source: Makefile.in @ 03bd407

ADTaaron-thesisarm-ehast-experimentalcleanup-dtorsdeferred_resndemanglerenumforall-pointer-decayjacob/cs343-translationjenkins-sandboxnew-astnew-ast-unique-exprnew-envno_listpersistent-indexerpthread-emulationqualifiedEnumwith_gc
Last change on this file since 03bd407 was 54cd58b, checked in by Rob Schluntz <rschlunt@…>, 7 years ago

Add missing Indenter.h include

  • Property mode set to 100644
File size: 28.4 KB
Line 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17######################## -*- Mode: Makefile-Automake -*- ######################
18###############################################################################
19VPATH = @srcdir@
20am__is_gnu_make = { \
21  if test -z '$(MAKELEVEL)'; then \
22    false; \
23  elif test -n '$(MAKE_HOST)'; then \
24    true; \
25  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
26    true; \
27  else \
28    false; \
29  fi; \
30}
31am__make_running_with_option = \
32  case $${target_option-} in \
33      ?) ;; \
34      *) echo "am__make_running_with_option: internal error: invalid" \
35              "target option '$${target_option-}' specified" >&2; \
36         exit 1;; \
37  esac; \
38  has_opt=no; \
39  sane_makeflags=$$MAKEFLAGS; \
40  if $(am__is_gnu_make); then \
41    sane_makeflags=$$MFLAGS; \
42  else \
43    case $$MAKEFLAGS in \
44      *\\[\ \   ]*) \
45        bs=\\; \
46        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
47          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
48    esac; \
49  fi; \
50  skip_next=no; \
51  strip_trailopt () \
52  { \
53    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
54  }; \
55  for flg in $$sane_makeflags; do \
56    test $$skip_next = yes && { skip_next=no; continue; }; \
57    case $$flg in \
58      *=*|--*) continue;; \
59        -*I) strip_trailopt 'I'; skip_next=yes;; \
60      -*I?*) strip_trailopt 'I';; \
61        -*O) strip_trailopt 'O'; skip_next=yes;; \
62      -*O?*) strip_trailopt 'O';; \
63        -*l) strip_trailopt 'l'; skip_next=yes;; \
64      -*l?*) strip_trailopt 'l';; \
65      -[dEDm]) skip_next=yes;; \
66      -[JT]) skip_next=yes;; \
67    esac; \
68    case $$flg in \
69      *$$target_option*) has_opt=yes; break;; \
70    esac; \
71  done; \
72  test $$has_opt = yes
73am__make_dryrun = (target_option=n; $(am__make_running_with_option))
74am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
75pkgdatadir = $(datadir)/@PACKAGE@
76pkgincludedir = $(includedir)/@PACKAGE@
77pkglibdir = $(libdir)/@PACKAGE@
78pkglibexecdir = $(libexecdir)/@PACKAGE@
79am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
80install_sh_DATA = $(install_sh) -c -m 644
81install_sh_PROGRAM = $(install_sh) -c
82install_sh_SCRIPT = $(install_sh) -c
83INSTALL_HEADER = $(INSTALL_DATA)
84transform = $(program_transform_name)
85NORMAL_INSTALL = :
86PRE_INSTALL = :
87POST_INSTALL = :
88NORMAL_UNINSTALL = :
89PRE_UNINSTALL = :
90POST_UNINSTALL = :
91build_triplet = @build@
92host_triplet = @host@
93subdir = .
94ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
95am__aclocal_m4_deps = $(top_srcdir)/configure.ac
96am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
97        $(ACLOCAL_M4)
98DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
99        $(am__configure_deps) $(am__DIST_COMMON)
100am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
101 configure.lineno config.status.lineno
102mkinstalldirs = $(install_sh) -d
103CONFIG_HEADER = config.h
104CONFIG_CLEAN_FILES =
105CONFIG_CLEAN_VPATH_FILES =
106AM_V_P = $(am__v_P_@AM_V@)
107am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
108am__v_P_0 = false
109am__v_P_1 = :
110AM_V_GEN = $(am__v_GEN_@AM_V@)
111am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
112am__v_GEN_0 = @echo "  GEN     " $@;
113am__v_GEN_1 =
114AM_V_at = $(am__v_at_@AM_V@)
115am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
116am__v_at_0 = @
117am__v_at_1 =
118SOURCES =
119DIST_SOURCES =
120RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
121        ctags-recursive dvi-recursive html-recursive info-recursive \
122        install-data-recursive install-dvi-recursive \
123        install-exec-recursive install-html-recursive \
124        install-info-recursive install-pdf-recursive \
125        install-ps-recursive install-recursive installcheck-recursive \
126        installdirs-recursive pdf-recursive ps-recursive \
127        tags-recursive uninstall-recursive
128am__can_run_installinfo = \
129  case $$AM_UPDATE_INFO_DIR in \
130    n|no|NO) false;; \
131    *) (install-info --version) >/dev/null 2>&1;; \
132  esac
133am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
134am__vpath_adj = case $$p in \
135    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
136    *) f=$$p;; \
137  esac;
138am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
139am__install_max = 40
140am__nobase_strip_setup = \
141  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
142am__nobase_strip = \
143  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
144am__nobase_list = $(am__nobase_strip_setup); \
145  for p in $$list; do echo "$$p $$p"; done | \
146  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
147  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
148    if (++n[$$2] == $(am__install_max)) \
149      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
150    END { for (dir in files) print dir, files[dir] }'
151am__base_list = \
152  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
153  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
154am__uninstall_files_from_dir = { \
155  test -z "$$files" \
156    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
157    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
158         $(am__cd) "$$dir" && rm -f $$files; }; \
159  }
160man1dir = $(mandir)/man1
161am__installdirs = "$(DESTDIR)$(man1dir)"
162NROFF = nroff
163MANS = $(man1_MANS)
164RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
165  distclean-recursive maintainer-clean-recursive
166am__recursive_targets = \
167  $(RECURSIVE_TARGETS) \
168  $(RECURSIVE_CLEAN_TARGETS) \
169  $(am__extra_recursive_targets)
170AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
171        cscope distdir dist dist-all distcheck
172am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
173        $(LISP)config.h.in
174# Read a list of newline-separated strings from the standard input,
175# and print each of them once, without duplicates.  Input order is
176# *not* preserved.
177am__uniquify_input = $(AWK) '\
178  BEGIN { nonempty = 0; } \
179  { items[$$0] = 1; nonempty = 1; } \
180  END { if (nonempty) { for (i in items) print i; }; } \
181'
182# Make sure the list of sources is unique.  This is necessary because,
183# e.g., the same source file might be shared among _SOURCES variables
184# for different programs/libraries.
185am__define_uniq_tagged_files = \
186  list='$(am__tagged_files)'; \
187  unique=`for i in $$list; do \
188    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
189  done | $(am__uniquify_input)`
190ETAGS = etags
191CTAGS = ctags
192CSCOPE = cscope
193DIST_SUBDIRS = $(SUBDIRS)
194am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
195        $(top_srcdir)/automake/compile \
196        $(top_srcdir)/automake/config.guess \
197        $(top_srcdir)/automake/config.sub \
198        $(top_srcdir)/automake/install-sh \
199        $(top_srcdir)/automake/missing INSTALL README automake/compile \
200        automake/config.guess automake/config.sub automake/depcomp \
201        automake/install-sh automake/missing automake/ylwrap
202DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
