source: Jenkinsfile @ e66ef08

ADTaaron-thesisarm-ehast-experimentalcleanup-dtorsctordeferred_resndemanglerenumforall-pointer-decayjacob/cs343-translationjenkins-sandboxmemorynew-astnew-ast-unique-exprnew-envno_listpersistent-indexerpthread-emulationqualifiedEnumresolv-newwith_gc
Last change on this file since e66ef08 was e66ef08, checked in by Thierry Delisle <tdelisle@…>, 8 years ago

Jenkinsfile now uses proper choice properties

  • Property mode set to 100644
File size: 9.6 KB
RevLine 
[a63ad80]1#!groovy
2
[29f4fe62]3//===========================================================================================================
4// Main compilation routine
5//===========================================================================================================
6//Compilation script is done here but environnement set-up and error handling is done in main loop
[7ef1555e]7def cfa_build(boolean full_build) {
[77f347d]8        build_stage 'Checkout'
[992c26d]9                def install_dir = pwd tmp: true
[77f347d]10                //checkout the source code and clean the repo
[3151e3b]11                checkout scm
[56a9ce6]12
13                //Clean all temporary files to make sure no artifacts of the previous build remain
[01b8088d]14                sh 'git clean -fdqx'
[56a9ce6]15
16                //Reset the git repo so no local changes persist
[01b8088d]17                sh 'git reset --hard'
[23a14d86]18
[77f347d]19        build_stage 'Build'
[7aebc62]20
[77f347d]21                //Configure the conpilation (Output is not relevant)
22                //Use the current directory as the installation target so nothing
23                //escapes the sandbox
24                //Also specify the compiler by hand
[fd61a4f]25                sh "./configure CXX=${currentCC.cpp_cc} --with-backend-compiler=${currentCC.cfa_backend_cc} --prefix=${install_dir} --enable-silent-rules --quiet"
[fde808df]26
[77f347d]27                //Compile the project
[245510f]28                sh 'make -j 8 --no-print-directory V=0 install'
[fde808df]29
[77f347d]30        build_stage 'Test'
[fde808df]31
[cb64fd6]32                //Run the tests from the tests directory
[fd61a4f]33                dir ('src/tests') {
[7ef1555e]34                        if (full_build) {
[b015035]35                                sh 'make all-tests'
[7ef1555e]36                        }
37                        else {
[b015035]38                                sh 'make'
[7ef1555e]39                        }
[77f347d]40                }
[fde808df]41
[77f347d]42        build_stage 'Cleanup'
[7359098]43
[86f641b]44                //do a maintainer-clean to make sure we need to remake from scratch
45                sh 'make maintainer-clean > /dev/null'
[77f347d]46}
[7359098]47
[738cf8f]48def make_doc() {
49        def err = null
50
51        try {
52                sh 'make clean > /dev/null'
53                sh 'make > /dev/null 2>&1'
54        }
55
56        catch (Exception caughtError) {
57                //rethrow error later
58                err = caughtError
59
60                sh 'cat *.log'
61        }
62
63        finally {
64                /* Must re-throw exception to propagate error */
65                if (err) {
66                        throw err
67                }
68        }
69}
70
[18e2758]71def doc_build() {
[fa234ef]72        stage 'Documentation'
73
74                status_prefix = 'Documentation'
[18e2758]75
76                dir ('doc/user') {
[738cf8f]77                        make_doc()
[18e2758]78                }
79
80                dir ('doc/refrat') {
[738cf8f]81                        make_doc()
[18e2758]82                }
83}
84
[a235d09]85def push_build() {
[1a66280]86        //Don't use the build_stage function which outputs the compiler
87        stage 'Push'
88
89                status_prefix = 'Push'
[a235d09]90
[e034675]91                def out_dir = pwd tmp: true
92                sh "mkdir -p ${out_dir}"
93
94                //parse git logs to find what changed
95                sh "git remote > ${out_dir}/GIT_REMOTE"
96                git_remote = readFile("${out_dir}/GIT_REMOTE")
97                remoteDoLangExists = git_remote.contains("DoLang")
98
99                if( !remoteDoLangExists ) {
100                        sh 'git remote add DoLang git@gitlab.do-lang.org:internal/cfa-cc.git'
101                }
102
[afab6dc]103                sh "git push DoLang ${gitRefNewValue}:master"
[a235d09]104}
105
[29f4fe62]106//===========================================================================================================
107// Helper classes/variables/routines to make the status and stage name easier to use
108//===========================================================================================================
[e730560]109//Description of a compiler (Must be serializable since pipelines are persistent)
110class CC_Desc implements Serializable {
[8f6b229]111        public String cc_name
112        public String cpp_cc
113        public String cfa_backend_cc
[f25bcb6]114
115        CC_Desc(String cc_name, String cpp_cc, String cfa_backend_cc) {
116                this.cc_name = cc_name
117                this.cpp_cc = cpp_cc
118                this.cfa_backend_cc = cfa_backend_cc
119        }
[992c26d]120}
121
