Index: doc/theses/mubeen_zulfiqar_MMath/Makefile =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/Makefile (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ doc/theses/mubeen_zulfiqar_MMath/Makefile (revision 5f39135edcd5cb0479e079180b47998dcbb43839) @@ -1,5 +1,5 @@ ### Makefile from Andrew Beach's Masters Thesis -DOC=uw-ethesis.pdf +DOC=thesis.pdf BUILD=out TEXSRC=$(wildcard *.tex) @@ -19,5 +19,5 @@ ### Commands: LATEX=TEXINPUTS=${TEXLIB} pdflatex -halt-on-error -output-directory=${BUILD} -BIBTEX=BIBINPUTS=${BIBLIB} bibtex +#BIBTEX=BIBINPUTS=${BIBLIB} bibtex #GLOSSARY=INDEXSTYLE=${BUILD} makeglossaries-lite @@ -28,6 +28,6 @@ ${BUILD}/${DOC}: ${TEXSRC} ${BIBSRC} ${STYSRC} ${CLSSRC} Makefile | ${BUILD} ${LATEX} ${BASE} - ${BIBTEX} ${BUILD}/${BASE} - ${LATEX} ${BASE} +# ${BIBTEX} ${BUILD}/${BASE} +# ${LATEX} ${BASE} # ${GLOSSARY} ${BUILD}/${BASE} # ${LATEX} ${BASE} Index: doc/theses/mubeen_zulfiqar_MMath/allocator.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/allocator.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ (revision ) @@ -1,1 +1,0 @@ -\chapter{Allocator} Index: doc/theses/mubeen_zulfiqar_MMath/background.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/background.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ (revision ) @@ -1,3 +1,0 @@ -\chapter{Background} - -\cite{Wasik08} Index: doc/theses/mubeen_zulfiqar_MMath/benchmarks.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/benchmarks.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ (revision ) @@ -1,1 +1,0 @@ -\chapter{Benchmarks} Index: doc/theses/mubeen_zulfiqar_MMath/conclusion.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/conclusion.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ (revision ) @@ -1,1 +1,0 @@ -\chapter{Conclusion} Index: doc/theses/mubeen_zulfiqar_MMath/intro.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/intro.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ (revision ) @@ -1,1 +1,0 @@ -\chapter{Introduction} Index: doc/theses/mubeen_zulfiqar_MMath/uw-ethesis-frontpgs.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/uw-ethesis-frontpgs.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ (revision ) @@ -1,175 +1,0 @@ -% T I T L E P A G E -% ------------------- -% Last updated October 23, 2020, by Stephen Carr, IST-Client Services -% The title page is counted as page `i' but we need to suppress the -% page number. Also, we don't want any headers or footers. -\pagestyle{empty} -\pagenumbering{roman} - -% The contents of the title page are specified in the "titlepage" -% environment. -\begin{titlepage} - \begin{center} - \vspace*{1.0cm} - - {\Huge\bf \CFA Memory Allocation} - - \vspace*{1.0cm} - - by \\ - - \vspace*{1.0cm} - - {\Large Mubeen Zulfiqar} \\ - - \vspace*{3.0cm} - - A thesis \\ - presented to the University of Waterloo \\ - in fulfillment of the \\ - thesis requirement for the degree of \\ - Master of Mathematics \\ - in \\ - Computer Science \\ - - \vspace*{2.0cm} - - Waterloo, Ontario, Canada, \the\year \\ - - \vspace*{1.0cm} - - \copyright{} Mubeen Zulfiqar \the\year \\ - \end{center} -\end{titlepage} - -% The rest of the front pages should contain no headers and be numbered using -% Roman numerals starting with `ii'. -\pagestyle{plain} -\setcounter{page}{2} - -\cleardoublepage % Ends the current page and causes all figures and tables -% that have so far appeared in the input to be printed. In a two-sided -% printing style, it also makes the next page a right-hand (odd-numbered) -% page, producing a blank page if necessary. - -\begin{comment} -% E X A M I N I N G C O M M I T T E E (Required for Ph.D. theses only) -% Remove or comment out the lines below to remove this page -\begin{center}\textbf{Examining Committee Membership}\end{center} - \noindent -The following served on the Examining Committee for this thesis. -The decision of the Examining Committee is by majority vote. - \bigskip - - \noindent -\begin{tabbing} -Internal-External Member: \= \kill % using longest text to define tab length -External Examiner: \> Bruce Bruce \\ -\> Professor, Dept. of Philosophy of Zoology, University of Wallamaloo \\ -\end{tabbing} - \bigskip - - \noindent -\begin{tabbing} -Internal-External Member: \= \kill % using longest text to define tab length -Supervisor(s): \> Ann Elk \\ -\> Professor, Dept. of Zoology, University of Waterloo \\ -\> Andrea Anaconda \\ -\> Professor Emeritus, Dept. of Zoology, University of Waterloo \\ -\end{tabbing} - \bigskip - - \noindent - \begin{tabbing} -Internal-External Member: \= \kill % using longest text to define tab length -Internal Member: \> Pamela Python \\ -\> Professor, Dept. of Zoology, University of Waterloo \\ -\end{tabbing} - \bigskip - - \noindent -\begin{tabbing} -Internal-External Member: \= \kill % using longest text to define tab length -Internal-External Member: \> Meta Meta \\ -\> Professor, Dept. of Philosophy, University of Waterloo \\ -\end{tabbing} - \bigskip - - \noindent -\begin{tabbing} -Internal-External Member: \= \kill % using longest text to define tab length -Other Member(s): \> Leeping Fang \\ -\> Professor, Dept. of Fine Art, University of Waterloo \\ -\end{tabbing} - -\cleardoublepage -\end{comment} - -% D E C L A R A T I O N P A G E -% ------------------------------- - % The following is a sample Delaration Page as provided by the GSO - % December 13th, 2006. It is designed for an electronic thesis. - \begin{center}\textbf{Author's Declaration}\end{center} - - \noindent -I hereby declare that I am the sole author of this thesis. This is a true copy -of the thesis, including any required final revisions, as accepted by my -examiners. - - \bigskip - - \noindent -I understand that my thesis may be made electronically available to the public. - -\cleardoublepage - -% A B S T R A C T -% --------------- - -\begin{center}\textbf{Abstract}\end{center} - -This is the abstract. - -\cleardoublepage - -% A C K N O W L E D G E M E N T S -% ------------------------------- - -\begin{center}\textbf{Acknowledgements}\end{center} - -I would like to thank all the little people who made this thesis possible. -\cleardoublepage - -\begin{comment} -% D E D I C A T I O N -% ------------------- - -\begin{center}\textbf{Dedication}\end{center} - -This is dedicated to the one I love. -\cleardoublepage -\end{comment} - -% T A B L E O F C O N T E N T S -% --------------------------------- -\renewcommand\contentsname{Table of Contents} -\tableofcontents -\cleardoublepage -\phantomsection % allows hyperref to link to the correct page - -% L I S T O F F I G U R E S -% ----------------------------- -\addcontentsline{toc}{chapter}{List of Figures} -\listoffigures -\cleardoublepage -\phantomsection % allows hyperref to link to the correct page - -% L I S T O F T A B L E S -% --------------------------- -\addcontentsline{toc}{chapter}{List of Tables} -\listoftables -\cleardoublepage -\phantomsection % allows hyperref to link to the correct page - -% Change page numbering back to Arabic numerals -\pagenumbering{arabic} Index: doc/theses/mubeen_zulfiqar_MMath/uw-ethesis.bib =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/uw-ethesis.bib (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ (revision ) @@ -1,28 +1,0 @@ -% Bibliography of key references for "LaTeX for Thesis and Large Documents" -% For use with BibTeX - -@book{goossens.book, - author = "Michel Goossens and Frank Mittelbach and - Alexander Samarin", - title = "The \LaTeX\ Companion", - year = "1994", - publisher = "Addison-Wesley", - address = "Reading, Massachusetts" -} - -@book{knuth.book, - author = "Donald Knuth", - title = "The \TeX book", - year = "1986", - publisher = "Addison-Wesley", - address = "Reading, Massachusetts" -} - -@book{lamport.book, - author = "Leslie Lamport", - title = "\LaTeX\ --- A Document Preparation System", - edition = "Second", - year = "1994", - publisher = "Addison-Wesley", - address = "Reading, Massachusetts" -} Index: doc/theses/mubeen_zulfiqar_MMath/uw-ethesis.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/uw-ethesis.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ (revision ) @@ -1,245 +1,0 @@ -%====================================================================== -% University of Waterloo Thesis Template for LaTeX -% Last Updated November, 2020 -% by Stephen Carr, IST Client Services, -% University of Waterloo, 200 University Ave. W., Waterloo, Ontario, Canada -% FOR ASSISTANCE, please send mail to request@uwaterloo.ca - -% DISCLAIMER -% To the best of our knowledge, this template satisfies the current uWaterloo thesis requirements. -% However, it is your responsibility to assure that you have met all requirements of the University and your particular department. - -% Many thanks for the feedback from many graduates who assisted the development of this template. -% Also note that there are explanatory comments and tips throughout this template. -%====================================================================== -% Some important