203distdir = $(PACKAGE)-$(VERSION)
204top_distdir = $(distdir)
205am__remove_distdir = \
206  if test -d "$(distdir)"; then \
207    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
208      && rm -rf "$(distdir)" \
209      || { sleep 5 && rm -rf "$(distdir)"; }; \
210  else :; fi
211am__post_remove_distdir = $(am__remove_distdir)
212am__relativize = \
213  dir0=`pwd`; \
214  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
215  sed_rest='s,^[^/]*/*,,'; \
216  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
217  sed_butlast='s,/*[^/]*$$,,'; \
218  while test -n "$$dir1"; do \
219    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
220    if test "$$first" != "."; then \
221      if test "$$first" = ".."; then \
222        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
223        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
224      else \
225        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
226        if test "$$first2" = "$$first"; then \
227          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
228        else \
229          dir2="../$$dir2"; \
230        fi; \
231        dir0="$$dir0"/"$$first"; \
232      fi; \
233    fi; \
234    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
235  done; \
236  reldir="$$dir2"
237DIST_ARCHIVES = $(distdir).tar.gz
238GZIP_ENV = --best
239DIST_TARGETS = dist-gzip
240distuninstallcheck_listfiles = find . -type f -print
241am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
242  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
243distcleancheck_listfiles = find . -type f -print
244ACLOCAL = @ACLOCAL@
245ALLOCA = @ALLOCA@
246AMTAR = @AMTAR@
247AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
248AUTOCONF = @AUTOCONF@
249AUTOHEADER = @AUTOHEADER@
250AUTOMAKE = @AUTOMAKE@
251AWK = @AWK@
252BACKEND_CC = @BACKEND_CC@               # C compiler used to compile Cforall programs, versus C++ compiler used to build cfa command
253CC = @CC@
254CCAS = @CCAS@
255CCASDEPMODE = @CCASDEPMODE@
256CCASFLAGS = @CCASFLAGS@
257CCDEPMODE = @CCDEPMODE@
258CFA_BACKEND_CC = @CFA_BACKEND_CC@
259CFA_BINDIR = @CFA_BINDIR@
260CFA_FLAGS = @CFA_FLAGS@
261CFA_INCDIR = @CFA_INCDIR@
262CFA_LIBDIR = @CFA_LIBDIR@
263CFA_NAME = @CFA_NAME@
264CFA_PREFIX = @CFA_PREFIX@
265CFLAGS = @CFLAGS@
266CPP = @CPP@
267CPPFLAGS = @CPPFLAGS@
268CXX = @CXX@
269CXXDEPMODE = @CXXDEPMODE@
270CXXFLAGS = @CXXFLAGS@
271CYGPATH_W = @CYGPATH_W@
272DEFS = @DEFS@
273DEPDIR = @DEPDIR@
274ECHO_C = @ECHO_C@
275ECHO_N = @ECHO_N@
276ECHO_T = @ECHO_T@
277EGREP = @EGREP@
278EXEEXT = @EXEEXT@
279GREP = @GREP@
280INSTALL = @INSTALL@
281INSTALL_DATA = @INSTALL_DATA@
282INSTALL_PROGRAM = @INSTALL_PROGRAM@
283INSTALL_SCRIPT = @INSTALL_SCRIPT@
284INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
285LDFLAGS = @LDFLAGS@
286LEX = @LEX@
287LEXLIB = @LEXLIB@
288LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
289LIBOBJS = @LIBOBJS@
290LIBS = @LIBS@
291LTLIBOBJS = @LTLIBOBJS@
292MACHINE_TYPE = @MACHINE_TYPE@
293MAINT = @MAINT@
294MAKEINFO = @MAKEINFO@
295MKDIR_P = @MKDIR_P@
296OBJEXT = @OBJEXT@
297PACKAGE = @PACKAGE@
298PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
299PACKAGE_NAME = @PACKAGE_NAME@
300PACKAGE_STRING = @PACKAGE_STRING@
301PACKAGE_TARNAME = @PACKAGE_TARNAME@
302PACKAGE_URL = @PACKAGE_URL@
303PACKAGE_VERSION = @PACKAGE_VERSION@
304PATH_SEPARATOR = @PATH_SEPARATOR@
305RANLIB = @RANLIB@
306SET_MAKE = @SET_MAKE@
307SHELL = @SHELL@
308STRIP = @STRIP@
309VERSION = @VERSION@
310YACC = @YACC@
311YFLAGS = @YFLAGS@
312abs_builddir = @abs_builddir@
313abs_srcdir = @abs_srcdir@
314abs_top_builddir = @abs_top_builddir@
315abs_top_srcdir = @abs_top_srcdir@
316ac_ct_CC = @ac_ct_CC@
317ac_ct_CXX = @ac_ct_CXX@
318am__include = @am__include@
319am__leading_dot = @am__leading_dot@
320am__quote = @am__quote@
321am__tar = @am__tar@
322am__untar = @am__untar@
323bindir = @bindir@
324build = @build@
325build_alias = @build_alias@
326build_cpu = @build_cpu@
327build_os = @build_os@
328build_vendor = @build_vendor@
329builddir = @builddir@
330datadir = @datadir@
331datarootdir = @datarootdir@
332docdir = @docdir@
333dvidir = @dvidir@
334exec_prefix = @exec_prefix@
335host = @host@
336host_alias = @host_alias@
337host_cpu = @host_cpu@
338host_os = @host_os@
339host_vendor = @host_vendor@
340htmldir = @htmldir@
341includedir = @includedir@
342infodir = @infodir@
343install_sh = @install_sh@
344libdir = @libdir@
345libexecdir = @libexecdir@
346localedir = @localedir@
347localstatedir = @localstatedir@
348mandir = @mandir@
349mkdir_p = @mkdir_p@
350oldincludedir = @oldincludedir@
351pdfdir = @pdfdir@
352prefix = @prefix@
353program_transform_name = @program_transform_name@
