP)~\cite{Hoare85},
\begin{quote}
A communication is an event that is described by a pair $c.v$ where $c$ is the name of the channel on which the communication takes place and $v$ is the value of the message which passes.~\cite[p.~113]{Hoare85}
\end{quote}
The ideas in CSP were implemented by Roscoe and Hoare in the language Occam~\cite{Roscoe88}.

Both CSP and Occam include the ability to wait for a \Newterm{choice} among receiver channels and \Newterm{guards} to toggle which receives are valid.
For example,
\begin{cfa}[mathescape]
(@G1@(x) $\rightarrow$ P @|@ @G2@(y) $\rightarrow$ Q )
\end{cfa}
waits for either channel @x@ or @y@ to have a value, if and only if guards @G1@ and @G2@ are true;
if only one guard is true, only one channel receives, and if both guards are false, no receive occurs.
% extended CSP with a \gls{synch_multiplex} construct @ALT@, which waits for one resource to be available and then executes a corresponding block of code.
In detail, waiting for one resource out of a set of resources can be thought of as a logical exclusive-or over the set of resources.
Guards are a conditional operator similar to an @if@, except they apply to the resource being waited on.
If a guard is false, then the resource it guards is not in the set of resources being waited on.
If all guards are false, the ALT, Occam's \gls{synch_multiplex} statement, does nothing and the thread continues.
Guards can be simulated using @if@ statements as shown in~\cite[rule~2.4, p~183]{Roscoe88}
\begin{lstlisting}[basicstyle=\rm,mathescape]
ALT( $b$ & $g$ $P$, $G$ ) = IF ( $b$ ALT($\,g$ $P$, $G$ ), $\neg\,$b ALT( $G$ ) )                        (boolean guard elim).
\end{lstlisting}
but require $2^N-1$ @if@ statements, where $N$ is the number of guards.
The exponential blowup comes from applying rule 2.4 repeatedly, since it works on one guard at a time.
Figure~\ref{f:wu_if} shows in \CFA an example of applying rule 2.4 for three guards.
Also, notice the additional code duplication for statements @S1@, @S2@, and @S3@.

\begin{figure}
\centering
\begin{lrbox}{\myboxA}
\begin{cfa}
when( G1 )
        waituntil( R1 ) S1 
or when( G2 )
        waituntil( R2 ) S2
or when( G3 )
        waituntil( R3 ) S3







\end{cfa}
\end{lrbox}

\begin{lrbox}{\myboxB}
\begin{cfa}
if ( G1 )
        if ( G2 )
                if ( G3 ) waituntil( R1 ) S1 or waituntil( R2 ) S2 or waituntil( R3 ) S3
                else waituntil( R1 ) S1 or waituntil( R2 ) S2
        else
                if ( G3 ) waituntil( R1 ) S1 or waituntil( R3 ) S3
                else waituntil( R1 ) S1
else
        if ( G2 )
                if ( G3 ) waituntil( R2 ) S2 or waituntil( R3 ) S3
                else waituntil( R2 ) S2
        else
                if ( G3 ) waituntil( R3 ) S3
\end{cfa}
\end{lrbox}

\subfloat[Guards]{\label{l:guards}\usebox\myboxA}
\hspace*{5pt}
\vrule
\hspace*{5pt}
\subfloat[Simulated Guards]{\label{l:simulated_guards}\usebox\myboxB}
\caption{\CFA guard simulated with \lstinline{if} statement.}
\label{f:wu_if}
\end{figure}

When discussing \gls{synch_multiplex} implementations, the resource being multiplexed is important.
While CSP waits on channels, the earliest known implementation of synch\-ronous multiplexing is Unix's @select@~\cite{linux:select}, multiplexing over file descriptors, which conceptually differ from channels in name only.
The @select@ system-call is passed three sets of file descriptors (read, write, exceptional) to wait on and an optional timeout.
@select@ blocks until either some subset of file descriptors are available or the timeout expires.
All file descriptors that are ready are returned by modifying the argument sets to only contain the ready descriptors.

This early implementation differs from the theory presented in CSP: when the call from @select@ returns it may provide more than one ready file descriptor.
As such, @select@ has logical-or multiplexing semantics, whereas the theory described exclusive-or semantics.
It is possible to achieve exclusive-or semantics with @select@ by arbitrarily operating on only one of the returned descriptors.
@select@ passes the interest set of file descriptors between application and kernel in the form of a worst-case sized bit-mask, where the worst-case is the largest numbered file descriptor.
@poll@ reduces the size of the interest sets changing from a bit mask to a linked data structure, independent of the file-descriptor values.
@epoll@ further reduces the data passed per call by keeping the interest set in the kernel, rather than supplying it on every call.

These early \gls{synch_multiplex} tools interact directly with the operating system and others are used to communicate among processes.
Later, \gls{synch_multiplex} started to appear in applications, via programming languages, to support fast multiplexed concurrent communication among threads.
An early example of \gls{synch_multiplex} is the @select@ statement in Ada~\cite[\S~9.7]{Ichbiah79}.
This @select@ allows a task object, with their own threads, to multiplex over a subset of asynchronous calls to its methods.
The Ada @select@ has the same exclusive-or semantics and guards as Occam ALT;
however, it multiplexes over methods rather than channels.

\begin{figure}
\begin{lstlisting}[language=ada,literate=,{moredelim={**[is][\color{red}]{@}{@}}}]
task type buffer is -- thread type
        ... -- buffer declarations
        count : integer := 0;
begin -- thread starts here
        loop
                select
                        @when count < Size@ => -- guard
                        @accept insert( elem : in ElemType )@ do  -- method
                                ... -- add to buffer
                                count := count + 1;
                        end;
                        -- executed if this accept called
                or
                        @when count > 0@ => -- guard
                        @accept remove( elem : out ElemType )@ do  -- method
                                ... --remove and return from buffer via parameter
                                count := count - 1;
                        end;
                        -- executed if this accept called
                or @delay 10.0@;  -- unblock after 10 seconds without call
                or @else@ -- do not block, cannot appear with delay
                end select;
        end loop;
end buffer;
var buf : buffer; -- create task object and start thread in task body
\end{lstlisting}
\caption{Ada Bounded Buffer}
\label{f:BB_Ada}
\end{figure}

Figure~\ref{f:BB_Ada} shows the outline of a bounded buffer implemented with an Ada task.
Note that a task method is associated with the \lstinline[language=ada]{accept} clause of the \lstinline[language=ada]{select} statement, rather than being a separate routine.
The thread executing the loop in the task body blocks at the \lstinline[language=ada]{select} until a call occurs to @insert@ or @remove@.
Then the appropriate \lstinline[language=ada]{accept} method is run with the called arguments.
Hence, the \lstinline[language=ada]{select} statement provides rendezvous points for threads, rather than providing channels with message passing.
The \lstinline[language=ada]{select} statement also provides a timeout and @else@ (nonblocking), which changes synchronous multiplexing to asynchronous.
Now the thread polls rather than blocks.