notes on using this template and making it your own... - -% The University of Waterloo has required electronic thesis submission since October 2006. -% See the uWaterloo thesis regulations at -% https://uwaterloo.ca/graduate-studies/thesis. -% This thesis template is geared towards generating a PDF version optimized for viewing on an electronic display, including hyperlinks within the PDF. - -% DON'T FORGET TO ADD YOUR OWN NAME AND TITLE in the "hyperref" package configuration below. -% THIS INFORMATION GETS EMBEDDED IN THE PDF FINAL PDF DOCUMENT. -% You can view the information if you view properties of the PDF document. - -% Many faculties/departments also require one or more printed copies. -% This template attempts to satisfy both types of output. -% See additional notes below. -% It is based on the standard "book" document class which provides all necessary sectioning structures and allows multi-part theses. - -% If you are using this template in Overleaf (cloud-based collaboration service), then it is automatically processed and previewed for you as you edit. - -% For people who prefer to install their own LaTeX distributions on their own computers, and process the source files manually, the following notes provide the sequence of tasks: - -% E.g. to process a thesis called "mythesis.tex" based on this template, run: - -% pdflatex mythesis -- first pass of the pdflatex processor -% bibtex mythesis -- generates bibliography from .bib data file(s) -% makeindex -- should be run only if an index is used -% pdflatex mythesis -- fixes numbering in cross-references, bibliographic references, glossaries, index, etc. -% pdflatex mythesis -- it takes a couple of passes to completely process all cross-references - -% If you use the recommended LaTeX editor, Texmaker, you would open the mythesis.tex file, then click the PDFLaTeX button. Then run BibTeX (under the Tools menu). -% Then click the PDFLaTeX button two more times. -% If you have an index as well,you'll need to run MakeIndex from the Tools menu as well, before running pdflatex -% the last two times. - -% N.B. The "pdftex" program allows graphics in the following formats to be included with the "\includegraphics" command: PNG, PDF, JPEG, TIFF -% Tip: Generate your figures and photos in the size you want them to appear in your thesis, rather than scaling them with \includegraphics options. -% Tip: Any drawings you do should be in scalable vector graphic formats: SVG, PNG, WMF, EPS and then converted to PNG or PDF, so they are scalable in the final PDF as well. -% Tip: Photographs should be cropped and compressed so as not to be too large. - -% To create a PDF output that is optimized for double-sided printing: -% 1) comment-out the \documentclass statement in the preamble below, and un-comment the second \documentclass line. -% 2) change the value assigned below to the boolean variable "PrintVersion" from " false" to "true". - -%====================================================================== -% D O C U M E N T P R E A M B L E -% Specify the document class, default style attributes, and page dimensions, etc. -% For hyperlinked PDF, suitable for viewing on a computer, use this: -\documentclass[letterpaper,12pt,titlepage,oneside,final]{book} - -% For PDF, suitable for double-sided printing, change the PrintVersion variable below to "true" and use this \documentclass line instead of the one above: -%\documentclass[letterpaper,12pt,titlepage,openright,twoside,final]{book} - -% Some LaTeX commands I define for my own nomenclature. -% If you have to, it's easier to make changes to nomenclature once here than in a million places throughout your thesis! -\newcommand{\package}[1]{\textbf{#1}} % package names in bold text -\newcommand{\cmmd}[1]{\textbackslash\texttt{#1}} % command name in tt font -\newcommand{\href}[1]{#1} % does nothing, but defines the command so the print-optimized version will ignore \href tags (redefined by hyperref pkg). -%\newcommand{\texorpdfstring}[2]{#1} % does nothing, but defines the command -% Anything defined here may be redefined by packages added below... - -% This package allows if-then-else control structures. -\usepackage{ifthen} -\newboolean{PrintVersion} -\setboolean{PrintVersion}{false} -% CHANGE THIS VALUE TO "true" as necessary, to improve printed results for hard copies by overriding some options of the hyperref package, called below. - -%\usepackage{nomencl} % For a nomenclature (optional; available from ctan.org) -\usepackage{amsmath,amssymb,amstext} % Lots