354psdir = @psdir@
355runstatedir = @runstatedir@
356sbindir = @sbindir@
357sharedstatedir = @sharedstatedir@
358srcdir = @srcdir@
359sysconfdir = @sysconfdir@
360target_alias = @target_alias@
361top_build_prefix = @top_build_prefix@
362top_builddir = @top_builddir@
363top_srcdir = @top_srcdir@
364AUTOMAKE_OPTIONS = foreign              # do not require all the GNU file names
365SUBDIRS = src/driver src src/prelude src/libcfa # order important, src before prelude because cfa-cpp used to build prelude
366EXTRA_DIST = Docs                       # non-source files
367MAINTAINERCLEANFILES = lib/* bin/* src/examples/.deps/* src/tests/.deps/* src/tests/.out/*
368man1_MANS = doc/man/cfa.1
369all: config.h
370        $(MAKE) $(AM_MAKEFLAGS) all-recursive
371
372.SUFFIXES:
373am--refresh: Makefile
374        @:
375$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
376        @for dep in $?; do \
377          case '$(am__configure_deps)' in \
378            *$$dep*) \
379              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
380              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
381                && exit 0; \
382              exit 1;; \
383          esac; \
384        done; \
385        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
386        $(am__cd) $(top_srcdir) && \
387          $(AUTOMAKE) --foreign Makefile
388Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
389        @case '$?' in \
390          *config.status*) \
391            echo ' $(SHELL) ./config.status'; \
392            $(SHELL) ./config.status;; \
393          *) \
394            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
395            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
396        esac;
397
398$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
399        $(SHELL) ./config.status --recheck
400
401$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
402        $(am__cd) $(srcdir) && $(AUTOCONF)
403$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
404        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
405$(am__aclocal_m4_deps):
406
407config.h: stamp-h1
408        @test -f $@ || rm -f stamp-h1
409        @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
410
411stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
412        @rm -f stamp-h1
413        cd $(top_builddir) && $(SHELL) ./config.status config.h
414$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
415        ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
416        rm -f stamp-h1
417        touch $@
418
419distclean-hdr:
420        -rm -f config.h stamp-h1
421install-man1: $(man1_MANS)
422        @$(NORMAL_INSTALL)
423        @list1='$(man1_MANS)'; \
424        list2=''; \
425        test -n "$(man1dir)" \
426          && test -n "`echo $$list1$$list2`" \
427          || exit 0; \
428        echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
429        $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
430        { for i in $$list1; do echo "$$i"; done;  \
431        if test -n "$$list2"; then \
432          for i in $$list2; do echo "$$i"; done \
433            | sed -n '/\.1[a-z]*$$/p'; \
434        fi; \
435        } | while read p; do \
436          if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
437          echo "$$d$$p"; echo "$$p"; \
438        done | \
439        sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
440              -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
441        sed 'N;N;s,\n, ,g' | { \
442        list=; while read file base inst; do \
443          if test "$$base" = "$$inst"; then list="$$list $$file"; else \
444            echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
445            $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
446          fi; \
447        done; \
448        for i in $$list; do echo "$$i"; done | $(am__base_list) | \
449        while read files; do \
450          test -z "$$files" || { \
451            echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
452            $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
453        done; }
454
455uninstall-man1:
456        @$(NORMAL_UNINSTALL)
457        @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
458        files=`{ for i in $$list; do echo "$$i"; done; \
459        } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
460              -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
461        dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
462
463# This directory's subdirectories are mostly independent; you can cd
464# into them and run 'make' without going through this Makefile.