Another example of programming-language \gls{synch_multiplex} is Go using a @select@ statement with channels~\cite{go:selectref}.
Figure~\ref{l:BB_Go} shows the outline of a bounded buffer administrator implemented with a Go routine.
Here two channels are used for inserting and removing by client producers and consumers, respectively.
(The @done@ channel is used to synchronize with the program main.)
Go's @select@ has the same exclusive-or semantics as the ALT primitive from Occam and associated code blocks for each clause like ALT and Ada.
However, unlike Ada and ALT, Go does not provide guards for the \lstinline[language=go]{case} clauses of the \lstinline[language=go]{select}.
As such, the exponential blowup can be seen comparing Go and \uC in Figure~\label{f:AdaMultiplexing}.
Go also provides a timeout via a channel and a @default@ clause like Ada @else@ for asynchronous multiplexing.

\begin{figure}
\centering

\begin{lrbox}{\myboxA}
\begin{lstlisting}[language=go,literate=,{moredelim={**[is][\color{red}]{@}{@}}}]
insert := make( chan int )
remove := make( chan * int )
buffer := make( chan int Size )
done := make( chan int )
count := 0
func in_buf( int val ) {
        buffer <- val
        count++
}
func out_buf( int * ptr ) {
        *ptr := <-buffer
        count--
}
func BoundedBuffer {
        L: for {
                if ( count < Size && count > 0 ) {
                        select { // wait for message
                                @case i := <- insert: in_buf( i )@
                                @case p := <- remove: out_buf( p )@
                                case <- done: break L
                        }
                } else if ( count < Size ) {
                        select { // wait for message
                                @case i := <- insert: in_buf( i )@
                                case <- done: break L
                        }
                } else ( count > 0 ) {
                        select { // wait for message
                                @case p := <- remove: out_buf( p )@
                                case <- done: break L;
                        }
                }
        }
        done <- 0
}
func main() {
        go BoundedBuffer() // start administrator
}
\end{lstlisting}
\end{lrbox}

\begin{lrbox}{\myboxB}
\begin{lstlisting}[language=uC++,{moredelim={**[is][\color{red}]{@}{@}}}]












_Task BoundedBuffer {
        int * buffer;
        int front = back = count = 0;
  public:
        // ... constructor implementation
        void insert( int elem ) {
                buffer[front] = elem;
                front = ( front + 1 ) % Size;
                count += 1;
        }
        int remove() {
                int ret = buffer[back];
                back = ( back + 1 ) % Size;
                count -= 1;
                return ret;
        }
  private:
        void main() {
                for ( ;; ) {
                        _Accept( ~buffer ) break;
                        @or _When ( count < Size ) _Accept( insert )@;
                        @or _When ( count > 0 ) _Accept( remove )@;
                }
        }
};
buffer buf; // start thread in main method
\end{lstlisting}
\end{lrbox}

\subfloat[Go]{\label{l:BB_Go}\usebox\myboxA}
\hspace*{5pt}
\vrule
\hspace*{5pt}
\subfloat[\uC]{\label{l:BB_uC++}\usebox\myboxB}

\caption{Bounded Buffer}
\label{f:AdaMultiplexing}
\end{figure}

Finally, \uC provides \gls{synch_multiplex} with Ada-style @select@ over monitor and task methods with the @_Accept@ statement~\cite[\S~2.9.2.1]{uC++}, and over futures with the @_Select@ statement~\cite[\S~3.3.1]{uC++}.
The @_Select@ statement extends the ALT/Go @select@ by offering both @and@ and @or@ semantics, which can be used together in the same statement.
Both @_Accept@ and @_Select@ statements provide guards for multiplexing clauses, as well as, timeout, and @else@ clauses.
Figure~\ref{l:BB_uC++} shows the outline of a bounded buffer administrator implemented with \uC @_Accept@ statements.

There are other languages that provide \gls{synch_multiplex}, including Rust's @select!@ over futures~\cite{rust:select}, Java's @allof@/@anyof@ over futures~\cite{java:allof:anyof}, OCaml's @select@ over channels~\cite{ocaml:channel}, and C++14's @when_any@ over futures~\cite{cpp:whenany}.
Note that while C++14 and Rust provide \gls{synch_multiplex}, the implementations leave much to be desired as both rely on polling to wait on multiple resources.

\section{Other Approaches to Synchronous Multiplexing}

To avoid the need for \gls{synch_multiplex}, all communication among threads/processes must come from a single source.
For example, in Erlang each process has a single heterogeneous mailbox that is the sole source of concurrent communication, removing the need for \gls{synch_multiplex} as there is only one place to wait on resources.
Similar, actor systems circumvent the \gls{synch_multiplex} problem as actors only block when waiting for the next message never in a behaviour.
While these approaches solve the \gls{synch_multiplex} problem, they introduce other issues.
Consider the case where a thread has a single source of communication and it wants a set of $N$ resources.
It must sequentially request the $N$ resources and wait for each response.
During the receives for the $N$ resources, it can receive other communication, and has to save and postpone these communications, or discard them.
% If the requests for the other resources need to be retracted, the burden falls on the programmer to determine how to synchronize appropriately to ensure that only one resource is delivered.

\section{\CFA's Waituntil Statement}

The new \CFA \gls{synch_multiplex} utility introduced in this work is the @waituntil@ statement.
There already exists a @waitfor@ statement in \CFA that supports Ada-style \gls{synch_multiplex} over monitor methods~\cite{Delisle21}, so this @waituntil@ focuses on synchronizing over other resources.
All of the \gls{synch_multiplex} features mentioned so far are monomorphic, only waiting on one kind of resource: Unix @select@ supports file descriptors, Go's @select@ supports channel operations, \uC's @select@ supports futures, and Ada's @select@ supports monitor method calls.
The \CFA @waituntil@ is polymorphic and provides \gls{synch_multiplex} over any objects that satisfy the trait in Figure~\ref{f:wu_trait}.
No other language provides a synchronous multiplexing tool polymorphic over resources like \CFA's @waituntil@.

\begin{figure}
\begin{cfa}
forall(T & | sized(T))
trait is_selectable {
        // For registering a waituntil stmt on a selectable type
        bool register_select( T &, select_node & );

        // For unregistering a waituntil stmt from a selectable type
        bool unregister_select( T &, select_node & );

        // on_selected is run on the selecting thread prior to executing
        // the statement associated with the select_node
        bool on_selected( T &, select_node & );
};
\end{cfa}
\caption{Trait for types that can be passed into \CFA's \lstinline{waituntil} statement.}
\label{f:wu_trait}
\end{figure}

Currently locks, channels, futures and timeouts are supported by the @waituntil@ statement, and this set can be expanded through the @is_selectable@ trait as other use-cases arise.
The @waituntil@ statement supports guard clauses, both @or@ and @and@ semantics, and timeout and @else@ for asynchronous multiplexing.
Figure~\ref{f:wu_example} shows a \CFA @waituntil@ usage, which is waiting for either @Lock@ to be available \emph{or} for a value to be read from @Channel@ into @i@ \emph{and} for @Future@ to be fulfilled \emph{or} a timeout of one second. 
Note that the expression inside a @waituntil@ clause is evaluated once at the start of the @waituntil@ algorithm.