[29f4fe62]122//Global Variables defining the compiler and at which point in the build we are
[aec9a67]123// These variables are used but can't be declared before hand because of wierd scripting rules
124// @Field String currentCC
125// @Field String status_prefix
[fde808df]126
[29f4fe62]127//Wrapper to sync stage name and status name
[77f347d]128def build_stage(String name) {
[8f6b229]129        def stage_name = "${currentCC.cc_name} ${name}".trim()
[77f347d]130        stage stage_name
[fde808df]131
[77f347d]132                status_prefix = stage_name
133}
[fde808df]134
[ab60d6d]135//Helper routine to collect information about the git history
136def collect_git_info() {
137
[abc26975]138        //create the temporary output directory in case it doesn't already exist
[ab60d6d]139        def out_dir = pwd tmp: true
[abc26975]140        sh "mkdir -p ${out_dir}"
141
142        //parse git logs to find what changed
[ab60d6d]143        gitRefName = env.BRANCH_NAME
144        dir("../${gitRefName}@script") {
145                sh "git reflog > ${out_dir}/GIT_COMMIT"
146        }
147        git_reflog = readFile("${out_dir}/GIT_COMMIT")
148        gitRefOldValue = (git_reflog =~ /moving from (.+) to (.+)/)[0][1]
149        gitRefNewValue = (git_reflog =~ /moving from (.+) to (.+)/)[0][2]
150}
151
[29f4fe62]152//===========================================================================================================
153// Main loop of the compilation
154//===========================================================================================================
[77f347d]155node ('master'){
[fde808df]156
[b8f8696]157        boolean doPromoteBuild2DoLang
[aeac573]158        buildArchitecture = ''
[77f347d]159        def err = null
160        def log_needed = false
[ab60d6d]161        currentBuild.result = "SUCCESS"
[c7449ce2]162        status_prefix = ''
[77f347d]163
164        try {
[0207e71]165                //Prevent the build from exceeding 30 minutes
[18e2758]166                timeout(60) {
[40b1df9]167
[37bf576]168                        //Wrap build to add timestamp to command line
169                        wrap([$class: 'TimestamperBuildWrapper']) {
[29f4fe62]170
[7b1a604]171                                collect_git_info()
172
[9e5f409]173                                properties ([                                                                   \
174                                        [$class: 'ParametersDefinitionProperty',                                \
175                                                parameterDefinitions: [                                         \
176                                                [$class: 'BooleanParameterDefinition',                          \
177                                                  defaultValue: false,                                          \
178                                                  description: 'If true, the build will be promoted to the do-lang git repository (on successful builds only)', \
[c13d970]179                                                  name: 'promoteBuild2DoLang'                                   \
[c617272]180                                                ],                                                              \
[e66ef08]181                                                [$class: 'ChoiceParameterDefinition',                           \
182                                                  choices: ['64-bit', '32-bit'],                                \
[1b6a23e]183                                                  description: 'The architecture to use for compilation',       \
184                                                  name: 'buildArchitecture'                                     \
[c13d970]185                                                ]]                                                              \
[9e5f409]186                                        ]])
187
[b8f8696]188                                doPromoteBuild2DoLang = promoteBuild2DoLang == 'true'
[1b6a23e]189
[ef77d9c]190
191                                echo "FULL BUILD = ${doPromoteBuild2DoLang}"
[1b6a23e]192                               
[e66ef08]193                                architectureFlag = buildArchitecture == '64-bit' ? '-m64' : (buildArchitecture == '32-bit' ? '-m32' : 'ERROR')
[c13d970]194                                echo "Architecture = ${buildArchitecture} (flag ${architectureFlag})"
195                                echo
[9e5f409]196
[29f4fe62]197                                //Compile using gcc-4.9
[f979c4a]198                                currentCC = new CC_Desc('gcc-4.9', 'g++-4.9', 'gcc-4.9')
[b3ac2d6b]199                                cfa_build(doPromoteBuild2DoLang)
[29f4fe62]200
[d56c05d0]201                                //Compile latex documentation
202                                doc_build()
203
[b015035]204                                if( doPromoteBuild2DoLang ) {
205                                        //Compile using gcc-5
206                                        currentCC = new CC_Desc('gcc-5', 'g++-5', 'gcc-5')
207                                        cfa_build(true)
[40b1df9]208
[b015035]209                                        //Compile using gcc-4.9
210                                        currentCC = new CC_Desc('gcc-6', 'g++-6', 'gcc-6')
