source: doc/theses/andrew_beach_MMath/uw-ethesis.tex @ 1e567ab

ADTast-experimentalenumforall-pointer-decayjacob/cs343-translationnew-ast-unique-exprpthread-emulationqualifiedEnum
Last change on this file since 1e567ab was fa7dbf1, checked in by Peter A. Buhr <pabuhr@…>, 3 years ago

proofread exisitng chapter of Andrew's thesis

  • Property mode set to 100644
File size: 13.3 KB
Line 
1%======================================================================
2% University of Waterloo Thesis Template for LaTeX
3% Last Updated November, 2020
4% by Stephen Carr, IST Client Services,
5% University of Waterloo, 200 University Ave. W., Waterloo, Ontario, Canada
6% FOR ASSISTANCE, please send mail to request@uwaterloo.ca
7
8% DISCLAIMER
9% To the best of our knowledge, this template satisfies the current uWaterloo
10% thesis requirements. However, it is your responsibility to assure that you
11% have met all requirements of the University and your particular department.
12
13% Many thanks for the feedback from many graduates who assisted the
14% development of this template. Also note that there are explanatory comments
15% and tips throughout this template.
16%======================================================================
17% Some important notes on using this template and making it your own...
18
19% The University of Waterloo has required electronic thesis submission since
20% October 2006. See the uWaterloo thesis regulations at:
21%   https://uwaterloo.ca/graduate-studies/thesis.
22% This thesis template is geared towards generating a PDF version optimized
23% for viewing on an electronic display, including hyperlinks within the PDF.
24
25% DON'T FORGET TO ADD YOUR OWN NAME AND TITLE in the "hyperref" package
26% configuration below. THIS INFORMATION GETS EMBEDDED IN THE FINAL PDF
27% DOCUMENT. You can view the information if you view properties of the PDF.
28
29% Many faculties/departments also require one or more printed copies.
30% This template attempts to satisfy both types of output.
31% See additional notes below.
32% It is based on the standard "book" document class which provides all
33% necessary sectioning structures and allows multi-part theses.
34
35% If you are using this template in Overleaf (cloud-based collaboration
36% service), then it is automatically processed and previewed for you as you
37% edit.
38
39% For people who prefer to install their own LaTeX distributions on their own
40% computers, and process the source files manually, the following notes
41% provide the sequence of tasks:
42
43% E.g. to process a thesis called "mythesis.tex" based on this template, run:
44
45% pdflatex mythesis     -- first pass of the pdflatex processor
46% bibtex mythesis       -- generates bibliography from .bib data file(s)
47% makeindex         -- should be run only if an index is used
48% pdflatex mythesis     -- fixes numbering in cross-references, bibliographic
49%                      references, glossaries, index, etc.
50% pdflatex mythesis     -- it takes a couple of passes to completely process all
51%                      cross-references
52
53% If you use the recommended LaTeX editor, Texmaker, you would open the
54% mythesis.tex file, then click the PDFLaTeX button. Then run BibTeX (under
55% the Tools menu). Then click the PDFLaTeX button two more times.
56% If you have an index as well, you'll need to run MakeIndex from the Tools
57% menu as well, before running pdflatex the last two times.
58
59% N.B. The "pdftex" program allows graphics in the following formats to be
60% included with the "\includegraphics" command: PNG, PDF, JPEG, TIFF
61% Tip: Generate your figures and photos in the size you want them to appear
62% in your thesis, rather than scaling them with \includegraphics options.
63% Tip: Any drawings you do should be in scalable vector graphic formats: SVG,
64% PNG, WMF, EPS and then converted to PNG or PDF, so they are scalable in the
65% final PDF as well.
66% Tip: Photographs should be cropped and compressed so as not to be too large.
67
68% ======================================================================
69%   D O C U M E N T   P R E A M B L E
70\RequirePackage{etoolbox}
71
72% Control if this for print (set true) or will stay digital (default).
73% Print is two sided, digital uses more colours.
74\newtoggle{printversion}
75%\toggletrue{printversion}
76
77\iftoggle{printversion}{%
78  \documentclass[letterpaper,12pt,titlepage,openright,twoside,final]{book}
79}{%
80  \documentclass[letterpaper,12pt,titlepage,oneside,final]{book}
81}
82
83% Does nothing, ignores \href tags (redefined by hyperref package).
84\newcommand{\href}[1]{#1}
85
86% For a nomenclature (optional; available from ctan.org)
87%\usepackage{nomencl}
88% Lots of math symbols and environments
89\usepackage{amsmath,amssymb,amstext}
90% For including graphics (must match graphics driver)
91\usepackage{epic,eepic}
92\usepackage{graphicx}
93% Removes large sections of the document.
