source: doc/theses/andrew_beach_MMath/uw-ethesis.tex @ 1c1c180

arm-ehjacob/cs343-translationnew-ast-unique-expr
Last change on this file since 1c1c180 was 1c1c180, checked in by Andrew Beach <ajbeach@…>, 9 months ago

Fixed line length and trailing whitespace on modified tex files.

  • Property mode set to 100644
File size: 14.1 KB
Line 
1%======================================================================
2% University of Waterloo Thesis Template for LaTeX
3% Last Updated November, 2020
4% by Stephen Carr, IST Client Services,
5% University of Waterloo, 200 University Ave. W., Waterloo, Ontario, Canada
6% FOR ASSISTANCE, please send mail to request@uwaterloo.ca
7
8% DISCLAIMER
9% To the best of our knowledge, this template satisfies the current uWaterloo
10% thesis requirements. However, it is your responsibility to assure that you
11% have met all requirements of the University and your particular department.
12
13% Many thanks for the feedback from many graduates who assisted the
14% development of this template. Also note that there are explanatory comments
15% and tips throughout this template.
16%======================================================================
17% Some important notes on using this template and making it your own...
18
19% The University of Waterloo has required electronic thesis submission since
20% October 2006. See the uWaterloo thesis regulations at:
21%   https://uwaterloo.ca/graduate-studies/thesis.
22% This thesis template is geared towards generating a PDF version optimized
23% for viewing on an electronic display, including hyperlinks within the PDF.
24
25% DON'T FORGET TO ADD YOUR OWN NAME AND TITLE in the "hyperref" package
26% configuration below. THIS INFORMATION GETS EMBEDDED IN THE FINAL PDF
27% DOCUMENT. You can view the information if you view properties of the PDF.
28
29% Many faculties/departments also require one or more printed copies.
30% This template attempts to satisfy both types of output.
31% See additional notes below.
32% It is based on the standard "book" document class which provides all
33% necessary sectioning structures and allows multi-part theses.
34
35% If you are using this template in Overleaf (cloud-based collaboration
36% service), then it is automatically processed and previewed for you as you
37% edit.
38
39% For people who prefer to install their own LaTeX distributions on their own
40% computers, and process the source files manually, the following notes
41% provide the sequence of tasks:
42
43% E.g. to process a thesis called "mythesis.tex" based on this template, run:
44
45% pdflatex mythesis     -- first pass of the pdflatex processor
46% bibtex mythesis       -- generates bibliography from .bib data file(s)
47% makeindex         -- should be run only if an index is used
48% pdflatex mythesis     -- fixes numbering in cross-references, bibliographic
49%                      references, glossaries, index, etc.
50% pdflatex mythesis     -- it takes a couple of passes to completely process all
51%                      cross-references
52
53% If you use the recommended LaTeX editor, Texmaker, you would open the
54% mythesis.tex file, then click the PDFLaTeX button. Then run BibTeX (under
55% the Tools menu). Then click the PDFLaTeX button two more times.
56% If you have an index as well, you'll need to run MakeIndex from the Tools
57% menu as well, before running pdflatex the last two times.
58
59% N.B. The "pdftex" program allows graphics in the following formats to be
60% included with the "\includegraphics" command: PNG, PDF, JPEG, TIFF
61% Tip: Generate your figures and photos in the size you want them to appear
62% in your thesis, rather than scaling them with \includegraphics options.
63% Tip: Any drawings you do should be in scalable vector graphic formats: SVG,
64% PNG, WMF, EPS and then converted to PNG or PDF, so they are scalable in the
65% final PDF as well.
66% Tip: Photographs should be cropped and compressed so as not to be too large.
67
68% To create a PDF output that is optimized for double-sided printing:
69% 1) comment-out the \documentclass statement in the preamble below, and
70%    un-comment the second \documentclass line.
71% 2) change the value assigned below to the boolean variable "PrintVersion"
72%    from " false" to "true".
73
74% ======================================================================
75%   D O C U M E N T   P R E A M B L E
76% Specify the document class, default style attributes, page dimensions, etc.
77% For hyperlinked PDF, suitable for viewing on a computer, use this:
78\documentclass[letterpaper,12pt,titlepage,oneside,final]{book}
79
80% For PDF, suitable for double-sided printing, change the PrintVersion
81% variable below to "true" and use this \documentclass line instead of the
82% one above:
83%\documentclass[letterpaper,12pt,titlepage,openright,twoside,final]{book}
84
85% Some LaTeX commands I define for my own nomenclature.
86% If you have to, it's easier to make changes to nomenclature once here than
87% in a million places throughout your thesis!
88\newcommand{\package}[1]{\textbf{#1}} % package names in bold text
89\newcommand{\cmmd}[1]{\textbackslash\texttt{#1}} % command name in tt font
90\newcommand{\href}[1]{#1} % does nothing, but defines the command so the
91% print-optimized version will ignore \href tags (redefined by hyperref pkg).
