Index: doc/theses/mubeen_zulfiqar_MMath/Makefile =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/Makefile (revision ab5498ec169672083f4e8bcaacb08d9f12fde8a1) +++ doc/theses/mubeen_zulfiqar_MMath/Makefile (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) @@ -1,5 +1,5 @@ ### Makefile from Andrew Beach's Masters Thesis -DOC=thesis.pdf +DOC=uw-ethesis.pdf BUILD=out TEXSRC=$(wildcard *.tex) @@ -19,5 +19,5 @@ ### Commands: LATEX=TEXINPUTS=${TEXLIB} pdflatex -halt-on-error -output-directory=${BUILD} -#BIBTEX=BIBINPUTS=${BIBLIB} bibtex +BIBTEX=BIBINPUTS=${BIBLIB} bibtex #GLOSSARY=INDEXSTYLE=${BUILD} makeglossaries-lite @@ -28,6 +28,6 @@ ${BUILD}/${DOC}: ${TEXSRC} ${BIBSRC} ${STYSRC} ${CLSSRC} Makefile | ${BUILD} ${LATEX} ${BASE} -# ${BIBTEX} ${BUILD}/${BASE} -# ${LATEX} ${BASE} + ${BIBTEX} ${BUILD}/${BASE} + ${LATEX} ${BASE} # ${GLOSSARY} ${BUILD}/${BASE} # ${LATEX} ${BASE} Index: doc/theses/mubeen_zulfiqar_MMath/allocator.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/allocator.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ doc/theses/mubeen_zulfiqar_MMath/allocator.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) @@ -0,0 +1,1 @@ +\chapter{Allocator} Index: doc/theses/mubeen_zulfiqar_MMath/background.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/background.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ doc/theses/mubeen_zulfiqar_MMath/background.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) @@ -0,0 +1,3 @@ +\chapter{Background} + +\cite{Wasik08} Index: doc/theses/mubeen_zulfiqar_MMath/benchmarks.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/benchmarks.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ doc/theses/mubeen_zulfiqar_MMath/benchmarks.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) @@ -0,0 +1,1 @@ +\chapter{Benchmarks} Index: doc/theses/mubeen_zulfiqar_MMath/conclusion.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/conclusion.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ doc/theses/mubeen_zulfiqar_MMath/conclusion.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) @@ -0,0 +1,1 @@ +\chapter{Conclusion} Index: doc/theses/mubeen_zulfiqar_MMath/intro.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/intro.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ doc/theses/mubeen_zulfiqar_MMath/intro.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) @@ -0,0 +1,1 @@ +\chapter{Introduction} Index: doc/theses/mubeen_zulfiqar_MMath/uw-ethesis-frontpgs.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/uw-ethesis-frontpgs.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ doc/theses/mubeen_zulfiqar_MMath/uw-ethesis-frontpgs.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) @@ -0,0 +1,175 @@ +% T I T L E P A G E +% ------------------- +% Last updated October 23, 2020, by Stephen Carr, IST-Client Services +% The title page is counted as page `i' but we need to suppress the +% page number. Also, we don't want any headers or footers. +\pagestyle{empty} +\pagenumbering{roman} + +% The contents of the title page are specified in the "titlepage" +% environment. +\begin{titlepage} + \begin{center} + \vspace*{1.0cm} + + {\Huge\bf \CFA Memory Allocation} + + \vspace*{1.0cm} + + by \\ + + \vspace*{1.0cm} + + {\Large Mubeen Zulfiqar} \\ + + \vspace*{3.0cm} + + A thesis \\ + presented to the University of Waterloo \\ + in fulfillment of the \\ + thesis requirement for the degree of \\ + Master of Mathematics \\ + in \\ + Computer Science \\ + + \vspace*{2.0cm} + + Waterloo, Ontario, Canada, \the\year \\ + + \vspace*{1.0cm} + + \copyright{} Mubeen Zulfiqar \the\year \\ + \end{center} +\end{titlepage} + +% The rest of the front pages should contain no headers and be numbered using +% Roman numerals starting with `ii'. +\pagestyle{plain} +\setcounter{page}{2} + +\cleardoublepage % Ends the current page and causes all figures and tables +% that have so far appeared in the input to be printed. In a two-sided +% printing style, it also makes the next page a right-hand (odd-numbered) +% page, producing a blank page if necessary. + +\begin{comment} +% E X A M I N I N G C O M M I T T E E (Required for Ph.D. theses only) +% Remove or comment out the lines below to remove this page +\begin{center}\textbf{Examining Committee Membership}\end{center} + \noindent +The following served on the Examining Committee for this thesis. +The decision of the Examining Committee is by majority vote. + \bigskip + + \noindent +\begin{tabbing} +Internal-External Member: \= \kill % using longest text to define tab length +External Examiner: \> Bruce Bruce \\ +\> Professor, Dept. of Philosophy of Zoology, University