94\usepackage{comment}
95% Adds todo commands.
96\usepackage{todo}
97% cfa macros used in the document
98\usepackage{cfalab}
99% allow global and individual modification of spacing
100\usepackage{enumitem}
101% Improved reference tools.
102\usepackage[nospace]{varioref}
103
104% Hyperlinks make it very easy to navigate an electronic document.
105% In addition, this is where you should specify the thesis title and author as
106% they appear in the properties of the PDF document.
107% Use the "hyperref" package
108% N.B. HYPERREF MUST BE THE LAST PACKAGE LOADED; ADD ADDITIONAL PKGS ABOVE
109\usepackage[pagebackref=true]{hyperref}
110% N.B. pagebackref=true provides links back from the References to the body
111% text. This can cause trouble for printing.
112\hypersetup{
113    plainpages=false,       % needed if Roman numbers in frontpages
114    unicode=false,          % non-Latin characters in Acrobat's bookmarks
115    pdftoolbar=true,        % show Acrobat's toolbar?
116    pdfmenubar=true,        % show Acrobat's menu?
117    pdffitwindow=false,     % window fit to page when opened
118    pdfstartview={FitH},    % fits the width of the page to the window
119    pdfnewwindow=true,      % links in new window
120    colorlinks=true,        % false: boxed links; true: colored links
121}
122\iftoggle{printversion}{
123  \hypersetup{
124    citecolor=black,        % colour of links to bibliography
125    filecolor=black,        % colour of file links
126    linkcolor=black,        % colour of internal links
127    urlcolor=black,         % colour of external links
128  }
129}{ % Digital Version
130  \hypersetup{
131    citecolor=green,
132    filecolor=magenta,
133    linkcolor=blue,
134    urlcolor=cyan,
135  }
136}
137
138\hypersetup{
139  pdftitle={Exception Handling in Cforall},
140  pdfauthor={Andrew James Beach},
141  pdfsubject={Computer Science},
142  pdfkeywords={programming languages} {exceptions}
143      {language design} {language implementation},
144}
145
146% Exception to the rule of hyperref being the last add-on package
147\usepackage[toc,abbreviations]{glossaries-extra}
148% If glossaries-extra is not in your LaTeX distribution, get it from CTAN
149% (http://ctan.org/pkg/glossaries-extra), although it's supposed to be in
150% both the TeX Live and MikTeX distributions. There are also documentation
151% and installation instructions there.
152
153% Setting up the page margins...
154\setlength{\textheight}{9in}
155\setlength{\topmargin}{-0.45in}
156\setlength{\headsep}{0.25in}
157% uWaterloo thesis requirements specify a minimum of 1 inch (72pt) margin at
158% the top, bottom, and outside page edges and a 1.125 in. (81pt) gutter margin
159% (on binding side). While this is not an issue for electronic viewing, a PDF
160% may be printed, and so we have the same page layout for both printed and
161% electronic versions, we leave the gutter margin in. Set margins to minimum
162% permitted by uWaterloo thesis regulations:
163\setlength{\marginparwidth}{0pt} % width of margin notes
164% N.B. If margin notes are used, you must adjust \textwidth, \marginparwidth
165% and \marginparsep so that the space left between the margin notes and page
166% edge is less than 15 mm (0.6 in.)
167% width of space between body text and margin notes
168\setlength{\marginparsep}{0pt}
169% Adds 1/8 in. to binding side of all
170% even-numbered pages when the "twoside" printing option is selected
171\setlength{\evensidemargin}{0.125in}
172% Adds 1/8 in. to the left of all pages when "oneside" printing is selected,
173% and to the left of all odd-numbered pages when "twoside" printing is selected
174\setlength{\oddsidemargin}{0.125in}
175% assuming US letter paper (8.5 in. x 11 in.) and side margins as above
176\setlength{\textwidth}{6.375in}
177\raggedbottom
178
179% The following statement specifies the amount of space between paragraphs.
180% Other reasonable specifications are \bigskipamount and \smallskipamount.
181\setlength{\parskip}{\medskipamount}
182
183% The following statement controls the line spacing.
184% The default spacing corresponds to good typographic conventions and only
185% slight changes (e.g., perhaps "1.2"), if any, should be made.
186\renewcommand{\baselinestretch}{1} % this is the default line space setting
187
188% By default, each chapter will start on a recto (right-hand side) page.
189% We also force each section of the front pages to start on a recto page by
190% inserting \cleardoublepage commands. In many cases, this will require that
191% the verso (left-hand) page be blank, and while it should be counted, a page
192% number should not be printed. The following statements ensure a page number
193% is not printed on an otherwise blank verso page.