92%\newcommand{\texorpdfstring}[2]{#1} % does nothing, but defines the command
93% Anything defined here may be redefined by packages added below...
94
95% This package allows if-then-else control structures.
96\usepackage{ifthen}
97\newboolean{PrintVersion}
98\setboolean{PrintVersion}{false}
99% CHANGE THIS VALUE TO "true" as necessary, to improve printed results for
100% hard copies by overriding some options of the hyperref package, called below.
101
102%\usepackage{nomencl} % For a nomenclature (optional; available from ctan.org)
103% Lots of math symbols and environments
104\usepackage{amsmath,amssymb,amstext}
105% For including graphics N.B. pdftex graphics driver
106\usepackage[pdftex]{graphicx}
107
108% Hyperlinks make it very easy to navigate an electronic document.
109% In addition, this is where you should specify the thesis title and author as
110% they appear in the properties of the PDF document.
111% Use the "hyperref" package
112% N.B. HYPERREF MUST BE THE LAST PACKAGE LOADED; ADD ADDITIONAL PKGS ABOVE
113\usepackage[pdftex,pagebackref=true]{hyperref} % with basic options
114%\usepackage[pdftex,pagebackref=true]{hyperref}
115% N.B. pagebackref=true provides links back from the References to the body
116% text. This can cause trouble for printing.
117\hypersetup{
118    plainpages=false,       % needed if Roman numbers in frontpages
119    unicode=false,          % non-Latin characters in Acrobat's bookmarks
120    pdftoolbar=true,        % show Acrobat's toolbar?
121    pdfmenubar=true,        % show Acrobat's menu?
122    pdffitwindow=false,     % window fit to page when opened
123    pdfstartview={FitH},    % fits the width of the page to the window
124%    pdftitle={uWaterloo\ LaTeX\ Thesis\ Template}, % title: CHANGE THIS TEXT!
125%    pdfauthor={Author},    % author: CHANGE THIS TEXT! and uncomment this line
126%    pdfsubject={Subject},  % subject: CHANGE THIS TEXT! and uncomment this line
127%    pdfkeywords={keyword1} {key2} {key3}, % optional list of keywords
128    pdfnewwindow=true,      % links in new window
129    colorlinks=true,        % false: boxed links; true: colored links
130    linkcolor=blue,         % color of internal links
131    citecolor=green,        % color of links to bibliography
132    filecolor=magenta,      % color of file links
133    urlcolor=cyan           % color of external links
134}
135% for improved print quality, change some hyperref options
136\ifthenelse{\boolean{PrintVersion}}{
137\hypersetup{    % override some previously defined hyperref options
138%    colorlinks,%
139    citecolor=black,%
140    filecolor=black,%
141    linkcolor=black,%
142    urlcolor=black}
143}{} % end of ifthenelse (no else)
144
145% Exception to the rule of hyperref being the last add-on package
146\usepackage[automake,toc,abbreviations]{glossaries-extra}
147% If glossaries-extra is not in your LaTeX distribution, get it from CTAN
148% (http://ctan.org/pkg/glossaries-extra), although it's supposed to be in
149% both the TeX Live and MikTeX distributions. There are also documentation
150% and installation instructions there.
151
152% Setting up the page margins...
153\setlength{\textheight}{9in}
154\setlength{\topmargin}{-0.45in}
155\setlength{\headsep}{0.25in}
156% uWaterloo thesis requirements specify a minimum of 1 inch (72pt) margin at
157% the top, bottom, and outside page edges and a 1.125 in. (81pt) gutter margin
158% (on binding side). While this is not an issue for electronic viewing, a PDF
159% may be printed, and so we have the same page layout for both printed and
160% electronic versions, we leave the gutter margin in. Set margins to minimum
161% permitted by uWaterloo thesis regulations:
162\setlength{\marginparwidth}{0pt} % width of margin notes
163% N.B. If margin notes are used, you must adjust \textwidth, \marginparwidth
164% and \marginparsep so that the space left between the margin notes and page
165% edge is less than 15 mm (0.6 in.)
166% width of space between body text and margin notes
167\setlength{\marginparsep}{0pt}
168% Adds 1/8 in. to binding side of all
169% even-numbered pages when the "twoside" printing option is selected
170\setlength{\evensidemargin}{0.125in}
171% Adds 1/8 in. to the left of all pages when "oneside" printing is selected,
172% and to the left of all odd-numbered pages when "twoside" printing is selected
173\setlength{\oddsidemargin}{0.125in}
174% assuming US letter paper (8.5 in. x 11 in.) and side margins as above
175\setlength{\textwidth}{6.375in}
176\raggedbottom
177
178% The following statement specifies the amount of space between paragraphs.
