source: src/Parser/parser.yy @ b199e54

ADTaaron-thesisarm-ehast-experimentalcleanup-dtorsdeferred_resndemanglerenumforall-pointer-decayjacob/cs343-translationjenkins-sandboxnew-astnew-ast-unique-exprno_listpersistent-indexerpthread-emulationqualifiedEnum
Last change on this file since b199e54 was 203c667, checked in by Peter A. Buhr <pabuhr@…>, 6 years ago

clean up

  • Property mode set to 100644
File size: 124.5 KB
Line 
1//
2// Cforall Version 1.0.0 Copyright (C) 2015 University of Waterloo
3//
4// The contents of this file are covered under the licence agreement in the
5// file "LICENCE" distributed with Cforall.
6//
7// parser.yy --
8//
9// Author           : Peter A. Buhr
10// Created On       : Sat Sep  1 20:22:55 2001
11// Last Modified By : Peter A. Buhr
12// Last Modified On : Sun Jun 24 10:41:10 2018
13// Update Count     : 3587
14//
15
16// This grammar is based on the ANSI99/11 C grammar, specifically parts of EXPRESSION and STATEMENTS, and on the C
17// grammar by James A. Roskind, specifically parts of DECLARATIONS and EXTERNAL DEFINITIONS.  While parts have been
18// copied, important changes have been made in all sections; these changes are sufficient to constitute a new grammar.
19// In particular, this grammar attempts to be more syntactically precise, i.e., it parses less incorrect language syntax
20// that must be subsequently rejected by semantic checks.  Nevertheless, there are still several semantic checks
21// required and many are noted in the grammar. Finally, the grammar is extended with GCC and CFA language extensions.
22
23// Acknowledgments to Richard Bilson, Glen Ditchfield, and Rodolfo Gabriel Esteves who all helped when I got stuck with
24// the grammar.
25
26// The root language for this grammar is ANSI99/11 C. All of ANSI99/11 is parsed, except for:
27//
28// 1. designation with '=' (use ':' instead)
29//
30// Most of the syntactic extensions from ANSI90 to ANSI11 C are marked with the comment "C99/C11". This grammar also has
31// two levels of extensions. The first extensions cover most of the GCC C extensions, except for:
32//
33// 1. designation with and without '=' (use ':' instead)
34// 2. attributes not allowed in parenthesis of declarator
35//
36// All of the syntactic extensions for GCC C are marked with the comment "GCC". The second extensions are for Cforall
37// (CFA), which fixes several of C's outstanding problems and extends C with many modern language concepts. All of the
38// syntactic extensions for CFA C are marked with the comment "CFA". As noted above, there is one unreconcileable
39// parsing problem between C99 and CFA with respect to designators; this is discussed in detail before the "designation"
40// grammar rule.
41
42%{
43#define YYDEBUG_LEXER_TEXT (yylval)                                             // lexer loads this up each time
44#define YYDEBUG 1                                                                               // get the pretty debugging code to compile
45#define YYERROR_VERBOSE                                                                 // more information in syntax errors
46
47#undef __GNUC_MINOR__
48
49#include <cstdio>
50#include <stack>
51using namespace std;
52
53#include "ParseNode.h"
54#include "TypedefTable.h"
55#include "TypeData.h"
56#include "LinkageSpec.h"
57#include "Common/SemanticError.h"                                               // error_str
58#include "Common/utility.h"                                                             // for maybeMoveBuild, maybeBuild, CodeLo...
59
60extern DeclarationNode * parseTree;
61extern LinkageSpec::Spec linkage;
62extern TypedefTable typedefTable;
63
64stack< LinkageSpec::Spec > linkageStack;
65
66bool appendStr( string & to, string & from ) {
67        // 1. Multiple strings are concatenated into a single string but not combined internally. The reason is that
68        //    "\x12" "3" is treated as 2 characters versus 1 because "escape sequences are converted into single members of
69        //    the execution character set just prior to adjacent string literal concatenation" (C11, Section 6.4.5-8). It is
70        //    easier to let the C compiler handle this case.
71        //
72        // 2. String encodings are transformed into canonical form (one encoding at start) so the encoding can be found
73        //    without searching the string, e.g.: "abc" L"def" L"ghi" => L"abc" "def" "ghi". Multiple encodings must match,
74        //    i.e., u"a" U"b" L"c" is disallowed.
75
76        if ( from[0] != '"' ) {                                                         // encoding ?
77                if ( to[0] != '"' ) {                                                   // encoding ?
78                        if ( to[0] != from[0] || to[1] != from[1] ) { // different encodings ?
79                                yyerror( "non-matching string encodings for string-literal concatenation" );
80                                return false;                                                   // parse error, must call YYERROR in action
81                        } else if ( from[1] == '8' ) {
82                                from.erase( 0, 1 );                                             // remove 2nd encoding
83                        } // if
84                } else {
85                        if ( from[1] == '8' ) {                                         // move encoding to start
86                                to = "u8" + to;
87                                from.erase( 0, 1 );                                             // remove 2nd encoding
88                        } else {
89                                to = from[0] + to;
90                        } // if
91                } // if
92                from.erase( 0, 1 );                                                             // remove 2nd encoding
93        } // if
94        to += " " + from;                                                                       // concatenated into single string
95        return true;
96} // appendStr
97
98DeclarationNode * distAttr( DeclarationNode * specifier, DeclarationNode * declList ) {
99        // distribute declaration_specifier across all declared variables, e.g., static, const, __attribute__.
100        DeclarationNode * cur = declList, * cl = (new DeclarationNode)->addType( specifier );
101        //cur->addType( specifier );
102        for ( cur = dynamic_cast< DeclarationNode * >( cur->get_next() ); cur != nullptr; cur = dynamic_cast< DeclarationNode * >( cur->get_next() ) ) {
103                cl->cloneBaseType( cur );
104        } // for
105        declList->addType( cl );
106//      delete cl;
107        return declList;
108} // distAttr
109
110void distExt( DeclarationNode * declaration ) {
111        // distribute EXTENSION across all declarations
112        for ( DeclarationNode *iter = declaration; iter != nullptr; iter = (DeclarationNode *)iter->get_next() ) {
113                iter->set_extension( true );
114        } // for
115} // distExt
116
117// There is an ambiguity for inline generic-routine return-types and generic routines.
118//   forall( otype T ) struct S { int i; } bar( T ) {}
119// Does the forall bind to the struct or the routine, and how would it be possible to explicitly specify the binding.
120//   forall( otype T ) struct S { int T; } forall( otype W ) bar( W ) {}
121// Currently, the forall is associated with the routine, and the generic type has to be separately defined:
122//   forall( otype T ) struct S { int T; };
123//   forall( otype W ) bar( W ) {}
124
125void rebindForall( DeclarationNode * declSpec, DeclarationNode * funcDecl ) {
126        if ( declSpec->type->kind == TypeData::Aggregate ) { // ignore aggregate definition
127                funcDecl->type->forall = declSpec->type->aggregate.params; // move forall from aggregate to function type
128                declSpec->type->aggregate.params = nullptr;
129        } // if
130} // rebindForall
131
132NameExpr * build_postfix_name( const string * name ) {
133        NameExpr * new_name = build_varref( new string( "?`" + *name ) );
134        delete name;
135        return new_name;
136} // build_postfix_name
137
138bool forall = false, xxx = false, yyy = false;                  // aggregate have one or more forall qualifiers ?
139
140// https://www.gnu.org/software/bison/manual/bison.html#Location-Type
141#define YYLLOC_DEFAULT(Cur, Rhs, N)                                                                                             \
142if ( N ) {                                                                                                                                              \
143        (Cur).first_line   = YYRHSLOC( Rhs, 1 ).first_line;                                                     \
144        (Cur).first_column = YYRHSLOC( Rhs, 1 ).first_column;                                           \
145        (Cur).last_line    = YYRHSLOC( Rhs, N ).last_line;                                                      \
146        (Cur).last_column  = YYRHSLOC( Rhs, N ).last_column;                                            \
147        (Cur).filename     = YYRHSLOC( Rhs, 1 ).filename;                                                       \
148} else {                                                                                                                                                \
149        (Cur).first_line   = (Cur).last_line = YYRHSLOC( Rhs, 0 ).last_line;            \
150        (Cur).first_column = (Cur).last_column = YYRHSLOC( Rhs, 0 ).last_column;        \
151        (Cur).filename     = YYRHSLOC( Rhs, 0 ).filename;                                                       \
152}
153%}
154
155%define parse.error verbose
156
157// Types declaration for productions
158%union
159{
160        Token tok;
161        ParseNode * pn;
162        ExpressionNode * en;
163        DeclarationNode * decl;
164        DeclarationNode::Aggregate aggKey;
165        DeclarationNode::TypeClass tclass;
166        StatementNode * sn;
167        WaitForStmt * wfs;
168        Expression * constant;
169        IfCtl * ifctl;
170        ForCtl * fctl;
171        LabelNode * label;
172        InitializerNode * in;
173        OperKinds op;
174        std::string * str;
175        bool flag;
176        CatchStmt::Kind catch_kind;
177        GenericExpr * genexpr;
178}
179
180//************************* TERMINAL TOKENS ********************************
181
182// keywords
183%token TYPEDEF
184%token EXTERN STATIC AUTO REGISTER
185%token THREADLOCAL                                                                              // C11
186%token INLINE FORTRAN                                                                   // C99, extension ISO/IEC 9899:1999 Section J.5.9(1)
187%token NORETURN                                                                                 // C11
188%token CONST VOLATILE
189%token RESTRICT                                                                                 // C99
190%token ATOMIC                                                                                   // C11
191%token FORALL MUTEX VIRTUAL                                                             // CFA
192%token VOID CHAR SHORT INT LONG FLOAT DOUBLE SIGNED UNSIGNED
193%token BOOL COMPLEX IMAGINARY                                                   // C99
194%token INT128 FLOAT80 FLOAT128                                                  // GCC
195%token ZERO_T ONE_T                                                                             // CFA
196%token VALIST                                                                                   // GCC
197%token TYPEOF LABEL                                                                             // GCC
198%token ENUM STRUCT UNION
199%token EXCEPTION                                                                                // CFA
200%token COROUTINE MONITOR THREAD                                                 // CFA
201%token OTYPE FTYPE DTYPE TTYPE TRAIT                                    // CFA
202%token SIZEOF OFFSETOF
203%token ATTRIBUTE EXTENSION                                                              // GCC
204%token IF ELSE SWITCH CASE DEFAULT DO WHILE FOR BREAK CONTINUE GOTO RETURN
205%token CHOOSE DISABLE ENABLE FALLTHRU FALLTHROUGH TRY CATCH CATCHRESUME FINALLY THROW THROWRESUME AT WITH WHEN WAITFOR // CFA
206%token ASM                                                                                              // C99, extension ISO/IEC 9899:1999 Section J.5.10(1)
207%token ALIGNAS ALIGNOF GENERIC STATICASSERT                             // C11
208
209// names and constants: lexer differentiates between identifier and typedef names
210%token<tok> IDENTIFIER                  QUOTED_IDENTIFIER               TYPEDEFname                             TYPEGENname
211%token<tok> TIMEOUT                             WOR
212%token<tok> ATTR_IDENTIFIER             ATTR_TYPEDEFname                ATTR_TYPEGENname
213%token<tok> INTEGERconstant             CHARACTERconstant               STRINGliteral
214%token<tok> DIRECTIVE
215// Floating point constant is broken into three kinds of tokens because of the ambiguity with tuple indexing and
216// overloading constants 0/1, e.g., x.1 is lexed as (x)(.1), where (.1) is a factional constant, but is semantically
217// converted into the tuple index (.)(1). e.g., 3.x
218%token<tok>     FLOATING_DECIMALconstant        FLOATING_FRACTIONconstant       FLOATINGconstant
219
220// multi-character operators
221%token ARROW                                                                                    // ->
222%token ICR DECR                                                                                 // ++   --
223%token LS RS                                                                                    // <<   >>
224%token LE GE EQ NE                                                                              // <=   >=      ==      !=
225%token ANDAND OROR                                                                              // &&   ||
226%token ELLIPSIS                                                                                 // ...
227
228%token EXPassign        MULTassign      DIVassign       MODassign       // \=   *=      /=      %=
229%token PLUSassign       MINUSassign                                                     // +=   -=
230%token LSassign         RSassign                                                        // <<=  >>=
231%token ANDassign        ERassign        ORassign                                // &=   ^=      |=
232
233%token ATassign                                                                                 // @=
234
235%type<tok> identifier  no_attr_identifier
236%type<tok> identifier_or_type_name  no_attr_identifier_or_type_name  attr_name
237%type<tok> quasi_keyword
238%type<constant> string_literal
239%type<str> string_literal_list
240
241// expressions
242%type<en> constant
243%type<en> tuple                                                 tuple_expression_list
244%type<op> ptrref_operator                               unary_operator                          assignment_operator
245%type<en> primary_expression                    postfix_expression                      unary_expression
246%type<en> cast_expression                               exponential_expression          multiplicative_expression       additive_expression
247%type<en> shift_expression                              relational_expression           equality_expression
248%type<en> AND_expression                                exclusive_OR_expression         inclusive_OR_expression
249%type<en> logical_AND_expression                logical_OR_expression
250%type<en> conditional_expression                constant_expression                     assignment_expression           assignment_expression_opt
251%type<en> comma_expression                              comma_expression_opt
252%type<en> argument_expression_list              argument_expression                     default_initialize_opt
253%type<ifctl> if_control_expression
254%type<fctl> for_control_expression
255%type<en> subrange
256%type<decl> asm_name_opt
257%type<en> asm_operands_opt asm_operands_list asm_operand
258%type<label> label_list
259%type<en> asm_clobbers_list_opt
260%type<flag> asm_volatile_opt
261%type<en> handler_predicate_opt
262%type<genexpr> generic_association generic_assoc_list
263
264// statements
265%type<sn> statement                                             labeled_statement                       compound_statement
266%type<sn> statement_decl                                statement_decl_list                     statement_list_nodecl
267%type<sn> selection_statement                   if_statement
268%type<sn> switch_clause_list_opt                switch_clause_list
269%type<en> case_value
270%type<sn> case_clause                                   case_value_list                         case_label                                      case_label_list
271%type<sn> iteration_statement                   jump_statement
272%type<sn> expression_statement                  asm_statement
273%type<sn> with_statement
274%type<en> with_clause_opt
275%type<sn> exception_statement                   handler_clause                          finally_clause
276%type<catch_kind> handler_key
277%type<sn> mutex_statement
278%type<en> when_clause                                   when_clause_opt                         waitfor                                         timeout
279%type<sn> waitfor_statement
280%type<wfs> waitfor_clause
281
282// declarations
283%type<decl> abstract_declarator abstract_ptr abstract_array abstract_function array_dimension multi_array_dimension
284%type<decl> abstract_parameter_declarator abstract_parameter_ptr abstract_parameter_array abstract_parameter_function array_parameter_dimension array_parameter_1st_dimension
285%type<decl> abstract_parameter_declaration
286
287%type<aggKey> aggregate_key
288%type<decl> aggregate_type aggregate_type_nobody
289
290%type<decl> assertion assertion_list assertion_list_opt
291
292%type<en>   bit_subrange_size_opt bit_subrange_size
293
294%type<decl> basic_declaration_specifier basic_type_name basic_type_specifier direct_type indirect_type
295
296%type<decl> trait_declaration trait_declaration_list trait_declaring_list trait_specifier
297
298%type<decl> declaration declaration_list declaration_list_opt declaration_qualifier_list
299%type<decl> declaration_specifier declaration_specifier_nobody declarator declaring_list
300
301%type<decl> elaborated_type elaborated_type_nobody
302
303%type<decl> enumerator_list enum_type enum_type_nobody
304%type<en> enumerator_value_opt
305
306%type<decl> external_definition external_definition_list external_definition_list_opt
307
308%type<decl> exception_declaration
309
310%type<decl> field_declaration field_declaration_list_opt field_declarator_opt field_declaring_list
311%type<en> field field_list field_name fraction_constants_opt
312
313%type<decl> external_function_definition function_definition function_array function_declarator function_no_ptr function_ptr
314
315%type<decl> identifier_parameter_declarator identifier_parameter_ptr identifier_parameter_array identifier_parameter_function
316%type<decl> identifier_list
317
318%type<decl> cfa_abstract_array cfa_abstract_declarator_no_tuple cfa_abstract_declarator_tuple
319%type<decl> cfa_abstract_function cfa_abstract_parameter_declaration cfa_abstract_parameter_list
320%type<decl> cfa_abstract_ptr cfa_abstract_tuple
321
322%type<decl> cfa_array_parameter_1st_dimension
323
324%type<decl> cfa_trait_declaring_list cfa_declaration cfa_field_declaring_list
325%type<decl> cfa_function_declaration cfa_function_return cfa_function_specifier
326
327%type<decl> cfa_identifier_parameter_array cfa_identifier_parameter_declarator_no_tuple
328%type<decl> cfa_identifier_parameter_declarator_tuple cfa_identifier_parameter_ptr
329
330%type<decl> cfa_parameter_declaration cfa_parameter_list cfa_parameter_ellipsis_list_opt
331
332%type<decl> cfa_typedef_declaration cfa_variable_declaration cfa_variable_specifier
333
334%type<decl> c_declaration static_assert
335%type<decl> KR_function_declarator KR_function_no_ptr KR_function_ptr KR_function_array
336%type<decl> KR_parameter_list KR_parameter_list_opt
337
338%type<decl> parameter_declaration parameter_list parameter_type_list_opt
339
340%type<decl> paren_identifier paren_type
341
342%type<decl> storage_class storage_class_list
343
344%type<decl> sue_declaration_specifier sue_declaration_specifier_nobody sue_type_specifier sue_type_specifier_nobody
345
346%type<tclass> type_class
347%type<decl> type_declarator type_declarator_name type_declaring_list
348
349%type<decl> type_declaration_specifier type_type_specifier type_name typegen_name
350%type<decl> typedef typedef_declaration typedef_expression
351
352%type<decl> variable_type_redeclarator type_ptr type_array type_function
353
354%type<decl> type_parameter_redeclarator type_parameter_ptr type_parameter_array type_parameter_function
355
356%type<decl> type type_no_function
357%type<decl> type_parameter type_parameter_list type_initializer_opt
358
359%type<en> type_list
360
361%type<decl> type_qualifier type_qualifier_name forall type_qualifier_list_opt type_qualifier_list
362%type<decl> type_specifier type_specifier_nobody
363
364%type<decl> variable_declarator variable_ptr variable_array variable_function
365%type<decl> variable_abstract_declarator variable_abstract_ptr variable_abstract_array variable_abstract_function
366
367%type<decl> attribute_list_opt attribute_list attribute_name_list attribute attribute_name
368
369// initializers
370%type<in>  initializer initializer_list_opt initializer_opt
371
372// designators
373%type<en>  designator designator_list designation
374
375
376// Handle shift/reduce conflict for dangling else by shifting the ELSE token. For example, this string is ambiguous:
377//   .---------.                                matches IF '(' comma_expression ')' statement . (reduce)
378//   if ( C ) S1 else S2
379//   `-----------------'                matches IF '(' comma_expression ')' statement . (shift) ELSE statement */
380// Similar issues exit with the waitfor statement.
381
382// Order of these lines matters (low-to-high precedence). THEN is left associative over WOR/TIMEOUT/ELSE, WOR is left
383// associative over TIMEOUT/ELSE, and TIMEOUT is left associative over ELSE.
