source: doc/theses/andrew_beach_MMath/uw-ethesis.cls @ 5d2db68

ADTarm-ehast-experimentalenumforall-pointer-decayjacob/cs343-translationnew-ast-unique-exprpthread-emulationqualifiedEnum
Last change on this file since 5d2db68 was 912cc7d7, checked in by Andrew Beach <ajbeach@…>, 4 years ago

In Andrew/MMath; added a configuration command.

  • Property mode set to 100644
File size: 6.3 KB
Line 
1% A document class built from the uw-ethesis template, 2017-06-14 version.
2% This link should get to the regulations:
3% https://uwaterloo.ca/graduate-studies/thesis.
4%
5% WIP I am still moving things out of the provided template.
6%
7% This is approximately (check regulations to be sure) the required set up for
8% a thesis at UW. It also adds some other pieces that are likely to be useful.
9%
10% There are several formats you may choose from. These adjust the settings so
11% the document comes out a little better for different uses. "digital" is for
12% pdf documents that will remain on a computer while "print" is for printing
13% paper copies.
14%
15% Options:
16%   <format>
17%     All the formats are options, sets the document's format to that format.
18%     If no format is given digital is the default.
19%
20% Exported Names:
21%   \ethesissetup{<key-value-pairs>}
22%     Preforms set-up (or a reconfiguration) of the document class. See the
23%     Set-Up Keys section for the keys that may be passed in. Use commas to
24%     seperate key-value-pairs.
25%
26%   \ifformat{<format>}{<true>}{<false>}
27%     If the document's format is <format> than expands to <true> otherwise
28%     expands to <false>.
29%
30%   \usehyperrefpackage[<options>]{<setup>}
31%     Loads the hyperref package with <options> and preforms set up. The
32%     initial setup depends on the document format but they can be overriden
33%     with options in <setup> (set hyperref's \hypersetup for details).
34%
35%   \eprint{<key>}
36%     Expands to a human readable value tracked by the ethesis class. This
37%     can be used to retreave and format values set during set up.
38%
39% Set-Up Keys:
40%   author=<text>
41%   title=<text>
42%   program=<text>
43%   subject=<text>
44%   keywords=<text>
45%   degree=masters|phd
46%   faculty=ahs|arts|eng|env|math|sci
47\NeedsTeXFormat{LaTeX2e}
48\ProvidesClass{uw-ethesis}[2020/10/25 v0.2 UW-eThesis Template Document Class]
49
50\RequirePackage{etoolbox}
51\RequirePackage{xkeyval}
52
53% Requested Format:
54\newrobustcmd*{\ethesis@@format}{digital}
55\DeclareOption{print}{\renewrobustcmd*{\ethesis@@format}{print}}
56\DeclareOption{digital}{\renewrobustcmd*{\ethesis@@format}{digital}}
57
58\ProcessOptions\relax
59
60\newcommand\ifformat[3]{\ifdefstring{\ethesis@format}{#1}{#2}{#3}}
61
62\ifformat{print}{%
63  \LoadClass[letterpaper,12pt,titlepage,openright,twoside,final]{book}%
64}{%
65  \LoadClass[letterpaper,12pt,titlepage,twoside,final]{book}%
66}
67
68% Setting up the page margins. These are the minimum margins in the uWaterloo
69% thesis requirements. 1in (72pt) on the top, bottom and outside and
70% 1 1/8in (81pt) on the inside/gutter/binding side. Only required for
71% printing but here set for all formats.
72
73% If margin notes are used, you must adjust \textwidth, \marginparwidth and
74% \marginparsep so space between the margin notes and page edge is less than
75% 15mm (0.6in). I don't actually understand that instruction.
76
77\setlength{\marginparwidth}{0pt}
78
79% Width of space between body text and margin notes.
80\setlength{\marginparsep}{0pt}
81
82% Set width of margin on binding side. With oneside all pages are odd.
83\setlength{\evensidemargin}{0.125in}
84\setlength{\oddsidemargin}{0.125in}