of Wallamaloo \\ +\end{tabbing} + \bigskip + + \noindent +\begin{tabbing} +Internal-External Member: \= \kill % using longest text to define tab length +Supervisor(s): \> Ann Elk \\ +\> Professor, Dept. of Zoology, University of Waterloo \\ +\> Andrea Anaconda \\ +\> Professor Emeritus, Dept. of Zoology, University of Waterloo \\ +\end{tabbing} + \bigskip + + \noindent + \begin{tabbing} +Internal-External Member: \= \kill % using longest text to define tab length +Internal Member: \> Pamela Python \\ +\> Professor, Dept. of Zoology, University of Waterloo \\ +\end{tabbing} + \bigskip + + \noindent +\begin{tabbing} +Internal-External Member: \= \kill % using longest text to define tab length +Internal-External Member: \> Meta Meta \\ +\> Professor, Dept. of Philosophy, University of Waterloo \\ +\end{tabbing} + \bigskip + + \noindent +\begin{tabbing} +Internal-External Member: \= \kill % using longest text to define tab length +Other Member(s): \> Leeping Fang \\ +\> Professor, Dept. of Fine Art, University of Waterloo \\ +\end{tabbing} + +\cleardoublepage +\end{comment} + +% D E C L A R A T I O N P A G E +% ------------------------------- + % The following is a sample Delaration Page as provided by the GSO + % December 13th, 2006. It is designed for an electronic thesis. + \begin{center}\textbf{Author's Declaration}\end{center} + + \noindent +I hereby declare that I am the sole author of this thesis. This is a true copy +of the thesis, including any required final revisions, as accepted by my +examiners. + + \bigskip + + \noindent +I understand that my thesis may be made electronically available to the public. + +\cleardoublepage + +% A B S T R A C T +% --------------- + +\begin{center}\textbf{Abstract}\end{center} + +This is the abstract. + +\cleardoublepage + +% A C K N O W L E D G E M E N T S +% ------------------------------- + +\begin{center}\textbf{Acknowledgements}\end{center} + +I would like to thank all the little people who made this thesis possible. +\cleardoublepage + +\begin{comment} +% D E D I C A T I O N +% ------------------- + +\begin{center}\textbf{Dedication}\end{center} + +This is dedicated to the one I love. +\cleardoublepage +\end{comment} + +% T A B L E O F C O N T E N T S +% --------------------------------- +\renewcommand\contentsname{Table of Contents} +\tableofcontents +\cleardoublepage +\phantomsection % allows hyperref to link to the correct page + +% L I S T O F F I G U R E S +% ----------------------------- +\addcontentsline{toc}{chapter}{List of Figures} +\listoffigures +\cleardoublepage +\phantomsection % allows hyperref to link to the correct page + +% L I S T O F T A B L E S +% --------------------------- +\addcontentsline{toc}{chapter}{List of Tables} +\listoftables +\cleardoublepage +\phantomsection % allows hyperref to link to the correct page + +% Change page numbering back to Arabic numerals +\pagenumbering{arabic} Index: doc/theses/mubeen_zulfiqar_MMath/uw-ethesis.bib =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/uw-ethesis.bib (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ doc/theses/mubeen_zulfiqar_MMath/uw-ethesis.bib (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) @@ -0,0 +1,28 @@ +% Bibliography of key references for "LaTeX for Thesis and Large Documents" +% For use with BibTeX + +@book{goossens.book, + author = "Michel Goossens and Frank Mittelbach and + Alexander Samarin", + title = "The \LaTeX\ Companion", + year = "1994", + publisher = "Addison-Wesley", + address = "Reading, Massachusetts" +} + +@book{knuth.book, + author = "Donald Knuth", + title = "The \TeX book", + year = "1986", + publisher = "Addison-Wesley", + address = "Reading, Massachusetts" +} + +@book{lamport.book, + author = "Leslie Lamport", + title = "\LaTeX\ --- A Document Preparation System", + edition = "Second", + year = "1994", + publisher = "Addison-Wesley", + address = "Reading, Massachusetts" +} Index: doc/theses/mubeen_zulfiqar_MMath/uw-ethesis.tex =================================================================== --- doc/theses/mubeen_zulfiqar_MMath/uw-ethesis.