384%precedence THEN        // rule precedence for IF/WAITFOR statement
385%precedence WOR         // token precedence for start of WOR in WAITFOR statement
386%precedence TIMEOUT     // token precedence for start of TIMEOUT in WAITFOR statement
387%precedence ELSE        // token precedence for start of else clause in IF/WAITFOR statement
388
389// Handle shift/reduce conflict for generic type by shifting the '(' token. For example, this string is ambiguous:
390//   forall( otype T ) struct Foo { T v; };
391//       .-----.                                matches pointer to function returning a generic (which is impossible without a type)
392//   Foo ( *fp )( int );
393//   `---'                                              matches start of TYPEGENname '('
394// Must be:
395//   Foo( int ) ( *fp )( int );
396
397// Order of these lines matters (low-to-high precedence).
398%precedence TYPEGENname
399%precedence '('
400
401%locations                                                                                              // support location tracking for error messages
402
403%start translation_unit                                                                 // parse-tree root
404
405%%
406//************************* Namespace Management ********************************
407
408// The C grammar is not context free because it relies on the distinct terminal symbols "identifier" and "TYPEDEFname",
409// which are lexically identical.
410//
411//   typedef int foo; // identifier foo must now be scanned as TYPEDEFname
412//   foo f;           // to allow it to appear in this context
413//
414// While it may be possible to write a purely context-free grammar, such a grammar would obscure the relationship
415// between syntactic and semantic constructs.  Cforall compounds this problem by introducing type names local to the
416// scope of a declaration (for instance, those introduced through "forall" qualifiers), and by introducing "type
417// generators" -- parameterized types.  This latter type name creates a third class of identifiers, "TYPEGENname", which
418// must be distinguished by the lexical scanner.
419//
420// Since the scanner cannot distinguish among the different classes of identifiers without some context information,
421// there is a type table (typedefTable), which holds type names and identifiers that override type names, for each named
422// scope. During parsing, semantic actions update the type table by adding new identifiers in the current scope. For
423// each context that introduces a name scope, a new level is created in the type table and that level is popped on
424// exiting the scope.  Since type names can be local to a particular declaration, each declaration is itself a scope.
425// This requires distinguishing between type names that are local to the current declaration scope and those that
426// persist past the end of the declaration (i.e., names defined in "typedef" or "otype" declarations).
427//
428// The non-terminals "push" and "pop" denote the opening and closing of named scopes. Every push has a matching pop in
429// the production rule. There are multiple lists of declarations, where each declaration is a named scope, so pop/push
430// around the list separator.
431//
432//  int f( forall(T) T (*f1) T , forall( S ) S (*f2)( S ) );
433//      push               pop   push                   pop
434
435push:
436                { typedefTable.enterScope(); }
437        ;
438
439pop:
440                { typedefTable.leaveScope(); }
441        ;
442
443//************************* CONSTANTS ********************************
444
445constant:
446                // ENUMERATIONconstant is not included here; it is treated as a variable with type "enumeration constant".
447        INTEGERconstant                                                         { $$ = new ExpressionNode( build_constantInteger( *$1 ) ); }
448        | FLOATING_DECIMALconstant                                      { $$ = new ExpressionNode( build_constantFloat( *$1 ) ); }
449        | FLOATING_FRACTIONconstant                                     { $$ = new ExpressionNode( build_constantFloat( *$1 ) ); }
450        | FLOATINGconstant                                                      { $$ = new ExpressionNode( build_constantFloat( *$1 ) ); }
451        | CHARACTERconstant                                                     { $$ = new ExpressionNode( build_constantChar( *$1 ) ); }
452        ;
453
454quasi_keyword:                                                                                  // CFA
455        TIMEOUT
456        | WOR
457        ;
458
459identifier:
460        IDENTIFIER
461        | ATTR_IDENTIFIER                                                                       // CFA
462        | quasi_keyword
463        ;
464
465no_attr_identifier:
466        IDENTIFIER
467        | quasi_keyword
468        ;
469
470string_literal:
471        string_literal_list                                                     { $$ = build_constantStr( *$1 ); }
472        ;
473
474string_literal_list:                                                                    // juxtaposed strings are concatenated
475        STRINGliteral                                                           { $$ = $1; } // conversion from tok to str
476        | string_literal_list STRINGliteral
477                {
478                        if ( ! appendStr( *$1, *$2 ) ) YYERROR;         // append 2nd juxtaposed string to 1st
479                        delete $2;                                                                      // allocated by lexer
480                        $$ = $1;                                                                        // conversion from tok to str
481                }
482        ;
483
484//************************* EXPRESSIONS ********************************
485
486primary_expression:
487        IDENTIFIER                                                                                      // typedef name cannot be used as a variable name
488                { $$ = new ExpressionNode( build_varref( $1 ) ); }
489        | quasi_keyword
490                { $$ = new ExpressionNode( build_varref( $1 ) ); }
491        | tuple
492        | '(' comma_expression ')'
493                { $$ = $2; }
494        | '(' compound_statement ')'                                            // GCC, lambda expression
495                { $$ = new ExpressionNode( new StmtExpr( dynamic_cast< CompoundStmt * >(maybeMoveBuild< Statement >($2) ) ) ); }
496        | constant '`' IDENTIFIER                                                       // CFA, postfix call
497                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), $1 ) ); }
498        | string_literal '`' IDENTIFIER                                         // CFA, postfix call
499                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), new ExpressionNode( $1 ) ) ); }
500        | IDENTIFIER '`' IDENTIFIER                                                     // CFA, postfix call
501                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), new ExpressionNode( build_varref( $1 ) ) ) ); }
502        | tuple '`' IDENTIFIER                                                          // CFA, postfix call
503                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $3 ) ), $1 ) ); }
504        | '(' comma_expression ')' '`' IDENTIFIER                       // CFA, postfix call
505                { $$ = new ExpressionNode( build_func( new ExpressionNode( build_postfix_name( $5 ) ), $2 ) ); }
506        | type_name '.' no_attr_identifier                                      // CFA, nested type
507                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
508        | type_name '.' '[' field_list ']'                                      // CFA, nested type / tuple field selector
509                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
510        | GENERIC '(' assignment_expression ',' generic_assoc_list ')' // C11
511                {
512                        // add the missing control expression to the GenericExpr and return it
513                        $5->control = maybeMoveBuild<Expression>( $3 );
514                        $$ = new ExpressionNode( $5 );
515                }
516        ;
517
518generic_assoc_list:                                                                             // C11
519        generic_association
520        | generic_assoc_list ',' generic_association
521                {
522                        // steal the association node from the singleton and delete the wrapper
523                        $1->associations.splice($1->associations.end(), $3->associations);
524                        delete $3;
525                        $$ = $1;
526                }
527        ;
528
529generic_association:                                                                    // C11
530        type_no_function ':' assignment_expression
531                {
532                        // create a GenericExpr wrapper with one association pair
533                        $$ = new GenericExpr( nullptr, { { maybeMoveBuildType($1), maybeMoveBuild<Expression>($3) } } );
534                }
535        | DEFAULT ':' assignment_expression
536                { $$ = new GenericExpr( nullptr, { { maybeMoveBuild<Expression>($3) } } ); }
537        ;
538
539postfix_expression:
540        primary_expression
541        | postfix_expression '[' assignment_expression ']'
542                // CFA, comma_expression disallowed in this context because it results in a common user error: subscripting a
543                // matrix with x[i,j] instead of x[i][j]. While this change is not backwards compatible, there seems to be
544                // little advantage to this feature and many disadvantages. It is possible to write x[(i,j)] in CFA, which is
545                // equivalent to the old x[i,j].
546                { $$ = new ExpressionNode( build_binary_val( OperKinds::Index, $1, $3 ) ); }
547        | postfix_expression '{' argument_expression_list '}' // CFA, constructor call
548                {
549                        Token fn;
550                        fn.str = new std::string( "?{}" );                      // location undefined - use location of '{'?
551                        $$ = new ExpressionNode( new ConstructorExpr( build_func( new ExpressionNode( build_varref( fn ) ), (ExpressionNode *)( $1 )->set_last( $3 ) ) ) );
552                }
553        | postfix_expression '(' argument_expression_list ')'
554                { $$ = new ExpressionNode( build_func( $1, $3 ) ); }
555        | postfix_expression '.' no_attr_identifier
556                { $$ = new ExpressionNode( build_fieldSel( $1, build_varref( $3 ) ) ); }
557        | postfix_expression '.' INTEGERconstant                        // CFA, tuple index
558                { $$ = new ExpressionNode( build_fieldSel( $1, build_constantInteger( *$3 ) ) ); }
559        | postfix_expression FLOATING_FRACTIONconstant          // CFA, tuple index
560                { $$ = new ExpressionNode( build_fieldSel( $1, build_field_name_FLOATING_FRACTIONconstant( *$2 ) ) ); }
561        | postfix_expression '.' '[' field_list ']'                     // CFA, tuple field selector
562                { $$ = new ExpressionNode( build_fieldSel( $1, build_tuple( $4 ) ) ); }
563        | postfix_expression ARROW no_attr_identifier
564                {
565                        $$ = new ExpressionNode( build_pfieldSel( $1, *$3 == "0" || *$3 == "1" ? build_constantInteger( *$3 ) : build_varref( $3 ) ) );
566                }
567        | postfix_expression ARROW INTEGERconstant                      // CFA, tuple index
568                { $$ = new ExpressionNode( build_pfieldSel( $1, build_constantInteger( *$3 ) ) ); }
569        | postfix_expression ARROW '[' field_list ']'           // CFA, tuple field selector
570                { $$ = new ExpressionNode( build_pfieldSel( $1, build_tuple( $4 ) ) ); }
571        | postfix_expression ICR
572                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::IncrPost, $1 ) ); }
573        | postfix_expression DECR
574                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::DecrPost, $1 ) ); }
575        | '(' type_no_function ')' '{' initializer_list_opt comma_opt '}' // C99, compound-literal
576                { $$ = new ExpressionNode( build_compoundLiteral( $2, new InitializerNode( $5, true ) ) ); }
577        | '(' type_no_function ')' '@' '{' initializer_list_opt comma_opt '}' // CFA, explicit C compound-literal
578                { $$ = new ExpressionNode( build_compoundLiteral( $2, (new InitializerNode( $6, true ))->set_maybeConstructed( false ) ) ); }
579        | '^' primary_expression '{' argument_expression_list '}' // CFA
580                {
581                        Token fn;
582                        fn.str = new string( "^?{}" );                          // location undefined
583                        $$ = new ExpressionNode( build_func( new ExpressionNode( build_varref( fn ) ), (ExpressionNode *)( $2 )->set_last( $4 ) ) );
584                }
585        ;
586
587argument_expression_list:
588        argument_expression
589        | argument_expression_list ',' argument_expression
590                { $$ = (ExpressionNode *)( $1->set_last( $3 )); }
591        ;
592
593argument_expression:
594        // empty
595                { $$ = nullptr; }
596        // | '@'                                                                                                // use default argument
597        //      { $$ = new ExpressionNode( build_constantInteger( *new string( "2" ) ) ); }
598        | assignment_expression
599        ;
600
601field_list:                                                                                             // CFA, tuple field selector
602        field
603        | field_list ',' field                                          { $$ = (ExpressionNode *)$1->set_last( $3 ); }
604        ;
605
606field:                                                                                                  // CFA, tuple field selector
607        field_name
608        | FLOATING_DECIMALconstant field
609                { $$ = new ExpressionNode( build_fieldSel( new ExpressionNode( build_field_name_FLOATING_DECIMALconstant( *$1 ) ), maybeMoveBuild<Expression>( $2 ) ) ); }
610        | FLOATING_DECIMALconstant '[' field_list ']'
611                { $$ = new ExpressionNode( build_fieldSel( new ExpressionNode( build_field_name_FLOATING_DECIMALconstant( *$1 ) ), build_tuple( $3 ) ) ); }
612        | field_name '.' field
613                { $$ = new ExpressionNode( build_fieldSel( $1, maybeMoveBuild<Expression>( $3 ) ) ); }
614        | field_name '.' '[' field_list ']'
615                { $$ = new ExpressionNode( build_fieldSel( $1, build_tuple( $4 ) ) ); }
616        | field_name ARROW field
617                { $$ = new ExpressionNode( build_pfieldSel( $1, maybeMoveBuild<Expression>( $3 ) ) ); }
618        | field_name ARROW '[' field_list ']'
619                { $$ = new ExpressionNode( build_pfieldSel( $1, build_tuple( $4 ) ) ); }
620        ;
621
622field_name:
623        INTEGERconstant fraction_constants_opt
624                { $$ = new ExpressionNode( build_field_name_fraction_constants( build_constantInteger( *$1 ), $2 ) ); }
625        | FLOATINGconstant fraction_constants_opt
626                { $$ = new ExpressionNode( build_field_name_fraction_constants( build_field_name_FLOATINGconstant( *$1 ), $2 ) ); }
627        | no_attr_identifier fraction_constants_opt
628                {
629                        $$ = new ExpressionNode( build_field_name_fraction_constants( build_varref( $1 ), $2 ) );
630                }
631        ;
632
633fraction_constants_opt:
634        // empty
635                { $$ = nullptr; }
636        | fraction_constants_opt FLOATING_FRACTIONconstant
637                {
638                        Expression * constant = build_field_name_FLOATING_FRACTIONconstant( *$2 );
639                        $$ = $1 != nullptr ? new ExpressionNode( build_fieldSel( $1,  constant ) ) : new ExpressionNode( constant );
640                }
641        ;
642
643unary_expression:
644        postfix_expression
645                // first location where constant/string can have operator applied: sizeof 3/sizeof "abc" still requires
646                // semantics checks, e.g., ++3, 3--, *3, &&3
647        | constant
648        | string_literal
649                { $$ = new ExpressionNode( $1 ); }
650        | EXTENSION cast_expression                                                     // GCC
651                { $$ = $2->set_extension( true ); }
652                // '*' ('&') is separated from unary_operator because of shift/reduce conflict in:
653                //              { * X; }         // dereference X
654                //              { * int X; } // CFA declaration of pointer to int
655        | ptrref_operator cast_expression                                       // CFA
656                {
657                        switch ( $1 ) {
658                          case OperKinds::AddressOf:
659                                $$ = new ExpressionNode( new AddressExpr( maybeMoveBuild< Expression >( $2 ) ) );
660                                break;
661                          case OperKinds::PointTo:
662                                $$ = new ExpressionNode( build_unary_val( $1, $2 ) );
663                                break;
664                          case OperKinds::And:
665                                $$ = new ExpressionNode( new AddressExpr( new AddressExpr( maybeMoveBuild< Expression >( $2 ) ) ) );
666                                break;
667                          default:
668                                assert( false );
669                        }
670                }
671        | unary_operator cast_expression
672                { $$ = new ExpressionNode( build_unary_val( $1, $2 ) ); }
673        | ICR unary_expression
674                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::Incr, $2 ) ); }
675        | DECR unary_expression
676                { $$ = new ExpressionNode( build_unary_ptr( OperKinds::Decr, $2 ) ); }
677        | SIZEOF unary_expression
678                { $$ = new ExpressionNode( new SizeofExpr( maybeMoveBuild< Expression >( $2 ) ) ); }
679        | SIZEOF '(' type_no_function ')'
680                { $$ = new ExpressionNode( new SizeofExpr( maybeMoveBuildType( $3 ) ) ); }
681        | ALIGNOF unary_expression                                                      // GCC, variable alignment
682                { $$ = new ExpressionNode( new AlignofExpr( maybeMoveBuild< Expression >( $2 ) ) ); }
683        | ALIGNOF '(' type_no_function ')'                                      // GCC, type alignment
684                { $$ = new ExpressionNode( new AlignofExpr( maybeMoveBuildType( $3 ) ) ); }
685        | OFFSETOF '(' type_no_function ',' no_attr_identifier ')'
686                { $$ = new ExpressionNode( build_offsetOf( $3, build_varref( $5 ) ) ); }
687        | ATTR_IDENTIFIER
688                { $$ = new ExpressionNode( new AttrExpr( build_varref( $1 ), maybeMoveBuild< Expression >( (ExpressionNode *)nullptr ) ) ); }
689        | ATTR_IDENTIFIER '(' argument_expression ')'
690                { $$ = new ExpressionNode( new AttrExpr( build_varref( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
691        | ATTR_IDENTIFIER '(' type ')'
692                { $$ = new ExpressionNode( new AttrExpr( build_varref( $1 ), maybeMoveBuildType( $3 ) ) ); }
693        ;
694
695ptrref_operator:
696        '*'                                                                                     { $$ = OperKinds::PointTo; }
697        | '&'                                                                           { $$ = OperKinds::AddressOf; }
698                // GCC, address of label must be handled by semantic check for ref,ref,label
699        | ANDAND                                                                        { $$ = OperKinds::And; }
700        ;
701
702unary_operator:
703        '+'                                                                                     { $$ = OperKinds::UnPlus; }
704        | '-'                                                                           { $$ = OperKinds::UnMinus; }
705        | '!'                                                                           { $$ = OperKinds::Neg; }
706        | '~'                                                                           { $$ = OperKinds::BitNeg; }
707        ;
708
709cast_expression:
710        unary_expression
711        | '(' type_no_function ')' cast_expression
712                { $$ = new ExpressionNode( build_cast( $2, $4 ) ); }
713        | '(' COROUTINE '&' ')' cast_expression                         // CFA
714                { $$ = new ExpressionNode( build_keyword_cast( KeywordCastExpr::Coroutine, $5 ) ); }
715        | '(' THREAD '&' ')' cast_expression                            // CFA
716                { $$ = new ExpressionNode( build_keyword_cast( KeywordCastExpr::Thread, $5 ) ); }
717        | '(' MONITOR '&' ')' cast_expression                           // CFA
718                { $$ = new ExpressionNode( build_keyword_cast( KeywordCastExpr::Monitor, $5 ) ); }
719                // VIRTUAL cannot be opt because of look ahead issues
720        | '(' VIRTUAL ')' cast_expression                                       // CFA
721                { $$ = new ExpressionNode( new VirtualCastExpr( maybeMoveBuild< Expression >( $4 ), maybeMoveBuildType( nullptr ) ) ); }
722        | '(' VIRTUAL type_no_function ')' cast_expression      // CFA
723                { $$ = new ExpressionNode( new VirtualCastExpr( maybeMoveBuild< Expression >( $5 ), maybeMoveBuildType( $3 ) ) ); }
724//      | '(' type_no_function ')' tuple
725//              { $$ = new ExpressionNode( build_cast( $2, $4 ) ); }
726        ;
727
728exponential_expression:
729        cast_expression
730        | exponential_expression '\\' cast_expression
731                { $$ = new ExpressionNode( build_binary_val( OperKinds::Exp, $1, $3 ) ); }
732        ;
733
734multiplicative_expression:
735        exponential_expression
736        | multiplicative_expression '*' exponential_expression
737                { $$ = new ExpressionNode( build_binary_val( OperKinds::Mul, $1, $3 ) ); }
738        | multiplicative_expression '/' exponential_expression
739                { $$ = new ExpressionNode( build_binary_val( OperKinds::Div, $1, $3 ) ); }
740        | multiplicative_expression '%' exponential_expression
741                { $$ = new ExpressionNode( build_binary_val( OperKinds::Mod, $1, $3 ) ); }
742        ;
743
744additive_expression:
745        multiplicative_expression
746        | additive_expression '+' multiplicative_expression
747                { $$ = new ExpressionNode( build_binary_val( OperKinds::Plus, $1, $3 ) ); }
748        | additive_expression '-' multiplicative_expression
749                { $$ = new ExpressionNode( build_binary_val( OperKinds::Minus, $1, $3 ) ); }
750        ;
751
752shift_expression:
753        additive_expression
754        | shift_expression LS additive_expression
755                { $$ = new ExpressionNode( build_binary_val( OperKinds::LShift, $1, $3 ) ); }
756        | shift_expression RS additive_expression
757                { $$ = new ExpressionNode( build_binary_val( OperKinds::RShift, $1, $3 ) ); }
758        ;
759
760relational_expression:
761        shift_expression
762        | relational_expression '<' shift_expression
763                { $$ = new ExpressionNode( build_binary_val( OperKinds::LThan, $1, $3 ) ); }