\section{Waituntil Semantics}

The @waituntil@ semantics has two parts: the semantics of the statement itself, \ie @and@, @or@, @when@ guards, and @else@ semantics, and the semantics of how the @waituntil@ interacts with types like locks, channels, and futures.

\subsection{Statement Semantics}

The @or@ semantics are the most straightforward and nearly match those laid out in the ALT statement from Occam.
The clauses have an exclusive-or relationship where the first available one is run and only one clause is run.
\CFA's @or@ semantics differ from ALT semantics: instead of randomly picking a clause when multiple are available, the first clause in the @waituntil@ that is available is executed.
For example, in the following example, if @foo@ and @bar@ are both available, @foo@ is always selected since it comes first in the order of @waituntil@ clauses.
\begin{cfa}
future(int) bar, foo;
waituntil( foo ) { ... } or waituntil( bar ) { ... } // prioritize foo
\end{cfa}
The reason for these semantics is that prioritizing resources can be useful in certain problems, such as shutdown.
In the rare case where there is a starvation problem with the ordering, it possible to follow a @waituntil@ with its reverse form, alternating which resource has the highest priority:
\begin{cfa}
waituntil( foo ) { ... } or waituntil( bar ) { ... } // prioritize foo
waituntil( bar ) { ... } or waituntil( foo ) { ... } // prioritize bar
\end{cfa}
While this approach is not general for many resources, it handles many basic cases.

\begin{figure}
\begin{cfa}
future(int) Future;
channel(int) Channel;
owner_lock Lock;
int i = 0;

waituntil( @Lock@ ) { ... }
or when( i == 0 ) waituntil( i << @Channel@ ) { ... }
and waituntil( @Future@ ) { ... }
or waituntil( @timeout( 1`s )@ ) { ... }
// else { ... }
\end{cfa}
\caption{Example of \CFA's waituntil statement}
\label{f:wu_example}
\end{figure}

The \CFA @and@ semantics match the @and@ semantics of \uC \lstinline[language=uC++]{_Select}.
When multiple clauses are joined by @and@, the @waituntil@ makes a thread wait for all to be available, but still runs the corresponding code blocks \emph{as they become available}.
When an @and@ clause becomes available, the waiting thread unblocks and runs that clause's code-block, and then the thread waits again for the next available clause or the @waituntil@ statement is now satisfied.
This semantics allows work to be done in parallel while synchronizing over a set of resources, and furthermore, gives a good reason to use the @and@ operator.
If the @and@ operator waited for all clauses to be available before running, it is the same as just acquiring those resources consecutively by a sequence of @waituntil@ statements.

As with normal C expressions, the @and@ operator binds more tightly than the @or@.
To give an @or@ operator higher precedence, parenthesis are used.
For example, the following @waituntil@ unconditionally waits for @C@ and one of either @A@ or @B@, since the @or@ is given higher precedence via parenthesis.
\begin{cfa}
@(@ waituntil( A ) { ... }              // bind tightly to or
or waituntil( B ) { ... } @)@
and waituntil( C ) { ... }
\end{cfa}

The guards in the @waituntil@ statement are called @when@ clauses.
Each boolean expression inside a @when@ is evaluated \emph{once} before the @waituntil@ statement is run.
Like Occam's ALT, the guards toggle clauses on and off, where a @waituntil@ clause is only evaluated and waited on if the corresponding guard is @true@.
In addition, the @waituntil@ guards require some nuance since both @and@ and @or@ operators are supported \see{Section~\ref{s:wu_guards}}.
When a guard is false and a clause is removed, it can be thought of as removing that clause and its preceding operation from the statement.
For example, in the following, the two @waituntil@ statements are semantically equivalent.

\begin{lrbox}{\myboxA}
\begin{cfa}
when( true ) waituntil( A ) { ... }
or when( false ) waituntil( B ) { ... }
and waituntil( C ) { ... }
\end{cfa}
\end{lrbox}

\begin{lrbox}{\myboxB}
\begin{cfa}
waituntil( A ) { ... }
and waituntil( C ) { ... }

\end{cfa}
\end{lrbox}

\begin{tabular}{@{}lcl@{}}
\usebox\myboxA & $\equiv$ & \usebox\myboxB
\end{tabular}

The @else@ clause on the @waituntil@ has identical semantics to the @else@ clause in Ada.
If all resources are not immediately available and there is an @else@ clause, the @else@ clause is run and the thread continues.

\subsection{Type Semantics}

As mentioned, to support interaction with the @waituntil@ statement a type must support the trait in Figure~\ref{f:wu_trait}.
The @waituntil@ statement expects types to register and unregister themselves via calls to @register_select@ and @unregister_select@, respectively.
When a resource becomes available, @on_selected@ is run, and if it returns false, the corresponding code block is not run.
Many types do not need @on_selected@, but it is provided if a type needs to perform work or checks before the resource can be accessed in the code block.
The register/unregister routines in the trait also return booleans.
The return value of @register_select@ is @true@, if the resource is immediately available and @false@ otherwise.
The return value of @unregister_select@ is @true@, if the corresponding code block should be run after unregistration and @false@ otherwise.
The routine @on_selected@ and the return value of @unregister_select@ are needed to support channels as a resource.
More detail on channels and their interaction with @waituntil@ appear in Section~\ref{s:wu_chans}.

The trait can be used directly by having a blocking object support the @is_selectable@ trait, or it can be used indirectly through routines that take the object as an argument.
When used indirectly, the object's routine returns a type that supports the @is_selectable@ trait.
This feature leverages \CFA's ability to overload on return type to select the correct overloaded routine for the @waituntil@ context.
Indirect support through routines is needed for types that want to support multiple operations such as channels that allow both reading and writing.

\section{\lstinline{waituntil} Implementation}

The @waituntil@ statement is not inherently complex, and Figure~\ref{f:WU_Impl} shows the basic outline of the @waituntil@ algorithm.
Complexity comes from the consideration of race conditions and synchronization needed when supporting various primitives.
The following sections use examples to fill in complexity details missing in Figure~\ref{f:WU_Impl}.
After which, the full pseudocode for the @waituntil@ algorithm is presented in Figure~\ref{f:WU_Full_Impl}.

\begin{figure}
\begin{cfa}
select_nodes s[N];                                                              $\C[3.25in]{// declare N select nodes}$
for ( node in s )                                                               $\C{// register nodes}$
        register_select( resource, node );
while ( statement predicate not satisfied ) {   $\C{// check predicate}$
        // block until clause(s) satisfied
        for ( resource in waituntil statement ) {       $\C{// run true code blocks}$
                if ( resource is avail ) run code block
                if ( statement predicate is satisfied ) break;
        }
}
for ( node in s )                                                               $\C{// deregister nodes}\CRT$
        if ( unregister_select( resource, node ) ) run code block
\end{cfa}
\caption{\lstinline{waituntil} Implementation}
\label{f:WU_Impl}
\end{figure}

The basic steps of the algorithm are:
\begin{enumerate}
\item
The @waituntil@ statement declares $N$ @select_node@s, one per resource that is being waited on, which stores any @waituntil@ data pertaining to that resource.

