source: doc/theses/andrew_beach_MMath/uw-ethesis.tex @ edc6ea2

arm-ehjacob/cs343-translationnew-ast-unique-expr
Last change on this file since edc6ea2 was edc6ea2, checked in by Andrew Beach <ajbeach@…>, 7 months ago

Andrew MMath: LaTeX clean-up. Went through existing to make some of the examples more managable.

  • Property mode set to 100644
File size: 12.9 KB
Line 
1%======================================================================
2% University of Waterloo Thesis Template for LaTeX
3% Last Updated November, 2020
4% by Stephen Carr, IST Client Services,
5% University of Waterloo, 200 University Ave. W., Waterloo, Ontario, Canada
6% FOR ASSISTANCE, please send mail to request@uwaterloo.ca
7
8% DISCLAIMER
9% To the best of our knowledge, this template satisfies the current uWaterloo
10% thesis requirements. However, it is your responsibility to assure that you
11% have met all requirements of the University and your particular department.
12
13% Many thanks for the feedback from many graduates who assisted the
14% development of this template. Also note that there are explanatory comments
15% and tips throughout this template.
16%======================================================================
17% Some important notes on using this template and making it your own...
18
19% The University of Waterloo has required electronic thesis submission since
20% October 2006. See the uWaterloo thesis regulations at:
21%   https://uwaterloo.ca/graduate-studies/thesis.
22% This thesis template is geared towards generating a PDF version optimized
23% for viewing on an electronic display, including hyperlinks within the PDF.
24
25% DON'T FORGET TO ADD YOUR OWN NAME AND TITLE in the "hyperref" package
26% configuration below. THIS INFORMATION GETS EMBEDDED IN THE FINAL PDF
27% DOCUMENT. You can view the information if you view properties of the PDF.
28
29% Many faculties/departments also require one or more printed copies.
30% This template attempts to satisfy both types of output.
31% See additional notes below.
32% It is based on the standard "book" document class which provides all
33% necessary sectioning structures and allows multi-part theses.
34
35% If you are using this template in Overleaf (cloud-based collaboration
36% service), then it is automatically processed and previewed for you as you
37% edit.
38
39% For people who prefer to install their own LaTeX distributions on their own
40% computers, and process the source files manually, the following notes
41% provide the sequence of tasks:
42
43% E.g. to process a thesis called "mythesis.tex" based on this template, run:
44
45% pdflatex mythesis     -- first pass of the pdflatex processor
46% bibtex mythesis       -- generates bibliography from .bib data file(s)
47% makeindex         -- should be run only if an index is used
48% pdflatex mythesis     -- fixes numbering in cross-references, bibliographic
49%                      references, glossaries, index, etc.
50% pdflatex mythesis     -- it takes a couple of passes to completely process all
51%                      cross-references
52
53% If you use the recommended LaTeX editor, Texmaker, you would open the
54% mythesis.tex file, then click the PDFLaTeX button. Then run BibTeX (under
55% the Tools menu). Then click the PDFLaTeX button two more times.
56% If you have an index as well, you'll need to run MakeIndex from the Tools
57% menu as well, before running pdflatex the last two times.
58
59% N.B. The "pdftex" program allows graphics in the following formats to be
60% included with the "\includegraphics" command: PNG, PDF, JPEG, TIFF
61% Tip: Generate your figures and photos in the size you want them to appear
62% in your thesis, rather than scaling them with \includegraphics options.
63% Tip: Any drawings you do should be in scalable vector graphic formats: SVG,
64% PNG, WMF, EPS and then converted to PNG or PDF, so they are scalable in the
65% final PDF as well.
66% Tip: Photographs should be cropped and compressed so as not to be too large.
67
68% ======================================================================
69%   D O C U M E N T   P R E A M B L E
70\RequirePackage{etoolbox}
71
72% Control if this for print (set true) or will stay digital (default).
73% Print is two sided, digital uses more colours.
74\newtoggle{printversion}
75%\toggletrue{printversion}
76
77\iftoggle{printversion}{%
78  \documentclass[letterpaper,12pt,titlepage,openright,twoside,final]{book}
79}{%
80  \documentclass[letterpaper,12pt,titlepage,oneside,final]{book}
81}
82
83% Does nothing, ignores \href tags (redefined by hyperref package).
84\newcommand{\href}[1]{#1}
85
86% For a nomenclature (optional; available from ctan.org)
87%\usepackage{nomencl}
88% Lots of math symbols and environments
89\usepackage{amsmath,amssymb,amstext}
90% For including graphics (must match graphics driver)
91\usepackage{epic,eepic}
92\usepackage{graphicx}
93% Removes large sections of the document.