764        | relational_expression '>' shift_expression
765                { $$ = new ExpressionNode( build_binary_val( OperKinds::GThan, $1, $3 ) ); }
766        | relational_expression LE shift_expression
767                { $$ = new ExpressionNode( build_binary_val( OperKinds::LEThan, $1, $3 ) ); }
768        | relational_expression GE shift_expression
769                { $$ = new ExpressionNode( build_binary_val( OperKinds::GEThan, $1, $3 ) ); }
770        ;
771
772equality_expression:
773        relational_expression
774        | equality_expression EQ relational_expression
775                { $$ = new ExpressionNode( build_binary_val( OperKinds::Eq, $1, $3 ) ); }
776        | equality_expression NE relational_expression
777                { $$ = new ExpressionNode( build_binary_val( OperKinds::Neq, $1, $3 ) ); }
778        ;
779
780AND_expression:
781        equality_expression
782        | AND_expression '&' equality_expression
783                { $$ = new ExpressionNode( build_binary_val( OperKinds::BitAnd, $1, $3 ) ); }
784        ;
785
786exclusive_OR_expression:
787        AND_expression
788        | exclusive_OR_expression '^' AND_expression
789                { $$ = new ExpressionNode( build_binary_val( OperKinds::Xor, $1, $3 ) ); }
790        ;
791
792inclusive_OR_expression:
793        exclusive_OR_expression
794        | inclusive_OR_expression '|' exclusive_OR_expression
795                { $$ = new ExpressionNode( build_binary_val( OperKinds::BitOr, $1, $3 ) ); }
796        ;
797
798logical_AND_expression:
799        inclusive_OR_expression
800        | logical_AND_expression ANDAND inclusive_OR_expression
801                { $$ = new ExpressionNode( build_and_or( $1, $3, true ) ); }
802        ;
803
804logical_OR_expression:
805        logical_AND_expression
806        | logical_OR_expression OROR logical_AND_expression
807                { $$ = new ExpressionNode( build_and_or( $1, $3, false ) ); }
808        ;
809
810conditional_expression:
811        logical_OR_expression
812        | logical_OR_expression '?' comma_expression ':' conditional_expression
813                { $$ = new ExpressionNode( build_cond( $1, $3, $5 ) ); }
814                // FIX ME: computes $1 twice
815        | logical_OR_expression '?' /* empty */ ':' conditional_expression // GCC, omitted first operand
816                { $$ = new ExpressionNode( build_cond( $1, $1, $4 ) ); }
817        ;
818
819constant_expression:
820        conditional_expression
821        ;
822
823assignment_expression:
824                // CFA, assignment is separated from assignment_operator to ensure no assignment operations for tuples
825        conditional_expression
826        | unary_expression assignment_operator assignment_expression
827                { $$ = new ExpressionNode( build_binary_val( $2, $1, $3 ) ); }
828        | unary_expression '=' '{' initializer_list_opt comma_opt '}'
829                { SemanticError( yylloc, "Initializer assignment is currently unimplemented." ); $$ = nullptr; }
830        ;
831
832assignment_expression_opt:
833        // empty
834                { $$ = nullptr; }
835        | assignment_expression
836        ;
837
838assignment_operator:
839        '='                                                                                     { $$ = OperKinds::Assign; }
840        | ATassign                                                                      { $$ = OperKinds::AtAssn; }
841        | EXPassign                                                                     { $$ = OperKinds::ExpAssn; }
842        | MULTassign                                                            { $$ = OperKinds::MulAssn; }
843        | DIVassign                                                                     { $$ = OperKinds::DivAssn; }
844        | MODassign                                                                     { $$ = OperKinds::ModAssn; }
845        | PLUSassign                                                            { $$ = OperKinds::PlusAssn; }
846        | MINUSassign                                                           { $$ = OperKinds::MinusAssn; }
847        | LSassign                                                                      { $$ = OperKinds::LSAssn; }
848        | RSassign                                                                      { $$ = OperKinds::RSAssn; }
849        | ANDassign                                                                     { $$ = OperKinds::AndAssn; }
850        | ERassign                                                                      { $$ = OperKinds::ERAssn; }
851        | ORassign                                                                      { $$ = OperKinds::OrAssn; }
852        ;
853
854tuple:                                                                                                  // CFA, tuple
855                // CFA, one assignment_expression is factored out of comma_expression to eliminate a shift/reduce conflict with
856                // comma_expression in cfa_identifier_parameter_array and cfa_abstract_array
857//      '[' ']'
858//              { $$ = new ExpressionNode( build_tuple() ); }
859//      | '[' push assignment_expression pop ']'
860//              { $$ = new ExpressionNode( build_tuple( $3 ) ); }
861        '[' ',' tuple_expression_list ']'
862                { $$ = new ExpressionNode( build_tuple( (ExpressionNode *)(new ExpressionNode( nullptr ) )->set_last( $3 ) ) ); }
863        | '[' push assignment_expression pop ',' tuple_expression_list ']'
864                { $$ = new ExpressionNode( build_tuple( (ExpressionNode *)$3->set_last( $6 ) ) ); }
865        ;
866
867tuple_expression_list:
868        assignment_expression_opt
869        | tuple_expression_list ',' assignment_expression_opt
870                { $$ = (ExpressionNode *)$1->set_last( $3 ); }
871        ;
872
873comma_expression:
874        assignment_expression
875        | comma_expression ',' assignment_expression
876                { $$ = new ExpressionNode( new CommaExpr( maybeMoveBuild< Expression >( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
877        ;
878
879comma_expression_opt:
880        // empty
881                { $$ = nullptr; }
882        | comma_expression
883        ;
884
885//*************************** STATEMENTS *******************************
886
887statement:
888        labeled_statement
889        | compound_statement
890        | expression_statement
891        | selection_statement
892        | iteration_statement
893        | jump_statement
894        | with_statement
895        | mutex_statement
896        | waitfor_statement
897        | exception_statement
898        | enable_disable_statement
899                { SemanticError( yylloc, "enable/disable statement is currently unimplemented." ); $$ = nullptr; }
900        | asm_statement
901        | DIRECTIVE
902                { $$ = new StatementNode( build_directive( $1 ) ); }
903        ;
904
905labeled_statement:
906                // labels cannot be identifiers 0 or 1 or ATTR_IDENTIFIER
907        identifier_or_type_name ':' attribute_list_opt statement
908                {
909                        $$ = $4->add_label( $1, $3 );
910                }
911        ;
912
913compound_statement:
914        '{' '}'
915                { $$ = new StatementNode( build_compound( (StatementNode *)0 ) ); }
916        | '{' push
917          local_label_declaration_opt                                           // GCC, local labels
918          statement_decl_list                                                           // C99, intermix declarations and statements
919          pop '}'
920                { $$ = new StatementNode( build_compound( $4 ) ); }
921        ;
922
923statement_decl_list:                                                                    // C99
924        statement_decl
925        | statement_decl_list statement_decl
926                { if ( $1 != 0 ) { $1->set_last( $2 ); $$ = $1; } }
927        ;
928
929statement_decl:
930        declaration                                                                                     // CFA, new & old style declarations
931                { $$ = new StatementNode( $1 ); }
932        | EXTENSION declaration                                                         // GCC
933                {
934                        distExt( $2 );
935                        $$ = new StatementNode( $2 );
936                }
937        | function_definition
938                { $$ = new StatementNode( $1 ); }
939        | EXTENSION function_definition                                         // GCC
940                {
941                        distExt( $2 );
942                        $$ = new StatementNode( $2 );
943                }
944        | statement
945        ;
946
947statement_list_nodecl:
948        statement
949        | statement_list_nodecl statement
950                { if ( $1 != 0 ) { $1->set_last( $2 ); $$ = $1; } }
951        ;
952
953expression_statement:
954        comma_expression_opt ';'
955                { $$ = new StatementNode( build_expr( $1 ) ); }
956        ;
957
958selection_statement:
959                        // pop causes a S/R conflict without separating the IF statement into a non-terminal even after resolving
960                        // the inherent S/R conflict with THEN/ELSE.
961        push if_statement pop
962                { $$ = $2; }
963        | SWITCH '(' comma_expression ')' case_clause
964                { $$ = new StatementNode( build_switch( true, $3, $5 ) ); }
965        | SWITCH '(' comma_expression ')' '{' push declaration_list_opt switch_clause_list_opt pop '}' // CFA
966                {
967                        StatementNode *sw = new StatementNode( build_switch( true, $3, $8 ) );
968                        // The semantics of the declaration list is changed to include associated initialization, which is performed
969                        // *before* the transfer to the appropriate case clause by hoisting the declarations into a compound
970                        // statement around the switch.  Statements after the initial declaration list can never be executed, and
971                        // therefore, are removed from the grammar even though C allows it. The change also applies to choose
972                        // statement.
973                        $$ = $7 ? new StatementNode( build_compound( (StatementNode *)((new StatementNode( $7 ))->set_last( sw )) ) ) : sw;
974                }
975        | CHOOSE '(' comma_expression ')' case_clause           // CFA
976                { $$ = new StatementNode( build_switch( false, $3, $5 ) ); }
977        | CHOOSE '(' comma_expression ')' '{' push declaration_list_opt switch_clause_list_opt pop '}' // CFA
978                {
979                        StatementNode *sw = new StatementNode( build_switch( false, $3, $8 ) );
980                        $$ = $7 ? new StatementNode( build_compound( (StatementNode *)((new StatementNode( $7 ))->set_last( sw )) ) ) : sw;
981                }
982        ;
983
984if_statement:
985        IF '(' if_control_expression ')' statement                      %prec THEN
986                // explicitly deal with the shift/reduce conflict on if/else
987                { $$ = new StatementNode( build_if( $3, $5, nullptr ) ); }
988        | IF '(' if_control_expression ')' statement ELSE statement
989                { $$ = new StatementNode( build_if( $3, $5, $7 ) ); }
990        ;
991
992if_control_expression:
993        comma_expression
994                { $$ = new IfCtl( nullptr, $1 ); }
995        | c_declaration                                                                         // no semi-colon
996                { $$ = new IfCtl( $1, nullptr ); }
997        | cfa_declaration                                                                       // no semi-colon
998                { $$ = new IfCtl( $1, nullptr ); }
999        | declaration comma_expression                                          // semi-colon separated
1000                { $$ = new IfCtl( $1, $2 ); }
1001        ;
1002
1003// CASE and DEFAULT clauses are only allowed in the SWITCH statement, precluding Duff's device. In addition, a case
1004// clause allows a list of values and subranges.
1005
1006case_value:                                                                                             // CFA
1007        constant_expression                                                     { $$ = $1; }
1008        | constant_expression ELLIPSIS constant_expression      // GCC, subrange
1009                { $$ = new ExpressionNode( new RangeExpr( maybeMoveBuild< Expression >( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
1010        | subrange                                                                                      // CFA, subrange
1011        ;
1012
1013case_value_list:                                                                                // CFA
1014        case_value                                                                      { $$ = new StatementNode( build_case( $1 ) ); }
1015                // convert case list, e.g., "case 1, 3, 5:" into "case 1: case 3: case 5"
1016        | case_value_list ',' case_value                        { $$ = (StatementNode *)($1->set_last( new StatementNode( build_case( $3 ) ) ) ); }
1017        ;
1018
1019case_label:                                                                                             // CFA
1020        CASE case_value_list ':'                                        { $$ = $2; }
1021        | DEFAULT ':'                                                           { $$ = new StatementNode( build_default() ); }
1022                // A semantic check is required to ensure only one default clause per switch/choose statement.
1023        ;
1024
1025//label_list_opt:
1026//      // empty
1027//      | identifier_or_type_name ':'
1028//      | label_list_opt identifier_or_type_name ':'
1029//      ;
1030
1031case_label_list:                                                                                // CFA
1032        case_label
1033        | case_label_list case_label                            { $$ = (StatementNode *)( $1->set_last( $2 )); }
1034        ;
1035
1036case_clause:                                                                                    // CFA
1037        case_label_list statement                                       { $$ = $1->append_last_case( new StatementNode( build_compound( $2 ) ) ); }
1038        ;
1039
1040switch_clause_list_opt:                                                                 // CFA
1041        // empty
1042                { $$ = nullptr; }
1043        | switch_clause_list
1044        ;
1045
1046switch_clause_list:                                                                             // CFA
1047        case_label_list statement_list_nodecl
1048                { $$ = $1->append_last_case( new StatementNode( build_compound( $2 ) ) ); }
1049        | switch_clause_list case_label_list statement_list_nodecl
1050                { $$ = (StatementNode *)( $1->set_last( $2->append_last_case( new StatementNode( build_compound( $3 ) ) ) ) ); }
1051        ;
1052
1053iteration_statement:
1054        WHILE '(' push if_control_expression ')' statement pop
1055                { $$ = new StatementNode( build_while( $4, $6 ) ); }
1056        | DO statement WHILE '(' comma_expression ')' ';'
1057                { $$ = new StatementNode( build_do_while( $5, $2 ) ); }
1058        | FOR '(' push for_control_expression ')' statement pop
1059                { $$ = new StatementNode( build_for( $4, $6 ) ); }
1060        ;
1061
1062for_control_expression:
1063        comma_expression_opt ';' comma_expression_opt ';' comma_expression_opt
1064                { $$ = new ForCtl( $1, $3, $5 ); }
1065        | declaration comma_expression_opt ';' comma_expression_opt // C99
1066                { $$ = new ForCtl( $1, $2, $4 ); }
1067        ;
1068
1069jump_statement:
1070        GOTO identifier_or_type_name ';'
1071                { $$ = new StatementNode( build_branch( $2, BranchStmt::Goto ) ); }
1072        | GOTO '*' comma_expression ';'                                         // GCC, computed goto
1073                // The syntax for the GCC computed goto violates normal expression precedence, e.g., goto *i+3; => goto *(i+3);
1074                // whereas normal operator precedence yields goto (*i)+3;
1075                { $$ = new StatementNode( build_computedgoto( $3 ) ); }
1076                // A semantic check is required to ensure fallthru appears only in the body of a choose statement.
1077    | fall_through_name ';'                                                             // CFA
1078                { $$ = new StatementNode( build_branch( BranchStmt::FallThrough ) ); }
1079    | fall_through_name identifier_or_type_name ';'             // CFA
1080                { $$ = new StatementNode( build_branch( $2, BranchStmt::FallThrough ) ); }
1081        | fall_through_name DEFAULT ';'                                         // CFA
1082                { $$ = new StatementNode( build_branch( BranchStmt::FallThroughDefault ) ); }
1083        | CONTINUE ';'
1084                // A semantic check is required to ensure this statement appears only in the body of an iteration statement.
1085                { $$ = new StatementNode( build_branch( BranchStmt::Continue ) ); }
1086        | CONTINUE identifier_or_type_name ';'                          // CFA, multi-level continue
1087                // A semantic check is required to ensure this statement appears only in the body of an iteration statement, and
1088                // the target of the transfer appears only at the start of an iteration statement.
1089                { $$ = new StatementNode( build_branch( $2, BranchStmt::Continue ) ); }
1090        | BREAK ';'
1091                // A semantic check is required to ensure this statement appears only in the body of an iteration statement.
1092                { $$ = new StatementNode( build_branch( BranchStmt::Break ) ); }
1093        | BREAK identifier_or_type_name ';'                                     // CFA, multi-level exit
1094                // A semantic check is required to ensure this statement appears only in the body of an iteration statement, and
1095                // the target of the transfer appears only at the start of an iteration statement.
1096                { $$ = new StatementNode( build_branch( $2, BranchStmt::Break ) ); }
1097        | RETURN comma_expression_opt ';'
1098                { $$ = new StatementNode( build_return( $2 ) ); }
1099        | RETURN '{' initializer_list_opt comma_opt '}'
1100                { SemanticError( yylloc, "Initializer return is currently unimplemented." ); $$ = nullptr; }
1101        | THROW assignment_expression_opt ';'                           // handles rethrow
1102                { $$ = new StatementNode( build_throw( $2 ) ); }
1103        | THROWRESUME assignment_expression_opt ';'                     // handles reresume
1104                { $$ = new StatementNode( build_resume( $2 ) ); }
1105        | THROWRESUME assignment_expression_opt AT assignment_expression ';' // handles reresume
1106                { $$ = new StatementNode( build_resume_at( $2, $4 ) ); }
1107        ;
1108
1109fall_through_name:                                                                              // CFA
1110        FALLTHRU
1111        | FALLTHROUGH
1112        ;
1113
1114with_statement:
1115        WITH '(' tuple_expression_list ')' statement
1116                {
1117                        $$ = new StatementNode( build_with( $3, $5 ) );
1118                }
1119        ;
1120
1121// If MUTEX becomes a general qualifier, there are shift/reduce conflicts, so change syntax to "with mutex".
1122mutex_statement:
1123        MUTEX '(' argument_expression_list ')' statement
1124                { SemanticError( yylloc, "Mutex statement is currently unimplemented." ); $$ = nullptr; }
1125        ;
1126
1127when_clause:
1128        WHEN '(' comma_expression ')'                           { $$ = $3; }
1129        ;
1130
1131when_clause_opt:
1132        // empty
1133                { $$ = nullptr; }
1134        | when_clause
1135        ;
1136
1137waitfor:
1138        WAITFOR '(' identifier ')'
1139                {
1140                        $$ = new ExpressionNode( new NameExpr( *$3 ) );
1141                        delete $3;
1142                }
1143        | WAITFOR '(' identifier ',' argument_expression_list ')'
1144                {
1145                        $$ = new ExpressionNode( new NameExpr( *$3 ) );
1146                        $$->set_last( $5 );
1147                        delete $3;
1148                }
1149        ;
1150
1151timeout:
1152        TIMEOUT '(' comma_expression ')'                        { $$ = $3; }
1153        ;
1154
1155waitfor_clause:
1156        when_clause_opt waitfor statement                                       %prec THEN
1157                { $$ = build_waitfor( $2, $3, $1 ); }
1158        | when_clause_opt waitfor statement WOR waitfor_clause
1159                { $$ = build_waitfor( $2, $3, $1, $5 ); }
1160        | when_clause_opt timeout statement                                     %prec THEN
1161                { $$ = build_waitfor_timeout( $2, $3, $1 ); }
1162        | when_clause_opt ELSE statement
1163                { $$ = build_waitfor_timeout( nullptr, $3, $1 ); }
1164                // "else" must be conditional after timeout or timeout is never triggered (i.e., it is meaningless)
1165        | when_clause_opt timeout statement WOR when_clause ELSE statement
1166                { $$ = build_waitfor_timeout( $2, $3, $1, $7, $5 ); }
1167        ;
1168
1169waitfor_statement:
1170        when_clause_opt waitfor statement                                       %prec THEN
1171                { $$ = new StatementNode( build_waitfor( $2, $3, $1 ) ); }
1172        | when_clause_opt waitfor statement WOR waitfor_clause
1173                { $$ = new StatementNode( build_waitfor( $2, $3, $1, $5 ) ); }
1174        ;
1175
1176exception_statement:
1177        TRY compound_statement handler_clause
1178                { $$ = new StatementNode( build_try( $2, $3, 0 ) ); }
1179        | TRY compound_statement finally_clause
1180                { $$ = new StatementNode( build_try( $2, 0, $3 ) ); }
1181        | TRY compound_statement handler_clause finally_clause
1182                { $$ = new StatementNode( build_try( $2, $3, $4 ) ); }
1183        ;
1184
1185handler_clause:
1186        handler_key '(' push exception_declaration pop handler_predicate_opt ')' compound_statement pop
1187                { $$ = new StatementNode( build_catch( $1, $4, $6, $8 ) ); }
1188        | handler_clause handler_key '(' push exception_declaration pop handler_predicate_opt ')' compound_statement pop
1189                { $$ = (StatementNode *)$1->set_last( new StatementNode( build_catch( $2, $5, $7, $9 ) ) ); }
1190        ;
1191
1192handler_predicate_opt:
1193        // empty
1194                { $$ = nullptr; }
1195        | ';' conditional_expression                            { $$ = $2; }
1196        ;
1197
1198handler_key:
1199        CATCH                                                                           { $$ = CatchStmt::Terminate; }
1200        | CATCHRESUME                                                           { $$ = CatchStmt::Resume; }
1201        ;
1202
1203finally_clause:
1204        FINALLY compound_statement                                      { $$ = new StatementNode( build_finally( $2 ) ); }
1205        ;
1206
1207exception_declaration:
1208                // No SUE declaration in parameter list.