\item
Each @select_node@ is then registered with the corresponding resource.

\item
The thread executing the @waituntil@ then loops until the statement's predicate is satisfied.
In each iteration, if the predicate is unsatisfied, the @waituntil@ thread blocks.
When another thread satisfies a resource clause (\eg sends to a  channel), it unblocks the @waituntil@ thread.
This thread checks all clauses for completion, and any completed clauses have their code blocks run.
While checking clause completion, if enough clauses have been run such that the statement predicate is satisfied, the loop exits early.

\item
Once the thread escapes the loop, the @select_nodes@ are unregistered from the resources.
\end{enumerate}
These steps give a basic overview of how the statement works.
The following sections shed light on the specific changes and provide more implementation detail.

\subsection{Locks}\label{s:wu_locks}

The \CFA runtime supports a number of spinning and blocking locks, \eg semaphore, MCS, futex, Go mutex, spinlock, owner, \etc.
Many of these locks satisfy the @is_selectable@ trait, and hence, are resources supported by the @waituntil@ statement.
For example, the following waits until the thread has acquired lock @l1@ or locks @l2@ and @l3@.
\begin{cfa}
owner_lock l1, l2, l3;
waituntil ( l1 ) { ... }
or waituntil( l2 ) { ... }
and waituntil( l3 ) { ... }
\end{cfa}
Implicitly, the @waituntil@ is calling the lock acquire for each of these locks to establish a position in the lock's queue of waiting threads.
When the lock schedules this thread, it unblocks and runs the code block associated with the lock and then releases the lock.

In detail, when a thread waits on multiple locks via a @waituntil@, it enqueues a @select_node@ in each of the lock's waiting queues.
When a @select_node@ reaches the front of the lock's queue and gains ownership, the thread blocked on the @waituntil@ is unblocked.
Now, the lock is held by the @waituntil@ thread until the code block is executed, and then the node is unregistered, during which the lock is released.
Immediately releasing the lock after the code block prevents the waiting thread from holding multiple locks and potentially introducing a deadlock.
As such, the only unregistered nodes associated with locks are the ones that have not run.

\subsection{Timeouts}

A timeout for the @waituntil@ statement is a duration passed to routine \lstinline[deletekeywords={timeout}]{timeout}\footnote{\lstinline{timeout} is a quasi-keyword in \CFA, allowing it to be used an identifier.}, \eg:
\begin{cquote}
\begin{tabular}{@{}l|l@{}}
\multicolumn{2}{@{}l@{}}{\lstinline{Duration D1\{ 1`ms \}, D2\{ 2`ms \}, D3\{ 3`ms \};}} \\
\begin{cfa}[deletekeywords={timeout}]
waituntil( i << C1 ) {}
or waituntil( i << C2 ) {}
or waituntil( i << C3 ) {}
or waituntil( timeout( D1 ) ) {}
or waituntil( timeout( D2 ) ) {}
or waituntil( timeout( D3 ) ) {}
\end{cfa}
&
\begin{cfa}[deletekeywords={timeout}]
waituntil( i << C1 ) {}
or waituntil( i << C2 ) {}
or waituntil( i << C3 ) {}
or waituntil( timeout( min( D1, D2, D3 ) ) ) {}


\end{cfa}
\end{tabular}
\end{cquote}
These two examples are basically equivalent.
Here, the multiple timeouts are useful because the durations can change during execution and the separate clauses provide different code blocks if a timeout triggers.
Multiple timeouts can also be used with @and@ to provide a minimal delay before proceeding.
In following example, either channel @C1@ or @C2@ must be satisfied but nothing can be done for at least 1 or 3 seconds after the channel read, respectively.
\begin{cfa}[deletekeywords={timeout}]
waituntil( i << C1 ); and waituntil( timeout( 1`s ) );
or waituntil( i << C2 ); and waituntil( timeout( 3`s ) );
\end{cfa}
If only @C2@ is satisfied, \emph{both} timeout code-blocks trigger because 1 second occurs before 3 seconds.
Note that the \CFA @waitfor@ statement only provides a single @timeout@ clause because it only supports @or@ semantics.

The \lstinline[deletekeywords={timeout}]{timeout} routine is different from UNIX @sleep@, which blocks for the specified duration and returns the amount of time elapsed since the call started.
Instead, \lstinline[deletekeywords={timeout}]{timeout} returns a type that supports the @is_selectable@ trait, allowing the type system to select the correct overloaded routine for this context.
For the @waituntil@, it is more idiomatic for the \lstinline[deletekeywords={timeout}]{timeout} to use the same syntax as other blocking operations instead of having a special language clause.

\subsection{Channels}\label{s:wu_chans}

Channels require more complexity to allow synchronous multiplexing.
For locks, when an outside thread releases a lock and unblocks the @waituntil@ thread (WUT), the lock's MX property is passed to the WUT (no spinning locks).
For futures, the outside thread deliveries a value to the future and unblocks any waiting threads, including WUTs.
In either case, after the WUT unblocks, it is safe to execute its corresponding code block knowing access to the resource is protected by the lock or the read-only state of the future.
Similarly, for channels, when an outside thread inserts a value into a channel, it must unblock the WUT.
However, for channels, there is a race condition that poses an issue.
If the outside thread inserts into the channel and unblocks the WUT, there is a race where another thread can remove the channel data, so after the WUT unblocks and attempts to remove from the buffer, it fails, and the WUT must reblock (busy waiting).
This scenario is a \gls{toctou} race that needs to be consolidated.
To close the race, the outside thread must detect this case and insert directly into the left-hand side of the channel expression (@i << chan@) rather than into the channel, and then unblock the WUT.
Now the unblocked WUT is guaranteed to have a satisfied resource and its code block can safely executed.
The insertion circumvents the channel buffer via the wait-morphing in the \CFA channel implementation \see{Section~\ref{s:chan_impl}}, allowing @waituntil@ channel unblocking to not be special-cased.

Furthermore, if both @and@ and @or@ operators are used, the @or@ operations stop behaving like exclusive-or due to the race among channel operations, \eg:
\begin{cfa}
int i;
waituntil( i << A ) {} and waituntil( i << B ) {}
or waituntil( i << C ) {} and waituntil( i << D ) {}
\end{cfa}
If exclusive-or semantics are followed, only the code blocks for @A@ and @B@ are run, or the code blocks for @C@ and @D@.
However, four outside threads inserting into each channel can simultaneously put values into @i@ and attempt to unblock the WUT to run the four code-blocks.
This case introduces a race with complexity that increases with the size of the @waituntil@ statement.
However, due to TOCTOU issues, it is impossible to know if all resources are available without acquiring all the internal locks of channels in the subtree of the @waituntil@ clauses.
This approach is a poor solution for two reasons.
It is possible that once all the locks are acquired, the subtree is not satisfied and the locks must be released.
This work incurs a high cost for signalling threads and heavily increase contention on internal channel locks.
Furthermore, the @waituntil@ statement is polymorphic and can support resources that do not have internal locks, which also makes this approach infeasible.
As such, the exclusive-or semantics are lost when using both @and@ and @or@ operators since it cannot be supported without significant complexity and significantly affects @waituntil@ performance.
Therefore, the example of reusing variable @i@ by multiple output channels is considered a user error without exclusive-or semantics.
Given aliasing in C, it is impossible to even warn of the potential race.
In the future, it would be interesting to support Go-like syntax, \lstinline[language=Go]{case i := <- ...}, defining a new scoped @i@ variable for each clause.