94\usepackage{comment}
95% Adds todos (Must be included after comment.)
96\usepackage{todonotes}
97% cfa macros used in the document
98\usepackage{cfalab}
99
100% Hyperlinks make it very easy to navigate an electronic document.
101% In addition, this is where you should specify the thesis title and author as
102% they appear in the properties of the PDF document.
103% Use the "hyperref" package
104% N.B. HYPERREF MUST BE THE LAST PACKAGE LOADED; ADD ADDITIONAL PKGS ABOVE
105\usepackage[pagebackref=true]{hyperref}
106% N.B. pagebackref=true provides links back from the References to the body
107% text. This can cause trouble for printing.
108\hypersetup{
109    plainpages=false,       % needed if Roman numbers in frontpages
110    unicode=false,          % non-Latin characters in Acrobat's bookmarks
111    pdftoolbar=true,        % show Acrobat's toolbar?
112    pdfmenubar=true,        % show Acrobat's menu?
113    pdffitwindow=false,     % window fit to page when opened
114    pdfstartview={FitH},    % fits the width of the page to the window
115    pdfnewwindow=true,      % links in new window
116    colorlinks=true,        % false: boxed links; true: colored links
117}
118\iftoggle{printversion}{
119  \hypersetup{
120    citecolor=black,        % colour of links to bibliography
121    filecolor=black,        % colour of file links
122    linkcolor=black,        % colour of internal links
123    urlcolor=black,         % colour of external links
124  }
125}{ % Digital Version
126  \hypersetup{
127    citecolor=green,
128    filecolor=magenta,
129    linkcolor=blue,
130    urlcolor=cyan,
131  }
132}
133
134\hypersetup{
135  pdftitle={Exception Handling in Cforall},
136  pdfauthor={Andrew James Beach},
137  pdfsubject={Computer Science},
138  pdfkeywords={programming languages} {exceptions}
139      {language design} {language implementation},
140}
141
142% Exception to the rule of hyperref being the last add-on package
143\usepackage[automake,toc,abbreviations]{glossaries-extra}
144% If glossaries-extra is not in your LaTeX distribution, get it from CTAN
145% (http://ctan.org/pkg/glossaries-extra), although it's supposed to be in
146% both the TeX Live and MikTeX distributions. There are also documentation
147% and installation instructions there.
148
149% Setting up the page margins...
150\setlength{\textheight}{9in}
151\setlength{\topmargin}{-0.45in}
152\setlength{\headsep}{0.25in}
153% uWaterloo thesis requirements specify a minimum of 1 inch (72pt) margin at
154% the top, bottom, and outside page edges and a 1.125 in. (81pt) gutter margin
155% (on binding side). While this is not an issue for electronic viewing, a PDF
156% may be printed, and so we have the same page layout for both printed and
157% electronic versions, we leave the gutter margin in. Set margins to minimum
158% permitted by uWaterloo thesis regulations:
159\setlength{\marginparwidth}{0pt} % width of margin notes
160% N.B. If margin notes are used, you must adjust \textwidth, \marginparwidth
161% and \marginparsep so that the space left between the margin notes and page
162% edge is less than 15 mm (0.6 in.)
163% width of space between body text and margin notes
164\setlength{\marginparsep}{0pt}
165% Adds 1/8 in. to binding side of all
166% even-numbered pages when the "twoside" printing option is selected
167\setlength{\evensidemargin}{0.125in}
168% Adds 1/8 in. to the left of all pages when "oneside" printing is selected,
169% and to the left of all odd-numbered pages when "twoside" printing is selected
170\setlength{\oddsidemargin}{0.125in}
171% assuming US letter paper (8.5 in. x 11 in.) and side margins as above
172\setlength{\textwidth}{6.375in}
173\raggedbottom
174
175% The following statement specifies the amount of space between paragraphs.
176% Other reasonable specifications are \bigskipamount and \smallskipamount.
177\setlength{\parskip}{\medskipamount}
178
179% The following statement controls the line spacing.
180% The default spacing corresponds to good typographic conventions and only
181% slight changes (e.g., perhaps "1.2"), if any, should be made.
182\renewcommand{\baselinestretch}{1} % this is the default line space setting
183
184% By default, each chapter will start on a recto (right-hand side) page.