1209        type_specifier_nobody
1210        | type_specifier_nobody declarator
1211                { $$ = $2->addType( $1 ); }
1212        | type_specifier_nobody variable_abstract_declarator
1213                { $$ = $2->addType( $1 ); }
1214        | cfa_abstract_declarator_tuple no_attr_identifier      // CFA
1215                { $$ = $1->addName( $2 ); }
1216        | cfa_abstract_declarator_tuple                                         // CFA
1217        ;
1218
1219enable_disable_statement:
1220        enable_disable_key identifier_list compound_statement
1221        ;
1222
1223enable_disable_key:
1224        ENABLE
1225        | DISABLE
1226        ;
1227
1228asm_statement:
1229        ASM asm_volatile_opt '(' string_literal ')' ';'
1230                { $$ = new StatementNode( build_asm( $2, $4, 0 ) ); }
1231        | ASM asm_volatile_opt '(' string_literal ':' asm_operands_opt ')' ';' // remaining GCC
1232                { $$ = new StatementNode( build_asm( $2, $4, $6 ) ); }
1233        | ASM asm_volatile_opt '(' string_literal ':' asm_operands_opt ':' asm_operands_opt ')' ';'
1234                { $$ = new StatementNode( build_asm( $2, $4, $6, $8 ) ); }
1235        | ASM asm_volatile_opt '(' string_literal ':' asm_operands_opt ':' asm_operands_opt ':' asm_clobbers_list_opt ')' ';'
1236                { $$ = new StatementNode( build_asm( $2, $4, $6, $8, $10 ) ); }
1237        | ASM asm_volatile_opt GOTO '(' string_literal ':' ':' asm_operands_opt ':' asm_clobbers_list_opt ':' label_list ')' ';'
1238                { $$ = new StatementNode( build_asm( $2, $5, 0, $8, $10, $12 ) ); }
1239        ;
1240
1241asm_volatile_opt:                                                                               // GCC
1242        // empty
1243                { $$ = false; }
1244        | VOLATILE
1245                { $$ = true; }
1246        ;
1247
1248asm_operands_opt:                                                                               // GCC
1249        // empty
1250                { $$ = nullptr; }                                                               // use default argument
1251        | asm_operands_list
1252        ;
1253
1254asm_operands_list:                                                                              // GCC
1255        asm_operand
1256        | asm_operands_list ',' asm_operand
1257                { $$ = (ExpressionNode *)$1->set_last( $3 ); }
1258        ;
1259
1260asm_operand:                                                                                    // GCC
1261        string_literal '(' constant_expression ')'
1262                { $$ = new ExpressionNode( new AsmExpr( maybeMoveBuild< Expression >( (ExpressionNode *)nullptr ), $1, maybeMoveBuild< Expression >( $3 ) ) ); }
1263        | '[' constant_expression ']' string_literal '(' constant_expression ')'
1264                { $$ = new ExpressionNode( new AsmExpr( maybeMoveBuild< Expression >( $2 ), $4, maybeMoveBuild< Expression >( $6 ) ) ); }
1265        ;
1266
1267asm_clobbers_list_opt:                                                                  // GCC
1268        // empty
1269                { $$ = nullptr; }                                                               // use default argument
1270        | string_literal
1271                { $$ = new ExpressionNode( $1 ); }
1272        | asm_clobbers_list_opt ',' string_literal
1273                // set_last returns ParseNode *
1274                { $$ = (ExpressionNode *)$1->set_last( new ExpressionNode( $3 ) ); }
1275        ;
1276
1277label_list:
1278        no_attr_identifier
1279                {
1280                        $$ = new LabelNode(); $$->labels.push_back( *$1 );
1281                        delete $1;                                                                      // allocated by lexer
1282                }
1283        | label_list ',' no_attr_identifier
1284                {
1285                        $$ = $1; $1->labels.push_back( *$3 );
1286                        delete $3;                                                                      // allocated by lexer
1287                }
1288        ;
1289
1290//******************************* DECLARATIONS *********************************
1291
1292declaration_list_opt:                                                                   // used at beginning of switch statement
1293        // empty
1294                { $$ = nullptr; }
1295        | declaration_list
1296        ;
1297
1298declaration_list:
1299        declaration
1300        | declaration_list declaration
1301                { $$ = $1->appendList( $2 ); }
1302        ;
1303
1304KR_parameter_list_opt:                                                                  // used to declare parameter types in K&R style functions
1305        // empty
1306                { $$ = nullptr; }
1307        | KR_parameter_list
1308        ;
1309
1310KR_parameter_list:
1311        push c_declaration pop ';'
1312                { $$ = $2; }
1313        | KR_parameter_list push c_declaration pop ';'
1314                { $$ = $1->appendList( $3 ); }
1315        ;
1316
1317local_label_declaration_opt:                                                    // GCC, local label
1318        // empty
1319        | local_label_declaration_list
1320        ;
1321
1322local_label_declaration_list:                                                   // GCC, local label
1323        LABEL local_label_list ';'
1324        | local_label_declaration_list LABEL local_label_list ';'
1325        ;
1326
1327local_label_list:                                                                               // GCC, local label
1328        no_attr_identifier_or_type_name
1329        | local_label_list ',' no_attr_identifier_or_type_name
1330        ;
1331
1332declaration:                                                                                    // old & new style declarations
1333        c_declaration ';'
1334        | cfa_declaration ';'                                                           // CFA
1335        | static_assert                                                                         // C11
1336        ;
1337
1338static_assert:
1339        STATICASSERT '(' constant_expression ',' string_literal ')' ';' // C11
1340                { $$ = DeclarationNode::newStaticAssert( $3, $5 ); }
1341        | STATICASSERT '(' constant_expression ')' ';'          // CFA
1342                { $$ = DeclarationNode::newStaticAssert( $3, build_constantStr( *new string( "\"\"" ) ) ); }
1343
1344// C declaration syntax is notoriously confusing and error prone. Cforall provides its own type, variable and function
1345// declarations. CFA declarations use the same declaration tokens as in C; however, CFA places declaration modifiers to
1346// the left of the base type, while C declarations place modifiers to the right of the base type. CFA declaration
1347// modifiers are interpreted from left to right and the entire type specification is distributed across all variables in
1348// the declaration list (as in Pascal).  ANSI C and the new CFA declarations may appear together in the same program
1349// block, but cannot be mixed within a specific declaration.
1350//
1351//                      CFA                                     C
1352//              [10] int x;                     int x[10];              // array of 10 integers
1353//              [10] * char y;          char *y[10];    // array of 10 pointers to char
1354
1355cfa_declaration:                                                                                // CFA
1356        cfa_variable_declaration
1357        | cfa_typedef_declaration
1358        | cfa_function_declaration
1359        | type_declaring_list
1360        | trait_specifier
1361        ;
1362
1363cfa_variable_declaration:                                                               // CFA
1364        cfa_variable_specifier initializer_opt
1365                { $$ = $1->addInitializer( $2 ); }
1366        | declaration_qualifier_list cfa_variable_specifier initializer_opt
1367                // declaration_qualifier_list also includes type_qualifier_list, so a semantic check is necessary to preclude
1368                // them as a type_qualifier cannot appear in that context.
1369                { $$ = $2->addQualifiers( $1 )->addInitializer( $3 ); }
1370        | cfa_variable_declaration pop ',' push identifier_or_type_name initializer_opt
1371                { $$ = $1->appendList( $1->cloneType( $5 )->addInitializer( $6 ) ); }
1372        ;
1373
1374cfa_variable_specifier:                                                                 // CFA
1375                // A semantic check is required to ensure asm_name only appears on declarations with implicit or explicit static
1376                // storage-class
1377        cfa_abstract_declarator_no_tuple identifier_or_type_name asm_name_opt
1378                { $$ = $1->addName( $2 )->addAsmName( $3 ); }
1379        | cfa_abstract_tuple identifier_or_type_name asm_name_opt
1380                { $$ = $1->addName( $2 )->addAsmName( $3 ); }
1381        | type_qualifier_list cfa_abstract_tuple identifier_or_type_name asm_name_opt
1382                { $$ = $2->addQualifiers( $1 )->addName( $3 )->addAsmName( $4 ); }
1383        ;
1384
1385cfa_function_declaration:                                                               // CFA
1386        cfa_function_specifier
1387        | type_qualifier_list cfa_function_specifier
1388                { $$ = $2->addQualifiers( $1 ); }
1389        | declaration_qualifier_list cfa_function_specifier
1390                { $$ = $2->addQualifiers( $1 ); }
1391        | declaration_qualifier_list type_qualifier_list cfa_function_specifier
1392                { $$ = $3->addQualifiers( $1 )->addQualifiers( $2 ); }
1393        | cfa_function_declaration ',' identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')'
1394                {
1395                        // Append the return type at the start (left-hand-side) to each identifier in the list.
1396                        DeclarationNode * ret = new DeclarationNode;
1397                        ret->type = maybeClone( $1->type->base );
1398                        $$ = $1->appendList( DeclarationNode::newFunction( $3, ret, $6, nullptr ) );
1399                }
1400        ;
1401
1402cfa_function_specifier:                                                                 // CFA
1403//      '[' ']' identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')' // S/R conflict
1404//              {
1405//                      $$ = DeclarationNode::newFunction( $3, DeclarationNode::newTuple( 0 ), $6, 0, true );
1406//              }
1407//      '[' ']' identifier '(' push cfa_parameter_ellipsis_list_opt pop ')'
1408//              {
1409//                      typedefTable.setNextIdentifier( *$5 );
1410//                      $$ = DeclarationNode::newFunction( $5, DeclarationNode::newTuple( 0 ), $8, 0, true );
1411//              }
1412//      | '[' ']' TYPEDEFname '(' push cfa_parameter_ellipsis_list_opt pop ')'
1413//              {
1414//                      typedefTable.setNextIdentifier( *$5 );
1415//                      $$ = DeclarationNode::newFunction( $5, DeclarationNode::newTuple( 0 ), $8, 0, true );
1416//              }
1417//      | '[' ']' typegen_name
1418                // identifier_or_type_name must be broken apart because of the sequence:
1419                //
1420                //   '[' ']' identifier_or_type_name '(' cfa_parameter_ellipsis_list_opt ')'
1421                //   '[' ']' type_specifier
1422                //
1423                // type_specifier can resolve to just TYPEDEFname (e.g., typedef int T; int f( T );). Therefore this must be
1424                // flattened to allow lookahead to the '(' without having to reduce identifier_or_type_name.
1425        cfa_abstract_tuple identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')'
1426                // To obtain LR(1 ), this rule must be factored out from function return type (see cfa_abstract_declarator).
1427                { $$ = DeclarationNode::newFunction( $2, $1, $5, 0 ); }
1428        | cfa_function_return identifier_or_type_name '(' push cfa_parameter_ellipsis_list_opt pop ')'
1429                { $$ = DeclarationNode::newFunction( $2, $1, $5, 0 ); }
1430        ;
1431
1432cfa_function_return:                                                                    // CFA
1433        '[' push cfa_parameter_list pop ']'
1434                { $$ = DeclarationNode::newTuple( $3 ); }
1435        | '[' push cfa_parameter_list pop ',' push cfa_abstract_parameter_list pop ']'
1436                // To obtain LR(1 ), the last cfa_abstract_parameter_list is added into this flattened rule to lookahead to the ']'.
1437                { $$ = DeclarationNode::newTuple( $3->appendList( $7 ) ); }
1438        ;
1439
1440cfa_typedef_declaration:                                                                // CFA
1441        TYPEDEF cfa_variable_specifier
1442                {
1443                        typedefTable.addToEnclosingScope( *$2->name, TYPEDEFname, "1" );
1444                        $$ = $2->addTypedef();
1445                }
1446        | TYPEDEF cfa_function_specifier
1447                {
1448                        typedefTable.addToEnclosingScope( *$2->name, TYPEDEFname, "2" );
1449                        $$ = $2->addTypedef();
1450                }
1451        | cfa_typedef_declaration pop ',' push no_attr_identifier
1452                {
1453                        typedefTable.addToEnclosingScope( *$5, TYPEDEFname, "3" );
1454                        $$ = $1->appendList( $1->cloneType( $5 ) );
1455                }
1456        ;
1457
1458// Traditionally typedef is part of storage-class specifier for syntactic convenience only. Here, it is factored out as
1459// a separate form of declaration, which syntactically precludes storage-class specifiers and initialization.
1460
1461typedef_declaration:
1462        TYPEDEF type_specifier declarator
1463                {
1464                        typedefTable.addToEnclosingScope( *$3->name, TYPEDEFname, "4" );
1465                        $$ = $3->addType( $2 )->addTypedef();
1466                }
1467        | typedef_declaration pop ',' push declarator
1468                {
1469                        typedefTable.addToEnclosingScope( *$5->name, TYPEDEFname, "5" );
1470                        $$ = $1->appendList( $1->cloneBaseType( $5 )->addTypedef() );
1471                }
1472        | type_qualifier_list TYPEDEF type_specifier declarator // remaining OBSOLESCENT (see 2 )
1473                {
1474                        typedefTable.addToEnclosingScope( *$4->name, TYPEDEFname, "6" );
1475                        $$ = $4->addType( $3 )->addQualifiers( $1 )->addTypedef();
1476                }
1477        | type_specifier TYPEDEF declarator
1478                {
1479                        typedefTable.addToEnclosingScope( *$3->name, TYPEDEFname, "7" );
1480                        $$ = $3->addType( $1 )->addTypedef();
1481                }
1482        | type_specifier TYPEDEF type_qualifier_list declarator
1483                {
1484                        typedefTable.addToEnclosingScope( *$4->name, TYPEDEFname, "8" );
1485                        $$ = $4->addQualifiers( $1 )->addTypedef()->addType( $1 );
1486                }
1487        ;
1488
1489typedef_expression:
1490                // GCC, naming expression type: typedef name = exp; gives a name to the type of an expression
1491        TYPEDEF no_attr_identifier '=' assignment_expression
1492                {
1493                        // $$ = DeclarationNode::newName( 0 );                  // unimplemented
1494                        SemanticError( yylloc, "Typedef expression is currently unimplemented." ); $$ = nullptr;
1495                }
1496        | typedef_expression pop ',' push no_attr_identifier '=' assignment_expression
1497                {
1498                        // $$ = DeclarationNode::newName( 0 );                  // unimplemented
1499                        SemanticError( yylloc, "Typedef expression is currently unimplemented." ); $$ = nullptr;
1500                }
1501        ;
1502
1503//c_declaration:
1504//      declaring_list pop ';'
1505//      | typedef_declaration pop ';'
1506//      | typedef_expression pop ';'                                            // GCC, naming expression type
1507//      | sue_declaration_specifier pop ';'
1508//      ;
1509//
1510//declaring_list:
1511//              // A semantic check is required to ensure asm_name only appears on declarations with implicit or explicit static
1512//              // storage-class
1513//       declarator asm_name_opt initializer_opt
1514//              {
1515//                      typedefTable.addToEnclosingScope( IDENTIFIER );
1516//                      $$ = ( $2->addType( $1 ))->addAsmName( $3 )->addInitializer( $4 );
1517//              }
1518//      | declaring_list ',' attribute_list_opt declarator asm_name_opt initializer_opt
1519//              {
1520//                      typedefTable.addToEnclosingScope( IDENTIFIER );
1521//                      $$ = $1->appendList( $1->cloneBaseType( $4->addAsmName( $5 )->addInitializer( $6 ) ) );
1522//              }
1523//      ;
1524
1525c_declaration:
1526        declaration_specifier declaring_list
1527                { $$ = distAttr( $1, $2 ); }
1528        | typedef_declaration
1529        | typedef_expression                                                            // GCC, naming expression type
1530        | sue_declaration_specifier
1531        ;
1532
1533declaring_list:
1534                // A semantic check is required to ensure asm_name only appears on declarations with implicit or explicit static
1535                // storage-class
1536        declarator asm_name_opt initializer_opt
1537                { $$ = $1->addAsmName( $2 )->addInitializer( $3 ); }
1538        | declaring_list ',' attribute_list_opt declarator asm_name_opt initializer_opt
1539                { $$ = $1->appendList( $4->addQualifiers( $3 )->addAsmName( $5 )->addInitializer( $6 ) ); }
1540        ;
1541
1542declaration_specifier:                                                                  // type specifier + storage class
1543        basic_declaration_specifier
1544        | sue_declaration_specifier
1545        | type_declaration_specifier
1546        ;
1547
1548declaration_specifier_nobody:                                                   // type specifier + storage class - {...}
1549                // Preclude SUE declarations in restricted scopes:
1550                //
1551                //    int f( struct S { int i; } s1, Struct S s2 ) { struct S s3; ... }
1552                //
1553                // because it is impossible to call f due to name equivalence.
1554        basic_declaration_specifier
1555        | sue_declaration_specifier_nobody
1556        | type_declaration_specifier
1557        ;
1558
1559type_specifier:                                                                                 // type specifier
1560        basic_type_specifier
1561        | sue_type_specifier
1562        | type_type_specifier
1563        ;
1564
1565type_specifier_nobody:                                                                  // type specifier - {...}
1566                // Preclude SUE declarations in restricted scopes:
1567                //
1568                //    int f( struct S { int i; } s1, Struct S s2 ) { struct S s3; ... }
1569                //
1570                // because it is impossible to call f due to name equivalence.
1571        basic_type_specifier
1572        | sue_type_specifier_nobody
1573        | type_type_specifier
1574        ;
1575
1576type_qualifier_list_opt:                                                                // GCC, used in asm_statement
1577        // empty
1578                { $$ = nullptr; }
1579        | type_qualifier_list
1580        ;
1581
1582type_qualifier_list:
1583                // A semantic check is necessary to ensure a type qualifier is appropriate for the kind of declaration.
1584                //
1585                // ISO/IEC 9899:1999 Section 6.7.3(4 ) : If the same qualifier appears more than once in the same
1586                // specifier-qualifier-list, either directly or via one or more typedefs, the behavior is the same as if it
1587                // appeared only once.