of math symbols and environments -\usepackage{xcolor} -\usepackage[pdftex]{graphicx} -\usepackage{comment} % Removes large sections of the document. -\usepackage{todonotes} % Adds todos (Must be included after comment.) - -% Hyperlinks make it very easy to navigate an electronic document. -% In addition, this is where you should specify the thesis title and author as they appear in the properties of the PDF document. -% Use the "hyperref" package -% N.B. HYPERREF MUST BE THE LAST PACKAGE LOADED; ADD ADDITIONAL PKGS ABOVE -\usepackage[pdftex,pagebackref=true]{hyperref} % with basic options -%\usepackage[pdftex,pagebackref=true]{hyperref} -% N.B. pagebackref=true provides links back from the References to the body text. This can cause trouble for printing. -\hypersetup{ - plainpages=false, % needed if Roman numbers in frontpages - unicode=false, % non-Latin characters in Acrobat's bookmarks - pdftoolbar=true, % show Acrobat's toolbar? - pdfmenubar=true, % show Acrobat's menu? - pdffitwindow=false, % window fit to page when opened - pdfstartview={FitH}, % fits the width of the page to the window - pdftitle={Cforall Memory Allocation}, % title: CHANGE THIS TEXT! - pdfauthor={Mubeen Zulfiqar}, % author: CHANGE THIS TEXT! and uncomment this line - pdfsubject={Cforall}, % subject: CHANGE THIS TEXT! and uncomment this line - pdfkeywords={Cforall} {storage allocation} {C language}, % optional list of keywords - pdfnewwindow=true, % links in new window - colorlinks=true, % false: boxed links; true: colored links - linkcolor=blue, % color of internal links - citecolor=green, % color of links to bibliography - filecolor=magenta, % color of file links - urlcolor=cyan % color of external links -} -\ifthenelse{\boolean{PrintVersion}}{ % for improved print quality, change some hyperref options -\hypersetup{ % override some previously defined hyperref options - citecolor=black,% - filecolor=black,% - linkcolor=black,% - urlcolor=black -}}{} % end of ifthenelse (no else) - -%\usepackage[automake,toc,abbreviations]{glossaries-extra} % Exception to the rule of hyperref being the last add-on package -% If glossaries-extra is not in your LaTeX distribution, get it from CTAN (http://ctan.org/pkg/glossaries-extra), -% although it's supposed to be in both the TeX Live and MikTeX distributions. There are also documentation and -% installation instructions there. - -% Setting up the page margins... -\setlength{\textheight}{9in} -\setlength{\topmargin}{-0.45in} -\setlength{\headsep}{0.25in} -% uWaterloo thesis requirements specify a minimum of 1 inch (72pt) margin at the -% top, bottom, and outside page edges and a 1.125 in. (81pt) gutter margin (on binding side). -% While this is not an issue for electronic viewing, a PDF may be printed, and so we have the same page layout for both printed and electronic versions, we leave the gutter margin in. -% Set margins to minimum permitted by uWaterloo thesis regulations: -\setlength{\marginparwidth}{0pt} % width of margin notes -% N.B. If margin notes are used, you must adjust \textwidth, \marginparwidth -% and \marginparsep so that the space left between the margin notes and page -% edge is less than 15 mm (0.6 in.) -\setlength{\marginparsep}{0pt} % width of space between body text and margin notes -\setlength{\evensidemargin}{0.125in} % Adds 1/8 in. to binding side of all -% even-numbered pages when the "twoside" printing option is selected -\setlength{\oddsidemargin}{0.125in} % Adds 1/8 in. to the left of all pages when "oneside" printing is selected, and to the left of all odd-numbered pages when "twoside" printing is selected -\setlength{\textwidth}{6.375in} % assuming US letter paper (8.5 in. x 11 in.) and side margins as above -\raggedbottom - -% The following statement specifies the amount of space between paragraphs. Other reasonable specifications are \bigskipamount and \smallskipamount. -\setlength{\parskip}{\medskipamount} - -% The following statement controls the line spacing. -% The default spacing corresponds to good typographic conventions and only slight changes (e.g., perhaps "1.2"), if any, should be made. -\renewcommand{\baselinestretch}{1} % this is the default line space setting - -% By default, each chapter will start on a recto (right-hand side) page. -% We also force each section of the front pages to start on a recto page by inserting \cleardoublepage commands. -% In many cases, this will require that the verso (left-hand) page be blank, and while it should