185% We also force each section of the front pages to start on a recto page by
186% inserting \cleardoublepage commands. In many cases, this will require that
187% the verso (left-hand) page be blank, and while it should be counted, a page
188% number should not be printed. The following statements ensure a page number
189% is not printed on an otherwise blank verso page.
190\let\origdoublepage\cleardoublepage
191\newcommand{\clearemptydoublepage}{%
192  \clearpage{\pagestyle{empty}\origdoublepage}}
193\let\cleardoublepage\clearemptydoublepage
194
195% Define Glossary terms (This is properly done here, in the preamble and
196% could also be \input{} from a separate file...)
197\input{glossaries}
198\makeglossaries
199
200
201\lstMakeShortInline@
202
203% CFA code-style for all languages
204\CFAStyle
205% CFA default lnaguage
206\lstset{language=CFA,basicstyle=\linespread{0.9}\tt}
207\lstset{moredelim=**[is][\protect\color{red}]{@}{@}}
208% Annotations from Peter:
209\newcommand{\PAB}[1]{{\color{blue}PAB: #1}}
210% Change the style of abbreviations:
211\renewcommand{\abbrevFont}{}
212
213%======================================================================
214%   L O G I C A L    D O C U M E N T
215% The logical document contains the main content of your thesis.
216% Being a large document, it is a good idea to divide your thesis into several
217% files, each one containing one chapter or other significant chunk of content,
218% so you can easily shuffle things around later if desired.
219%======================================================================
220\begin{document}
221
222%----------------------------------------------------------------------
223% FRONT MATERIAL
224% title page,declaration, borrowers' page, abstract, acknowledgements,
225% dedication, table of contents, list of tables, list of figures,
226% nomenclature, etc.
227%----------------------------------------------------------------------
228\input{uw-ethesis-frontpgs}
229
230%----------------------------------------------------------------------
231% MAIN BODY
232% We suggest using a separate file for each chapter of your thesis.
233% Start each chapter file with the \chapter command. Only use \documentclass,
234% \begin{document} and \end{document} commands in this master document.
235% Tip: Putting each sentence on a new line is a way to simplify later editing.
236%----------------------------------------------------------------------
237\input{existing}
238\input{features}
239\input{implement}
240%\input{unwinding}
241\input{future}
242
243%----------------------------------------------------------------------
244% END MATERIAL
245% Bibliography, Appendices, Index, etc.
246%----------------------------------------------------------------------
247
248% Bibliography
249
250% The following statement selects the style to use for references.
251% It controls the sort order of the entries in the bibliography and also the
252% formatting for the in-text labels.
253\bibliographystyle{plain}
254% This specifies the location of the file containing the bibliographic
255% information. It assumes you're using BibTeX to manage your references (if
256% not, why not?).
257\cleardoublepage % This is needed if the "book" document class is used, to
258% place the anchor in the correct page, because the bibliography will start
259% on its own page.
260% Use \clearpage instead if the document class uses the "oneside" argument.
261\phantomsection  % With hyperref package, enables hyperlinking from the table
262% of contents to bibliography.
263% The following statement causes the title "References" to be used for the
264% bibliography section:
265\renewcommand*{\bibname}{References}
266
267% Add the References to the Table of Contents
268\addcontentsline{toc}{chapter}{\textbf{References}}
269
270\bibliography{uw-ethesis,pl}
271% Tip: You can create multiple .bib files to organize your references. Just
272% list them all in the \bibliogaphy command, separated by commas (no spaces).
273
274% The following statement causes the specified references to be added to the
275% bibliography even if they were not cited in the text. The asterisk is a
276% wildcard that causes all entries in the bibliographic database to be
277% included (optional).
278% \nocite{*}
279%----------------------------------------------------------------------
280
281% Appendices
282
283% The \appendix statement indicates the beginning of the appendices.
284\appendix
285% Add an un-numbered title page before the appendices and a line in the Table
286% of Contents
287% \chapter*{APPENDICES}
288% \addcontentsline{toc}{chapter}{APPENDICES}
289% Appendices are just more chapters, with different labeling (letters instead
290% of numbers).
291% \input{appendix-matlab_plots.tex}
292
293% GLOSSARIES (Lists of definitions, abbreviations, symbols, etc.
294% provided by the glossaries-extra package)
295% -----------------------------
296\printglossaries
297\cleardoublepage
298\phantomsection         % allows hyperref to link to the correct page
299
300%----------------------------------------------------------------------
301\end{document} % end of logical document
Note: See TracBrowser for help on using the repository browser.