1588        type_qualifier
1589        | type_qualifier_list type_qualifier
1590                { $$ = $1->addQualifiers( $2 ); }
1591        ;
1592
1593type_qualifier:
1594        type_qualifier_name
1595        | attribute
1596        ;
1597
1598type_qualifier_name:
1599        CONST
1600                { $$ = DeclarationNode::newTypeQualifier( Type::Const ); }
1601        | RESTRICT
1602                { $$ = DeclarationNode::newTypeQualifier( Type::Restrict ); }
1603        | VOLATILE
1604                { $$ = DeclarationNode::newTypeQualifier( Type::Volatile ); }
1605        | ATOMIC
1606                { $$ = DeclarationNode::newTypeQualifier( Type::Atomic ); }
1607        | forall
1608        ;
1609
1610forall:
1611        FORALL '(' type_parameter_list ')'                                      // CFA
1612                { $$ = DeclarationNode::newForall( $3 ); }
1613        ;
1614
1615declaration_qualifier_list:
1616        storage_class_list
1617        | type_qualifier_list storage_class_list                        // remaining OBSOLESCENT (see 2 )
1618                { $$ = $1->addQualifiers( $2 ); }
1619        | declaration_qualifier_list type_qualifier_list storage_class_list
1620                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
1621        ;
1622
1623storage_class_list:
1624                // A semantic check is necessary to ensure a storage class is appropriate for the kind of declaration and that
1625                // only one of each is specified, except for inline, which can appear with the others.
1626                //
1627                // ISO/IEC 9899:1999 Section 6.7.1(2) : At most, one storage-class specifier may be given in the declaration
1628                // specifiers in a declaration.
1629        storage_class
1630        | storage_class_list storage_class
1631                { $$ = $1->addQualifiers( $2 ); }
1632        ;
1633
1634storage_class:
1635        EXTERN
1636                { $$ = DeclarationNode::newStorageClass( Type::Extern ); }
1637        | STATIC
1638                { $$ = DeclarationNode::newStorageClass( Type::Static ); }
1639        | AUTO
1640                { $$ = DeclarationNode::newStorageClass( Type::Auto ); }
1641        | REGISTER
1642                { $$ = DeclarationNode::newStorageClass( Type::Register ); }
1643        | THREADLOCAL                                                                           // C11
1644                { $$ = DeclarationNode::newStorageClass( Type::Threadlocal ); }
1645                // Put function specifiers here to simplify parsing rules, but separate them semantically.
1646        | INLINE                                                                                        // C99
1647                { $$ = DeclarationNode::newFuncSpecifier( Type::Inline ); }
1648        | FORTRAN                                                                                       // C99
1649                { $$ = DeclarationNode::newFuncSpecifier( Type::Fortran ); }
1650        | NORETURN                                                                                      // C11
1651                { $$ = DeclarationNode::newFuncSpecifier( Type::Noreturn ); }
1652        ;
1653
1654basic_type_name:
1655        VOID
1656                { $$ = DeclarationNode::newBasicType( DeclarationNode::Void ); }
1657        | BOOL                                                                                          // C99
1658                { $$ = DeclarationNode::newBasicType( DeclarationNode::Bool ); }
1659        | CHAR
1660                { $$ = DeclarationNode::newBasicType( DeclarationNode::Char ); }
1661        | INT
1662                { $$ = DeclarationNode::newBasicType( DeclarationNode::Int ); }
1663        | INT128
1664                { $$ = DeclarationNode::newBasicType( DeclarationNode::Int128 ); }
1665        | FLOAT
1666                { $$ = DeclarationNode::newBasicType( DeclarationNode::Float ); }
1667        | FLOAT80
1668                { $$ = DeclarationNode::newBasicType( DeclarationNode::Float80 ); }
1669        | FLOAT128
1670                { $$ = DeclarationNode::newBasicType( DeclarationNode::Float128 ); }
1671        | DOUBLE
1672                { $$ = DeclarationNode::newBasicType( DeclarationNode::Double ); }
1673        | COMPLEX                                                                                       // C99
1674                { $$ = DeclarationNode::newComplexType( DeclarationNode::Complex ); }
1675        | IMAGINARY                                                                                     // C99
1676                { $$ = DeclarationNode::newComplexType( DeclarationNode::Imaginary ); }
1677        | SIGNED
1678                { $$ = DeclarationNode::newSignedNess( DeclarationNode::Signed ); }
1679        | UNSIGNED
1680                { $$ = DeclarationNode::newSignedNess( DeclarationNode::Unsigned ); }
1681        | SHORT
1682                { $$ = DeclarationNode::newLength( DeclarationNode::Short ); }
1683        | LONG
1684                { $$ = DeclarationNode::newLength( DeclarationNode::Long ); }
1685        | VALIST                                                                                        // GCC, __builtin_va_list
1686                { $$ = DeclarationNode::newBuiltinType( DeclarationNode::Valist ); }
1687        ;
1688
1689basic_declaration_specifier:
1690                // A semantic check is necessary for conflicting storage classes.
1691        basic_type_specifier
1692        | declaration_qualifier_list basic_type_specifier
1693                { $$ = $2->addQualifiers( $1 ); }
1694        | basic_declaration_specifier storage_class                     // remaining OBSOLESCENT (see 2)
1695                { $$ = $1->addQualifiers( $2 ); }
1696        | basic_declaration_specifier storage_class type_qualifier_list
1697                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
1698        | basic_declaration_specifier storage_class basic_type_specifier
1699                { $$ = $3->addQualifiers( $2 )->addType( $1 ); }
1700        ;
1701
1702basic_type_specifier:
1703        direct_type
1704                // Cannot have type modifiers, e.g., short, long, etc.
1705        | type_qualifier_list_opt indirect_type type_qualifier_list_opt
1706                { $$ = $2->addQualifiers( $1 )->addQualifiers( $3 ); }
1707        ;
1708
1709direct_type:
1710        basic_type_name
1711        | type_qualifier_list basic_type_name
1712                { $$ = $2->addQualifiers( $1 ); }
1713        | direct_type type_qualifier
1714                { $$ = $1->addQualifiers( $2 ); }
1715        | direct_type basic_type_name
1716                { $$ = $1->addType( $2 ); }
1717        ;
1718
1719indirect_type:
1720        TYPEOF '(' type ')'                                                                     // GCC: typeof(x) y;
1721                { $$ = $3; }
1722        | TYPEOF '(' comma_expression ')'                                       // GCC: typeof(a+b) y;
1723                { $$ = DeclarationNode::newTypeof( $3 ); }
1724        | ATTR_TYPEGENname '(' type ')'                                         // CFA: e.g., @type(x) y;
1725                { $$ = DeclarationNode::newAttr( $1, $3 ); }
1726        | ATTR_TYPEGENname '(' comma_expression ')'                     // CFA: e.g., @type(a+b) y;
1727                { $$ = DeclarationNode::newAttr( $1, $3 ); }
1728        | ZERO_T                                                                                        // CFA
1729                { $$ = DeclarationNode::newBuiltinType( DeclarationNode::Zero ); }
1730        | ONE_T                                                                                         // CFA
1731                { $$ = DeclarationNode::newBuiltinType( DeclarationNode::One ); }
1732        ;
1733
1734sue_declaration_specifier:                                                              // struct, union, enum + storage class + type specifier
1735        sue_type_specifier
1736        | declaration_qualifier_list sue_type_specifier
1737                { $$ = $2->addQualifiers( $1 ); }
1738        | sue_declaration_specifier storage_class                       // remaining OBSOLESCENT (see 2)
1739                { $$ = $1->addQualifiers( $2 ); }
1740        | sue_declaration_specifier storage_class type_qualifier_list
1741                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
1742        ;
1743
1744sue_type_specifier:                                                                             // struct, union, enum + type specifier
1745        elaborated_type
1746        | type_qualifier_list
1747                { if ( $1->type != nullptr && $1->type->forall ) forall = true; } // remember generic type
1748          elaborated_type
1749                { $$ = $3->addQualifiers( $1 ); }
1750        | sue_type_specifier type_qualifier
1751                { $$ = $1->addQualifiers( $2 ); }
1752        ;
1753
1754sue_declaration_specifier_nobody:                                               // struct, union, enum - {...} + storage class + type specifier
1755        sue_type_specifier_nobody
1756        | declaration_qualifier_list sue_type_specifier_nobody
1757                { $$ = $2->addQualifiers( $1 ); }
1758        | sue_declaration_specifier_nobody storage_class        // remaining OBSOLESCENT (see 2)
1759                { $$ = $1->addQualifiers( $2 ); }
1760        | sue_declaration_specifier_nobody storage_class type_qualifier_list
1761                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
1762        ;
1763
1764sue_type_specifier_nobody:                                                              // struct, union, enum - {...} + type specifier
1765        elaborated_type_nobody
1766        | type_qualifier_list elaborated_type_nobody
1767                { $$ = $2->addQualifiers( $1 ); }
1768        | sue_type_specifier_nobody type_qualifier
1769                { $$ = $1->addQualifiers( $2 ); }
1770        ;
1771
1772type_declaration_specifier:
1773        type_type_specifier
1774        | declaration_qualifier_list type_type_specifier
1775                { $$ = $2->addQualifiers( $1 ); }
1776        | type_declaration_specifier storage_class                      // remaining OBSOLESCENT (see 2)
1777                { $$ = $1->addQualifiers( $2 ); }
1778        | type_declaration_specifier storage_class type_qualifier_list
1779                { $$ = $1->addQualifiers( $2 )->addQualifiers( $3 ); }
1780        ;
1781
1782type_type_specifier:                                                                    // typedef types
1783        type_name
1784        | type_qualifier_list type_name
1785                { $$ = $2->addQualifiers( $1 ); }
1786        | type_type_specifier type_qualifier
1787                { $$ = $1->addQualifiers( $2 ); }
1788        ;
1789
1790type_name:
1791        TYPEDEFname
1792                { $$ = DeclarationNode::newFromTypedef( $1 ); }
1793        | '.' TYPEDEFname
1794                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
1795        | type_name '.' TYPEDEFname
1796                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
1797        | typegen_name
1798        | '.' typegen_name
1799                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
1800        | type_name '.' typegen_name
1801                { SemanticError( yylloc, "Qualified name is currently unimplemented." ); $$ = nullptr; }
1802        ;
1803
1804typegen_name:                                                                                   // CFA
1805        TYPEGENname
1806                { $$ = DeclarationNode::newFromTypeGen( $1, nullptr ); }
1807        | TYPEGENname '(' ')'
1808                { $$ = DeclarationNode::newFromTypeGen( $1, nullptr ); }
1809        | TYPEGENname '(' type_list ')'
1810                { $$ = DeclarationNode::newFromTypeGen( $1, $3 ); }
1811        ;
1812
1813elaborated_type:                                                                                // struct, union, enum
1814        aggregate_type
1815        | enum_type
1816        ;
1817
1818elaborated_type_nobody:                                                                 // struct, union, enum - {...}
1819        aggregate_type_nobody
1820        | enum_type_nobody
1821        ;
1822
1823fred:
1824        // empty
1825                { yyy = false; }
1826        ;
1827
1828aggregate_type:                                                                                 // struct, union
1829        aggregate_key attribute_list_opt '{' field_declaration_list_opt '}'
1830                { $$ = DeclarationNode::newAggregate( $1, new string( DeclarationNode::anonymous.newName() ), nullptr, $4, true )->addQualifiers( $2 ); }
1831        | aggregate_key attribute_list_opt no_attr_identifier fred
1832                {
1833                        typedefTable.makeTypedef( *$3, forall ? TYPEGENname : TYPEDEFname ); // create typedef
1834                        forall = false;                                                         // reset
1835                }
1836          '{' field_declaration_list_opt '}'
1837                { $$ = DeclarationNode::newAggregate( $1, $3, nullptr, $7, true )->addQualifiers( $2 ); }
1838        | aggregate_key attribute_list_opt type_name fred
1839                {
1840                        typedefTable.makeTypedef( *$3->type->symbolic.name, forall ? TYPEGENname : TYPEDEFname ); // create typedef
1841                        forall = false;                                                         // reset
1842                }
1843          '{' field_declaration_list_opt '}'
1844                { $$ = DeclarationNode::newAggregate( $1, $3->type->symbolic.name, nullptr, $7, true )->addQualifiers( $2 ); }
1845        | aggregate_key attribute_list_opt '(' type_list ')' '{' field_declaration_list_opt '}' // CFA
1846                { $$ = DeclarationNode::newAggregate( $1, new string( DeclarationNode::anonymous.newName() ), $4, $7, false )->addQualifiers( $2 ); }
1847        | aggregate_type_nobody
1848        ;
1849
1850aggregate_type_nobody:                                                                  // struct, union - {...}
1851        aggregate_key attribute_list_opt no_attr_identifier fred
1852                {
1853                        typedefTable.makeTypedef( *$3, forall ? TYPEGENname : TYPEDEFname );
1854                        forall = false;                                                         // reset
1855                        $$ = DeclarationNode::newAggregate( $1, $3, nullptr, nullptr, false )->addQualifiers( $2 );
1856                }
1857        | aggregate_key attribute_list_opt type_name fred
1858                {
1859                        // Create new generic declaration with same name as previous forward declaration, where the IDENTIFIER is
1860                        // switched to a TYPEGENname. Link any generic arguments from typegen_name to new generic declaration and
1861                        // delete newFromTypeGen.
1862                        $$ = DeclarationNode::newAggregate( $1, $3->type->symbolic.name, $3->type->symbolic.actuals, nullptr, false )->addQualifiers( $2 );
1863                        $3->type->symbolic.name = nullptr;
1864                        $3->type->symbolic.actuals = nullptr;
1865                        delete $3;
1866                }
1867        ;
1868
1869aggregate_key:
1870        STRUCT
1871                { yyy = true; $$ = DeclarationNode::Struct; }
1872        | UNION
1873                { yyy = true; $$ = DeclarationNode::Union; }
1874        | EXCEPTION
1875                { yyy = true; $$ = DeclarationNode::Exception; }
1876        | COROUTINE
1877                { yyy = true; $$ = DeclarationNode::Coroutine; }
1878        | MONITOR
1879                { yyy = true; $$ = DeclarationNode::Monitor; }
1880        | THREAD
1881                { yyy = true; $$ = DeclarationNode::Thread; }
1882        ;
1883
1884field_declaration_list_opt:
1885        // empty
1886                { $$ = nullptr; }
1887        | field_declaration_list_opt field_declaration
1888                { $$ = $1 ? $1->appendList( $2 ) : $2; }
1889        ;
1890
1891field_declaration:
1892        type_specifier field_declaring_list ';'
1893                { $$ = distAttr( $1, $2 ); }
1894        | EXTENSION type_specifier field_declaring_list ';'     // GCC
1895                { distExt( $3 ); $$ = distAttr( $2, $3 ); }             // mark all fields in list
1896        | typedef_declaration ';'                                                       // CFA
1897                { SemanticError( yylloc, "Typedef in aggregate is currently unimplemented." ); $$ = nullptr; }
1898        | cfa_field_declaring_list ';'                                          // CFA, new style field declaration
1899        | EXTENSION cfa_field_declaring_list ';'                        // GCC
1900                { distExt( $2 ); $$ = $2; }                                             // mark all fields in list
1901        | cfa_typedef_declaration ';'                                           // CFA
1902                { SemanticError( yylloc, "Typedef in aggregate is currently unimplemented." ); $$ = nullptr; }
1903        | static_assert                                                                         // C11
1904        ;
1905
1906cfa_field_declaring_list:                                                               // CFA, new style field declaration
1907        cfa_abstract_declarator_tuple                                           // CFA, no field name
1908        | cfa_abstract_declarator_tuple no_attr_identifier_or_type_name
1909                { $$ = $1->addName( $2 ); }
1910        | cfa_field_declaring_list ',' no_attr_identifier_or_type_name
1911                { $$ = $1->appendList( $1->cloneType( $3 ) ); }
1912        | cfa_field_declaring_list ','                                          // CFA, no field name
1913                { $$ = $1->appendList( $1->cloneType( 0 ) ); }
1914        ;
1915
1916field_declaring_list:
1917        field_declarator_opt
1918        | field_declaring_list ',' attribute_list_opt field_declarator_opt
1919                { $$ = $1->appendList( $4->addQualifiers( $3 ) ); }
1920        ;
1921
1922field_declarator_opt:
1923        // empty
1924                { $$ = DeclarationNode::newName( 0 ); /* XXX */ } // CFA, no field name
1925        // '@'
1926        //      { $$ = DeclarationNode::newName( new string( DeclarationNode::anonymous.newName() ) ); } // CFA, no field name
1927        | bit_subrange_size                                                                     // no field name
1928                { $$ = DeclarationNode::newBitfield( $1 ); }
1929        | variable_declarator bit_subrange_size_opt
1930                // A semantic check is required to ensure bit_subrange only appears on base type int.
1931                { $$ = $1->addBitfield( $2 ); }
1932        | variable_type_redeclarator bit_subrange_size_opt
1933                // A semantic check is required to ensure bit_subrange only appears on base type int.
1934                { $$ = $1->addBitfield( $2 ); }
1935        | variable_abstract_declarator                                          // CFA, no field name
1936        ;
1937
1938bit_subrange_size_opt:
1939        // empty
1940                { $$ = nullptr; }
1941        | bit_subrange_size
1942        ;
1943
1944bit_subrange_size:
1945        ':' constant_expression
1946                { $$ = $2; }
1947        ;
1948
1949enum_type:                                                                                              // enum
1950        ENUM attribute_list_opt '{' enumerator_list comma_opt '}'
1951                { $$ = DeclarationNode::newEnum( new string( DeclarationNode::anonymous.newName() ), $4, true )->addQualifiers( $2 ); }
1952        | ENUM attribute_list_opt no_attr_identifier
1953                { typedefTable.makeTypedef( *$3 ); }
1954          '{' enumerator_list comma_opt '}'
1955                { $$ = DeclarationNode::newEnum( $3, $6, true )->addQualifiers( $2 ); }
1956        | ENUM attribute_list_opt type_name
1957          '{' enumerator_list comma_opt '}'
1958                { $$ = DeclarationNode::newEnum( $3->type->symbolic.name, $5, true )->addQualifiers( $2 ); }
1959        | enum_type_nobody
1960        ;
1961
1962enum_type_nobody:                                                                               // enum - {...}
1963        ENUM attribute_list_opt no_attr_identifier
1964                {
1965                        typedefTable.makeTypedef( *$3 );
1966                        $$ = DeclarationNode::newEnum( $3, 0, false )->addQualifiers( $2 );
1967                }
1968        | ENUM attribute_list_opt type_name
1969                {
1970                        typedefTable.makeTypedef( *$3->type->symbolic.name );
1971                        $$ = DeclarationNode::newEnum( $3->type->symbolic.name, 0, false )->addQualifiers( $2 );
1972                }
1973        ;
1974
1975enumerator_list:
1976        no_attr_identifier_or_type_name enumerator_value_opt
1977                { $$ = DeclarationNode::newEnumConstant( $1, $2 ); }
1978        | enumerator_list ',' no_attr_identifier_or_type_name enumerator_value_opt
1979                { $$ = $1->appendList( DeclarationNode::newEnumConstant( $3, $4 ) ); }
1980        ;
1981
1982enumerator_value_opt:
1983        // empty
1984                { $$ = nullptr; }
1985        | '=' constant_expression
1986                { $$ = $2; }
1987        ;
1988
1989cfa_parameter_ellipsis_list_opt:                                                        // CFA, abstract + real
1990        // empty
1991                { $$ = DeclarationNode::newBasicType( DeclarationNode::Void ); }
1992        | ELLIPSIS
1993                { $$ = nullptr; }
1994        | cfa_abstract_parameter_list
1995        | cfa_parameter_list
1996        | cfa_parameter_list pop ',' push cfa_abstract_parameter_list
1997                { $$ = $1->appendList( $5 ); }
1998        | cfa_abstract_parameter_list pop ',' push ELLIPSIS
1999                { $$ = $1->addVarArgs(); }
2000        | cfa_parameter_list pop ',' push ELLIPSIS
2001                { $$ = $1->addVarArgs(); }
2002        ;
2003
2004cfa_parameter_list:                                                                             // CFA
2005                // To obtain LR(1) between cfa_parameter_list and cfa_abstract_tuple, the last cfa_abstract_parameter_list is
2006                // factored out from cfa_parameter_list, flattening the rules to get lookahead to the ']'.