It was deemed important that exclusive-or semantics are maintained when only @or@ operators are used, so this situation has been special-cased, and is handled by having all clauses race to set a value \emph{before} operating on the channel.
Consider the following example where thread 1 is reading and threads 2 and 3 are writing to channels @A@ and @B@ concurrently.
\begin{cquote}
\begin{tabular}{@{}l|l|l@{}}
\multicolumn{3}{@{}l@{}}{\lstinline{channel(int) A, B; // zero size channels}} \\
thread 1 & thread 2 & thread 3 \\
\begin{cfa}
waituntil( i << A ) {}
or waituntil( i << B ) {}
\end{cfa}
&
\begin{cfa}
A << 1;

\end{cfa}
&
\begin{cfa}
B << 2;

\end{cfa}
\end{tabular}
\end{cquote}
For thread 1 to have exclusive-or semantics, it must only consume from exactly one of @A@ or @B@.
As such, thread 2 and 3 must race to establish the winning clause of the @waituntil@ in thread 1.
This race is consolidated by thread 2 and 3 each attempting to set a pointer to the winning clause's @select_node@ address using \gls{cas}.
The winner bypasses the channel and inserts into the WUT's left-hand, and signals thread 1.
The loser continues checking if there is space in the channel, and if so performs the channel insert operation with a possible signal of a waiting remove thread;
otherwise, if there is no space, the loser blocks.
It is important the race occurs \emph{before} operating on the channel, because channel actions are different with respect to each thread.
If the race was consolidated after the operation, both thread 2 and 3 could potentially write into @i@ concurrently.

Channels introduce another interesting implementation issue.
Supporting both reading and writing to a channel in a @waituntil@ means that one @waituntil@ clause may be the notifier of another @waituntil@ clause.
This conjunction poses a problem when dealing with the special-cased @or@ where the clauses need to win a race to operate on a channel.
Consider the following example, alongside a described ordering of events to highlight the race.
\begin{cquote}
\begin{tabular}{@{}l|l@{}}
\multicolumn{2}{@{}l@{}}{\lstinline{channel(int) A, B; // zero size channels}} \\
thread 1 & thread 2 \\
\begin{cfa}[moredelim={**[is][\color{blue}]{\#}{\#}}]
waituntil( @i << A@ ) {}
or waituntil( #i << B# ) {}
\end{cfa}
&
\begin{cfa}[moredelim={**[is][\color{blue}]{\#}{\#}}]
waituntil( #B << 2# ) {}
or waituntil( @A << 1@ ) {}
\end{cfa}
\end{tabular}
\end{cquote}
Assume thread 1 executes first, registers with channel @A@ and proceeds in the @waituntil@.
Since @A@ is empty, thread 1 cannot remove, and then thread 1 is interrupted before registering with @B@.
Thread 2 similarly registers with channel @B@, and proceeds in the @waituntil@.
Since @B@ is zero size there is no space to insert, and then thread 2 is interrupted before registering with @A@.
At this point, thread 1 and 2 resume execution.
Remember from above, each exclusive-or @waituntil@ holds a race to set the winning clause of the statement.
The issue that arises is that these two @waituntil@ statements must have matching winning clauses (both @A@ clauses or both @B@ clauses) to preserve the exclusive-or semantics, since a zero-sized channel needs an insert/remove pair for an operation to occur.
If threads 1 and 2 race to set a winner only in their own @waituntil@, thread 1 can think it successfully removed from @B@, and thread 2 can think it successfully inserted into @A@, which is an error.
Hence, there is a race on two fronts.
If thread 1 wins the race and sees that @B@ has a waiting insertion, then thread 2 must execute the first clause of its @waituntil@ and thread 1 execute its second.
Correspondingly, if thread 2 wins the race and sees that @A@ has a waiting removal, then thread 1 must execute the first clause of its @waituntil@ and thread 2 execute its second.
Any other execution scenario is incorrect for exclusive-or semantics.
Note that priority execution of multiple satisfied @waituntil@ causes (\ie top to bottom) is not violated because, in this scenario, there is only one satisfied clause for either thread.

The Go @select@ solves this problem by acquiring all the internal locks of the channels before registering the @select@ on the channels.
This approach eliminates the race shown above since thread 1 and 2 cannot both be registering at the same time.
However, this approach cannot be used in \CFA, since the @waituntil@ is polymorphic.
Not all types in a @waituntil@ have an internal lock, and when using non-channel types, acquiring all the locks incurs extra unneeded overhead.
Instead, this race is consolidated in \CFA in two phases by having an intermediate pending status value for the race.
This race case is detectable, and if detected, each thread first races to set its own @waituntil@ race pointer to be pending.
If it succeeds, it then attempts to set the other thread's @waituntil@ race pointer to its success value.
If either thread successfully sets the the other thread's @waituntil@ race pointer, then the operation can proceed, if not the signalling threads set its own race pointer back to the initial value and repeats.
This retry mechanism can potentially introduce a livelock, but in practice a livelock here is highly unlikely.
Furthermore, the likelihood of a livelock here is zero unless the program is in the niche case of having two or more exclusive-or @waituntil@s with two or more clauses in reverse order of priority.
This livelock case can be fully eliminated using locks like Go, or if a \gls{dcas} instruction is available.
If any other threads attempt to set a WUT's race pointer and see a pending value, they wait until the value changes before proceeding to ensure that, in the case the WUT fails, the signal is not lost.
This protocol ensures that signals cannot be lost and that the two races can be resolved in a safe manner.
The implementation of this protocol is shown in Figure~\ref{f:WU_DeadlockAvoidance}.

\begin{figure}
\begin{cfa}
bool pending_set_other( select_node & other, select_node & mine ) {
        unsigned long int cmp_status = UNSAT;

        // Try to set other status, if we succeed break and return true
        while( ! CAS( other.clause_status, &cmp_status, SAT ) ) {
                if ( cmp_status == SAT )
                        return false; // If other status is SAT we lost so return false

                // Toggle own status flag to allow other thread to potentially win
                mine.status = UNSAT;

                // Reset compare flag
                cmp_status = UNSAT;

                // Attempt to set own status flag back to PENDING to retry
                if ( ! CAS( mine.clause_status, &cmp_status, PENDING ) )
                        return false; // If we fail then we lost so return false
                
                // Reset compare flag
                cmp_status = UNSAT;
        }
        return true;
}
\end{cfa}
\caption{Exclusive-or \lstinline{waituntil} channel deadlock avoidance protocol}
\label{f:WU_DeadlockAvoidance}
\end{figure}

Channels in \CFA have exception-based shutdown mechanisms that the @waituntil@ statement needs to support.
These exception mechanisms are supported through the @on_selected@ routine.
This routine is needed by channels to detect if they are closed after unblocking in a @waituntil@ statement, to ensure the appropriate behaviour is taken and an exception is thrown.
Hence, the channel close-down mechanism is handled correctly.

