source: doc/theses/andrew_beach_MMath/uw-ethesis.tex @ 6a8208c

arm-ehjacob/cs343-translation
Last change on this file since 6a8208c was 6a8208c, checked in by Andrew Beach <ajbeach@…>, 3 months ago

Andrew MMath: Changed driver: pdflatex to latex.

  • Property mode set to 100644
File size: 14.2 KB
Line 
1%======================================================================
2% University of Waterloo Thesis Template for LaTeX
3% Last Updated November, 2020
4% by Stephen Carr, IST Client Services,
5% University of Waterloo, 200 University Ave. W., Waterloo, Ontario, Canada
6% FOR ASSISTANCE, please send mail to request@uwaterloo.ca
7
8% DISCLAIMER
9% To the best of our knowledge, this template satisfies the current uWaterloo
10% thesis requirements. However, it is your responsibility to assure that you
11% have met all requirements of the University and your particular department.
12
13% Many thanks for the feedback from many graduates who assisted the
14% development of this template. Also note that there are explanatory comments
15% and tips throughout this template.
16%======================================================================
17% Some important notes on using this template and making it your own...
18
19% The University of Waterloo has required electronic thesis submission since
20% October 2006. See the uWaterloo thesis regulations at:
21%   https://uwaterloo.ca/graduate-studies/thesis.
22% This thesis template is geared towards generating a PDF version optimized
23% for viewing on an electronic display, including hyperlinks within the PDF.
24
25% DON'T FORGET TO ADD YOUR OWN NAME AND TITLE in the "hyperref" package
26% configuration below. THIS INFORMATION GETS EMBEDDED IN THE FINAL PDF
27% DOCUMENT. You can view the information if you view properties of the PDF.
28
29% Many faculties/departments also require one or more printed copies.
30% This template attempts to satisfy both types of output.
31% See additional notes below.
32% It is based on the standard "book" document class which provides all
33% necessary sectioning structures and allows multi-part theses.
34
35% If you are using this template in Overleaf (cloud-based collaboration
36% service), then it is automatically processed and previewed for you as you
37% edit.
38
39% For people who prefer to install their own LaTeX distributions on their own
40% computers, and process the source files manually, the following notes
41% provide the sequence of tasks:
42
43% E.g. to process a thesis called "mythesis.tex" based on this template, run:
44
45% pdflatex mythesis     -- first pass of the pdflatex processor
46% bibtex mythesis       -- generates bibliography from .bib data file(s)
47% makeindex         -- should be run only if an index is used
48% pdflatex mythesis     -- fixes numbering in cross-references, bibliographic
49%                      references, glossaries, index, etc.
50% pdflatex mythesis     -- it takes a couple of passes to completely process all
51%                      cross-references
52
53% If you use the recommended LaTeX editor, Texmaker, you would open the
54% mythesis.tex file, then click the PDFLaTeX button. Then run BibTeX (under
55% the Tools menu). Then click the PDFLaTeX button two more times.
56% If you have an index as well, you'll need to run MakeIndex from the Tools
57% menu as well, before running pdflatex the last two times.
58
59% N.B. The "pdftex" program allows graphics in the following formats to be
60% included with the "\includegraphics" command: PNG, PDF, JPEG, TIFF
61% Tip: Generate your figures and photos in the size you want them to appear
62% in your thesis, rather than scaling them with \includegraphics options.
63% Tip: Any drawings you do should be in scalable vector graphic formats: SVG,
64% PNG, WMF, EPS and then converted to PNG or PDF, so they are scalable in the
65% final PDF as well.
66% Tip: Photographs should be cropped and compressed so as not to be too large.
67
68% To create a PDF output that is optimized for double-sided printing:
69% 1) comment-out the \documentclass statement in the preamble below, and
70%    un-comment the second \documentclass line.
71% 2) change the value assigned below to the boolean variable "PrintVersion"
72%    from "false" to "true".
73
74% ======================================================================
75%   D O C U M E N T   P R E A M B L E
76\RequirePackage{etoolbox}
77
78% Control if this for print (set true) or will stay digital (default).
79% Print is two sided, digital uses more colours.
80\newtoggle{printversion}
81%\toggletrue{printversion}
82
83\iftoggle{printversion}{%
84  \documentclass[letterpaper,12pt,titlepage,openright,twoside,final]{book}
85}{%
86  \documentclass[letterpaper,12pt,titlepage,oneside,final]{book}
87}
88
89% Some LaTeX commands I define for my own nomenclature.
90% If you have to, it's easier to make changes to nomenclature once here than
91% in a million places throughout your thesis!
92\newcommand{\package}[1]{\textbf{#1}} % package names in bold text
93\newcommand{\cmmd}[1]{\textbackslash\texttt{#1}} % command name in tt font
94\newcommand{\href}[1]{#1} % does nothing, but defines the command so the
95% print-optimized version will ignore \href tags (redefined by hyperref pkg).
96% Anything defined here may be redefined by packages added below...
