// // Cforall Version 1.0.0 Copyright (C) 2016 University of Waterloo // // The contents of this file are covered under the licence agreement in the // file "LICENCE" distributed with Cforall. // // signal.c -- // // Author : Thierry Delisle // Created On : Mon Jun 5 14:20:42 2017 // Last Modified By : Peter A. Buhr // Last Modified On : Fri Nov 6 07:42:13 2020 // Update Count : 54 // #define __cforall_thread__ #include "preemption.hfa" #include #include #include #include #include #include // PTHREAD_STACK_MIN #include "bits/signal.hfa" #include "kernel_private.hfa" #if !defined(__CFA_DEFAULT_PREEMPTION__) #define __CFA_DEFAULT_PREEMPTION__ 10`ms #endif Duration default_preemption() __attribute__((weak)) { return __CFA_DEFAULT_PREEMPTION__; } // FwdDeclarations : timeout handlers static void preempt( processor * this ); static void timeout( $thread * this ); // FwdDeclarations : Signal handlers static void sigHandler_ctxSwitch( __CFA_SIGPARMS__ ); static void sigHandler_alarm ( __CFA_SIGPARMS__ ); static void sigHandler_segv ( __CFA_SIGPARMS__ ); static void sigHandler_ill ( __CFA_SIGPARMS__ ); static void sigHandler_fpe ( __CFA_SIGPARMS__ ); static void sigHandler_abort ( __CFA_SIGPARMS__ ); // FwdDeclarations : alarm thread main static void * alarm_loop( __attribute__((unused)) void * args ); // Machine specific register name #if defined( __i386 ) #define CFA_REG_IP gregs[REG_EIP] #elif defined( __x86_64 ) #define CFA_REG_IP gregs[REG_RIP] #elif defined( __arm__ ) #define CFA_REG_IP arm_pc #elif defined( __aarch64__ ) #define CFA_REG_IP pc #else #error unsupported hardware architecture #endif KERNEL_STORAGE(event_kernel_t, event_kernel); // private storage for event kernel event_kernel_t * event_kernel; // kernel public handle to even kernel static pthread_t alarm_thread; // pthread handle to alarm thread static void * alarm_stack; // pthread stack for alarm thread static void ?{}(event_kernel_t & this) with( this ) { alarms{}; lock{}; } enum { PREEMPT_NORMAL = 0, PREEMPT_TERMINATE = 1, }; //============================================================================================= // Kernel Preemption logic //============================================================================================= // Get next expired node static inline alarm_node_t * get_expired( alarm_list_t * alarms, Time currtime ) { if( ! & (*alarms)`first ) return 0p; // If no alarms return null if( (*alarms)`first.alarm >= currtime ) return 0p; // If alarms head not expired return null return pop(alarms); // Otherwise just pop head } // Tick one frame of the Discrete Event Simulation for alarms static void tick_preemption(void) { alarm_node_t * node = 0p; // Used in the while loop but cannot be declared in the while condition alarm_list_t * alarms = &event_kernel->alarms; // Local copy for ease of reading Time currtime = __kernel_get_time(); // Check current time once so everything "happens at once" //Loop throught every thing expired while( node = get_expired( alarms, currtime ) ) { // __cfaabi_dbg_print_buffer_decl( " KERNEL: preemption tick.\n" ); Duration period = node->period; if( period == 0) { node->set = false; // Node is one-shot, just mark it as not pending } // Check if this is a kernel if( node->type == Kernel ) { preempt( node->proc ); } else if( node->type == User ) { timeout( node->thrd ); } else { node->callback(*node); } // Check if this is a periodic alarm if( period > 0 ) { // __cfaabi_dbg_print_buffer_local( " KERNEL: alarm period is %lu.\n", period.tv ); node->alarm = currtime + period; // Alarm is periodic, add currtime to it (used cached current time) insert( alarms, node ); // Reinsert the node for the next time it triggers } } // If there are still alarms pending, reset the timer if( & (*alarms)`first ) { __cfadbg_print_buffer_decl(preemption, " KERNEL: @%ju(%ju) resetting alarm to %ju.\n", currtime.tv, __kernel_get_time().tv, (alarms->head->alarm - currtime).tv); Duration delta = (*alarms)`first.alarm - currtime; Duration capped = max(delta, 50`us); // itimerval tim = { caped }; // __cfaabi_dbg_print_buffer_local( " Values are %lu, %lu, %lu %lu.