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) +++ doc/theses/mubeen_zulfiqar_MMath/uw-ethesis.tex (revision 50d8d4da20d6d81e73415309c28285f6edb2209f) @@ -0,0 +1,245 @@ +%====================================================================== +% University of Waterloo Thesis Template for LaTeX +% Last Updated November, 2020 +% by Stephen Carr, IST Client Services, +% University of Waterloo, 200 University Ave. W., Waterloo, Ontario, Canada +% FOR ASSISTANCE, please send mail to request@uwaterloo.ca + +% DISCLAIMER +% To the best of our knowledge, this template satisfies the current uWaterloo thesis requirements. +% However, it is your responsibility to assure that you have met all requirements of the University and your particular department. + +% Many thanks for the feedback from many graduates who assisted the development of this template. +% Also note that there are explanatory comments and tips throughout this template. +%====================================================================== +% Some important notes on using this template and making it your own... + +% The University of Waterloo has required electronic thesis submission since October 2006. +% See the uWaterloo thesis regulations at +% https://uwaterloo.ca/graduate-studies/thesis. +% This thesis template is geared towards generating a PDF version optimized for viewing on an electronic display, including hyperlinks within the PDF. + +% DON'T FORGET TO ADD YOUR OWN NAME AND TITLE in the "hyperref" package configuration below. +% THIS INFORMATION GETS EMBEDDED IN THE PDF FINAL PDF DOCUMENT. +% You can view the information if you view properties of the PDF document. + +% Many faculties/departments also require one or more printed copies. +% This template attempts to satisfy both types of output. +% See additional notes below. +% It is based on the standard "book" document class which provides all necessary sectioning structures and allows multi-part theses. + +% If you are using this template in Overleaf (cloud-based collaboration service), then it is automatically processed and previewed for you as you edit. + +% For people who prefer to install their own LaTeX distributions on their own computers, and process the source files manually, the following notes provide the sequence of tasks: + +% E.g. to process a thesis called "mythesis.tex" based on this template, run: + +% pdflatex mythesis -- first pass of the pdflatex processor +% bibtex mythesis -- generates bibliography from .bib data file(s) +% makeindex -- should be run only if an index is used +% pdflatex mythesis -- fixes numbering in cross-references, bibliographic references, glossaries, index, etc. +% pdflatex mythesis -- it takes a couple of passes to completely process all cross-references + +% If you use the recommended LaTeX editor, Texmaker, you would open the mythesis.tex file, then click the PDFLaTeX button. Then run BibTeX (under the Tools menu). +% Then click the PDFLaTeX button two more times. +% If you have an index as well,you'll need to run MakeIndex from the Tools menu as well, before running pdflatex +% the last two times. + +% N.B. The "pdftex" program allows graphics in the following formats to be included with the "\includegraphics" command: PNG, PDF, JPEG, TIFF +% Tip: Generate your figures and photos in the size you want them to appear in your thesis, rather than scaling them with \includegraphics options. +% Tip: Any drawings you do should be in scalable vector graphic formats: SVG, PNG, WMF, EPS and then converted to PNG or PDF, so they are scalable in the final PDF as well. +% Tip: Photographs should be cropped and compressed so as not to be too large. + +% To create a PDF output that is optimized for double-sided printing: +% 1) comment-out the \documentclass statement in the preamble below, and un-comment the second \documentclass line. +% 2) change the value assigned below to the boolean variable "PrintVersion" from " false" to "true". + +%====================================================================== +% D O C U M E N T P R E A M B L E +% Specify the document class, default style attributes, and page dimensions, etc. +% For hyperlinked PDF, suitable for viewing on a computer, use this: +\documentclass[letterpaper,12pt,titlepage,oneside,final]{book} + +% For PDF, suitable for double-sided printing, change the PrintVersion variable below to "true" and use this \documentclass line instead of the one above: +%\documentclass[letterpaper,12pt,titlepage,openright,twoside,final]{book} + +% Some LaTeX commands I define for my own nomenclature. +% If you have to, it's easier to make changes to nomenclature once here than in a million places throughout your thesis! +\newcommand{\package}[1]{\textbf{#1}} % package names in bold text +\newcommand{\cmmd}[1]{\textbackslash\texttt{#1}} % command name in tt font +\newcommand{\href}[1]{#1} % does nothing, but defines the command so the print-optimized version will ignore \href tags (redefined by hyperref pkg). +%\newcommand{\texorpdfstring}[2]{#1} % does nothing, but defines the command +% Anything defined here may be redefined by packages added below... + +% This package allows if-then-else control