source: doc/theses/thierry_delisle_PhD/thesis/Makefile @ a6cfb4d

ADTast-experimentalpthread-emulationqualifiedEnum
Last change on this file since a6cfb4d was 512d3dc1, checked in by Peter A. Buhr <pabuhr@…>, 2 years ago

first proofread of introduction

  • Property mode set to 100644
File size: 4.8 KB
Line 
1## Define the configuration variables.
2
3Build = build
4Figures = img
5
6LaTMac = ../../../LaTeXmacros
7BibRep = ../../../bibliography
8
9Macros = ${LaTMac}
10TeXLIB = .:${Macros}:${Build}:${BibRep}:
11LaTeX  = TEXINPUTS=${TeXLIB} && export TEXINPUTS && latex -halt-on-error -output-directory=${Build}
12BibTeX = BIBINPUTS=${TeXLIB} && export BIBINPUTS && bibtex
13
14MAKEFLAGS = --no-print-directory # --silent
15VPATH = ${Build} ${Figures}
16
17## Define the text source files.
18TEXTS = ${addprefix text/, ${addsuffix .tex, \
19        front \
20        intro \
21        existing \
22        runtime \
23        core \
24        practice \
25        io \
26        eval_micro \
27        eval_macro \
28}}
29
30FIGURES = ${addsuffix .tex, \
31}
32
33PICTURES = ${addsuffix .pstex, \
34        base \
35        base_avg \
36        cache-share \
37        cache-noshare \
38        empty \
39        emptybit \
40        emptytls \
41        emptytree \
42        fairness \
43        idle \
44        idle1 \
45        idle2 \
46        idle_state \
47        io_uring \
48        pivot_ring \
49        system \
50        cycle \
51        result.cycle.jax.ops \
52        result.yield.jax.ops \
53        result.churn.jax.ops \
54        result.cycle.jax.ns \
55        result.yield.jax.ns \
56        result.churn.jax.ns \
57        result.cycle.low.jax.ops \
58        result.yield.low.jax.ops \
59        result.churn.low.jax.ops \
60        result.cycle.low.jax.ns \
61        result.yield.low.jax.ns \
62        result.churn.low.jax.ns \
63        result.memcd.updt.qps \
64        result.memcd.updt.lat \
65        result.memcd.rate.qps \
66        result.memcd.rate.99th \
67}
68
69PROGRAMS = ${addsuffix .tex, \
70}
71
72GRAPHS = ${addsuffix .tex, \
73}
74
75## Define the documents that need to be made.
76all: thesis.pdf
77thesis.pdf: ${TEXTS} ${FIGURES} ${PICTURES} thesis.tex glossary.tex local.bib ${LaTMac}/common.tex ${LaTMac}/common.sty ${BibRep}/pl.bib
78
79DOCUMENT = thesis.pdf
80BASE = ${basename ${DOCUMENT}}
81
82# Directives #
83
84.NOTPARALLEL:                                           # cannot make in parallel
85
86.PHONY : all clean                                      # not file names
87
88all : ${DOCUMENT}
89
90clean :
91        @rm -frv ${DOCUMENT} ${BASE}.ps ${Build}
92
93# File Dependencies #
94
95%.pdf : build/%.ps | ${Build}
96        ps2pdf $<
97
98build/%.ps : build/%.dvi | ${Build}
99        dvips $< -o $@
100
101build/%.dvi : %.tex Makefile | ${Build}
102        # Conditionally create an empty *.ind (index) file for inclusion until makeindex is run.
103        if [ ! -r ${basename $@}.ind ] ; then touch ${basename $@}.ind ; fi
104        # Must have *.aux file containing citations for bibtex
105        if [ ! -r ${basename $@}.aux ] ; then ${LaTeX} $< ; fi
106        -${BibTeX} ${basename $@}