\subsection{Guards and Statement Predicate}\label{s:wu_guards}

It is trivial to check when a synchronous multiplexing utility is done for the or/xor relationship, since any resource becoming available means that the blocked thread can proceed and the @waituntil@ statement is finished.
In \uC and \CFA, the \gls{synch_multiplex} mechanism have both an and/or relationship, which along with guards, make the problem of checking for completion of the statement difficult.
Consider the following @waituntil@.
\begin{cfa}
when( GA ) waituntil( A ) {}
and when( GB ) waituntil( B ) {}
or when( GC ) waituntil( C ) {}
\end{cfa}
When the @waituntil@ thread wakes up, the following predicate represents satisfaction:
\begin{cfa}
A && B || C || ! GA && B || ! GB && A || ! GA && ! GB && ! GC
\end{cfa}
which can be simplified to:
\begin{cfa}
( A || ! GA ) && ( B || ! GB ) || C || ! GA && ! GB && ! GC
\end{cfa}
Checking the complete predicate on each iteration of the pending @waituntil@ is expensive so \uC and \CFA both take steps to simplify checking for statement completion.

In the \uC @_Select@ statement, this problem is solved by constructing a tree of the resources, where the internal nodes are operators and the leaves are booleans storing the state of each resource.
A diagram of the tree for the complete predicate above is shown in Figure~\ref{f:uC_select_tree}, alongside the modification of the tree that occurs when @GA@ is @false@.
Each internal node stores the statuses of the two subtrees beneath it.
When resources become available, their corresponding leaf node status is modified, which percolates up the tree to update the state of the statement.
Once the root of the tree has both subtrees marked as @true@ then the statement is complete.
As an optimization, when the internal nodes are updated, the subtrees marked as @true@ are pruned and not examined again.
To support statement guards in \uC, the tree is modified to remove an internal node if a guard is false to maintain the appropriate predicate representation.

\begin{figure}
\begin{center}
\input{diagrams/uCpp_select_tree.tikz}
\end{center}
\caption{\uC \lstinline[language=uC++]{select} tree modification}
\label{f:uC_select_tree}
\end{figure}

The \CFA @waituntil@ statement blocks a thread until a set of resources have become available that satisfy the complete predicate of a @waituntil@.
The waiting condition of the @waituntil@ statement is implemented as the complete predicate over the resources, joined by the @waituntil@ operators, where a resource is @true@ if it is available, and @false@ otherwise.
This complete predicate is used as the mechanism to check if a thread is done waiting on a @waituntil@.
Leveraging the compiler, a predicate routine is generated per @waituntil@.
This predicate routine accepts the statuses of the resources being waited on as arguments.
A resource status is an integer that indicates whether a resource is either not available, available, or has already run its associated code block.
The predicate routine returns @true@ when the @waituntil@ is done, \ie enough resources have run their associated code blocks to satisfy the @waituntil@'s predicate, and false otherwise.
To support guards on the \CFA @waituntil@ statement, the status of a resource disabled by a guard is set to a boolean value that ensures that the predicate function behaves as if that resource is no longer part of the predicate.
The generated code allows the predicate that is checked with each iteration to be simplified to not check guard values.
For example, the following is generated for the complete predicate above:
\begin{cfa}
// statement completion predicate
bool check_completion( select_node * nodes ) {
        return nodes[0].status && nodes[1].status || nodes[2].status;
}
if ( GA || GB || GC ) {                         $\C{// skip statement if all guards false}$
        select_node nodes[3];
        nodes[0].status = ! GA && GB;   $\C{// A's status}$
        nodes[1].status = ! GB && GA;   $\C{// B's status}$
        nodes[2].status = ! GC;                 $\C{// C's status}$
        // ... rest of waituntil codegen ...
}
\end{cfa}

\uC's @_Select@, supports operators both inside and outside of the \lstinline[language=uC++]{_Select} clauses.
In the following example, the code blocks run once their corresponding predicate inside the round braces is satisfied.
\begin{lstlisting}[language=uC++,{moredelim=**[is][\color{red}]{@}{@}}]
Future_ISM<int> A, B, C, D;
_Select( @A || B && C@ ) { ... }
and _Select( @D && E@ ) { ... }
\end{lstlisting}
This feature is more expressive than the @waituntil@ statement in \CFA, allowing the code block for @&&@ to only run after \emph{both} resources are available.

In \CFA, since the @waituntil@ statement supports more resources than just futures, implementing operators inside clauses is avoided for a few reasons.
As a motivating example, suppose \CFA supported operators inside clauses as in:
\begin{cfa}
owner_lock A, B, C, D;
waituntil( A && B ) { ... }
or waituntil( C && D ) { ... }
\end{cfa}
If the @waituntil@ acquires each lock as it becomes available, there is a possible deadlock since it is in a hold-and-wait situation.
Other semantics are needed to ensure this operation is safe.
One possibility is to use \CC's @scoped_lock@ approach described in Section~\ref{s:DeadlockAvoidance};
however, that opens the potential for livelock.
Another possibility is to use resource ordering similar to \CFA's @mutex@ statement, but that alone is insufficient, if the resource ordering is not used universally.
One other way this could be implemented is to wait until all resources for a given clause are available before proceeding to acquire them, but this also quickly becomes a poor approach.
This approach does not work due to \gls{toctou} issues, \ie it is impossible to ensure that the full set of resources are available without holding them all first.
Operators inside clauses in \CFA could potentially be implemented with careful circumvention of the problems.
Finally, the problem of operators inside clauses is also a difficult to handle when supporting channels.
It would require some way to ensure channels used with internal operators are modified, if and only if, the corresponding code block is run.
However, that is not feasible due to reasons described in the exclusive-or portion of Section~\ref{s:wu_chans}.
Ultimately, this feature was not considered crucial after taking into account the complexity and runtime cost.

\subsection{The full \lstinline{waituntil} picture}

Given all the complex details handled by the @waituntil@, its full pseudocode is presented in Figure \ref{f:WU_Full_Impl}.
Some things to note are as follows.
The @finally@ blocks provide exception-safe \gls{raii} unregistering of nodes, and in particular, the @finally@ inside the innermost loop performs the immediate unregistering required for deadlock-freedom mentioned in Section~\ref{s:wu_locks}.
The @when_conditions@ array is used to store the boolean result of evaluating each guard at the beginning of the @waituntil@, and it is used to conditionally omit operations on resources with @false@ guards.
As discussed in Section~\ref{s:wu_chans}, this pseudocode includes conditional code-block execution based on the result of both @on_selected@ and @unregister_select@, which allows the channel implementation to ensure all available channel resources have their corresponding code block run.

\begin{figure}
\begin{cfa}
bool when_conditions[N];
for ( node in nodes )                                                                   $\C[3.75in]{// evaluate guards}$
        if ( node has guard ) 
                when_conditions[node] = node_guard;
        else 
                when_conditions[node] = true;

if ( any when_conditions[node] are true ) {
        select_nodes nodes[N];                                                                  $\C{// declare N select nodes}$
        try {
                // ... set statuses for nodes with when_conditions[node] == false ...