structures. +\usepackage{ifthen} +\newboolean{PrintVersion} +\setboolean{PrintVersion}{false} +% CHANGE THIS VALUE TO "true" as necessary, to improve printed results for hard copies by overriding some options of the hyperref package, called below. + +%\usepackage{nomencl} % For a nomenclature (optional; available from ctan.org) +\usepackage{amsmath,amssymb,amstext} % Lots of math symbols and environments +\usepackage{xcolor} +\usepackage[pdftex]{graphicx} +\usepackage{comment} % Removes large sections of the document. +\usepackage{todonotes} % Adds todos (Must be included after comment.) + +% Hyperlinks make it very easy to navigate an electronic document. +% In addition, this is where you should specify the thesis title and author as they appear in the properties of the PDF document. +% Use the "hyperref" package +% N.B. HYPERREF MUST BE THE LAST PACKAGE LOADED; ADD ADDITIONAL PKGS ABOVE +\usepackage[pdftex,pagebackref=true]{hyperref} % with basic options +%\usepackage[pdftex,pagebackref=true]{hyperref} +% N.B. pagebackref=true provides links back from the References to the body text. This can cause trouble for printing. +\hypersetup{ + plainpages=false, % needed if Roman numbers in frontpages + unicode=false, % non-Latin characters in Acrobat's bookmarks + pdftoolbar=true, % show Acrobat's toolbar? + pdfmenubar=true, % show Acrobat's menu? + pdffitwindow=false, % window fit to page when opened + pdfstartview={FitH}, % fits the width of the page to the window + pdftitle={Cforall Memory Allocation}, % title: CHANGE THIS TEXT! + pdfauthor={Mubeen Zulfiqar}, % author: CHANGE THIS TEXT! and uncomment this line + pdfsubject={Cforall}, % subject: CHANGE THIS TEXT! and uncomment this line + pdfkeywords={Cforall} {storage allocation} {C language}, % optional list of keywords + pdfnewwindow=true, % links in new window + colorlinks=true, % false: boxed links; true: colored links + linkcolor=blue, % color of internal links + citecolor=green, % color of links to bibliography + filecolor=magenta, % color of file links + urlcolor=cyan % color of external links +} +\ifthenelse{\boolean{PrintVersion}}{ % for improved print quality, change some hyperref options +\hypersetup{ % override some previously defined hyperref options + citecolor=black,% + filecolor=black,% + linkcolor=black,% + urlcolor=black +}}{} % end of ifthenelse (no else) + +%\usepackage[automake,toc,abbreviations]{glossaries-extra} % Exception to the rule of hyperref being the last add-on package +% If glossaries-extra is not in your LaTeX distribution, get it from CTAN (http://ctan.org/pkg/glossaries-extra), +% although it's supposed to be in both the TeX Live and MikTeX distributions. There are also documentation and +% installation instructions there. + +% Setting up the page margins... +\setlength{\textheight}{9in} +\setlength{\topmargin}{-0.45in} +\setlength{\headsep}{0.25in} +% uWaterloo thesis requirements specify a minimum of 1 inch (72pt) margin at the +% top, bottom, and outside page edges and a 1.125 in. (81pt) gutter margin (on binding side). +% While this is not an issue for electronic viewing, a PDF may be printed, and so we have the same page layout for both printed and electronic versions, we leave the gutter margin in. +% Set margins to minimum permitted by uWaterloo thesis regulations: +\setlength{\marginparwidth}{0pt} % width of margin notes +% N.B. If margin notes are used, you must adjust \textwidth, \marginparwidth +% and \marginparsep so that the space left between the margin notes and page +% edge is less than 15 mm (0.6 in.) +\setlength{\marginparsep}{0pt} % width of space between body text and margin notes +\setlength{\evensidemargin}{0.125in} % Adds 1/8 in. to binding side of all +% even-numbered pages when the "twoside" printing option is selected +\setlength{\oddsidemargin}{0.125in} % Adds 1/8 in. to the left of all pages when "oneside" printing is selected, and to the left of all odd-numbered pages when "twoside" printing is selected +\setlength{\textwidth}{6.375in} % assuming US letter paper (8.5 in. x 11 in.) and side margins as above +\raggedbottom + +% The following statement specifies the amount of space between paragraphs. Other reasonable specifications are \bigskipamount and \smallskipamount. +\setlength{\parskip}{\medskipamount} + +% The following statement controls the line spacing. +% The default spacing corresponds to good typographic conventions and only slight changes (e.g., perhaps "1.2"), if any, should be made. +\renewcommand{\baselinestretch}{1} % this is the default line space setting + +% By default, each chapter will start on a recto (right-hand side) page. +% We also force each section of the front pages to start