465# To change the values of 'make' variables: instead of editing Makefiles,
466# (1) if the variable is set in 'config.status', edit 'config.status'
467#     (which will cause the Makefiles to be regenerated when you run 'make');
468# (2) otherwise, pass the desired values on the 'make' command line.
469$(am__recursive_targets):
470        @fail=; \
471        if $(am__make_keepgoing); then \
472          failcom='fail=yes'; \
473        else \
474          failcom='exit 1'; \
475        fi; \
476        dot_seen=no; \
477        target=`echo $@ | sed s/-recursive//`; \
478        case "$@" in \
479          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
480          *) list='$(SUBDIRS)' ;; \
481        esac; \
482        for subdir in $$list; do \
483          echo "Making $$target in $$subdir"; \
484          if test "$$subdir" = "."; then \
485            dot_seen=yes; \
486            local_target="$$target-am"; \
487          else \
488            local_target="$$target"; \
489          fi; \
490          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
491          || eval $$failcom; \
492        done; \
493        if test "$$dot_seen" = "no"; then \
494          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
495        fi; test -z "$$fail"
496
497ID: $(am__tagged_files)
498        $(am__define_uniq_tagged_files); mkid -fID $$unique
499tags: tags-recursive
500TAGS: tags
501
502tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
503        set x; \
504        here=`pwd`; \
505        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
506          include_option=--etags-include; \
507          empty_fix=.; \
508        else \
509          include_option=--include; \
510          empty_fix=; \
511        fi; \
512        list='$(SUBDIRS)'; for subdir in $$list; do \
513          if test "$$subdir" = .; then :; else \
514            test ! -f $$subdir/TAGS || \
515              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
516          fi; \
517        done; \
518        $(am__define_uniq_tagged_files); \
519        shift; \
520        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
521          test -n "$$unique" || unique=$$empty_fix; \
522          if test $$# -gt 0; then \
523            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
524              "$$@" $$unique; \
525          else \
526            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
527              $$unique; \
528          fi; \
529        fi
530ctags: ctags-recursive
531
532CTAGS: ctags
533ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
534        $(am__define_uniq_tagged_files); \
535        test -z "$(CTAGS_ARGS)$$unique" \
536          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
537             $$unique
538
539GTAGS:
540        here=`$(am__cd) $(top_builddir) && pwd` \
541          && $(am__cd) $(top_srcdir) \
542          && gtags -i $(GTAGS_ARGS) "$$here"
543cscope: cscope.files
544        test ! -s cscope.files \
545          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
546clean-cscope:
547        -rm -f cscope.files
548cscope.files: clean-cscope cscopelist
549cscopelist: cscopelist-recursive
550
551cscopelist-am: $(am__tagged_files)
552        list='$(am__tagged_files)'; \
553        case "$(srcdir)" in \
554          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
555          *) sdir=$(subdir)/$(srcdir) ;; \
556        esac; \
557        for i in $$list; do \
558          if test -f "$$i"; then \
559            echo "$(subdir)/$$i"; \
560          else \
561            echo "$$sdir/$$i"; \
562          fi; \
563        done >> $(top_builddir)/cscope.files
564
565distclean-tags:
566        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
567        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
568
569distdir: $(DISTFILES)
570        $(am__remove_distdir)
571        test -d "$(distdir)" || mkdir "$(distdir)"
572        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
573        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
574        list='$(DISTFILES)'; \
575          dist_files=`for file in $$list; do echo $$file; done | \
576          sed -e "s|^$$srcdirstrip/||;t" \
577              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
578        case $$dist_files in \
579          */*) $(MKDIR_P) `echo "$$dist_files" | \
580                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
581                           sort -u` ;; \
582        esac; \
583        for file in $$dist_files; do \
584          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
585          if test -d $$d/$$file; then \
586            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
587            if test -d "$(distdir)/$$file"; then \
588              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
589            fi; \
590            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
591              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
592              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
593            fi; \
594            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
595          else \
596            test -f "$(distdir)/$$file" \
597            || cp -p $$d/$$file "$(distdir)/$$file" \
598            || exit 1; \
599          fi; \
600        done
601        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
602          if test "$$subdir" = .; then :; else \