\n", delta.tv, caped.tv, tim.it_value.tv_sec, tim.it_value.tv_usec); __kernel_set_timer( capped ); } } // Update the preemption of a processor and notify interested parties void update_preemption( processor * this, Duration duration ) { alarm_node_t * alarm = this->preemption_alarm; // Alarms need to be enabled if ( duration > 0 && ! alarm->set ) { alarm->alarm = __kernel_get_time() + duration; alarm->period = duration; register_self( alarm ); } // Zero duration but alarm is set else if ( duration == 0 && alarm->set ) { unregister_self( alarm ); alarm->alarm = 0; alarm->period = 0; } // If alarm is different from previous, change it else if ( duration > 0 && alarm->period != duration ) { unregister_self( alarm ); alarm->alarm = __kernel_get_time() + duration; alarm->period = duration; register_self( alarm ); } } //============================================================================================= // Kernel Signal Tools //============================================================================================= // In a user-level threading system, there are handful of thread-local variables where this problem occurs on the ARM. // // For each kernel thread running user-level threads, there is a flag variable to indicate if interrupts are // enabled/disabled for that kernel thread. Therefore, this variable is made thread local. // // For example, this code fragment sets the state of the "interrupt" variable in thread-local memory. // // _Thread_local volatile int interrupts; // int main() { // interrupts = 0; // disable interrupts } // // which generates the following code on the ARM // // (gdb) disassemble main // Dump of assembler code for function main: // 0x0000000000000610 <+0>: mrs x1, tpidr_el0 // 0x0000000000000614 <+4>: mov w0, #0x0 // #0 // 0x0000000000000618 <+8>: add x1, x1, #0x0, lsl #12 // 0x000000000000061c <+12>: add x1, x1, #0x10 // 0x0000000000000620 <+16>: str wzr, [x1] // 0x0000000000000624 <+20>: ret // // The mrs moves a pointer from coprocessor register tpidr_el0 into register x1. Register w0 is set to 0. The two adds // increase the TLS pointer with the displacement (offset) 0x10, which is the location in the TSL of variable // "interrupts". Finally, 0 is stored into "interrupts" through the pointer in register x1 that points into the // TSL. Now once x1 has the pointer to the location of the TSL for kernel thread N, it can be be preempted at a // user-level and the user thread is put on the user-level ready-queue. When the preempted thread gets to the front of // the user-level ready-queue it is run on kernel thread M. It now stores 0 into "interrupts" back on kernel thread N, // turning off interrupt on the wrong kernel thread. // // On the x86, the following code is generated for the same code fragment. // // (gdb) disassemble main // Dump of assembler code for function main: // 0x0000000000400420 <+0>: movl $0x0,%fs:0xfffffffffffffffc // 0x000000000040042c <+12>: xor %eax,%eax // 0x000000000040042e <+14>: retq // // and there is base-displacement addressing used to atomically reset variable "interrupts" off of the TSL pointer in // register "fs". // // Hence, the ARM has base-displacement address for the general purpose registers, BUT not to the coprocessor // registers. As a result, generating the address for the write into variable "interrupts" is no longer atomic. // // Note this problem does NOT occur when just using multiple kernel threads because the preemption ALWAYS restarts the // thread on the same kernel thread. // // The obvious question is why does ARM use a coprocessor register to store the TSL pointer given that coprocessor // registers are second-class registers with respect to the instruction set. One possible answer is that they did not // want to dedicate one of the general registers to hold the TLS pointer and there was a free coprocessor register // available. //----------------------------------------------------------------------------- // Some assembly required #define __cfaasm_label(label, when) when: asm volatile goto(".global __cfaasm_" #label "_" #when "\n" "__cfaasm_" #label "_" #when ":":::"memory":when) //---------- // special case for preemption since used often bool __preemption_enabled() { // create a assembler label before // marked as clobber all to avoid movement __cfaasm_label(check, before); // access tls as normal bool enabled = __cfaabi_tls.preemption_state.enabled; // create a assembler label after // marked as clobber all to avoid movement __cfaasm_label(check, after); return enabled; } struct asm_region { void * before; void * after; }; static inline bool __cfaasm_in( void * ip, struct asm_region & region ) { return ip >= region.before && ip <= region.after; } //---------- // Get data from the TLS block // struct asm_region __cfaasm_get; uintptr_t __cfatls_get( unsigned long int offset ) __attribute__((__noinline__)); //no inline to avoid problems uintptr_t __cfatls_get( unsigned long int offset ) { // create a assembler label before // marked as clobber all to avoid movement __cfaasm_label(get, before); // access tls as normal (except for pointer arithmetic) uintptr_t val = *(uintptr_t*)((uintptr_t)&__cfaabi_tls + offset); // create a assembler label after // marked as clobber all to avoid movement __cfaasm_label(get, after); return val; } extern "C" { // Disable interrupts by incrementing the counter void disable_interrupts() { // create a assembler label before // marked as clobber all to avoid movement __cfaasm_label(dsable, before); with( __cfaabi_tls.preemption_state ) { #if GCC_VERSION > 50000 static_assert(__atomic_always_lock_free(sizeof(enabled), &enabled), "Must be lock-free"); #endif // Set enabled flag to false // should be atomic to avoid preemption in the middle of the operation. // use memory order RELAXED since there is no inter-thread on this variable requirements __atomic_store_n(&enabled, false, __ATOMIC_RELAXED); // Signal the compiler that a fence is needed but only for signal handlers __atomic_signal_fence(__ATOMIC_ACQUIRE); __attribute__((unused)) unsigned short new_val = disable_count + 1; disable_count = new_val; verify( new_val < 65_000u ); // If this triggers someone is disabling interrupts without enabling them } // create a assembler label after // marked as clobber all to avoid movement __cfaasm_label(dsable, after); } // Enable interrupts by decrementing the counter // If counter reaches 0, execute any pending __cfactx_switch void enable_interrupts( __cfaabi_dbg_ctx_param ) { // Cache the processor now since interrupts can start happening after the atomic store processor * proc = __cfaabi_tls.this_processor; /* paranoid */ verify( proc ); with( __cfaabi_tls.preemption_state ){ unsigned short prev = disable_count; disable_count -= 1; // If this triggers someone is enabled already enabled interruptsverify( prev != 0u ); /* paranoid */ verify( prev != 0u ); // Check if we need to prempt the thread because an interrupt was missed if( prev == 1 ) { #if GCC_VERSION > 50000 static_assert(__atomic_always_lock_free(sizeof(enabled), &enabled), "Must be lock-free"); #endif // Set enabled flag to true // should be atomic to avoid preemption in the middle of the operation. // use memory order RELAXED since there is no inter-thread on this variable requirements __atomic_store_n(&enabled, true, __ATOMIC_RELAXED); // Signal the compiler that a fence is needed but only for signal handlers __atomic_signal_fence(__ATOMIC_RELEASE); if( proc->pending_preemption ) { proc->pending_preemption = false; force_yield( __POLL_PREEMPTION ); } } } // For debugging purposes : keep track of the last person to enable the interrupts __cfaabi_dbg_debug_do( proc->last_enable = caller; ) } // Disable interrupts by incrementint the counter // Don't execute any pending __cfactx_switch even if counter reaches 0 void enable_interrupts_noPoll() { unsigned short prev = __cfaabi_tls.preemption_state.disable_count; __cfaabi_tls.preemption_state.disable_count -= 1; // If this triggers someone is enabled already enabled interrupts /* paranoid */ verifyf( prev != 0u, "Incremented from %u\n", prev ); if( prev == 1 ) { #if GCC_VERSION > 50000 