source: Jenkinsfile@ 7fe4cc3e

#!groovy

//===========================================================================================================
// Main compilation routine
//===========================================================================================================
//Compilation script is done here but environnement set-up and error handling is done in main loop
def cfa_build(boolean full_build) {
        build_stage 'Checkout'
                def install_dir = pwd tmp: true
                //checkout the source code and clean the repo
                checkout scm

                //Clean all temporary files to make sure no artifacts of the previous build remain
                sh 'git clean -fdqx'

                //Reset the git repo so no local changes persist
                sh 'git reset --hard'

        build_stage 'Build'

                //Configure the conpilation (Output is not relevant)
                //Use the current directory as the installation target so nothing
                //escapes the sandbox
                //Also specify the compiler by hand
                sh "./configure CXX=${currentCC.cpp_cc} --with-backend-compiler=${currentCC.cfa_backend_cc} --prefix=${install_dir} --enable-silent-rules --quiet"

                //Compile the project
                sh 'make -j 8 --no-print-directory V=0 install'

        build_stage 'Test'

                //Run the tests from the tests directory
                dir ('src/tests') {
                        if (full_build) {
                                sh 'make all-tests'
                        }
                        else {
                                sh 'make'
                        }
                }

        build_stage 'Cleanup'

                //do a maintainer-clean to make sure we need to remake from scratch
                sh 'make maintainer-clean > /dev/null'
}

def make_doc() {
        def err = null

        try {
                sh 'make clean > /dev/null'
                sh 'make > /dev/null 2>&1'
        }

        catch (Exception caughtError) {
                //rethrow error later
                err = caughtError

                sh 'cat *.log'
        }

        finally {
                /* Must re-throw exception to propagate error */
                if (err) {
                        throw err
                }
        }
}

def doc_build() {
        stage 'Documentation'

                status_prefix = 'Documentation'

                dir ('doc/user') {
                        make_doc()
                }

                dir ('doc/refrat') {
                        make_doc()
                }
}

def push_build() {
        //Don't use the build_stage function which outputs the compiler
        stage 'Push'

                status_prefix = 'Push'

                def out_dir = pwd tmp: true
                sh "mkdir -p ${out_dir}"

                //parse git logs to find what changed
                sh "git remote > ${out_dir}/GIT_REMOTE"
                git_remote = readFile("${out_dir}/GIT_REMOTE")
                remoteDoLangExists = git_remote.contains("DoLang")

                if( !remoteDoLangExists ) {
                        sh 'git remote add DoLang git@gitlab.do-lang.org:internal/cfa-cc.git'
                }

                sh "git push DoLang ${gitRefNewValue}:master"
}

//===========================================================================================================
// Helper classes/variables/routines to make the status and stage name easier to use
//===========================================================================================================
//Description of a compiler (Must be serializable since pipelines are persistent)
class CC_Desc implements Serializable {
        public String cc_name
        public String cpp_cc
        public String cfa_backend_cc

        CC_Desc(String cc_name, String cpp_cc, String cfa_backend_cc) {
                this.cc_name = cc_name
                this.cpp_cc = cpp_cc
                this.cfa_backend_cc = cfa_backend_cc
        }
}

//Global Variables defining the compiler and at which point in the build we are
// These variables are used but can't be declared before hand because of wierd scripting rules
// @Field String currentCC
// @Field String status_prefix

//Wrapper to sync stage name and status name
def build_stage(String name) {
        def stage_name = "${currentCC.cc_name} ${name}".trim()
        stage stage_name

                status_prefix = stage_name
}

//Helper routine to collect information about the git history
def collect_git_info() {

        //create the temporary output directory in case it doesn't already exist
        def out_dir = pwd tmp: true
        sh "mkdir -p ${out_dir}"

        //parse git logs to find what changed
        gitRefName = env.BRANCH_NAME
        dir("../${gitRefName}@script") {
                sh "git reflog > ${out_dir}/GIT_COMMIT"
        }
        git_reflog = readFile("${out_dir}/GIT_COMMIT")
        gitRefOldValue = (git_reflog =~ /moving from (.+) to (.+)/)[0][1]
        gitRefNewValue = (git_reflog =~ /moving from (.+) to (.+)/)[0][2]
}

//===========================================================================================================
// Main loop of the compilation
//===========================================================================================================
node ('master'){

        boolean doPromoteBuild2DoLang
        def err = null
        def log_needed = false
        currentBuild.result = "SUCCESS"
        status_prefix = ''

        try {
                //Prevent the build from exceeding 30 minutes
                timeout(60) {

                        //Wrap build to add timestamp to command line
                        wrap([$class: 'TimestamperBuildWrapper']) {

                                collect_git_info()