97
98% For a nomenclature (optional; available from ctan.org)
99%\usepackage{nomencl}
100% Lots of math symbols and environments
101\usepackage{amsmath,amssymb,amstext}
102% For including graphics (must match graphics driver)
103\usepackage{epic,eepic}
104\usepackage{graphicx}
105% Removes large sections of the document.
106\usepackage{comment}
107% Adds todos (Must be included after comment.)
108\usepackage{todonotes}
109
110% Hyperlinks make it very easy to navigate an electronic document.
111% In addition, this is where you should specify the thesis title and author as
112% they appear in the properties of the PDF document.
113% Use the "hyperref" package
114% N.B. HYPERREF MUST BE THE LAST PACKAGE LOADED; ADD ADDITIONAL PKGS ABOVE
115\usepackage[pagebackref=true]{hyperref}
116% N.B. pagebackref=true provides links back from the References to the body
117% text. This can cause trouble for printing.
118\hypersetup{
119    plainpages=false,       % needed if Roman numbers in frontpages
120    unicode=false,          % non-Latin characters in Acrobat's bookmarks
121    pdftoolbar=true,        % show Acrobat's toolbar?
122    pdfmenubar=true,        % show Acrobat's menu?
123    pdffitwindow=false,     % window fit to page when opened
124    pdfstartview={FitH},    % fits the width of the page to the window
125    pdfnewwindow=true,      % links in new window
126    colorlinks=true,        % false: boxed links; true: colored links
127}
128\iftoggle{printversion}{
129  \hypersetup{
130    citecolor=black,        % colour of links to bibliography
131    filecolor=black,        % colour of file links
132    linkcolor=black,        % colour of internal links
133    urlcolor=black,         % colour of external links
134  }
135}{ % Digital Version
136  \hypersetup{
137    citecolor=green,
138    filecolor=magenta,
139    linkcolor=blue,
140    urlcolor=cyan,
141  }
142}
143
144\hypersetup{
145  pdftitle={Exception Handling in Cforall},
146  pdfauthor={Andrew James Beach},
147  pdfsubject={Computer Science},
148  pdfkeywords={programming languages} {exceptions}
149      {language design} {language implementation},
150}
151
152% Exception to the rule of hyperref being the last add-on package
153\usepackage[automake,toc,abbreviations]{glossaries-extra}
154% If glossaries-extra is not in your LaTeX distribution, get it from CTAN
155% (http://ctan.org/pkg/glossaries-extra), although it's supposed to be in
156% both the TeX Live and MikTeX distributions. There are also documentation
157% and installation instructions there.
158
159% Setting up the page margins...
160\setlength{\textheight}{9in}
161\setlength{\topmargin}{-0.45in}
162\setlength{\headsep}{0.25in}
163% uWaterloo thesis requirements specify a minimum of 1 inch (72pt) margin at
164% the top, bottom, and outside page edges and a 1.125 in. (81pt) gutter margin
165% (on binding side). While this is not an issue for electronic viewing, a PDF
166% may be printed, and so we have the same page layout for both printed and
167% electronic versions, we leave the gutter margin in. Set margins to minimum
168% permitted by uWaterloo thesis regulations:
169\setlength{\marginparwidth}{0pt} % width of margin notes
170% N.B. If margin notes are used, you must adjust \textwidth, \marginparwidth
171% and \marginparsep so that the space left between the margin notes and page
172% edge is less than 15 mm (0.6 in.)
173% width of space between body text and margin notes
174\setlength{\marginparsep}{0pt}
175% Adds 1/8 in. to binding side of all
176% even-numbered pages when the "twoside" printing option is selected
177\setlength{\evensidemargin}{0.125in}
178% Adds 1/8 in. to the left of all pages when "oneside" printing is selected,
179% and to the left of all odd-numbered pages when "twoside" printing is selected
180\setlength{\oddsidemargin}{0.125in}
181% assuming US letter paper (8.5 in. x 11 in.) and side margins as above
182\setlength{\textwidth}{6.375in}
183\raggedbottom
184
185% The following statement specifies the amount of space between paragraphs.
186% Other reasonable specifications are \bigskipamount and \smallskipamount.
187\setlength{\parskip}{\medskipamount}
188
189% The following statement controls the line spacing.
190% The default spacing corresponds to good typographic conventions and only
191% slight changes (e.g., perhaps "1.2"), if any, should be made.
192\renewcommand{\baselinestretch}{1} % this is the default line space setting
193
194% By default, each chapter will start on a recto (right-hand side) page.
195% We also force each section of the front pages to start on a recto page by
196% inserting \cleardoublepage commands. In many cases, this will require that
197% the verso (left-hand) page be blank, and while it should be counted, a page
198% number should not be printed. The following statements ensure a page number
199% is not printed on an otherwise blank verso page.
200\let\origdoublepage\cleardoublepage
201\newcommand{\clearemptydoublepage}{%
202  \clearpage{\pagestyle{empty}\origdoublepage}}
203\let\cleardoublepage\clearemptydoublepage
204
205% Define Glossary terms (This is properly done here, in the preamble and
206% could also be \input{} from a separate file...)