                for ( node in nodes )                                                           $\C{// register nodes}$
                        if ( when_conditions[node] )
                                register_select( resource, node );

                while ( !check_completion( nodes ) ) {  $\C{// check predicate}$
                        // block
                        for ( resource in waituntil statement ) {       $\C{// run true code blocks}$
                                if ( check_completion( nodes ) ) break;
                                if ( resource is avail )
                                        try {
                                                if( on_selected( resource ) )   $\C{// conditionally run block}$
                                                        run code block
                                        } finally                                                       $\C{// for exception safety}$
                                                unregister_select( resource, node ); $\C{// immediate unregister}$
                        }
                }
        } finally {                                                                                     $\C{// for exception safety}$
                for ( registered nodes in nodes )                                       $\C{// deregister nodes}$
                        if ( when_conditions[node] && unregister_select( resource, node )
                                        && on_selected( resource ) ) 
                                run code block                                                  $\C{// run code block upon unregister}\CRT$
        }
}
\end{cfa}
\caption{Full \lstinline{waituntil} Pseudocode Implementation}
\label{f:WU_Full_Impl}
\end{figure}

\section{\lstinline{waituntil} Performance}

Similar facilities to @waituntil@ are discussed in Section~\ref{s:History} covering C, Ada, Rust, \CC, and OCaml.
However, these facilities are either not meaningful or feasible to benchmark against.
The UNIX @select@ and related utilities are not comparable since they are system calls that go into the kernel and operate on file descriptors, whereas the @waituntil@ exists solely in user space.
Ada's \lstinline[language=Ada]{select} and \uC's \lstinline[language=uC++]{_Accept} only operate on method calls, which is done in \CFA via the @waitfor@ statement.
Rust and \CC only offer a busy-wait approach, which is not comparable to a blocking approach.
OCaml's @select@ waits on channels that are not comparable with \CFA and Go channels, so OCaml @select@ is not benchmarked against Go's @select@ and \CFA's @waituntil@.

The two \gls{synch_multiplex} utilities that are in the realm of comparability with the \CFA @waituntil@ statement are the Go \lstinline[language=Go]{select} statement and the \uC \lstinline[language=uC++]{_Select} statement.
As such, two microbenchmarks are presented, one for Go and one for \uC to contrast this feature.
Given the differences in features, polymorphism, and expressibility between @waituntil@ and \lstinline[language=Go]{select}, and \uC \lstinline[language=uC++]{_Select}, the aim of the microbenchmarking in this chapter is to show that these implementations lie in the same realm of performance, not to pick a winner.

\subsection{Channel Benchmark}

The channel multiplexing benchmarks compare \CFA's @waituntil@ and Go's \lstinline[language=Go]{select}, where the resource being waited on is a set of channels.
Although Unix's select, poll and epoll multiplex over file descriptors, which are effectively channels, these utilities are not included in the benchmarks.
Reading or writing to a file descriptor requires a system call which is much more expensive than operating on a user-space channel.
As such, it is infeasible to compare Unix's select, poll and epoll with \CFA's @waituntil@ and Go's \lstinline[language=Go]{select}.
The basic structure of the benchmark has the number of cores split evenly between producer and consumer threads, \ie, with 8 cores there are 4 producer and 4 consumer threads.
The number of resource clauses $C$ is also varied across 2, 4, and 8 clauses, where each clause has a different channel that it waits on.
Each producer and consumer repeatedly waits to either produce or consume from one of the $C$ clauses and respective channels.
For example, in \CFA syntax, the work loop in the consumer main with $C = 4$ clauses is:
\begin{cfa}
for ()
        waituntil( val << chans[0] ); or waituntil( val << chans[1] ); 
        or waituntil( val << chans[2] ); or waituntil( val << chans[3] );
\end{cfa}
A successful consumption is counted as a channel operation, and the throughput of these operations is measured over 10 seconds.
The first benchmark measures throughput of the producers and consumer synchronously waiting on the channels and the second has the threads asynchronously wait on the channels using the Go @default@ and \CFA @else@ clause.
The results are shown in Figures~\ref{f:select_contend_bench} and~\ref{f:select_spin_bench} respectively.

\begin{figure}
        \centering
        \captionsetup[subfloat]{labelfont=footnotesize,textfont=footnotesize}
        \subfloat[AMD]{
                \resizebox{0.5\textwidth}{!}{\input{figures/nasus_Contend_2.pgf}}
        }
        \subfloat[Intel]{
                \resizebox{0.5\textwidth}{!}{\input{figures/pyke_Contend_2.pgf}}
        }
        \bigskip

        \subfloat[AMD]{
                \resizebox{0.5\textwidth}{!}{\input{figures/nasus_Contend_4.pgf}}
        }
        \subfloat[Intel]{
                \resizebox{0.5\textwidth}{!}{\input{figures/pyke_Contend_4.pgf}}
        }
        \bigskip

        \subfloat[AMD]{
                \resizebox{0.5\textwidth}{!}{\input{figures/nasus_Contend_8.pgf}}
        }
        \subfloat[Intel]{
                \resizebox{0.5\textwidth}{!}{\input{figures/pyke_Contend_8.pgf}}
        }
        \caption{The channel synchronous multiplexing benchmark comparing Go select and \CFA \lstinline{waituntil} statement throughput (higher is better).}
        \label{f:select_contend_bench}
\end{figure}

\begin{figure}
        \centering
        \captionsetup[subfloat]{labelfont=footnotesize,textfont=footnotesize}
        \subfloat[AMD]{
                \resizebox{0.5\textwidth}{!}{\input{figures/nasus_Spin_2.pgf}}
        }
        \subfloat[Intel]{
                \resizebox{0.5\textwidth}{!}{\input{figures/pyke_Spin_2.pgf}}
        }
        \bigskip

        \subfloat[AMD]{
                \resizebox{0.5\textwidth}{!}{\input{figures/nasus_Spin_4.pgf}}
        }
        \subfloat[Intel]{
                \resizebox{0.5\textwidth}{!}{\input{figures/pyke_Spin_4.pgf}}
        }
        \bigskip

        \subfloat[AMD]{
                \resizebox{0.5\textwidth}{!}{\input{figures/nasus_Spin_8.pgf}}
        }
        \subfloat[Intel]{
                \resizebox{0.5\textwidth}{!}{\input{figures/pyke_Spin_8.pgf}}
        }
        \caption{The asynchronous multiplexing channel benchmark comparing Go select and \CFA \lstinline{waituntil} statement throughput (higher is better).}
        \label{f:select_spin_bench}
\end{figure}

Both Figures~\ref{f:select_contend_bench} and~\ref{f:select_spin_bench} have similar results when comparing \lstinline[language=Go]{select} and @waituntil@.
In the AMD benchmarks (left column), the performance is very similar as the number of cores scale.
The AMD machine has a high-caching contention cost because of its \emph{chiplet} L3 cache (\ie many L3 caches servicing a small number of cores), which creates a bottleneck on the channel locks and dominates the shape of the performance curve for both \CFA and Go.
Hence, it is difficult to detect differences in the \gls{synch_multiplex}, except at low cores, where Go has significantly better performance, due to an optimization in its scheduler.
Go heavily optimizes thread handoffs on the local run-queue, which can result in very good performance for low numbers of threads parking/unparking each other~\cite{go:sched}.
In the Intel benchmarks (right column), \CFA performs better than Go as the number of cores scales past 2/4 and as the number of clauses increase.
This difference is due to Go's acquiring all channel locks when registering and unregistering channels on a \lstinline[language=Go]{select}.
Go then is holding a lock for every channel, resulting in worse performance as the number of channels increase.
In \CFA, since races are consolidated without holding all locks, it scales much better both with cores and clauses since more work can occur in parallel.
This scalability difference is more significant on the Intel machine than the AMD machine since the Intel has lower cache-contention costs.