603            $(am__make_dryrun) \
604              || test -d "$(distdir)/$$subdir" \
605              || $(MKDIR_P) "$(distdir)/$$subdir" \
606              || exit 1; \
607            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
608            $(am__relativize); \
609            new_distdir=$$reldir; \
610            dir1=$$subdir; dir2="$(top_distdir)"; \
611            $(am__relativize); \
612            new_top_distdir=$$reldir; \
613            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
614            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
615            ($(am__cd) $$subdir && \
616              $(MAKE) $(AM_MAKEFLAGS) \
617                top_distdir="$$new_top_distdir" \
618                distdir="$$new_distdir" \
619                am__remove_distdir=: \
620                am__skip_length_check=: \
621                am__skip_mode_fix=: \
622                distdir) \
623              || exit 1; \
624          fi; \
625        done
626        -test -n "$(am__skip_mode_fix)" \
627        || find "$(distdir)" -type d ! -perm -755 \
628                -exec chmod u+rwx,go+rx {} \; -o \
629          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
630          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
631          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
632        || chmod -R a+r "$(distdir)"
633dist-gzip: distdir
634        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
635        $(am__post_remove_distdir)
636
637dist-bzip2: distdir
638        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
639        $(am__post_remove_distdir)
640
641dist-lzip: distdir
642        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
643        $(am__post_remove_distdir)
644
645dist-xz: distdir
646        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
647        $(am__post_remove_distdir)
648
649dist-tarZ: distdir
650        @echo WARNING: "Support for distribution archives compressed with" \
651                       "legacy program 'compress' is deprecated." >&2
652        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
653        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
654        $(am__post_remove_distdir)
655
656dist-shar: distdir
657        @echo WARNING: "Support for shar distribution archives is" \
658                       "deprecated." >&2
659        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
660        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
661        $(am__post_remove_distdir)
662
663dist-zip: distdir
664        -rm -f $(distdir).zip
665        zip -rq $(distdir).zip $(distdir)
666        $(am__post_remove_distdir)
667
668dist dist-all:
669        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
670        $(am__post_remove_distdir)
671
672# This target untars the dist file and tries a VPATH configuration.  Then
673# it guarantees that the distribution is self-contained by making another
674# tarfile.
675distcheck: dist
676        case '$(DIST_ARCHIVES)' in \
677        *.tar.gz*) \
678          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
679        *.tar.bz2*) \
680          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
681        *.tar.lz*) \
682          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
683        *.tar.xz*) \
684          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
685        *.tar.Z*) \
686          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
687        *.shar.gz*) \
688          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
689        *.zip*) \
690          unzip $(distdir).zip ;;\
691        esac
692        chmod -R a-w $(distdir)
693        chmod u+w $(distdir)
694        mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
695        chmod a-w $(distdir)
696        test -d $(distdir)/_build || exit 0; \
697        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
698          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
699          && am__cwd=`pwd` \
700          && $(am__cd) $(distdir)/_build/sub \
701          && ../../configure \
702            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
703            $(DISTCHECK_CONFIGURE_FLAGS) \
704            --srcdir=../.. --prefix="$$dc_install_base" \
705          && $(MAKE) $(AM_MAKEFLAGS) \
706          && $(MAKE) $(AM_MAKEFLAGS) dvi \
707          && $(MAKE) $(AM_MAKEFLAGS) check \
708          && $(MAKE) $(AM_MAKEFLAGS) install \
709          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
710          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
711          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
712                distuninstallcheck \
713          && chmod -R a-w "$$dc_install_base" \
714          && ({ \
715               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
716               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
717               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
718               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
719                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
720              } || { rm -rf "$$dc_destdir"; exit 1; }) \
721          && rm -rf "$$dc_destdir" \
722          && $(MAKE) $(AM_MAKEFLAGS) dist \
723          && rm -rf $(DIST_ARCHIVES) \
724          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
725          && cd "$$am__cwd" \
726          || exit 1