                                properties ([                                                                   \
                                        [$class: 'ParametersDefinitionProperty',                                \
                                                parameterDefinitions: [                                         \
                                                [$class: 'BooleanParameterDefinition',                          \
                                                  defaultValue: false,                                          \
                                                  description: 'If true, the build will be promoted to the do-lang git repository (on successful builds only)', \
                                                  name: 'promoteBuild2DoLang'                           \
                                                ]]                                                                      \
                                        ]])

                                doPromoteBuild2DoLang = promoteBuild2DoLang == 'true'

                                echo "FULL BUILD = ${doPromoteBuild2DoLang}"

                                //Compile using gcc-4.9
                                currentCC = new CC_Desc('gcc-4.9', 'g++-4.9', 'gcc-4.9')
                                cfa_build(doPromoteBuild2DoLang)

                                //Compile latex documentation
                                doc_build()

                                if( doPromoteBuild2DoLang ) {
                                        //Compile using gcc-5
                                        currentCC = new CC_Desc('gcc-5', 'g++-5', 'gcc-5')
                                        cfa_build(true)

                                        //Compile using gcc-4.9
                                        currentCC = new CC_Desc('gcc-6', 'g++-6', 'gcc-6')
                                        cfa_build(true)

                                        //Push latest changes to do-lang repo
                                        push_build()
                                }
                        }
                }
        }

        //If an exception is caught we need to change the status and remember to
        //attach the build log to the email
        catch (Exception caughtError) {
                //rethrow error later
                err = caughtError

                //An error has occured, the build log is relevent
                log_needed = true

                //Store the result of the build log
                currentBuild.result = "${status_prefix} FAILURE".trim()
        }

        finally {
                //Send email with final results
                notify_result(doPromoteBuild2DoLang, err, currentBuild.result, log_needed)

                /* Must re-throw exception to propagate error */
                if (err) {
                        throw err
                }
        }
}

//===========================================================================================================
//Routine responsible of sending the email notification once the build is completed
//===========================================================================================================
def notify_result(boolean promote, Exception err, String status, boolean log) {
        echo 'Build completed, sending result notification'
        if(promote)     {
                if( err ) {
                        promote_email(status)
                }
        }
        else {
                email(status, log)
        }
}

//Email notification on a full build failure
def promote_email(String status) {
        //Since tokenizer doesn't work, figure stuff out from the environnement variables and command line
        //Configurations for email format
        def email_subject = "[cforall git][PROMOTE - FAILURE]"
        def email_body = """This is an automated email from the Jenkins build machine. It was
generated because of a git hooks/post-receive script following
a ref change was pushed to the repository containing
the project "UNNAMED PROJECT".

Check console output at ${env.BUILD_URL} to view the results.

- Status --------------------------------------------------------------

PROMOTE FAILURE - ${status}
"""

        def email_to = "pabuhr@uwaterloo.ca, rschlunt@uwaterloo.ca, a3moss@uwaterloo.ca, tdelisle@uwaterloo.ca, brice.dobry@huawei.com"

        //send email notification
        emailext body: email_body, subject: email_subject, to: email_to, attachLog: true
}

//Standard build email notification
def email(String status, boolean log) {
        //Since tokenizer doesn't work, figure stuff out from the environnement variables and command line
        //Configurations for email format
        def project_name = (env.JOB_NAME =~ /(.+)\/.+/)[0][1].toLowerCase()

        def gitLog = 'Error retrieving git logs'
        def gitDiff = 'Error retrieving git diff'

        try {

                sh "git rev-list --format=short ${gitRefOldValue}...${gitRefNewValue} > GIT_LOG"
                gitLog = readFile('GIT_LOG')

                sh "git diff --stat ${gitRefNewValue} ${gitRefOldValue} > GIT_DIFF"
                gitDiff = readFile('GIT_DIFF')
        }
        catch (Exception error) {}

        def email_subject = "[${project_name} git][BUILD# ${env.BUILD_NUMBER} - ${status}] - branch ${env.BRANCH_NAME}"
        def email_body = """This is an automated email from the Jenkins build machine. It was
generated because of a git hooks/post-receive script following
a ref change was pushed to the repository containing
the project "UNNAMED PROJECT".

The branch ${env.BRANCH_NAME} has been updated.
   via  ${gitRefOldValue} (commit)
  from  ${gitRefNewValue} (commit)

Check console output at ${env.BUILD_URL} to view the results.

- Status --------------------------------------------------------------

BUILD# ${env.BUILD_NUMBER} - ${status}

- Log -----------------------------------------------------------------
${gitLog}
-----------------------------------------------------------------------
Summary of changes:
${gitDiff}
"""

        def email_to = "pabuhr@uwaterloo.ca, rschlunt@uwaterloo.ca, a3moss@uwaterloo.ca, tdelisle@uwaterloo.ca, brice.dobry@huawei.com"

        //send email notification
        emailext body: email_body, subject: email_subject, to: email_to, attachLog: log
}