The Go approach of holding all internal channel-locks in the \lstinline[language=Go]{select} has additional drawbacks.
There are pathological cases where Go's throughput has significant jitter.
Consider a producer and consumer thread, @P1@ and @C1@, selecting from both channels @A@ and @B@.
\begin{cquote}
\begin{tabular}{@{}ll@{}}
@P1@ & @C1@ \\
\begin{cfa}
waituntil( A << i ); or waituntil( B << i );
\end{cfa}
&
\begin{cfa}
waituntil( val << A ); or waituntil( val << B );
\end{cfa}
\end{tabular}
\end{cquote}
Additionally, there is another producer and consumer thread, @P2@ and @C2@, operating solely on @B@.
\begin{cquote}
\begin{tabular}{@{}ll@{}}
@P2@ & @C2@ \\
\begin{cfa}
B << val;
\end{cfa}
&
\begin{cfa}
val << B;
\end{cfa}
\end{tabular}
\end{cquote}
In Go, this setup results in significantly worse performance since @P2@ and @C2@ cannot operate in parallel with @P1@ and @C1@ due to all locks being acquired.
Interestingly, this case may not be as pathological as it seems.
If the set of channels belonging to a \lstinline[language=Go]{select} have channels that overlap with the set of another \lstinline[language=Go]{select}, these statements lose the ability to operate in parallel.
The implementation in \CFA only holds a single lock at a time, resulting in better locking granularity, and hence, more parallelism.
Comparison of this pathological case is shown in Table~\ref{t:pathGo}.
The AMD results highlight the worst-case scenario for Go since contention is more costly on this machine than the Intel machine.

\begin{table}[t]
\centering
\setlength{\extrarowheight}{2pt}
\setlength{\tabcolsep}{5pt}

\caption{Throughput (channel operations per second) of \CFA and Go in a pathological case for contention in Go's select implementation}
\label{t:pathGo}
\begin{tabular}{r|r|r}
                        & \multicolumn{1}{c|}{\CFA} & \multicolumn{1}{c}{Go} \\
        \hline
        AMD             & \input{data/nasus_Order} \\
        \hline
        Intel   & \input{data/pyke_Order}
\end{tabular}
\end{table}

Another difference between Go and \CFA is the order of clause selection when multiple clauses are available.
Go \emph{randomly} selects a clause~\cite{go:select}, but \CFA chooses in the order clauses are listed.
This \CFA design decision allows users to set implicit priorities, which can result in more predictable behaviour and even better performance.
In the previous example, threads @P1@ and @C1@ prioritize channel @A@ in the @waituntil@, which can reduce contention for threads @P2@ and @C2@ accessing channel @B@.
If \CFA did not have priorities, the performance difference in Table~\ref{t:pathGo} would be significant less due to extra contention on channel @B@.

\subsection{Future Benchmark}

The future benchmark compares \CFA's @waituntil@ with \uC's \lstinline[language=uC++]{_Select}, with both utilities waiting on futures.
While both statements have very similar semantics, supporting @and@ and @or@ operators, \lstinline[language=uC++]{_Select} can only wait on futures, whereas the @waituntil@ is polymorphic. 
As such, the underlying implementation of the operators differs between @waituntil@ and \lstinline[language=uC++]{_Select}.
The @waituntil@ statement checks for statement completion using a predicate function, whereas the \lstinline[language=uC++]{_Select} statement maintains a tree that represents the state of the internal predicate.

This benchmark aims to indirectly measure the impact of various predicates on the performance of the @waituntil@ and \lstinline[language=uC++]{_Select} statements.
The benchmark is indirect since the performance of futures in \CFA and \uC differ by a significant margin.
The experiment has a server, which cycles fulfilling three futures, @A@, @B@, and @C@, and a client, which waits for these futures to be fulfilled using four different kinds of predicates given in \CFA:
\begin{cquote}
\begin{tabular}{@{}l|l@{}}
OR & AND \\
\hline
\begin{cfa}
waituntil( A ) { get( A ); }
or waituntil( B ) { get( B ); }
or waituntil( C ) { get( C ); }
\end{cfa}
&
\begin{cfa}
waituntil( A ) { get( A ); }
and waituntil( B ) { get( B ); }
and waituntil( C ) { get( C ); }
\end{cfa}
\\
\multicolumn{2}{@{}c@{}}{} \\
AND-OR & OR-AND \\
\hline
\begin{cfa}
waituntil( A ) { get( A ); }
and waituntil( B ) { get( B ); }
or waituntil( C ) { get( C ); }
\end{cfa}
&
\begin{cfa}
@(@ waituntil( A ) { get( A ); }
or waituntil( B ) { get( B ); } @)@
and waituntil( C ) { get( C ); }
\end{cfa}
\end{tabular}
\end{cquote}
The server and client use a low cost synchronize after each fulfillment, so the server does not race ahead of the client.

Results of this benchmark are shown in Figure~\ref{f:futurePerf}.
Each pair of bars is marked with the predicate name for that experiment and the value at the top of each bar is the standard deviation.
In detail, \uC results are lower in all cases due to the performance difference between futures and the more complex \gls{synch_multiplex} implementation.
However, the bars for both systems have similar height patterns across the experiments.
The @OR@ column for \CFA is more performant than the other \CFA predicates, due to the special-casing of @waituntil@ statements with only @or@ operators.
For both \uC and \CFA, the @AND@ experiment is the least performant, which is expected since all three futures need to be fulfilled for each statement completion.
Interestingly, \CFA has lower variation across predicates on the AMD (excluding the special OR case), whereas \uC has lower variation on the Intel.
Given the differences in semantics and implementation between \uC and \CFA, this test only illustrates the overall costs among the different kinds of predicates.

\begin{figure}
        \centering
        \subfloat[AMD Future Synchronization Benchmark]{
                \resizebox{0.5\textwidth}{!}{\input{figures/nasus_Future.pgf}}
                \label{f:futureAMD}
        }
        \subfloat[Intel Future Synchronization Benchmark]{
                \resizebox{0.5\textwidth}{!}{\input{figures/pyke_Future.pgf}}
                \label{f:futureIntel}
        }
        \caption{\CFA \lstinline{waituntil} and \uC \lstinline{_Select} statement throughput synchronizing on a set of futures with varying wait predicates (higher is better).}
        \label{f:futurePerf}
\end{figure}