179% Other reasonable specifications are \bigskipamount and \smallskipamount.
180\setlength{\parskip}{\medskipamount}
181
182% The following statement controls the line spacing.
183% The default spacing corresponds to good typographic conventions and only
184% slight changes (e.g., perhaps "1.2"), if any, should be made.
185\renewcommand{\baselinestretch}{1} % this is the default line space setting
186
187% By default, each chapter will start on a recto (right-hand side) page.
188% We also force each section of the front pages to start on a recto page by
189% inserting \cleardoublepage commands. In many cases, this will require that
190% the verso (left-hand) page be blank, and while it should be counted, a page
191% number should not be printed. The following statements ensure a page number
192% is not printed on an otherwise blank verso page.
193\let\origdoublepage\cleardoublepage
194\newcommand{\clearemptydoublepage}{%
195  \clearpage{\pagestyle{empty}\origdoublepage}}
196\let\cleardoublepage\clearemptydoublepage
197
198% Define Glossary terms (This is properly done here, in the preamble and
199% could also be \input{} from a separate file...)
200\input{glossaries}
201\makeglossaries
202
203\usepackage{comment}
204% cfa macros used in the document
205%\usepackage{cfalab}
206\input{common}
207\CFAStyle                                               % CFA code-style for all languages
208\lstset{language=CFA,basicstyle=\linespread{0.9}\tt}    % CFA default lnaguage
209\newcommand{\PAB}[1]{{\color{blue}PAB: #1}}
210
211%======================================================================
212%   L O G I C A L    D O C U M E N T
213% The logical document contains the main content of your thesis.
214% Being a large document, it is a good idea to divide your thesis into several
215% files, each one containing one chapter or other significant chunk of content,
216% so you can easily shuffle things around later if desired.
217%======================================================================
218\begin{document}
219
220%----------------------------------------------------------------------
221% FRONT MATERIAL
222% title page,declaration, borrowers' page, abstract, acknowledgements,
223% dedication, table of contents, list of tables, list of figures,
224% nomenclature, etc.
225%----------------------------------------------------------------------
226\input{uw-ethesis-frontpgs}
227
228%----------------------------------------------------------------------
229% MAIN BODY
230% We suggest using a separate file for each chapter of your thesis.
231% Start each chapter file with the \chapter command. Only use \documentclass,
232% \begin{document} and \end{document} commands in this master document.
233% Tip: Putting each sentence on a new line is a way to simplify later editing.
234%----------------------------------------------------------------------
235\input{existing}
236\input{features}
237\input{implement}
238%\input{unwinding}
239\input{future}
240
241%----------------------------------------------------------------------
242% END MATERIAL
243% Bibliography, Appendices, Index, etc.
244%----------------------------------------------------------------------
245
246% Bibliography
247
248% The following statement selects the style to use for references.
249% It controls the sort order of the entries in the bibliography and also the
250% formatting for the in-text labels.
251\bibliographystyle{plain}
252% This specifies the location of the file containing the bibliographic
253% information. It assumes you're using BibTeX to manage your references (if
254% not, why not?).
255\cleardoublepage % This is needed if the "book" document class is used, to
256% place the anchor in the correct page, because the bibliography will start
257% on its own page.
258% Use \clearpage instead if the document class uses the "oneside" argument.
259\phantomsection  % With hyperref package, enables hyperlinking from the table
260% of contents to bibliography.
261% The following statement causes the title "References" to be used for the
262% bibliography section:
263\renewcommand*{\bibname}{References}
264
265% Add the References to the Table of Contents
266\addcontentsline{toc}{chapter}{\textbf{References}}
267
268\bibliography{uw-ethesis,pl}
269% Tip: You can create multiple .bib files to organize your references. Just
270% list them all in the \bibliogaphy command, separated by commas (no spaces).
271
272% The following statement causes the specified references to be added to the
273% bibliography even if they were not cited in the text. The asterisk is a
274% wildcard that causes all entries in the bibliographic database to be
275% included (optional).
276% \nocite{*}
277%----------------------------------------------------------------------
278
279% Appendices
280
281% The \appendix statement indicates the beginning of the appendices.
282\appendix
283% Add an un-numbered title page before the appendices and a line in the Table
284% of Contents
285% \chapter*{APPENDICES}
286% \addcontentsline{toc}{chapter}{APPENDICES}
287% Appendices are just more chapters, with different labeling (letters instead
288% of numbers).
289% \input{appendix-matlab_plots.tex}
290
291% GLOSSARIES (Lists of definitions, abbreviations, symbols, etc.
292% provided by the glossaries-extra package)
293% -----------------------------
294\printglossaries
295\cleardoublepage
296\phantomsection         % allows hyperref to link to the correct page
297
298%----------------------------------------------------------------------
299\end{document} % end of logical document
Note: See TracBrowser for help on using the repository browser.