static_assert(__atomic_always_lock_free(sizeof(__cfaabi_tls.preemption_state.enabled), &__cfaabi_tls.preemption_state.enabled), "Must be lock-free"); #endif // Set enabled flag to true // should be atomic to avoid preemption in the middle of the operation. // use memory order RELAXED since there is no inter-thread on this variable requirements __atomic_store_n(&__cfaabi_tls.preemption_state.enabled, true, __ATOMIC_RELAXED); // Signal the compiler that a fence is needed but only for signal handlers __atomic_signal_fence(__ATOMIC_RELEASE); } } } //----------------------------------------------------------------------------- // Kernel Signal Debug void __cfaabi_check_preemption() { bool ready = __preemption_enabled(); if(!ready) { abort("Preemption should be ready"); } __cfaasm_label(debug, before); sigset_t oldset; int ret; ret = pthread_sigmask(0, ( const sigset_t * ) 0p, &oldset); // workaround trac#208: cast should be unnecessary if(ret != 0) { abort("ERROR sigprocmask returned %d", ret); } ret = sigismember(&oldset, SIGUSR1); if(ret < 0) { abort("ERROR sigismember returned %d", ret); } if(ret == 1) { abort("ERROR SIGUSR1 is disabled"); } ret = sigismember(&oldset, SIGALRM); if(ret < 0) { abort("ERROR sigismember returned %d", ret); } if(ret == 0) { abort("ERROR SIGALRM is enabled"); } ret = sigismember(&oldset, SIGTERM); if(ret < 0) { abort("ERROR sigismember returned %d", ret); } if(ret == 1) { abort("ERROR SIGTERM is disabled"); } __cfaasm_label(debug, after); } #ifdef __CFA_WITH_VERIFY__ bool __cfaabi_dbg_in_kernel() { return !__preemption_enabled(); } #endif #undef __cfaasm_label //----------------------------------------------------------------------------- // Signal handling // sigprocmask wrapper : unblock a single signal static inline void signal_unblock( int sig ) { sigset_t mask; sigemptyset( &mask ); sigaddset( &mask, sig ); if ( pthread_sigmask( SIG_UNBLOCK, &mask, 0p ) == -1 ) { abort( "internal error, pthread_sigmask" ); } } // sigprocmask wrapper : block a single signal static inline void signal_block( int sig ) { sigset_t mask; sigemptyset( &mask ); sigaddset( &mask, sig ); if ( pthread_sigmask( SIG_BLOCK, &mask, 0p ) == -1 ) { abort( "internal error, pthread_sigmask" ); } } // kill wrapper : signal a processor static void preempt( processor * this ) { sigval_t value = { PREEMPT_NORMAL }; pthread_sigqueue( this->kernel_thread, SIGUSR1, value ); } // reserved for future use static void timeout( $thread * this ) { unpark( this ); } //----------------------------------------------------------------------------- // Some assembly required #if defined( __i386 ) #ifdef __PIC__ #define RELOC_PRELUDE( label ) \ "calll .Lcfaasm_prelude_" #label "$pb\n\t" \ ".Lcfaasm_prelude_" #label "$pb:\n\t" \ "popl %%eax\n\t" \ ".Lcfaasm_prelude_" #label "_end:\n\t" \ "addl $_GLOBAL_OFFSET_TABLE_+(.Lcfaasm_prelude_" #label "_end-.Lcfaasm_prelude_" #label "$pb), %%eax\n\t" #define RELOC_PREFIX "" #define RELOC_SUFFIX "@GOT(%%eax)" #else #define RELOC_PREFIX "$" #define RELOC_SUFFIX "" #endif #define __cfaasm_label( label ) struct asm_region label = \ ({ \ struct asm_region region; \ asm( \ RELOC_PRELUDE( label ) \ "movl " RELOC_PREFIX "__cfaasm_" #label "_before" RELOC_SUFFIX ", %[vb]\n\t" \ "movl " RELOC_PREFIX "__cfaasm_" #label "_after" RELOC_SUFFIX ", %[va]\n\t" \ : [vb]"=r"(region.before), [va]"=r"(region.after) \ ); \ region; \ }); #elif defined( __x86_64 ) #ifdef __PIC__ #define RELOC_PREFIX "" #define RELOC_SUFFIX "@GOTPCREL(%%rip)" #else #define RELOC_PREFIX "$" #define RELOC_SUFFIX "" #endif #define __cfaasm_label( label ) struct asm_region label = \ ({ \ struct asm_region region; \ asm( \ "movq " RELOC_PREFIX "__cfaasm_" #label "_before" RELOC_SUFFIX ", %[vb]\n\t" \ "movq " RELOC_PREFIX "__cfaasm_" #label "_after" RELOC_SUFFIX ", %[va]\n\t" \ : [vb]"=r"(region.before), [va]"=r"(region.after) \ ); \ region; \ }); #elif defined( __aarch64__ ) #ifdef __PIC__ // Note that this works only for gcc #define __cfaasm_label( label ) struct asm_region label = \ ({ \ struct asm_region region; \ asm( \ "adrp %[vb], _GLOBAL_OFFSET_TABLE_" "\n\t" \ "ldr %[vb], [%[vb], #:gotpage_lo15:__cfaasm_" #label "_before]" "\n\t" \ "adrp %[va], _GLOBAL_OFFSET_TABLE_" "\n\t" \ "ldr %[va], [%[va], #:gotpage_lo15:__cfaasm_" #label "_after]" "\n\t" \ : [vb]"=r"(region.before), [va]"=r"(region.after) \ ); \ region; \ }); #else #error this is not the right thing to do /* #define __cfaasm_label( label ) struct asm_region label = \ ({ \ struct asm_region region; \ asm( \ "adrp %[vb], __cfaasm_" #label "_before" "\n\t" \ "add %[vb], %[vb], :lo12:__cfaasm_" #label "_before" "\n\t" \ "adrp %[va], :got:__cfaasm_" #label "_after" "\n\t" \ "add %[va], %[va], :lo12:__cfaasm_" #label "_after" "\n\t" \ : [vb]"=r"(region.before), [va]"=r"(region.after) \ ); \ region; \ }); */ #endif #else #error unknown hardware architecture #endif // KERNEL ONLY // Check if a __cfactx_switch signal handler shoud defer // If true : preemption is safe // If false : preemption is unsafe and marked as pending static inline bool preemption_ready( void * ip ) { // Get all the region for which it is not safe to preempt __cfaasm_label( get ); __cfaasm_label( check ); __cfaasm_label( dsable ); __cfaasm_label( debug ); // Check if preemption is safe bool ready = true; if( __cfaasm_in( ip, get ) ) { ready = false; goto EXIT; }; if( __cfaasm_in( ip, check ) ) { ready = false; goto EXIT; }; if( __cfaasm_in( ip, dsable ) ) { ready = false; goto EXIT; }; if( __cfaasm_in( ip, debug ) ) { ready = false; goto EXIT; }; if( !__cfaabi_tls.preemption_state.enabled) { ready = false; goto EXIT; }; if( __cfaabi_tls.preemption_state.in_progress ) { ready = false; goto EXIT; }; EXIT: // Adjust the pending flag accordingly __cfaabi_tls.this_processor->pending_preemption = !ready; return ready; } //============================================================================================= // Kernel Signal Startup/Shutdown logic //============================================================================================= // Startup routine to activate preemption // Called from kernel_startup void __kernel_alarm_startup() { __cfaabi_dbg_print_safe( "Kernel : Starting preemption\n" ); // Start with preemption disabled until ready __cfaabi_tls.preemption_state.enabled = false; __cfaabi_tls.preemption_state.disable_count = 1; // Initialize the event kernel event_kernel = (event_kernel_t *)&storage_event_kernel; (*event_kernel){}; // Setup proper signal handlers __cfaabi_sigaction( SIGUSR1, sigHandler_ctxSwitch, SA_SIGINFO | SA_RESTART ); // __cfactx_switch handler __cfaabi_sigaction( SIGALRM, sigHandler_alarm , SA_SIGINFO | SA_RESTART ); // debug handler signal_block( SIGALRM ); alarm_stack = __create_pthread( &alarm_thread, alarm_loop, 0p ); } // Shutdown routine to deactivate preemption // Called from kernel_shutdown void __kernel_alarm_shutdown() { __cfaabi_dbg_print_safe( "Kernel : Preemption stopping\n" ); // Block all signals since we are already shutting down sigset_t mask; sigfillset( &mask ); sigprocmask( SIG_BLOCK, &mask, 0p ); // Notify the alarm thread of the shutdown sigval val = { 1 }; pthread_sigqueue( alarm_thread, SIGALRM, val ); // Wait for the preemption thread to finish pthread_join( alarm_thread, 0p ); free( alarm_stack ); // Preemption is now fully stopped __cfaabi_dbg_print_safe( "Kernel : Preemption stopped\n" ); } // Raii ctor/dtor for the preemption_scope // Used by thread to control when they want to receive preemption signals void ?{}( preemption_scope & this, processor * proc ) { (this.alarm){ proc, (Time){ 0 }, 0`s }; this.proc = proc; this.proc->preemption_alarm = &this.alarm; update_preemption( this.proc, this.proc->cltr->preemption_rate ); } void ^?