85
86% Assuming US letter paper (8.5 in. x 11 in.) and side margins as above.
87\setlength{\textwidth}{6.375in}
88\raggedbottom
89
90% The following statement specifies the amount of space between paragraphs.
91% Other reasonable specifications are \bigskipamount and \smallskipamount.
92\setlength{\parskip}{\medskipamount}
93
94% The following statement controls the line spacing. You should not change
95% this value significantly (e.g. perhaps "1.2").
96\renewcommand{\baselinestretch}{1}
97
98% Normally every chapter will start on a recto (right-hand side) page. This
99% command is used to make sure the each section of the front pages starts on
100% a recto page. This will often require an empty verso (left-hand side) page
101% that should not have the page number printed on it.
102\let\ethesis@origdoublepage\cleardoublepage
103\newcommand{\clearemptydoublepage}{%
104  \clearpage{\pagestyle{empty}\ethesis@origdoublepage}}
105\let\cleardoublepage\clearemptydoublepage
106
107% Change the default name of the bibliography.
108\renewcommand*{\bibname}{References}
109
110\newrobustcmd*\ethesissetup[1]{\setkeys{ethesis}{#1}}
111
112\define@cmdkeys{ethesis}[ethesis@@]{%
113  author,title,program,subject,keywords}
114
115\define@choicekey{ethesis}{degree}{masters,phd}{\def\ethesis@@degree{#1}}
116\define@choicekey{ethesis}{faculty}{ahs,arts,eng,env,math,sci}%
117  {\def\ethesis@@faculty{#1}}
118
119\newrobustcmd*\eprint[1]{
120  \ifcsdef{ethesis@long#1}{\csuse{ethesis@long#1}}{%
121    \ifcsdef{ethesis@@#1}{\csuse{ethesis@@#1}}{%
122      % ERROR: (Check for a way to emit an actual error.)
123      [UW-eThesis doesn't know how to print: #1 ]
124    }
125  }
126}
127
128\newrobustcmd*\ethesis@longdegree{%
129  \ifdefstring{\ethesis@@degree}{phd}{Doctor of Philosophy}{Masters}}
130
131% Includes the hyperref package loading a number of defaults.
132\newrobustcmd*{\usehyperrefpackage}[2][]{%
133  \usepackage[#1]{hyperref}
134  \hypersetup{
135    plainpages=false,       % Needed for Roman numbers in frontpages.
136    unicode=false,          % Non-Latin characters in Acrobat ^ ^ s bookmarks.
137    pdftoolbar=true,        % Show Acrobat ^ ^ s toolbar?
138    pdfmenubar=true,        % Show Acrobat ^ ^ s menu?
139    pdffitwindow=false,     % Window is not fit to page when opened.
140    pdfstartview={FitH},    % Fits the width of the page to the window.
141  }
142  \ifdef{\ethesis@@title}{\hypersetup{pdftitle={\ethesis@@title}}}{}
143  \ifdef{\ethesis@@author}{\hypersetup{pdfauthor={\ethesis@@author}}}{}
144  \ifdef{\ethesis@@subject}{\hypersetup{pdfsubject={\ethesis@@subject}}}{}
145  \ifdef{\ethesis@@keywords}{\hypersetup{pdfkeywords={\ethesis@@keywords}}}{}
146  \ifformat{print}{
147    \hypersetup{
148      %colorlinks=false,
149      colorlinks=true, % I think there is a style difference here.
150      citecolor=black,
151      filecolor=black,
152      linkcolor=black,
153      urlcolor=black
154    }
155  }{
156    \hypersetup{
157      colorlinks=true,        % false: boxed links; true: colored links
158      linkcolor=blue,         % colour of internal links
159      citecolor=green,        % colour of links to bibliography
160      filecolor=magenta,      % colour of file links
161      urlcolor=cyan           % colour of external links
162    }
163  }
164  \notblank{#2}{\hypersetup{#2}}{}
165}
166
167% Includes the glossaries-extra package and sets up some helpers.
168% Except right now I don't really have any helpers to add.
169%\newrobustcmd*{\useglossariesextrapackage}[2][]{%
170%  \usepackage[#1]{glossaries-extra}
171%}
172
173\let\colour=\color
Note: See TracBrowser for help on using the repository browser.