source: libcfa/src/parseconfig.cfa @ 81e0c61

ADTast-experimentalenumforall-pointer-decayjacob/cs343-translationpthread-emulationqualifiedEnum
Last change on this file since 81e0c61 was 81e0c61, checked in by Jacob Prud'homme <jafprudhomme@…>, 3 years ago

Reverted to using English-speaking-order syntax

  • Property mode set to 100644
File size: 6.1 KB
Line 
1#include <fstream.hfa>
2#include <parseargs.hfa>
3#include <stdlib.hfa>
4#include <string.h>
5#include "parseconfig.hfa"
6
7
8// *********************************** exceptions ***********************************
9
10
11// TODO: Add names of missing config entries to exception (see further below)
12static vtable(Missing_Config_Entries) Missing_Config_Entries_vt;
13
14[ void ] ?{}( & Missing_Config_Entries this, unsigned int num_missing ) {
15        this.virtual_table = &Missing_Config_Entries_vt;
16        this.num_missing = num_missing;
17}
18
19// TODO: use string interface when it's ready (and implement exception msg protocol)
20[ void ] msg( * Missing_Config_Entries ex ) {
21        serr | nlOff;
22        serr | "The config file is missing " | ex->num_missing;
23        serr | nlOn;
24        if ( ex->num_missing == 1 ) {
25                serr | " entry.";
26        } else {
27                serr | " entries.";
28        }
29} // msg
30
31
32static vtable(Parse_Failure) Parse_Failure_vt;
33
34[ void ] ?{}( & Parse_Failure this, [] char failed_key, [] char failed_value ) {
35        this.virtual_table = &Parse_Failure_vt;
36
37        this.failed_key = alloc( strlen( failed_key ) );
38        this.failed_value = alloc( strlen( failed_value ) );
39        strcpy( this.failed_key, failed_key );
40        strcpy( this.failed_value, failed_value );
41}
42
43[ void ] ^?{}( & Parse_Failure this ) with ( this ) {
44        free( failed_key );
45        free( failed_value );
46}
47
48// TODO: use string interface when it's ready (and implement exception msg protocol)
49[ void ] msg( * Parse_Failure ex ) {
50        serr | "Config entry " | ex->failed_key | " could not be parsed. It has value " | ex->failed_value | ".";
51}
52
53
54static vtable(Validation_Failure) Validation_Failure_vt;
55
56[ void ] ?{}( & Validation_Failure this, [] char failed_key, [] char failed_value ) {
57        this.virtual_table = &Validation_Failure_vt;
58
59        this.failed_key = alloc( strlen( failed_key ) );
60        this.failed_value = alloc( strlen( failed_value ) );
61        strcpy( this.failed_key, failed_key );
62        strcpy( this.failed_value, failed_value );
63}
64
65[ void ] ^?{}( & Validation_Failure this ) with ( this ) {
66        free( failed_key );
67        free( failed_value );
68}
69
70// TODO: use string interface when it's ready (and implement exception msg protocol)
71[ void ] msg( * Validation_Failure ex ) {
72        serr | "Config entry " | ex->failed_key | " could not be validated. It has value " | ex->failed_value | ".";
73}
74
75
76// *********************************** main code ***********************************
77
78
79[ void ] ?{}( & KVPairs kvp ) with ( kvp ) {                            // default constructor
80        size = 0; max_size = 0; data = 0p;
81}
82
83[ void ] ?{}( & KVPairs kvp, size_t size ) {                            // initialization
84        kvp.[ size, max_size ] = [ 0, size ];
85        kvp.data = alloc( size );
86}
87
88[ void ] ^?{}( & KVPairs kvp ) with ( kvp ) {                           // destructor
89        for ( i; size ) free( data[i] );
90        free( data );
91        size = 0; max_size = 0; data = 0p;
92}
93
94[ void ] add_kv_pair( & KVPairs kv_pairs, [] char key, [] char value ) with ( kv_pairs ) {
95        if ( max_size == 0 ) {
96                max_size = 1;
97                data = alloc( max_size );
98        } else if ( size == max_size ) {
99                max_size *= 2;
100                data = alloc( max_size, data`realloc );
101        }
102
103        data[size].0 = alloc( strlen( key ) );
104        data[size].1 = alloc( strlen( value ) );
105        strcpy( data[size].0, key );
106        strcpy( data[size].1, value );
107        ++size;
108} // add_kv_pair
109
110
111[ bool ] comments( & ifstream in, [] char name ) {
112        while () {
113                in | name;
114          if ( eof( in ) ) return true;
115          if ( name[0] != '#' ) return false;