2007        cfa_parameter_declaration
2008        | cfa_abstract_parameter_list pop ',' push cfa_parameter_declaration
2009                { $$ = $1->appendList( $5 ); }
2010        | cfa_parameter_list pop ',' push cfa_parameter_declaration
2011                { $$ = $1->appendList( $5 ); }
2012        | cfa_parameter_list pop ',' push cfa_abstract_parameter_list pop ',' push cfa_parameter_declaration
2013                { $$ = $1->appendList( $5 )->appendList( $9 ); }
2014        ;
2015
2016cfa_abstract_parameter_list:                                                    // CFA, new & old style abstract
2017        cfa_abstract_parameter_declaration
2018        | cfa_abstract_parameter_list pop ',' push cfa_abstract_parameter_declaration
2019                { $$ = $1->appendList( $5 ); }
2020        ;
2021
2022parameter_type_list_opt:
2023        // empty
2024                { $$ = nullptr; }
2025        | ELLIPSIS
2026                { $$ = nullptr; }
2027        | parameter_list
2028        | parameter_list pop ',' push ELLIPSIS
2029                { $$ = $1->addVarArgs(); }
2030        ;
2031
2032parameter_list:                                                                                 // abstract + real
2033        abstract_parameter_declaration
2034        | parameter_declaration
2035        | parameter_list pop ',' push abstract_parameter_declaration
2036                { $$ = $1->appendList( $5 ); }
2037        | parameter_list pop ',' push parameter_declaration
2038                { $$ = $1->appendList( $5 ); }
2039        ;
2040
2041// Provides optional identifier names (abstract_declarator/variable_declarator), no initialization, different semantics
2042// for typedef name by using type_parameter_redeclarator instead of typedef_redeclarator, and function prototypes.
2043
2044cfa_parameter_declaration:                                                              // CFA, new & old style parameter declaration
2045        parameter_declaration
2046        | cfa_identifier_parameter_declarator_no_tuple identifier_or_type_name default_initialize_opt
2047                { $$ = $1->addName( $2 ); }
2048        | cfa_abstract_tuple identifier_or_type_name default_initialize_opt
2049                // To obtain LR(1), these rules must be duplicated here (see cfa_abstract_declarator).
2050                { $$ = $1->addName( $2 ); }
2051        | type_qualifier_list cfa_abstract_tuple identifier_or_type_name default_initialize_opt
2052                { $$ = $2->addName( $3 )->addQualifiers( $1 ); }
2053        | cfa_function_specifier
2054        ;
2055
2056cfa_abstract_parameter_declaration:                                             // CFA, new & old style parameter declaration
2057        abstract_parameter_declaration
2058        | cfa_identifier_parameter_declarator_no_tuple
2059        | cfa_abstract_tuple
2060                // To obtain LR(1), these rules must be duplicated here (see cfa_abstract_declarator).
2061        | type_qualifier_list cfa_abstract_tuple
2062                { $$ = $2->addQualifiers( $1 ); }
2063        | cfa_abstract_function
2064        ;
2065
2066parameter_declaration:
2067                // No SUE declaration in parameter list.
2068        declaration_specifier_nobody identifier_parameter_declarator default_initialize_opt
2069                { $$ = $2->addType( $1 )->addInitializer( $3 ? new InitializerNode( $3 ) : nullptr ); }
2070        | declaration_specifier_nobody type_parameter_redeclarator default_initialize_opt
2071                { $$ = $2->addType( $1 )->addInitializer( $3 ? new InitializerNode( $3 ) : nullptr ); }
2072        ;
2073
2074abstract_parameter_declaration:
2075        declaration_specifier_nobody default_initialize_opt
2076                { $$ = $1->addInitializer( $2 ? new InitializerNode( $2 ) : nullptr ); }
2077        | declaration_specifier_nobody abstract_parameter_declarator default_initialize_opt
2078                { $$ = $2->addType( $1 )->addInitializer( $3 ? new InitializerNode( $3 ) : nullptr ); }
2079        ;
2080
2081// ISO/IEC 9899:1999 Section 6.9.1(6) : "An identifier declared as a typedef name shall not be redeclared as a
2082// parameter." Because the scope of the K&R-style parameter-list sees the typedef first, the following is based only on
2083// identifiers.  The ANSI-style parameter-list can redefine a typedef name.
2084
2085identifier_list:                                                                                // K&R-style parameter list => no types
2086        no_attr_identifier
2087                { $$ = DeclarationNode::newName( $1 ); }
2088        | identifier_list ',' no_attr_identifier
2089                { $$ = $1->appendList( DeclarationNode::newName( $3 ) ); }
2090        ;
2091
2092identifier_or_type_name:
2093        identifier
2094        | TYPEDEFname
2095        | TYPEGENname
2096        ;
2097
2098no_attr_identifier_or_type_name:
2099        no_attr_identifier
2100        | TYPEDEFname
2101        | TYPEGENname
2102        ;
2103
2104type_no_function:                                                                               // sizeof, alignof, cast (constructor)
2105        cfa_abstract_declarator_tuple                                           // CFA
2106        | type_specifier
2107        | type_specifier abstract_declarator
2108                { $$ = $2->addType( $1 ); }
2109        ;
2110
2111type:                                                                                                   // typeof, assertion
2112        type_no_function
2113        | cfa_abstract_function                                                         // CFA
2114        ;
2115
2116initializer_opt:
2117        // empty
2118                { $$ = nullptr; }
2119        | '=' initializer
2120                { $$ = $2; }
2121        | '=' VOID
2122                { $$ = new InitializerNode( true ); }
2123        | ATassign initializer
2124                { $$ = $2->set_maybeConstructed( false ); }
2125        ;
2126
2127initializer:
2128        assignment_expression                                           { $$ = new InitializerNode( $1 ); }
2129        | '{' initializer_list_opt comma_opt '}'        { $$ = new InitializerNode( $2, true ); }
2130        ;
2131
2132initializer_list_opt:
2133        // empty
2134                { $$ = nullptr; }
2135        | initializer
2136        | designation initializer                                       { $$ = $2->set_designators( $1 ); }
2137        | initializer_list_opt ',' initializer          { $$ = (InitializerNode *)( $1->set_last( $3 ) ); }
2138        | initializer_list_opt ',' designation initializer
2139                { $$ = (InitializerNode *)( $1->set_last( $4->set_designators( $3 ) ) ); }
2140        ;
2141
2142// There is an unreconcileable parsing problem between C99 and CFA with respect to designators. The problem is use of
2143// '=' to separator the designator from the initializer value, as in:
2144//
2145//              int x[10] = { [1] = 3 };
2146//
2147// The string "[1] = 3" can be parsed as a designator assignment or a tuple assignment.  To disambiguate this case, CFA
2148// changes the syntax from "=" to ":" as the separator between the designator and initializer. GCC does uses ":" for
2149// field selection. The optional use of the "=" in GCC, or in this case ":", cannot be supported either due to
2150// shift/reduce conflicts
2151
2152designation:
2153        designator_list ':'                                                                     // C99, CFA uses ":" instead of "="
2154        | no_attr_identifier ':'                                                        // GCC, field name
2155                { $$ = new ExpressionNode( build_varref( $1 ) ); }
2156        ;
2157
2158designator_list:                                                                                // C99
2159        designator
2160        | designator_list designator
2161                { $$ = (ExpressionNode *)( $1->set_last( $2 ) ); }
2162        //| designator_list designator                                          { $$ = new ExpressionNode( $1, $2 ); }
2163        ;
2164
2165designator:
2166        '.' no_attr_identifier                                                          // C99, field name
2167                { $$ = new ExpressionNode( build_varref( $2 ) ); }
2168        | '[' push assignment_expression pop ']'                        // C99, single array element
2169                // assignment_expression used instead of constant_expression because of shift/reduce conflicts with tuple.
2170                { $$ = $3; }
2171        | '[' push subrange pop ']'                                                     // CFA, multiple array elements
2172                { $$ = $3; }
2173        | '[' push constant_expression ELLIPSIS constant_expression pop ']' // GCC, multiple array elements
2174                { $$ = new ExpressionNode( new RangeExpr( maybeMoveBuild< Expression >( $3 ), maybeMoveBuild< Expression >( $5 ) ) ); }
2175        | '.' '[' push field_list pop ']'                                       // CFA, tuple field selector
2176                { $$ = $4; }
2177        ;
2178
2179// The CFA type system is based on parametric polymorphism, the ability to declare functions with type parameters,
2180// rather than an object-oriented type system. This required four groups of extensions:
2181//
2182// Overloading: function, data, and operator identifiers may be overloaded.
2183//
2184// Type declarations: "type" is used to generate new types for declaring objects. Similarly, "dtype" is used for object
2185//     and incomplete types, and "ftype" is used for function types. Type declarations with initializers provide
2186//     definitions of new types. Type declarations with storage class "extern" provide opaque types.
2187//
2188// Polymorphic functions: A forall clause declares a type parameter. The corresponding argument is inferred at the call
2189//     site. A polymorphic function is not a template; it is a function, with an address and a type.
2190//
2191// Specifications and Assertions: Specifications are collections of declarations parameterized by one or more
2192//     types. They serve many of the purposes of abstract classes, and specification hierarchies resemble subclass
2193//     hierarchies. Unlike classes, they can define relationships between types.  Assertions declare that a type or
2194//     types provide the operations declared by a specification.  Assertions are normally used to declare requirements
2195//     on type arguments of polymorphic functions.
2196
2197type_parameter_list:                                                                    // CFA
2198        type_parameter
2199        | type_parameter_list ',' type_parameter
2200                { $$ = $1->appendList( $3 ); }
2201        ;
2202
2203type_initializer_opt:                                                                   // CFA
2204        // empty
2205                { $$ = nullptr; }
2206        | '=' type
2207                { $$ = $2; }
2208        ;
2209
2210type_parameter:                                                                                 // CFA
2211        type_class no_attr_identifier_or_type_name
2212                { typedefTable.addToScope( *$2, TYPEDEFname, "9" ); }
2213          type_initializer_opt assertion_list_opt
2214                { $$ = DeclarationNode::newTypeParam( $1, $2 )->addTypeInitializer( $4 )->addAssertions( $5 ); }
2215        | type_specifier identifier_parameter_declarator
2216        | assertion_list
2217                { $$ = DeclarationNode::newTypeParam( DeclarationNode::Dtype, new string( DeclarationNode::anonymous.newName() ) )->addAssertions( $1 ); }
2218        ;
2219
2220type_class:                                                                                             // CFA
2221        OTYPE
2222                { $$ = DeclarationNode::Otype; }
2223        | DTYPE
2224                { $$ = DeclarationNode::Dtype; }
2225        | FTYPE
2226                { $$ = DeclarationNode::Ftype; }
2227        | TTYPE
2228                { $$ = DeclarationNode::Ttype; }
2229        ;
2230
2231assertion_list_opt:                                                                             // CFA
2232        // empty
2233                { $$ = nullptr; }
2234        | assertion_list
2235        ;
2236
2237assertion_list:                                                                                 // CFA
2238        assertion
2239        | assertion_list assertion
2240                { $$ = $1 ? $1->appendList( $2 ) : $2; }
2241        ;
2242
2243assertion:                                                                                              // CFA
2244        '|' no_attr_identifier_or_type_name '(' type_list ')'
2245                { $$ = DeclarationNode::newTraitUse( $2, $4 ); }
2246        | '|' '{' push trait_declaration_list pop '}'
2247                { $$ = $4; }
2248        // | '|' '(' push type_parameter_list pop ')' '{' push trait_declaration_list pop '}' '(' type_list ')'
2249        //      { SemanticError( yylloc, "Generic data-type assertion is currently unimplemented." ); $$ = nullptr; }
2250        ;
2251
2252type_list:                                                                                              // CFA
2253        type
2254                { $$ = new ExpressionNode( new TypeExpr( maybeMoveBuildType( $1 ) ) ); }
2255        | assignment_expression
2256        | type_list ',' type
2257                { $$ = (ExpressionNode *)( $1->set_last( new ExpressionNode( new TypeExpr( maybeMoveBuildType( $3 ) ) ) ) ); }
2258        | type_list ',' assignment_expression
2259                { $$ = (ExpressionNode *)( $1->set_last( $3 )); }
2260        ;
2261
2262type_declaring_list:                                                                    // CFA
2263        OTYPE type_declarator
2264                { $$ = $2; }
2265        | storage_class_list OTYPE type_declarator
2266                { $$ = $3->addQualifiers( $1 ); }
2267        | type_declaring_list ',' type_declarator
2268                { $$ = $1->appendList( $3->copySpecifiers( $1 ) ); }
2269        ;
2270
2271type_declarator:                                                                                // CFA
2272        type_declarator_name assertion_list_opt
2273                { $$ = $1->addAssertions( $2 ); }
2274        | type_declarator_name assertion_list_opt '=' type
2275                { $$ = $1->addAssertions( $2 )->addType( $4 ); }
2276        ;
2277
2278type_declarator_name:                                                                   // CFA
2279        no_attr_identifier_or_type_name
2280                {
2281                        typedefTable.addToEnclosingScope( *$1, TYPEDEFname, "10" );
2282                        $$ = DeclarationNode::newTypeDecl( $1, 0 );
2283                }
2284        | no_attr_identifier_or_type_name '(' type_parameter_list ')'
2285                {
2286                        typedefTable.addToEnclosingScope( *$1, TYPEGENname, "11" );
2287                        $$ = DeclarationNode::newTypeDecl( $1, $3 );
2288                }
2289        ;
2290
2291trait_specifier:                                                                                // CFA
2292        TRAIT no_attr_identifier_or_type_name '(' type_parameter_list ')' '{' '}'
2293                { $$ = DeclarationNode::newTrait( $2, $4, 0 ); }
2294        | TRAIT no_attr_identifier_or_type_name '(' type_parameter_list ')' '{' push trait_declaration_list pop '}'
2295                { $$ = DeclarationNode::newTrait( $2, $4, $8 ); }
2296        ;
2297
2298trait_declaration_list:                                                                 // CFA
2299        trait_declaration
2300        | trait_declaration_list pop push trait_declaration
2301                { $$ = $1->appendList( $4 ); }
2302        ;
2303
2304trait_declaration:                                                                              // CFA
2305        cfa_trait_declaring_list ';'
2306        | trait_declaring_list ';'
2307        ;
2308
2309cfa_trait_declaring_list:                                                               // CFA
2310        cfa_variable_specifier
2311        | cfa_function_specifier
2312        | cfa_trait_declaring_list pop ',' push identifier_or_type_name
2313                { $$ = $1->appendList( $1->cloneType( $5 ) ); }
2314        ;
2315
2316trait_declaring_list:                                                                   // CFA
2317        type_specifier declarator
2318                { $$ = $2->addType( $1 ); }
2319        | trait_declaring_list pop ',' push declarator
2320                { $$ = $1->appendList( $1->cloneBaseType( $5 ) ); }
2321        ;
2322
2323//***************************** EXTERNAL DEFINITIONS *****************************
2324
2325translation_unit:
2326        // empty, input file
2327        | external_definition_list
2328                { parseTree = parseTree ? parseTree->appendList( $1 ) : $1;     }
2329        ;
2330
2331external_definition_list:
2332        push external_definition pop
2333                { $$ = $2; }
2334        | external_definition_list
2335                { forall = xxx; }
2336          push external_definition pop
2337                { $$ = $1 ? $1->appendList( $4 ) : $4; }
2338        ;
2339
2340external_definition_list_opt:
2341        // empty
2342                { $$ = nullptr; }
2343        | external_definition_list
2344        ;
2345
2346up:
2347                { typedefTable.up(); }
2348        ;
2349
2350down:
2351                { typedefTable.down(); }
2352        ;
2353
2354external_definition:
2355        declaration
2356        | external_function_definition
2357        | EXTENSION external_definition                                         // GCC, multiple __extension__ allowed, meaning unknown
2358                {
2359                        distExt( $2 );                                                          // mark all fields in list
2360                        $$ = $2;
2361                }
2362        | ASM '(' string_literal ')' ';'                                        // GCC, global assembler statement
2363                {
2364                        $$ = DeclarationNode::newAsmStmt( new StatementNode( build_asm( false, $3, 0 ) ) );
2365                }
2366        | EXTERN STRINGliteral                                                          // C++-style linkage specifier
2367                {
2368                        linkageStack.push( linkage );                           // handle nested extern "C"/"Cforall"
2369                        linkage = LinkageSpec::linkageUpdate( yylloc, linkage, $2 );
2370                }
2371          '{' up external_definition_list_opt down '}'
2372                {
2373                        linkage = linkageStack.top();
2374                        linkageStack.pop();
2375                        $$ = $6;
2376                }
2377        | type_qualifier_list
2378                {
2379                        if ( $1->type->qualifiers.val ) { SemanticError( yylloc, "CV qualifiers cannot be distributed; only storage-class and forall qualifiers." ); }
2380                        if ( $1->type->forall ) xxx = forall = true; // remember generic type
2381                }
2382          '{' up external_definition_list_opt down '}'          // CFA, namespace
2383                {
2384                        for ( DeclarationNode * iter = $5; iter != nullptr; iter = (DeclarationNode *)iter->get_next() ) {
2385                                if ( isMangled( iter->linkage ) ) {             // ignore extern "C"
2386                                        iter->addQualifiers( $1->clone() );
2387                                } // if
2388                        } // for
2389                        xxx = false;
2390                        delete $1;
2391                        $$ = $5;
2392                }
2393        | declaration_qualifier_list
2394                {
2395                        if ( $1->type->qualifiers.val ) { SemanticError( yylloc, "CV qualifiers cannot be distributed; only storage-class and forall qualifiers." ); }
2396                        if ( $1->type->forall ) xxx = forall = true; // remember generic type
2397                }
2398          '{' up external_definition_list_opt down '}'          // CFA, namespace
2399                {
2400                        for ( DeclarationNode * iter = $5; iter != nullptr; iter = (DeclarationNode *)iter->get_next() ) {
2401                                if ( isMangled( iter->linkage ) ) {             // ignore extern "C"
2402                                        iter->addQualifiers( $1->clone() );
2403                                } // if
2404                        } // for
2405                        xxx = false;
2406                        delete $1;
2407                        $$ = $5;
2408                }
2409        | declaration_qualifier_list type_qualifier_list
2410                {
2411                        if ( ($1->type && $1->type->qualifiers.val) || $2->type->qualifiers.val ) { SemanticError( yylloc, "CV qualifiers cannot be distributed; only storage-class and forall qualifiers." ); }
2412                        if ( ($1->type && $1->type->forall) || $2->type->forall ) xxx = forall = true; // remember generic type
2413                }
2414          '{' up external_definition_list_opt down '}'          // CFA, namespace
2415                {
2416                        for ( DeclarationNode * iter = $6; iter != nullptr; iter = (DeclarationNode *)iter->get_next() ) {
2417                                if ( isMangled( iter->linkage ) && isMangled( $2->linkage ) ) { // ignore extern "C"
2418                                        iter->addQualifiers( $1->clone() );
2419                                        iter->addQualifiers( $2->clone() );
2420                                } // if
2421                        } // for
2422                        xxx = false;
2423                        delete $1;
2424                        delete $2;
2425                        $$ = $6;
2426                }
2427        ;
2428
2429external_function_definition:
2430        function_definition
2431                // These rules are a concession to the "implicit int" type_specifier because there is a significant amount of
2432                // legacy code with global functions missing the type-specifier for the return type, and assuming "int".