be counted, a page number should not be printed. -% The following statements ensure a page number is not printed on an otherwise blank verso page. -\let\origdoublepage\cleardoublepage -\newcommand{\clearemptydoublepage}{% - \clearpage{\pagestyle{empty}\origdoublepage}} -\let\cleardoublepage\clearemptydoublepage - -% Define Glossary terms (This is properly done here, in the preamble and -% could also be \input{} from a separate file...) -%\input{glossaries} -%\makeglossaries - -% cfa macros used in the document -\input{common} -\CFAStyle % CFA code-style for all languages -\lstset{language=CFA,basicstyle=\linespread{0.9}\tt} % CFA default language - -%====================================================================== -% L O G I C A L D O C U M E N T -% The logical document contains the main content of your thesis. -% Being a large document, it is a good idea to divide your thesis into several files, each one containing one chapter or other significant chunk of content, so you can easily shuffle things around later if desired. -%====================================================================== -\begin{document} - -%---------------------------------------------------------------------- -% FRONT MATERIAL -% title page,declaration, borrowers' page, abstract, acknowledgements, -% dedication, table of contents, list of tables, list of figures, nomenclature, etc. -%---------------------------------------------------------------------- -\input{uw-ethesis-frontpgs} - -%---------------------------------------------------------------------- -% MAIN BODY -% We suggest using a separate file for each chapter of your thesis. -% Start each chapter file with the \chapter command. -% Only use \documentclass or \begin{document} and \end{document} commands in this master document. -% Tip: Putting each sentence on a new line is a way to simplify later editing. -%---------------------------------------------------------------------- -\input{intro} -\input{background} -\input{allocator} -\input{benchmarks} -\input{conclusion} - -%---------------------------------------------------------------------- -% END MATERIAL -% Bibliography, Appendices, Index, etc. -%---------------------------------------------------------------------- - -% Bibliography - -% The following statement selects the style to use for references. -% It controls the sort order of the entries in the bibliography and also the formatting for the in-text labels. -\bibliographystyle{plain} -% This specifies the location of the file containing the bibliographic information. -% It assumes you're using BibTeX to manage your references (if not, why not?). -\cleardoublepage % This is needed if the "book" document class is used, to place the anchor in the correct page, because the bibliography will start on its own page. -% Use \clearpage instead if the document class uses the "oneside" argument -\phantomsection % With hyperref package, enables hyperlinking from the table of contents to bibliography -% The following statement causes the title "References" to be used for the bibliography section: -\renewcommand*{\bibname}{References} - -% Add the References to the Table of Contents -\addcontentsline{toc}{chapter}{\textbf{References}} - -\bibliography{uw-ethesis,pl} -% Tip: You can create multiple .bib files to organize your references. -% Just list them all in the \bibliogaphy command, separated by commas (no spaces). - -% The following statement causes the specified references to be added to the bibliography even if they were not cited in the text. -% The asterisk is a wildcard that causes all entries in the bibliographic database to be included (optional). -% \nocite{*} -%---------------------------------------------------------------------- - -% Appendices - -% The \appendix statement indicates the beginning of the appendices. -\appendix -% Add an un-numbered title page before the appendices and a line in the Table of Contents -% \chapter*{APPENDICES} -% \addcontentsline{toc}{chapter}{APPENDICES} -% Appendices are just more chapters, with different labeling (letters instead of numbers). -% \input{appendix-matlab_plots.tex} - -% GLOSSARIES (Lists of definitions, abbreviations, symbols, etc. -% provided by the glossaries-extra package) -% ----------------------------- -%\printglossaries -%\cleardoublepage -%\phantomsection % allows hyperref to link to the correct page - -%---------------------------------------------------------------------- -\end{document} % end of logical document