{}( preemption_scope & this ) { disable_interrupts(); update_preemption( this.proc, 0`s ); } //============================================================================================= // Kernel Signal Handlers //============================================================================================= __cfaabi_dbg_debug_do( static thread_local void * last_interrupt = 0; ) // Context switch signal handler // Receives SIGUSR1 signal and causes the current thread to yield static void sigHandler_ctxSwitch( __CFA_SIGPARMS__ ) { void * ip = (void *)(cxt->uc_mcontext.CFA_REG_IP); __cfaabi_dbg_debug_do( last_interrupt = ip; ) // SKULLDUGGERY: if a thread creates a processor and the immediately deletes it, // the interrupt that is supposed to force the kernel thread to preempt might arrive // before the kernel thread has even started running. When that happens, an interrupt // with a null 'this_processor' will be caught, just ignore it. if(! __cfaabi_tls.this_processor ) return; choose(sfp->si_value.sival_int) { case PREEMPT_NORMAL : ;// Normal case, nothing to do here case PREEMPT_TERMINATE: verify( __atomic_load_n( &__cfaabi_tls.this_processor->do_terminate, __ATOMIC_SEQ_CST ) ); default: abort( "internal error, signal value is %d", sfp->si_value.sival_int ); } // Check if it is safe to preempt here if( !preemption_ready( ip ) ) { return; } __cfaabi_dbg_print_buffer_decl( " KERNEL: preempting core %p (%p @ %p).\n", __cfaabi_tls.this_processor, __cfaabi_tls.this_thread, (void *)(cxt->uc_mcontext.CFA_REG_IP) ); // Sync flag : prevent recursive calls to the signal handler __cfaabi_tls.preemption_state.in_progress = true; // Clear sighandler mask before context switching. #if GCC_VERSION > 50000 static_assert( sizeof( sigset_t ) == sizeof( cxt->uc_sigmask ), "Expected cxt->uc_sigmask to be of sigset_t" ); #endif if ( pthread_sigmask( SIG_SETMASK, (sigset_t *)&(cxt->uc_sigmask), 0p ) == -1 ) { abort( "internal error, sigprocmask" ); } // Clear the in progress flag __cfaabi_tls.preemption_state.in_progress = false; // Preemption can occur here force_yield( __ALARM_PREEMPTION ); // Do the actual __cfactx_switch } static void sigHandler_alarm( __CFA_SIGPARMS__ ) { abort("SIGALRM should never reach the signal handler"); } #if !defined(__CFA_NO_STATISTICS__) int __print_alarm_stats = 0; #endif // Main of the alarm thread // Waits on SIGALRM and send SIGUSR1 to whom ever needs it static void * alarm_loop( __attribute__((unused)) void * args ) { __processor_id_t id; id.full_proc = false; id.id = doregister(&id); __cfaabi_tls.this_proc_id = &id; #if !defined(__CFA_NO_STATISTICS__) struct __stats_t local_stats; __cfaabi_tls.this_stats = &local_stats; __init_stats( &local_stats ); #endif // Block sigalrms to control when they arrive sigset_t mask; sigfillset(&mask); if ( pthread_sigmask( SIG_BLOCK, &mask, 0p ) == -1 ) { abort( "internal error, pthread_sigmask" ); } sigemptyset( &mask ); sigaddset( &mask, SIGALRM ); // Main loop while( true ) { // Wait for a sigalrm siginfo_t info; int sig = sigwaitinfo( &mask, &info ); if( sig < 0 ) { //Error! int err = errno; switch( err ) { case EAGAIN : case EINTR : {__cfaabi_dbg_print_buffer_decl( " KERNEL: Spurious wakeup %d.\n", err );} continue; case EINVAL : abort( "Timeout was invalid." ); default: abort( "Unhandled error %d", err); } } // If another signal arrived something went wrong assertf(sig == SIGALRM, "Kernel Internal Error, sigwait: Unexpected signal %d (%d : %d)\n", sig, info.si_code, info.si_value.sival_int); // __cfaabi_dbg_print_safe( "Kernel : Caught alarm from %d with %d\n", info.si_code, info.si_value.sival_int ); // Switch on the code (a.k.a. the sender) to switch( info.si_code ) { // Timers can apparently be marked as sent for the kernel // In either case, tick preemption case SI_TIMER: case SI_KERNEL: // __cfaabi_dbg_print_safe( "Kernel : Preemption thread tick\n" ); lock( event_kernel->lock __cfaabi_dbg_ctx2 ); tick_preemption(); unlock( event_kernel->lock ); break; // Signal was not sent by the kernel but by an other thread case SI_QUEUE: // For now, other thread only signal the alarm thread to shut it down // If this needs to change use info.si_value and handle the case here goto EXIT; } } EXIT: __cfaabi_dbg_print_safe( "Kernel : Preemption thread stopping\n" ); unregister(&id); #if !defined(__CFA_NO_STATISTICS__) if( 0 != __print_alarm_stats ) { __print_stats( &local_stats, __print_alarm_stats, "Alarm", "Thread", 0p ); } #endif return 0p; } // Local Variables: // // mode: c // // tab-width: 4 // // End: //