on a recto page by inserting \cleardoublepage commands. +% In many cases, this will require that the verso (left-hand) page be blank, and while it should be counted, a page number should not be printed. +% The following statements ensure a page number is not printed on an otherwise blank verso page. +\let\origdoublepage\cleardoublepage +\newcommand{\clearemptydoublepage}{% + \clearpage{\pagestyle{empty}\origdoublepage}} +\let\cleardoublepage\clearemptydoublepage + +% Define Glossary terms (This is properly done here, in the preamble and +% could also be \input{} from a separate file...) +%\input{glossaries} +%\makeglossaries + +% cfa macros used in the document +\input{common} +\CFAStyle % CFA code-style for all languages +\lstset{language=CFA,basicstyle=\linespread{0.9}\tt} % CFA default language + +%====================================================================== +% L O G I C A L D O C U M E N T +% The logical document contains the main content of your thesis. +% Being a large document, it is a good idea to divide your thesis into several files, each one containing one chapter or other significant chunk of content, so you can easily shuffle things around later if desired. +%====================================================================== +\begin{document} + +%---------------------------------------------------------------------- +% FRONT MATERIAL +% title page,declaration, borrowers' page, abstract, acknowledgements, +% dedication, table of contents, list of tables, list of figures, nomenclature, etc. +%---------------------------------------------------------------------- +\input{uw-ethesis-frontpgs} + +%---------------------------------------------------------------------- +% MAIN BODY +% We suggest using a separate file for each chapter of your thesis. +% Start each chapter file with the \chapter command. +% Only use \documentclass or \begin{document} and \end{document} commands in this master document. +% Tip: Putting each sentence on a new line is a way to simplify later editing. +%---------------------------------------------------------------------- +\input{intro} +\input{background} +\input{allocator} +\input{benchmarks} +\input{conclusion} + +%---------------------------------------------------------------------- +% END MATERIAL +% Bibliography, Appendices, Index, etc. +%---------------------------------------------------------------------- + +% Bibliography + +% The following statement selects the style to use for references. +% It controls the sort order of the entries in the bibliography and also the formatting for the in-text labels. +\bibliographystyle{plain} +% This specifies the location of the file containing the bibliographic information. +% It assumes you're using BibTeX to manage your references (if not, why not?). +\cleardoublepage % This is needed if the "book" document class is used, to place the anchor in the correct page, because the bibliography will start on its own page. +% Use \clearpage instead if the document class uses the "oneside" argument +\phantomsection % With hyperref package, enables hyperlinking from the table of contents to bibliography +% The following statement causes the title "References" to be used for the bibliography section: +\renewcommand*{\bibname}{References} + +% Add the References to the Table of Contents +\addcontentsline{toc}{chapter}{\textbf{References}} + +\bibliography{uw-ethesis,pl} +% Tip: You can create multiple .bib files to organize your references. +% Just list them all in the \bibliogaphy command, separated by commas (no spaces). + +% The following statement causes the specified references to be added to the bibliography even if they were not cited in the text. +% The asterisk is a wildcard that causes all entries in the bibliographic database to be included (optional). +% \nocite{*} +%---------------------------------------------------------------------- + +% Appendices + +% The \appendix statement indicates the beginning of the appendices. +\appendix +% Add an un-numbered title page before the appendices and a line in the Table of Contents +% \chapter*{APPENDICES} +% \addcontentsline{toc}{chapter}{APPENDICES} +% Appendices are just more chapters, with different labeling (letters instead of numbers). +% \input{appendix-matlab_plots.tex} + +% GLOSSARIES (Lists of definitions, abbreviations, symbols, etc. +% provided by the glossaries-extra package) +% ----------------------------- +%\printglossaries +%\cleardoublepage +%\phantomsection % allows hyperref to link to the correct page + +%---------------------------------------------------------------------- +\end{document} % end of logical document