194\let\origdoublepage\cleardoublepage
195\newcommand{\clearemptydoublepage}{%
196  \clearpage{\pagestyle{empty}\origdoublepage}}
197\let\cleardoublepage\clearemptydoublepage
198
199% Define Glossary terms (This is properly done here, in the preamble and
200% could also be \input{} from a separate file...)
201\input{glossaries}
202\makeglossaries
203
204% New commands/options for this document alone:
205% Code snipits with formating and line-breaks.
206\newcommand\defaultResumptionHandler{\texttt{default\-Resumption\-Handler}}
207\newcommand\defaultTerminationHandler{\texttt{default\-Termination\-Handler}}
208
209% listings package configuation:
210\lstMakeShortInline@
211\lstset{language=CFA,style=cfacommon,basicstyle=\linespread{0.9}\tt}
212% PAB causes problems with inline @=
213%\lstset{moredelim=**[is][\protect\color{red}]{@}{@}}
214% Annotations from Peter:
215\newcommand{\PAB}[1]{{\color{blue}PAB: #1}}
216% Change the style of abbreviations:
217\renewcommand{\abbrevFont}{}
218
219%======================================================================
220%   L O G I C A L    D O C U M E N T
221% The logical document contains the main content of your thesis.
222% Being a large document, it is a good idea to divide your thesis into several
223% files, each one containing one chapter or other significant chunk of content,
224% so you can easily shuffle things around later if desired.
225%======================================================================
226\begin{document}
227
228%----------------------------------------------------------------------
229% FRONT MATERIAL
230% title page,declaration, borrowers' page, abstract, acknowledgements,
231% dedication, table of contents, list of tables, list of figures,
232% nomenclature, etc.
233%----------------------------------------------------------------------
234\input{uw-ethesis-frontpgs}
235
236%----------------------------------------------------------------------
237% MAIN BODY
238% We suggest using a separate file for each chapter of your thesis.
239% Start each chapter file with the \chapter command. Only use \documentclass,
240% \begin{document} and \end{document} commands in this master document.
241% Tip: Putting each sentence on a new line is a way to simplify later editing.
242%----------------------------------------------------------------------
243\input{intro}
244\input{existing}
245\input{features}
246\input{implement}
247\input{performance}
248\input{future}
249
250%----------------------------------------------------------------------
251% END MATERIAL
252% Bibliography, Appendices, Index, etc.
253%----------------------------------------------------------------------
254
255% Bibliography
256
257% The following statement selects the style to use for references.
258% It controls the sort order of the entries in the bibliography and also the
259% formatting for the in-text labels.
260\bibliographystyle{plain}
261% This specifies the location of the file containing the bibliographic
262% information. It assumes you're using BibTeX to manage your references (if
263% not, why not?).
264\cleardoublepage % This is needed if the "book" document class is used, to
265% place the anchor in the correct page, because the bibliography will start
266% on its own page.
267% Use \clearpage instead if the document class uses the "oneside" argument.
268\phantomsection  % With hyperref package, enables hyperlinking from the table
269% of contents to bibliography.
270% The following statement causes the title "References" to be used for the
271% bibliography section:
272\renewcommand*{\bibname}{References}
273
274% Add the References to the Table of Contents
275\addcontentsline{toc}{chapter}{\textbf{References}}
276
277\bibliography{uw-ethesis,pl}
278% Tip: You can create multiple .bib files to organize your references. Just
279% list them all in the \bibliogaphy command, separated by commas (no spaces).
280
281% The following statement causes the specified references to be added to the
282% bibliography even if they were not cited in the text. The asterisk is a
283% wildcard that causes all entries in the bibliographic database to be
284% included (optional).
285% \nocite{*}
286%----------------------------------------------------------------------
287
288% Appendices
289
290% The \appendix statement indicates the beginning of the appendices.
291\appendix
292% Add an un-numbered title page before the appendices and a line in the Table
293% of Contents
294% \chapter*{APPENDICES}
295% \addcontentsline{toc}{chapter}{APPENDICES}
296% Appendices are just more chapters, with different labeling (letters instead
297% of numbers).
298% \input{appendix-matlab_plots.tex}
299
300% GLOSSARIES (Lists of definitions, abbreviations, symbols, etc.
301% provided by the glossaries-extra package)
302% -----------------------------
303\printglossaries
304\cleardoublepage
305\phantomsection         % allows hyperref to link to the correct page
306
307\todos
308
309%----------------------------------------------------------------------
310\end{document} % end of logical document
Note: See TracBrowser for help on using the repository browser.