207\input{glossaries}
208\makeglossaries
209
210% cfa macros used in the document
211%\usepackage{cfalab}
212% I'm going to bring back eventually.
213\makeatletter
214% Combines all \CC* commands:
215\newrobustcmd*\Cpp[1][\xspace]{\cfalab@Cpp#1}
216\newcommand\cfalab@Cpp{C\kern-.1em\hbox{+\kern-.25em+}}
217% Optional arguments do not work with pdf string. (Some fix-up required.)
218\pdfstringdefDisableCommands{\def\Cpp{C++}}
219
220% Wrappers for inline code snippits.
221\newrobustcmd*\codeCFA[1]{\lstinline[language=CFA]{#1}}
222\newrobustcmd*\codeC[1]{\lstinline[language=C]{#1}}
223\newrobustcmd*\codeCpp[1]{\lstinline[language=C++]{#1}}
224\newrobustcmd*\codePy[1]{\lstinline[language=Python]{#1}}
225
226% Colour text, formatted in LaTeX style instead of TeX style.
227\newcommand*\colour[2]{{\color{#1}#2}}
228\makeatother
229
230\input{common}
231% CFA code-style for all languages
232\CFAStyle
233% CFA default lnaguage
234\lstset{language=CFA,basicstyle=\linespread{0.9}\tt}
235% Annotations from Peter:
236\newcommand{\PAB}[1]{{\color{blue}PAB: #1}}
237% Change the style of abbreviations:
238\renewcommand{\abbrevFont}{}
239
240%======================================================================
241%   L O G I C A L    D O C U M E N T
242% The logical document contains the main content of your thesis.
243% Being a large document, it is a good idea to divide your thesis into several
244% files, each one containing one chapter or other significant chunk of content,
245% so you can easily shuffle things around later if desired.
246%======================================================================
247\begin{document}
248
249%----------------------------------------------------------------------
250% FRONT MATERIAL
251% title page,declaration, borrowers' page, abstract, acknowledgements,
252% dedication, table of contents, list of tables, list of figures,
253% nomenclature, etc.
254%----------------------------------------------------------------------
255\input{uw-ethesis-frontpgs}
256
257%----------------------------------------------------------------------
258% MAIN BODY
259% We suggest using a separate file for each chapter of your thesis.
260% Start each chapter file with the \chapter command. Only use \documentclass,
261% \begin{document} and \end{document} commands in this master document.
262% Tip: Putting each sentence on a new line is a way to simplify later editing.
263%----------------------------------------------------------------------
264\input{existing}
265\input{features}
266\input{implement}
267%\input{unwinding}
268\input{future}
269
270%----------------------------------------------------------------------
271% END MATERIAL
272% Bibliography, Appendices, Index, etc.
273%----------------------------------------------------------------------
274
275% Bibliography
276
277% The following statement selects the style to use for references.
278% It controls the sort order of the entries in the bibliography and also the
279% formatting for the in-text labels.
280\bibliographystyle{plain}
281% This specifies the location of the file containing the bibliographic
282% information. It assumes you're using BibTeX to manage your references (if
283% not, why not?).
284\cleardoublepage % This is needed if the "book" document class is used, to
285% place the anchor in the correct page, because the bibliography will start
286% on its own page.
287% Use \clearpage instead if the document class uses the "oneside" argument.
288\phantomsection  % With hyperref package, enables hyperlinking from the table
289% of contents to bibliography.
290% The following statement causes the title "References" to be used for the
291% bibliography section:
292\renewcommand*{\bibname}{References}
293
294% Add the References to the Table of Contents
295\addcontentsline{toc}{chapter}{\textbf{References}}
296
297\bibliography{uw-ethesis,pl}
298% Tip: You can create multiple .bib files to organize your references. Just
299% list them all in the \bibliogaphy command, separated by commas (no spaces).
300
301% The following statement causes the specified references to be added to the
302% bibliography even if they were not cited in the text. The asterisk is a
303% wildcard that causes all entries in the bibliographic database to be
304% included (optional).
305% \nocite{*}
306%----------------------------------------------------------------------
307
308% Appendices
309
310% The \appendix statement indicates the beginning of the appendices.
311\appendix
312% Add an un-numbered title page before the appendices and a line in the Table
313% of Contents
314% \chapter*{APPENDICES}
315% \addcontentsline{toc}{chapter}{APPENDICES}
316% Appendices are just more chapters, with different labeling (letters instead
317% of numbers).
318% \input{appendix-matlab_plots.tex}
319
320% GLOSSARIES (Lists of definitions, abbreviations, symbols, etc.
321% provided by the glossaries-extra package)
322% -----------------------------
323\printglossaries
324\cleardoublepage
325\phantomsection         % allows hyperref to link to the correct page
326
327%----------------------------------------------------------------------
328\end{document} % end of logical document
Note: See TracBrowser for help on using the repository browser.