727        $(am__post_remove_distdir)
728        @(echo "$(distdir) archives ready for distribution: "; \
729          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
730          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
731distuninstallcheck:
732        @test -n '$(distuninstallcheck_dir)' || { \
733          echo 'ERROR: trying to run $@ with an empty' \
734               '$$(distuninstallcheck_dir)' >&2; \
735          exit 1; \
736        }; \
737        $(am__cd) '$(distuninstallcheck_dir)' || { \
738          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
739          exit 1; \
740        }; \
741        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
742           || { echo "ERROR: files left after uninstall:" ; \
743                if test -n "$(DESTDIR)"; then \
744                  echo "  (check DESTDIR support)"; \
745                fi ; \
746                $(distuninstallcheck_listfiles) ; \
747                exit 1; } >&2
748distcleancheck: distclean
749        @if test '$(srcdir)' = . ; then \
750          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
751          exit 1 ; \
752        fi
753        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
754          || { echo "ERROR: files left in build directory after distclean:" ; \
755               $(distcleancheck_listfiles) ; \
756               exit 1; } >&2
757check-am: all-am
758check: check-recursive
759all-am: Makefile $(MANS) config.h
760installdirs: installdirs-recursive
761installdirs-am:
762        for dir in "$(DESTDIR)$(man1dir)"; do \
763          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
764        done
765install: install-recursive
766install-exec: install-exec-recursive
767install-data: install-data-recursive
768uninstall: uninstall-recursive
769
770install-am: all-am
771        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
772
773installcheck: installcheck-recursive
774install-strip:
775        if test -z '$(STRIP)'; then \
776          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
777            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
778              install; \
779        else \
780          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
781            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
782            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
783        fi
784mostlyclean-generic:
785
786clean-generic:
787
788distclean-generic:
789        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
790        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
791
792maintainer-clean-generic:
793        @echo "This command is intended for maintainers to use"
794        @echo "it deletes files that may require special tools to rebuild."
795        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
796clean: clean-recursive
797
798clean-am: clean-generic mostlyclean-am
799
800distclean: distclean-recursive
801        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
802        -rm -f Makefile
803distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
804
805dvi: dvi-recursive
806
807dvi-am:
808
809html: html-recursive
810
811html-am:
812
813info: info-recursive
814
815info-am:
816
817install-data-am: install-man
818
819install-dvi: install-dvi-recursive
820
821install-dvi-am:
822
823install-exec-am:
824
825install-html: install-html-recursive
826
827install-html-am:
828
829install-info: install-info-recursive
830
831install-info-am:
832
833install-man: install-man1
834
835install-pdf: install-pdf-recursive
836
837install-pdf-am:
838
839install-ps: install-ps-recursive
840
841install-ps-am:
842
843installcheck-am:
844
845maintainer-clean: maintainer-clean-recursive
846        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
847        -rm -rf $(top_srcdir)/autom4te.cache
848        -rm -f Makefile
849maintainer-clean-am: distclean-am maintainer-clean-generic
850
851mostlyclean: mostlyclean-recursive
852
853mostlyclean-am: mostlyclean-generic
854
855pdf: pdf-recursive
856
857pdf-am:
858
859ps: ps-recursive
860
861ps-am:
862
863uninstall-am: uninstall-man
864
865uninstall-man: uninstall-man1
866
867.MAKE: $(am__recursive_targets) all install-am install-strip
868
869.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
870        am--refresh check check-am clean clean-cscope clean-generic \
871        cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
872        dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
873        distcheck distclean distclean-generic distclean-hdr \
874        distclean-tags distcleancheck distdir distuninstallcheck dvi \
875        dvi-am html html-am info info-am install install-am \
876        install-data install-data-am install-dvi install-dvi-am \
877        install-exec install-exec-am install-html install-html-am \
878        install-info install-info-am install-man install-man1 \
879        install-pdf install-pdf-am install-ps install-ps-am \
880        install-strip installcheck installcheck-am installdirs \
881        installdirs-am maintainer-clean maintainer-clean-generic \
882        mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
883        tags-am uninstall uninstall-am uninstall-man uninstall-man1
884
885.PRECIOUS: Makefile
886
887
888# Tell versions [3.59,3.63) of GNU make to not export all variables.
889# Otherwise a system limit (for SysV at least) may be exceeded.
890.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.