211                                        cfa_build(true)
[40b1df9]212
[d56c05d0]213                                        //Push latest changes to do-lang repo
[a235d09]214                                        push_build()
215                                }
[37bf576]216                        }
[0207e71]217                }
[f43a200]218        }
219
[29f4fe62]220        //If an exception is caught we need to change the status and remember to
221        //attach the build log to the email
[fde808df]222        catch (Exception caughtError) {
[29f4fe62]223                //rethrow error later
[fde808df]224                err = caughtError
[29f4fe62]225
226                //An error has occured, the build log is relevent
[b287f67]227                log_needed = true
[29f4fe62]228
229                //Store the result of the build log
[992c26d]230                currentBuild.result = "${status_prefix} FAILURE".trim()
[fde808df]231        }
232
233        finally {
234                //Send email with final results
[18f69df]235                //notify_result(doPromoteBuild2DoLang, err, currentBuild.result, log_needed)
[fde808df]236
237                /* Must re-throw exception to propagate error */
238                if (err) {
239                        throw err
240                }
[d3d0069]241        }
[7aebc62]242}
[f2b977a]243
[29f4fe62]244//===========================================================================================================
245//Routine responsible of sending the email notification once the build is completed
246//===========================================================================================================
[1a66280]247def notify_result(boolean promote, Exception err, String status, boolean log) {
[3151e3b]248        echo 'Build completed, sending result notification'
[a235d09]249        if(promote)     {
[1a66280]250                if( err ) {
[a235d09]251                        promote_email(status)
252                }
253        }
254        else {
255                email(status, log)
256        }
257}
258
259//Email notification on a full build failure
260def promote_email(String status) {
261        //Since tokenizer doesn't work, figure stuff out from the environnement variables and command line
262        //Configurations for email format
263        def email_subject = "[cforall git][PROMOTE - FAILURE]"
264        def email_body = """This is an automated email from the Jenkins build machine. It was
265generated because of a git hooks/post-receive script following
266a ref change was pushed to the repository containing
267the project "UNNAMED PROJECT".
268
269Check console output at ${env.BUILD_URL} to view the results.
270
271- Status --------------------------------------------------------------
272
273PROMOTE FAILURE - ${status}
274"""
275
276        def email_to = "pabuhr@uwaterloo.ca, rschlunt@uwaterloo.ca, a3moss@uwaterloo.ca, tdelisle@uwaterloo.ca, brice.dobry@huawei.com"
277
278        //send email notification
279        emailext body: email_body, subject: email_subject, to: email_to, attachLog: true
280}
281
282//Standard build email notification
[19ad15b]283def email(String status, boolean log) {
[e8a22a7]284        //Since tokenizer doesn't work, figure stuff out from the environnement variables and command line
285        //Configurations for email format
286        def project_name = (env.JOB_NAME =~ /(.+)\/.+/)[0][1].toLowerCase()
287
[0a346e5]288        def gitLog = 'Error retrieving git logs'
289        def gitDiff = 'Error retrieving git diff'
[7b1a604]290
[0a346e5]291        try {
292
293                sh "git rev-list --format=short ${gitRefOldValue}...${gitRefNewValue} > GIT_LOG"
294                gitLog = readFile('GIT_LOG')
295
296                sh "git diff --stat ${gitRefNewValue} ${gitRefOldValue} > GIT_DIFF"
297                gitDiff = readFile('GIT_DIFF')
298        }
299        catch (Exception error) {}
[7b1a604]300
[992c26d]301        def email_subject = "[${project_name} git][BUILD# ${env.BUILD_NUMBER} - ${status}] - branch ${env.BRANCH_NAME}"
[848fb00]302        def email_body = """This is an automated email from the Jenkins build machine. It was
303generated because of a git hooks/post-receive script following
304a ref change was pushed to the repository containing
305the project "UNNAMED PROJECT".
[e8a22a7]306
[848fb00]307The branch ${env.BRANCH_NAME} has been updated.
[a235d09]308   via  ${gitRefOldValue} (commit)
309  from  ${gitRefNewValue} (commit)
[7b1a604]310
311Check console output at ${env.BUILD_URL} to view the results.
312
313- Status --------------------------------------------------------------
314
315BUILD# ${env.BUILD_NUMBER} - ${status}
[e8a22a7]316
[7b1a604]317- Log -----------------------------------------------------------------
318${gitLog}
319-----------------------------------------------------------------------
320Summary of changes:
321${gitDiff}
322"""
[e8a22a7]323
[a6b7480]324        def email_to = "pabuhr@uwaterloo.ca, rschlunt@uwaterloo.ca, a3moss@uwaterloo.ca, tdelisle@uwaterloo.ca, brice.dobry@huawei.com"
[e8a22a7]325
326        //send email notification
[1e34653]327        emailext body: email_body, subject: email_subject, to: email_to, attachLog: log
[e8a22a7]328}
Note: See TracBrowser for help on using the repository browser.