2433                // Parsing is possible because function_definition does not appear in the context of an expression (nested
2434                // functions preclude this concession, i.e., all nested function must have a return type). A function prototype
2435                // declaration must still have a type_specifier.  OBSOLESCENT (see 1)
2436        | function_declarator compound_statement
2437                { $$ = $1->addFunctionBody( $2 ); }
2438        | KR_function_declarator KR_parameter_list_opt compound_statement
2439                { $$ = $1->addOldDeclList( $2 )->addFunctionBody( $3 ); }
2440        ;
2441
2442with_clause_opt:
2443        // empty
2444                { $$ = nullptr; forall = false; }
2445        | WITH '(' tuple_expression_list ')'
2446                { $$ = $3; forall = false; }
2447        ;
2448
2449function_definition:
2450        cfa_function_declaration with_clause_opt compound_statement     // CFA
2451                {
2452                        // Add the function body to the last identifier in the function definition list, i.e., foo3:
2453                        //   [const double] foo1(), foo2( int ), foo3( double ) { return 3.0; }
2454                        $1->get_last()->addFunctionBody( $3, $2 );
2455                        $$ = $1;
2456                }
2457        | declaration_specifier function_declarator with_clause_opt compound_statement
2458                {
2459                        rebindForall( $1, $2 );
2460                        $$ = $2->addFunctionBody( $4, $3 )->addType( $1 );
2461                }
2462        | declaration_specifier variable_type_redeclarator with_clause_opt compound_statement
2463                {
2464                        rebindForall( $1, $2 );
2465                        $$ = $2->addFunctionBody( $4, $3 )->addType( $1 );
2466                }
2467                // handles default int return type, OBSOLESCENT (see 1)
2468        | type_qualifier_list function_declarator with_clause_opt compound_statement
2469                { $$ = $2->addFunctionBody( $4, $3 )->addQualifiers( $1 ); }
2470                // handles default int return type, OBSOLESCENT (see 1)
2471        | declaration_qualifier_list function_declarator with_clause_opt compound_statement
2472                { $$ = $2->addFunctionBody( $4, $3 )->addQualifiers( $1 ); }
2473                // handles default int return type, OBSOLESCENT (see 1)
2474        | declaration_qualifier_list type_qualifier_list function_declarator with_clause_opt compound_statement
2475                { $$ = $3->addFunctionBody( $5, $4 )->addQualifiers( $2 )->addQualifiers( $1 ); }
2476
2477                // Old-style K&R function definition, OBSOLESCENT (see 4)
2478        | declaration_specifier KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
2479                {
2480                        rebindForall( $1, $2 );
2481                        $$ = $2->addOldDeclList( $3 )->addFunctionBody( $5, $4 )->addType( $1 );
2482                }
2483                // handles default int return type, OBSOLESCENT (see 1)
2484        | type_qualifier_list KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
2485                { $$ = $2->addOldDeclList( $3 )->addFunctionBody( $5, $4 )->addQualifiers( $1 ); }
2486                // handles default int return type, OBSOLESCENT (see 1)
2487        | declaration_qualifier_list KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
2488                { $$ = $2->addOldDeclList( $3 )->addFunctionBody( $5, $4 )->addQualifiers( $1 ); }
2489                // handles default int return type, OBSOLESCENT (see 1)
2490        | declaration_qualifier_list type_qualifier_list KR_function_declarator KR_parameter_list_opt with_clause_opt compound_statement
2491                { $$ = $3->addOldDeclList( $4 )->addFunctionBody( $6, $5 )->addQualifiers( $2 )->addQualifiers( $1 ); }
2492        ;
2493
2494declarator:
2495        variable_declarator
2496        | variable_type_redeclarator
2497        | function_declarator
2498        ;
2499
2500subrange:
2501        constant_expression '~' constant_expression                     // CFA, integer subrange
2502                { $$ = new ExpressionNode( new RangeExpr( maybeMoveBuild< Expression >( $1 ), maybeMoveBuild< Expression >( $3 ) ) ); }
2503        ;
2504
2505asm_name_opt:                                                                                   // GCC
2506        // empty
2507                { $$ = nullptr; }
2508        | ASM '(' string_literal ')' attribute_list_opt
2509                {
2510                        DeclarationNode * name = new DeclarationNode();
2511                        name->asmName = $3;
2512                        $$ = name->addQualifiers( $5 );
2513                }
2514        ;
2515
2516attribute_list_opt:                                                                             // GCC
2517        // empty
2518                { $$ = nullptr; }
2519        | attribute_list
2520        ;
2521
2522attribute_list:                                                                                 // GCC
2523        attribute
2524        | attribute_list attribute
2525                { $$ = $2->addQualifiers( $1 ); }
2526        ;
2527
2528attribute:                                                                                              // GCC
2529        ATTRIBUTE '(' '(' attribute_name_list ')' ')'
2530                { $$ = $4; }
2531        ;
2532
2533attribute_name_list:                                                                    // GCC
2534        attribute_name
2535        | attribute_name_list ',' attribute_name
2536                { $$ = $3->addQualifiers( $1 ); }
2537        ;
2538
2539attribute_name:                                                                                 // GCC
2540        // empty
2541                { $$ = nullptr; }
2542        | attr_name
2543                { $$ = DeclarationNode::newAttribute( $1 ); }
2544        | attr_name '(' argument_expression_list ')'
2545                { $$ = DeclarationNode::newAttribute( $1, $3 ); }
2546        ;
2547
2548attr_name:                                                                                              // GCC
2549        IDENTIFIER
2550        | quasi_keyword
2551        | TYPEDEFname
2552        | TYPEGENname
2553        | FALLTHROUGH
2554                { $$ = Token{ new string( "fallthrough" ), { nullptr, -1 } }; }
2555        | CONST
2556                { $$ = Token{ new string( "__const__" ), { nullptr, -1 } }; }
2557        ;
2558
2559// ============================================================================
2560// The following sections are a series of grammar patterns used to parse declarators. Multiple patterns are necessary
2561// because the type of an identifier in wrapped around the identifier in the same form as its usage in an expression, as
2562// in:
2563//
2564//              int (*f())[10] { ... };
2565//              ... (*f())[3] += 1;             // definition mimics usage
2566//
2567// Because these patterns are highly recursive, changes at a lower level in the recursion require copying some or all of
2568// the pattern. Each of these patterns has some subtle variation to ensure correct syntax in a particular context.
2569// ============================================================================
2570
2571// ----------------------------------------------------------------------------
2572// The set of valid declarators before a compound statement for defining a function is less than the set of declarators
2573// to define a variable or function prototype, e.g.:
2574//
2575//              valid declaration               invalid definition
2576//              -----------------               ------------------
2577//              int f;                                  int f {}
2578//              int *f;                                 int *f {}
2579//              int f[10];                              int f[10] {}
2580//              int (*f)(int);                  int (*f)(int) {}
2581//
2582// To preclude this syntactic anomaly requires separating the grammar rules for variable and function declarators, hence
2583// variable_declarator and function_declarator.
2584// ----------------------------------------------------------------------------
2585
2586// This pattern parses a declaration of a variable that is not redefining a typedef name. The pattern precludes
2587// declaring an array of functions versus a pointer to an array of functions.
2588
2589variable_declarator:
2590        paren_identifier attribute_list_opt
2591                { $$ = $1->addQualifiers( $2 ); }
2592        | variable_ptr
2593        | variable_array attribute_list_opt
2594                { $$ = $1->addQualifiers( $2 ); }
2595        | variable_function attribute_list_opt
2596                { $$ = $1->addQualifiers( $2 ); }
2597        ;
2598
2599paren_identifier:
2600        identifier
2601                { $$ = DeclarationNode::newName( $1 ); }
2602        | '(' paren_identifier ')'                                                      // redundant parenthesis
2603                { $$ = $2; }
2604        ;
2605
2606variable_ptr:
2607        ptrref_operator variable_declarator
2608                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2609        | ptrref_operator type_qualifier_list variable_declarator
2610                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2611        | '(' variable_ptr ')' attribute_list_opt
2612                { $$ = $2->addQualifiers( $4 ); }                               // redundant parenthesis
2613        ;
2614
2615variable_array:
2616        paren_identifier array_dimension
2617                { $$ = $1->addArray( $2 ); }
2618        | '(' variable_ptr ')' array_dimension
2619                { $$ = $2->addArray( $4 ); }
2620        | '(' variable_array ')' multi_array_dimension          // redundant parenthesis
2621                { $$ = $2->addArray( $4 ); }
2622        | '(' variable_array ')'                                                        // redundant parenthesis
2623                { $$ = $2; }
2624        ;
2625
2626variable_function:
2627        '(' variable_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2628                { $$ = $2->addParamList( $6 ); }
2629        | '(' variable_function ')'                                                     // redundant parenthesis
2630                { $$ = $2; }
2631        ;
2632
2633// This pattern parses a function declarator that is not redefining a typedef name. For non-nested functions, there is
2634// no context where a function definition can redefine a typedef name, i.e., the typedef and function name cannot exist
2635// is the same scope.  The pattern precludes returning arrays and functions versus pointers to arrays and functions.
2636
2637function_declarator:
2638        function_no_ptr attribute_list_opt
2639                { $$ = $1->addQualifiers( $2 ); }
2640        | function_ptr
2641        | function_array attribute_list_opt
2642                { $$ = $1->addQualifiers( $2 ); }
2643        ;
2644
2645function_no_ptr:
2646        paren_identifier '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2647                { $$ = $1->addParamList( $4 ); }
2648        | '(' function_ptr ')' '(' push parameter_type_list_opt pop ')'
2649                { $$ = $2->addParamList( $6 ); }
2650        | '(' function_no_ptr ')'                                                       // redundant parenthesis
2651                { $$ = $2; }
2652        ;
2653
2654function_ptr:
2655        ptrref_operator function_declarator
2656                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2657        | ptrref_operator type_qualifier_list function_declarator
2658                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2659        | '(' function_ptr ')'
2660                { $$ = $2; }
2661        ;
2662
2663function_array:
2664        '(' function_ptr ')' array_dimension
2665                { $$ = $2->addArray( $4 ); }
2666        | '(' function_array ')' multi_array_dimension          // redundant parenthesis
2667                { $$ = $2->addArray( $4 ); }
2668        | '(' function_array ')'                                                        // redundant parenthesis
2669                { $$ = $2; }
2670        ;
2671
2672// This pattern parses an old-style K&R function declarator (OBSOLESCENT, see 4)
2673//
2674//   f( a, b, c ) int a, *b, c[]; {}
2675//
2676// that is not redefining a typedef name (see function_declarator for additional comments). The pattern precludes
2677// returning arrays and functions versus pointers to arrays and functions.
2678
2679KR_function_declarator:
2680        KR_function_no_ptr
2681        | KR_function_ptr
2682        | KR_function_array
2683        ;
2684
2685KR_function_no_ptr:
2686        paren_identifier '(' identifier_list ')'                        // function_declarator handles empty parameter
2687                { $$ = $1->addIdList( $3 ); }
2688        | '(' KR_function_ptr ')' '(' push parameter_type_list_opt pop ')'
2689                { $$ = $2->addParamList( $6 ); }
2690        | '(' KR_function_no_ptr ')'                                            // redundant parenthesis
2691                { $$ = $2; }
2692        ;
2693
2694KR_function_ptr:
2695        ptrref_operator KR_function_declarator
2696                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2697        | ptrref_operator type_qualifier_list KR_function_declarator
2698                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2699        | '(' KR_function_ptr ')'
2700                { $$ = $2; }
2701        ;
2702
2703KR_function_array:
2704        '(' KR_function_ptr ')' array_dimension
2705                { $$ = $2->addArray( $4 ); }
2706        | '(' KR_function_array ')' multi_array_dimension       // redundant parenthesis
2707                { $$ = $2->addArray( $4 ); }
2708        | '(' KR_function_array ')'                                                     // redundant parenthesis
2709                { $$ = $2; }
2710        ;
2711
2712// This pattern parses a declaration for a variable or function prototype that redefines a type name, e.g.:
2713//
2714//              typedef int foo;
2715//              {
2716//                 int foo; // redefine typedef name in new scope
2717//              }
2718//
2719// The pattern precludes declaring an array of functions versus a pointer to an array of functions, and returning arrays
2720// and functions versus pointers to arrays and functions.
2721
2722variable_type_redeclarator:
2723        paren_type attribute_list_opt
2724                { $$ = $1->addQualifiers( $2 ); }
2725        | type_ptr
2726        | type_array attribute_list_opt
2727                { $$ = $1->addQualifiers( $2 ); }
2728        | type_function attribute_list_opt
2729                { $$ = $1->addQualifiers( $2 ); }
2730        ;
2731
2732paren_type:
2733        typedef
2734                // hide type name in enclosing scope by variable name
2735                { typedefTable.addToEnclosingScope( *$1->name, IDENTIFIER, "ID" ); }
2736        | '(' paren_type ')'
2737                { $$ = $2; }
2738        ;
2739
2740type_ptr:
2741        ptrref_operator variable_type_redeclarator
2742                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2743        | ptrref_operator type_qualifier_list variable_type_redeclarator
2744                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2745        | '(' type_ptr ')' attribute_list_opt
2746                { $$ = $2->addQualifiers( $4 ); }
2747        ;
2748
2749type_array:
2750        paren_type array_dimension
2751                { $$ = $1->addArray( $2 ); }
2752        | '(' type_ptr ')' array_dimension
2753                { $$ = $2->addArray( $4 ); }
2754        | '(' type_array ')' multi_array_dimension                      // redundant parenthesis
2755                { $$ = $2->addArray( $4 ); }
2756        | '(' type_array ')'                                                            // redundant parenthesis
2757                { $$ = $2; }
2758        ;
2759
2760type_function:
2761        paren_type '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2762                { $$ = $1->addParamList( $4 ); }
2763        | '(' type_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2764                { $$ = $2->addParamList( $6 ); }
2765        | '(' type_function ')'                                                         // redundant parenthesis
2766                { $$ = $2; }
2767        ;
2768
2769// This pattern parses a declaration for a parameter variable of a function prototype or actual that is not redefining a
2770// typedef name and allows the C99 array options, which can only appear in a parameter list.  The pattern precludes
2771// declaring an array of functions versus a pointer to an array of functions, and returning arrays and functions versus
2772// pointers to arrays and functions.
2773
2774identifier_parameter_declarator:
2775        paren_identifier attribute_list_opt
2776                { $$ = $1->addQualifiers( $2 ); }
2777        | '&' MUTEX paren_identifier attribute_list_opt
2778                { $$ = $3->addPointer( DeclarationNode::newPointer( DeclarationNode::newTypeQualifier( Type::Mutex ), OperKinds::AddressOf ) )->addQualifiers( $4 ); }
2779        | identifier_parameter_ptr
2780        | identifier_parameter_array attribute_list_opt
2781                { $$ = $1->addQualifiers( $2 ); }
2782        | identifier_parameter_function attribute_list_opt
2783                { $$ = $1->addQualifiers( $2 ); }
2784        ;
2785
2786identifier_parameter_ptr:
2787        ptrref_operator identifier_parameter_declarator
2788                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2789        | ptrref_operator type_qualifier_list identifier_parameter_declarator
2790                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2791        | '(' identifier_parameter_ptr ')' attribute_list_opt
2792                { $$ = $2->addQualifiers( $4 ); }
2793        ;
2794
2795identifier_parameter_array:
2796        paren_identifier array_parameter_dimension
2797                { $$ = $1->addArray( $2 ); }
2798        | '(' identifier_parameter_ptr ')' array_dimension
2799                { $$ = $2->addArray( $4 ); }
2800        | '(' identifier_parameter_array ')' multi_array_dimension // redundant parenthesis
2801                { $$ = $2->addArray( $4 ); }
2802        | '(' identifier_parameter_array ')'                            // redundant parenthesis
2803                { $$ = $2; }
2804        ;
2805
2806identifier_parameter_function:
2807        paren_identifier '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2808                { $$ = $1->addParamList( $4 ); }
2809        | '(' identifier_parameter_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2810                { $$ = $2->addParamList( $6 ); }
2811        | '(' identifier_parameter_function ')'                         // redundant parenthesis
2812                { $$ = $2; }
2813        ;
2814
2815// This pattern parses a declaration for a parameter variable or function prototype that is redefining a typedef name,
2816// e.g.:
2817//
2818//              typedef int foo;
2819//              forall( otype T ) struct foo;
2820//              int f( int foo ); // redefine typedef name in new scope
2821//
2822// and allows the C99 array options, which can only appear in a parameter list.
2823
2824type_parameter_redeclarator:
2825        typedef attribute_list_opt
2826                { $$ = $1->addQualifiers( $2 ); }
2827        | '&' MUTEX typedef attribute_list_opt
2828                { $$ = $3->addPointer( DeclarationNode::newPointer( DeclarationNode::newTypeQualifier( Type::Mutex ), OperKinds::AddressOf ) )->addQualifiers( $4 ); }
2829        | type_parameter_ptr
2830        | type_parameter_array attribute_list_opt
2831                { $$ = $1->addQualifiers( $2 ); }
2832        | type_parameter_function attribute_list_opt
2833                { $$ = $1->addQualifiers( $2 ); }
2834        ;
2835
2836typedef:
2837        TYPEDEFname
2838                { $$ = DeclarationNode::newName( $1 ); }
2839        | TYPEGENname
2840                { $$ = DeclarationNode::newName( $1 ); }
2841        ;
2842
2843type_parameter_ptr:
2844        ptrref_operator type_parameter_redeclarator
2845                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2846        | ptrref_operator type_qualifier_list type_parameter_redeclarator
2847                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2848        | '(' type_parameter_ptr ')' attribute_list_opt
2849                { $$ = $2->addQualifiers( $4 ); }
2850        ;
2851
2852type_parameter_array:
2853        typedef array_parameter_dimension
2854                { $$ = $1->addArray( $2 ); }
2855        | '(' type_parameter_ptr ')' array_parameter_dimension
2856                { $$ = $2->addArray( $4 ); }
2857        ;
2858
2859type_parameter_function:
2860        typedef '(' push parameter_type_list_opt pop ')'        // empty parameter list OBSOLESCENT (see 3)
2861                { $$ = $1->addParamList( $4 ); }
2862        | '(' type_parameter_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2863                { $$ = $2->addParamList( $6 ); }
2864        ;
2865
2866// This pattern parses a declaration of an abstract variable or function prototype, i.e., there is no identifier to
2867// which the type applies, e.g.:
2868//
2869//              sizeof( int );
2870//              sizeof( int * );
2871//              sizeof( int [10] );
2872//              sizeof( int (*)() );
2873//              sizeof( int () );
2874//
2875// The pattern precludes declaring an array of functions versus a pointer to an array of functions, and returning arrays
2876// and functions versus pointers to arrays and functions.