116                in | nl;                                                                        // ignore remainder of line
117        } // while
118} // comments
119
120// Parse configuration from a file formatted in tabular (CS 343) style
121[ * KVPairs ] parse_tabular_config_format( [] const char config_file, size_t num_entries ) {
122        // TODO: Change this to a unique_ptr when we fully support returning them (move semantics)
123        * KVPairs kv_pairs = new( num_entries );
124
125        ifstream in;
126        try {
127                open( in, config_file );                                        // open the configuration file for input
128
129                [64] char key;
130                [256] char value;
131
132                while () {                                                                      // parameter names can appear in any order
133                        // NOTE: Must add check to see if already read in value for this key,
134                        // once we switch to using hash table as intermediate storage
135                  if ( comments( in, key ) ) break;                     // eof ?
136                        in | value;
137
138                        add_kv_pair( *kv_pairs, key, value );
139
140                  if ( eof( in ) ) break;
141                        in | nl;                                                                // ignore remainder of line
142                } // for
143        } catch( Open_Failure * ex; ex->istream == &in ) {
144                delete( kv_pairs );
145                throw *ex;
146        } // try
147        close( in );
148
149        return kv_pairs;
150} // parse_tabular_config_format
151
152// Parse configuration values from intermediate format
153[ void ] parse_config(
154                [] const char config_file,
155                [] config_entry entries,
156                size_t num_entries,
157                KVPairs * (*parser)(const char [], size_t)
158) {
159        * KVPairs kv_pairs = parser( config_file, num_entries );
160
161        int entries_so_far = 0;
162        for ( i; kv_pairs->size ) {
163          if ( entries_so_far == num_entries ) break;
164
165                char * src_key, * src_value;
166                [ src_key, src_value ] = kv_pairs->data[i];
167
168                for ( j; num_entries ) {
169                  if ( strcmp( src_key, entries[j].key ) != 0 ) continue;
170                        // Parse the data
171                        if ( !entries[j].parse( src_value, entries[j].variable ) ) {
172                                * Parse_Failure ex = new( src_key, src_value );
173                                delete( kv_pairs );
174                                throw *ex;
175                        }
176
177                        // Validate the data
178                        if ( !entries[j].validate( entries[j].variable ) ) {
179                                * Validation_Failure ex = new( src_key, src_value );
180                                delete( kv_pairs );
181                                throw *ex;
182                        }
183
184                        ++entries_so_far;
185
186                        break;
187                }
188        }
189        // TODO: Once we get vector2+hash_table, we can more easily add the missing config keys to this error
190        if ( entries_so_far < num_entries ) {
191                delete( kv_pairs );
192                throw (Missing_Config_Entries){ num_entries - entries_so_far };
193        }
194
195        delete( kv_pairs );
196} // parse_config
197
198
199// *********************************** validation ***********************************
200
201
202forall(T | Relational( T ))
203[ bool ] is_nonnegative( & T value ) {
204        T zero_val = 0;
205        return value >= zero_val;
206}
207
208forall(T | Relational( T ))
209[ bool ] is_positive( & T value ) {
210        T zero_val = 0;
211        return value > zero_val;
212}
213
214forall(T | Relational( T ))
215[ bool ] is_nonpositive( & T value ) {
216        T zero_val = 0;
217        return value <= zero_val;
218}
219
220forall(T | Relational( T ))
221[ bool ] is_negative( & T value ) {
222        T zero_val = 0;
223        return value < zero_val;
224}
225
226
227// Local Variables: //
228// tab-width: 4 //
229// compile-command: "cfa parseconfig.cfa" //
230// End: //
Note: See TracBrowser for help on using the repository browser.