107        # Some citations reference others so run again to resolve these citations
108        ${LaTeX} $<
109        -${BibTeX} ${basename $@}
110        # Make index from *.aux entries and input index at end of document
111        -makeglossaries -q -s ${basename $@}.ist ${basename $@}
112        # Make index from *.aux entries and input index at end of document
113        -makeindex ${basename $@}.idx
114        # Run again to finish citations
115        ${LaTeX} $<
116
117## Define the default recipes.
118
119${Build}:
120        mkdir -p ${Build}
121
122%.tex : fig/%.fig | ${Build}
123        fig2dev -L eepic $< > ${Build}/$@
124
125%.ps : fig/%.fig | ${Build}
126        fig2dev -L ps $< > ${Build}/$@
127
128%.pstex : fig/%.fig | ${Build}
129        fig2dev -L pstex $< > ${Build}/$@
130        fig2dev -L pstex_t -p ${Build}/$@ $< > ${Build}/$@_t
131
132%.pstex : build/%.svg | ${Build}
133        inkscape -z -D --file=$< --export-eps=${Build}/$@ --export-latex
134        mv ${Build}/$@_tex ${Build}/$@_t
135        echo "sed -i 's/$@/${Build}/$@/g' ${Build}/$@_t"
136        sed -i 's/$@/${Build}\/$@/g' ${Build}/$@_t
137
138build/fairness.svg : fig/fairness.py | ${Build}
139        python3 $< $@
140
141cycle_jax_ops_FLAGS = --MaxY=120000000
142cycle_low_jax_ops_FLAGS = --MaxY=120000000
143cycle_jax_ns_FLAGS = --MaxY=2000
144cycle_low_jax_ns_FLAGS = --MaxY=2000
145
146yield_jax_ops_FLAGS = --MaxY=150000000
147yield_low_jax_ops_FLAGS = --MaxY=150000000
148yield_jax_ns_FLAGS = --MaxY=1500
149yield_low_jax_ns_FLAGS = --MaxY=1500
150
151build/result.%.ns.svg : data/% Makefile | ${Build}
152        ../../../../benchmark/plot.py -f $< -o $@ -y "ns per ops/procs" $($(subst .,_,$*)_ns_FLAGS)
153
154build/result.%.ops.svg : data/% Makefile | ${Build}
155        ../../../../benchmark/plot.py -f $< -o $@ -y "Ops per second" $($(subst .,_,$*)_ops_FLAGS)
156
157build/result.memcd.updt.qps.svg : data/memcd.updt Makefile | ${Build}
158        ../../../../benchmark/plot.py -f $< -o $@ -y "Actual QPS" -x "Update Ratio"
159
160build/result.memcd.updt.lat.svg : data/memcd.updt Makefile | ${Build}
161        ../../../../benchmark/plot.py -f $< -o $@ -y "Average Read Latency" -x "Update Ratio"
162
163build/result.memcd.rate.qps.svg : data/memcd.rate Makefile | ${Build}
164        ../../../../benchmark/plot.py -f $< -o $@ -y "Actual QPS" -x "Target QPS"
165
166build/result.memcd.rate.99th.svg : data/memcd.rate Makefile | ${Build}
167        ../../../../benchmark/plot.py -f $< -o $@ -y "Tail Read Latency" -x "Target QPS"
168
169## pstex with inverted colors
170%.dark.pstex : fig/%.fig Makefile | ${Build}
171        fig2dev -L pstex $< > ${Build}/$@
172        sed -i 's/\/col-1 {0 setgray} bind def/\/col-1 {1 setgray} bind def/g' ${Build}/$@
173        sed -i 's/\/col0 {0.000 0.000 0.000 srgb} bind def/\/col0 {1.000 1.000 1.000 srgb} bind def/g' ${Build}/$@
174        sed -i 's/\/col7 {1.000 1.000 1.000 srgb} bind def/\/col7 {0.000 0.000 0.000 srgb} bind def/g' ${Build}/$@
175        fig2dev -L pstex_t -p ${Build}/$@ $< > ${Build}/$@_t
176
177# Local Variables: #
178# compile-command: "make" #
179# End: #
Note: See TracBrowser for help on using the repository browser.