2877
2878abstract_declarator:
2879        abstract_ptr
2880        | abstract_array attribute_list_opt
2881                { $$ = $1->addQualifiers( $2 ); }
2882        | abstract_function attribute_list_opt
2883                { $$ = $1->addQualifiers( $2 ); }
2884        ;
2885
2886abstract_ptr:
2887        ptrref_operator
2888                { $$ = DeclarationNode::newPointer( 0, $1 ); }
2889        | ptrref_operator type_qualifier_list
2890                { $$ = DeclarationNode::newPointer( $2, $1 ); }
2891        | ptrref_operator abstract_declarator
2892                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
2893        | ptrref_operator type_qualifier_list abstract_declarator
2894                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2895        | '(' abstract_ptr ')' attribute_list_opt
2896                { $$ = $2->addQualifiers( $4 ); }
2897        ;
2898
2899abstract_array:
2900        array_dimension
2901        | '(' abstract_ptr ')' array_dimension
2902                { $$ = $2->addArray( $4 ); }
2903        | '(' abstract_array ')' multi_array_dimension          // redundant parenthesis
2904                { $$ = $2->addArray( $4 ); }
2905        | '(' abstract_array ')'                                                        // redundant parenthesis
2906                { $$ = $2; }
2907        ;
2908
2909abstract_function:
2910        '(' push parameter_type_list_opt pop ')'                        // empty parameter list OBSOLESCENT (see 3)
2911                { $$ = DeclarationNode::newFunction( nullptr, nullptr, $3, nullptr ); }
2912        | '(' abstract_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
2913                { $$ = $2->addParamList( $6 ); }
2914        | '(' abstract_function ')'                                                     // redundant parenthesis
2915                { $$ = $2; }
2916        ;
2917
2918array_dimension:
2919                // Only the first dimension can be empty.
2920        '[' ']'
2921                { $$ = DeclarationNode::newArray( 0, 0, false ); }
2922        | '[' ']' multi_array_dimension
2923                { $$ = DeclarationNode::newArray( 0, 0, false )->addArray( $3 ); }
2924        | multi_array_dimension
2925        ;
2926
2927multi_array_dimension:
2928        '[' push assignment_expression pop ']'
2929                { $$ = DeclarationNode::newArray( $3, 0, false ); }
2930        | '[' push '*' pop ']'                                                          // C99
2931                { $$ = DeclarationNode::newVarArray( 0 ); }
2932        | multi_array_dimension '[' push assignment_expression pop ']'
2933                { $$ = $1->addArray( DeclarationNode::newArray( $4, 0, false ) ); }
2934        | multi_array_dimension '[' push '*' pop ']'            // C99
2935                { $$ = $1->addArray( DeclarationNode::newVarArray( 0 ) ); }
2936        ;
2937
2938// This pattern parses a declaration of a parameter abstract variable or function prototype, i.e., there is no
2939// identifier to which the type applies, e.g.:
2940//
2941//              int f( int );                   // not handled here
2942//              int f( int * );                 // abstract function-prototype parameter; no parameter name specified
2943//              int f( int (*)() );             // abstract function-prototype parameter; no parameter name specified
2944//              int f( int (int) );             // abstract function-prototype parameter; no parameter name specified
2945//
2946// The pattern precludes declaring an array of functions versus a pointer to an array of functions, and returning arrays
2947// and functions versus pointers to arrays and functions. In addition, the pattern handles the
2948// special meaning of parenthesis around a typedef name:
2949//
2950//              ISO/IEC 9899:1999 Section 6.7.5.3(11) : "In a parameter declaration, a single typedef name in
2951//              parentheses is taken to be an abstract declarator that specifies a function with a single parameter,
2952//              not as redundant parentheses around the identifier."
2953//
2954// For example:
2955//
2956//              typedef float T;
2957//              int f( int ( T [5] ) );                                 // see abstract_parameter_declarator
2958//              int g( int ( T ( int ) ) );                             // see abstract_parameter_declarator
2959//              int f( int f1( T a[5] ) );                              // see identifier_parameter_declarator
2960//              int g( int g1( T g2( int p ) ) );               // see identifier_parameter_declarator
2961//
2962// In essence, a '(' immediately to the left of typedef name, T, is interpreted as starting a parameter type list, and
2963// not as redundant parentheses around a redeclaration of T. Finally, the pattern also precludes declaring an array of
2964// functions versus a pointer to an array of functions, and returning arrays and functions versus pointers to arrays and
2965// functions.
2966
2967abstract_parameter_declarator:
2968        abstract_parameter_ptr
2969        | '&' MUTEX attribute_list_opt
2970                { $$ = DeclarationNode::newPointer( DeclarationNode::newTypeQualifier( Type::Mutex ), OperKinds::AddressOf )->addQualifiers( $3 ); }
2971        | abstract_parameter_array attribute_list_opt
2972                { $$ = $1->addQualifiers( $2 ); }
2973        | abstract_parameter_function attribute_list_opt
2974                { $$ = $1->addQualifiers( $2 ); }
2975        ;
2976
2977abstract_parameter_ptr:
2978        ptrref_operator
2979                { $$ = DeclarationNode::newPointer( nullptr, $1 ); }
2980        | ptrref_operator type_qualifier_list
2981                { $$ = DeclarationNode::newPointer( $2, $1 ); }
2982        | ptrref_operator abstract_parameter_declarator
2983                { $$ = $2->addPointer( DeclarationNode::newPointer( nullptr, $1 ) ); }
2984        | ptrref_operator type_qualifier_list abstract_parameter_declarator
2985                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
2986        | '(' abstract_parameter_ptr ')' attribute_list_opt
2987                { $$ = $2->addQualifiers( $4 ); }
2988        ;
2989
2990abstract_parameter_array:
2991        array_parameter_dimension
2992        | '(' abstract_parameter_ptr ')' array_parameter_dimension
2993                { $$ = $2->addArray( $4 ); }
2994        | '(' abstract_parameter_array ')' multi_array_dimension // redundant parenthesis
2995                { $$ = $2->addArray( $4 ); }
2996        | '(' abstract_parameter_array ')'                                      // redundant parenthesis
2997                { $$ = $2; }
2998        ;
2999
3000abstract_parameter_function:
3001        '(' push parameter_type_list_opt pop ')'                        // empty parameter list OBSOLESCENT (see 3)
3002                { $$ = DeclarationNode::newFunction( nullptr, nullptr, $3, nullptr ); }
3003        | '(' abstract_parameter_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
3004                { $$ = $2->addParamList( $6 ); }
3005        | '(' abstract_parameter_function ')'                           // redundant parenthesis
3006                { $$ = $2; }
3007        ;
3008
3009array_parameter_dimension:
3010                // Only the first dimension can be empty or have qualifiers.
3011        array_parameter_1st_dimension
3012        | array_parameter_1st_dimension multi_array_dimension
3013                { $$ = $1->addArray( $2 ); }
3014        | multi_array_dimension
3015        ;
3016
3017// The declaration of an array parameter has additional syntax over arrays in normal variable declarations:
3018//
3019//              ISO/IEC 9899:1999 Section 6.7.5.2(1) : "The optional type qualifiers and the keyword static shall appear only in
3020//              a declaration of a function parameter with an array type, and then only in the outermost array type derivation."
3021
3022array_parameter_1st_dimension:
3023        '[' ']'
3024                { $$ = DeclarationNode::newArray( 0, 0, false ); }
3025                // multi_array_dimension handles the '[' '*' ']' case
3026        | '[' push type_qualifier_list '*' pop ']'                      // remaining C99
3027                { $$ = DeclarationNode::newVarArray( $3 ); }
3028        | '[' push type_qualifier_list pop ']'
3029                { $$ = DeclarationNode::newArray( 0, $3, false ); }
3030                // multi_array_dimension handles the '[' assignment_expression ']' case
3031        | '[' push type_qualifier_list assignment_expression pop ']'
3032                { $$ = DeclarationNode::newArray( $4, $3, false ); }
3033        | '[' push STATIC type_qualifier_list_opt assignment_expression pop ']'
3034                { $$ = DeclarationNode::newArray( $5, $4, true ); }
3035        | '[' push type_qualifier_list STATIC assignment_expression pop ']'
3036                { $$ = DeclarationNode::newArray( $5, $3, true ); }
3037        ;
3038
3039// This pattern parses a declaration of an abstract variable, but does not allow "int ()" for a function pointer.
3040//
3041//              struct S {
3042//          int;
3043//          int *;
3044//          int [10];
3045//          int (*)();
3046//      };
3047
3048variable_abstract_declarator:
3049        variable_abstract_ptr
3050        | variable_abstract_array attribute_list_opt
3051                { $$ = $1->addQualifiers( $2 ); }
3052        | variable_abstract_function attribute_list_opt
3053                { $$ = $1->addQualifiers( $2 ); }
3054        ;
3055
3056variable_abstract_ptr:
3057        ptrref_operator
3058                { $$ = DeclarationNode::newPointer( 0, $1 ); }
3059        | ptrref_operator type_qualifier_list
3060                { $$ = DeclarationNode::newPointer( $2, $1 ); }
3061        | ptrref_operator variable_abstract_declarator
3062                { $$ = $2->addPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3063        | ptrref_operator type_qualifier_list variable_abstract_declarator
3064                { $$ = $3->addPointer( DeclarationNode::newPointer( $2, $1 ) ); }
3065        | '(' variable_abstract_ptr ')' attribute_list_opt
3066                { $$ = $2->addQualifiers( $4 ); }
3067        ;
3068
3069variable_abstract_array:
3070        array_dimension
3071        | '(' variable_abstract_ptr ')' array_dimension
3072                { $$ = $2->addArray( $4 ); }
3073        | '(' variable_abstract_array ')' multi_array_dimension // redundant parenthesis
3074                { $$ = $2->addArray( $4 ); }
3075        | '(' variable_abstract_array ')'                                       // redundant parenthesis
3076                { $$ = $2; }
3077        ;
3078
3079variable_abstract_function:
3080        '(' variable_abstract_ptr ')' '(' push parameter_type_list_opt pop ')' // empty parameter list OBSOLESCENT (see 3)
3081                { $$ = $2->addParamList( $6 ); }
3082        | '(' variable_abstract_function ')'                            // redundant parenthesis
3083                { $$ = $2; }
3084        ;
3085
3086// This pattern parses a new-style declaration for a parameter variable or function prototype that is either an
3087// identifier or typedef name and allows the C99 array options, which can only appear in a parameter list.
3088
3089cfa_identifier_parameter_declarator_tuple:                              // CFA
3090        cfa_identifier_parameter_declarator_no_tuple
3091        | cfa_abstract_tuple
3092        | type_qualifier_list cfa_abstract_tuple
3093                { $$ = $2->addQualifiers( $1 ); }
3094        ;
3095
3096cfa_identifier_parameter_declarator_no_tuple:                   // CFA
3097        cfa_identifier_parameter_ptr
3098        | cfa_identifier_parameter_array
3099        ;
3100
3101cfa_identifier_parameter_ptr:                                                   // CFA
3102                // No SUE declaration in parameter list.
3103        ptrref_operator type_specifier_nobody
3104                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3105        | type_qualifier_list ptrref_operator type_specifier_nobody
3106                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3107        | ptrref_operator cfa_abstract_function
3108                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3109        | type_qualifier_list ptrref_operator cfa_abstract_function
3110                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3111        | ptrref_operator cfa_identifier_parameter_declarator_tuple
3112                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3113        | type_qualifier_list ptrref_operator cfa_identifier_parameter_declarator_tuple
3114                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3115        ;
3116
3117cfa_identifier_parameter_array:                                                 // CFA
3118                // Only the first dimension can be empty or have qualifiers. Empty dimension must be factored out due to
3119                // shift/reduce conflict with new-style empty (void) function return type.
3120        '[' ']' type_specifier_nobody
3121                { $$ = $3->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
3122        | cfa_array_parameter_1st_dimension type_specifier_nobody
3123                { $$ = $2->addNewArray( $1 ); }
3124        | '[' ']' multi_array_dimension type_specifier_nobody
3125                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
3126        | cfa_array_parameter_1st_dimension multi_array_dimension type_specifier_nobody
3127                { $$ = $3->addNewArray( $2 )->addNewArray( $1 ); }
3128        | multi_array_dimension type_specifier_nobody
3129                { $$ = $2->addNewArray( $1 ); }
3130
3131        | '[' ']' cfa_identifier_parameter_ptr
3132                { $$ = $3->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
3133        | cfa_array_parameter_1st_dimension cfa_identifier_parameter_ptr
3134                { $$ = $2->addNewArray( $1 ); }
3135        | '[' ']' multi_array_dimension cfa_identifier_parameter_ptr
3136                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( 0, 0, false ) ); }
3137        | cfa_array_parameter_1st_dimension multi_array_dimension cfa_identifier_parameter_ptr
3138                { $$ = $3->addNewArray( $2 )->addNewArray( $1 ); }
3139        | multi_array_dimension cfa_identifier_parameter_ptr
3140                { $$ = $2->addNewArray( $1 ); }
3141        ;
3142
3143cfa_array_parameter_1st_dimension:
3144        '[' push type_qualifier_list '*' pop ']'                        // remaining C99
3145                { $$ = DeclarationNode::newVarArray( $3 ); }
3146        | '[' push type_qualifier_list assignment_expression pop ']'
3147                { $$ = DeclarationNode::newArray( $4, $3, false ); }
3148        | '[' push declaration_qualifier_list assignment_expression pop ']'
3149                // declaration_qualifier_list must be used because of shift/reduce conflict with
3150                // assignment_expression, so a semantic check is necessary to preclude them as a type_qualifier cannot
3151                // appear in this context.
3152                { $$ = DeclarationNode::newArray( $4, $3, true ); }
3153        | '[' push declaration_qualifier_list type_qualifier_list assignment_expression pop ']'
3154                { $$ = DeclarationNode::newArray( $5, $4->addQualifiers( $3 ), true ); }
3155        ;
3156
3157// This pattern parses a new-style declaration of an abstract variable or function prototype, i.e., there is no
3158// identifier to which the type applies, e.g.:
3159//
3160//              [int] f( int );                         // abstract variable parameter; no parameter name specified
3161//              [int] f( [int] (int) );         // abstract function-prototype parameter; no parameter name specified
3162//
3163// These rules need LR(3):
3164//
3165//              cfa_abstract_tuple identifier_or_type_name
3166//              '[' cfa_parameter_list ']' identifier_or_type_name '(' cfa_parameter_ellipsis_list_opt ')'
3167//
3168// since a function return type can be syntactically identical to a tuple type:
3169//
3170//              [int, int] t;
3171//              [int, int] f( int );
3172//
3173// Therefore, it is necessary to look at the token after identifier_or_type_name to know when to reduce
3174// cfa_abstract_tuple. To make this LR(1), several rules have to be flattened (lengthened) to allow the necessary
3175// lookahead. To accomplish this, cfa_abstract_declarator has an entry point without tuple, and tuple declarations are
3176// duplicated when appearing with cfa_function_specifier.
3177
3178cfa_abstract_declarator_tuple:                                                  // CFA
3179        cfa_abstract_tuple
3180        | type_qualifier_list cfa_abstract_tuple
3181                { $$ = $2->addQualifiers( $1 ); }
3182        | cfa_abstract_declarator_no_tuple
3183        ;
3184
3185cfa_abstract_declarator_no_tuple:                                               // CFA
3186        cfa_abstract_ptr
3187        | cfa_abstract_array
3188        ;
3189
3190cfa_abstract_ptr:                                                                               // CFA
3191        ptrref_operator type_specifier
3192                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3193        | type_qualifier_list ptrref_operator type_specifier
3194                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3195        | ptrref_operator cfa_abstract_function
3196                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3197        | type_qualifier_list ptrref_operator cfa_abstract_function
3198                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3199        | ptrref_operator cfa_abstract_declarator_tuple
3200                { $$ = $2->addNewPointer( DeclarationNode::newPointer( 0, $1 ) ); }
3201        | type_qualifier_list ptrref_operator cfa_abstract_declarator_tuple
3202                { $$ = $3->addNewPointer( DeclarationNode::newPointer( $1, $2 ) ); }
3203        ;
3204
3205cfa_abstract_array:                                                                             // CFA
3206                // Only the first dimension can be empty. Empty dimension must be factored out due to shift/reduce conflict with
3207                // empty (void) function return type.
3208        '[' ']' type_specifier
3209                { $$ = $3->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
3210        | '[' ']' multi_array_dimension type_specifier
3211                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
3212        | multi_array_dimension type_specifier
3213                { $$ = $2->addNewArray( $1 ); }
3214        | '[' ']' cfa_abstract_ptr
3215                { $$ = $3->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
3216        | '[' ']' multi_array_dimension cfa_abstract_ptr
3217                { $$ = $4->addNewArray( $3 )->addNewArray( DeclarationNode::newArray( nullptr, nullptr, false ) ); }
3218        | multi_array_dimension cfa_abstract_ptr
3219                { $$ = $2->addNewArray( $1 ); }
3220        ;
3221
3222cfa_abstract_tuple:                                                                             // CFA
3223        '[' push cfa_abstract_parameter_list pop ']'
3224                { $$ = DeclarationNode::newTuple( $3 ); }
3225        | '[' push type_specifier_nobody ELLIPSIS pop ']'
3226                { SemanticError( yylloc, "Tuple array currently unimplemented." ); $$ = nullptr; }
3227        | '[' push type_specifier_nobody ELLIPSIS constant_expression pop ']'
3228                { SemanticError( yylloc, "Tuple array currently unimplemented." ); $$ = nullptr; }
3229        ;
3230
3231cfa_abstract_function:                                                                  // CFA
3232//      '[' ']' '(' cfa_parameter_ellipsis_list_opt ')'
3233//              { $$ = DeclarationNode::newFunction( nullptr, DeclarationNode::newTuple( nullptr ), $4, nullptr ); }
3234        cfa_abstract_tuple '(' push cfa_parameter_ellipsis_list_opt pop ')'
3235                { $$ = DeclarationNode::newFunction( nullptr, $1, $4, nullptr ); }
3236        | cfa_function_return '(' push cfa_parameter_ellipsis_list_opt pop ')'
3237                { $$ = DeclarationNode::newFunction( nullptr, $1, $4, nullptr ); }
3238        ;
3239
3240// 1) ISO/IEC 9899:1999 Section 6.7.2(2) : "At least one type specifier shall be given in the declaration specifiers in
3241//    each declaration, and in the specifier-qualifier list in each structure declaration and type name."
3242//
3243// 2) ISO/IEC 9899:1999 Section 6.11.5(1) : "The placement of a storage-class specifier other than at the beginning of
3244//    the declaration specifiers in a declaration is an obsolescent feature."
3245//
3246// 3) ISO/IEC 9899:1999 Section 6.11.6(1) : "The use of function declarators with empty parentheses (not
3247//    prototype-format parameter type declarators) is an obsolescent feature."
3248//
3249// 4) ISO/IEC 9899:1999 Section 6.11.7(1) : "The use of function definitions with separate parameter identifier and
3250//    declaration lists (not prototype-format parameter type and identifier declarators) is an obsolescent feature.
3251
3252//************************* MISCELLANEOUS ********************************
3253
3254comma_opt:                                                                                              // redundant comma
3255        // empty
3256        | ','
3257        ;
3258
3259default_initialize_opt:
3260        // empty
3261                { $$ = nullptr; }
3262        | '=' assignment_expression
3263                { $$ = $2; }
3264        ;
3265
3266%%
3267
3268// ----end of grammar----
3269
3270// Local Variables: //
3271// mode: c++ //
3272// tab-width: 4 //
3273// compile-command: "make install" //
3274// End: //
Note: See TracBrowser for help on using the repository browser.