source: doc/theses/andrew_beach_MMath/uw-ethesis.tex @ 7039ab9

arm-ehjacob/cs343-translationnew-ast-unique-expr
Last change on this file since 7039ab9 was 7039ab9, checked in by Peter A. Buhr <pabuhr@…>, 7 months ago

add xfig figures

  • Property mode set to 100644
File size: 14.7 KB
RevLine 
[f28fdee]1%======================================================================
[1c1c180]2% University of Waterloo Thesis Template for LaTeX
3% Last Updated November, 2020
4% by Stephen Carr, IST Client Services,
[f28fdee]5% University of Waterloo, 200 University Ave. W., Waterloo, Ontario, Canada
6% FOR ASSISTANCE, please send mail to request@uwaterloo.ca
7
8% DISCLAIMER
[1c1c180]9% To the best of our knowledge, this template satisfies the current uWaterloo
10% thesis requirements. However, it is your responsibility to assure that you
11% have met all requirements of the University and your particular department.
[f28fdee]12
[1c1c180]13% Many thanks for the feedback from many graduates who assisted the
14% development of this template. Also note that there are explanatory comments
15% and tips throughout this template.
[f28fdee]16%======================================================================
17% Some important notes on using this template and making it your own...
18
[1c1c180]19% The University of Waterloo has required electronic thesis submission since
20% October 2006. See the uWaterloo thesis regulations at:
21%   https://uwaterloo.ca/graduate-studies/thesis.
22% This thesis template is geared towards generating a PDF version optimized
23% for viewing on an electronic display, including hyperlinks within the PDF.
[f28fdee]24
[1c1c180]25% DON'T FORGET TO ADD YOUR OWN NAME AND TITLE in the "hyperref" package
26% configuration below. THIS INFORMATION GETS EMBEDDED IN THE FINAL PDF
27% DOCUMENT. You can view the information if you view properties of the PDF.
[f28fdee]28
[1c1c180]29% Many faculties/departments also require one or more printed copies.
30% This template attempts to satisfy both types of output.
[f28fdee]31% See additional notes below.
[1c1c180]32% It is based on the standard "book" document class which provides all
33% necessary sectioning structures and allows multi-part theses.
[f28fdee]34
[1c1c180]35% If you are using this template in Overleaf (cloud-based collaboration
36% service), then it is automatically processed and previewed for you as you
37% edit.
38
39% For people who prefer to install their own LaTeX distributions on their own
40% computers, and process the source files manually, the following notes
41% provide the sequence of tasks:
[f28fdee]42
43% E.g. to process a thesis called "mythesis.tex" based on this template, run:
44
45% pdflatex mythesis     -- first pass of the pdflatex processor
46% bibtex mythesis       -- generates bibliography from .bib data file(s)
[1c1c180]47% makeindex         -- should be run only if an index is used
48% pdflatex mythesis     -- fixes numbering in cross-references, bibliographic
49%                      references, glossaries, index, etc.
50% pdflatex mythesis     -- it takes a couple of passes to completely process all
51%                      cross-references
52
53% If you use the recommended LaTeX editor, Texmaker, you would open the
54% mythesis.tex file, then click the PDFLaTeX button. Then run BibTeX (under
55% the Tools menu). Then click the PDFLaTeX button two more times.
56% If you have an index as well, you'll need to run MakeIndex from the Tools
57% menu as well, before running pdflatex the last two times.
58
59% N.B. The "pdftex" program allows graphics in the following formats to be
60% included with the "\includegraphics" command: PNG, PDF, JPEG, TIFF
61% Tip: Generate your figures and photos in the size you want them to appear
62% in your thesis, rather than scaling them with \includegraphics options.
63% Tip: Any drawings you do should be in scalable vector graphic formats: SVG,
64% PNG, WMF, EPS and then converted to PNG or PDF, so they are scalable in the
65% final PDF as well.
[f28fdee]66% Tip: Photographs should be cropped and compressed so as not to be too large.
67
[1c1c180]68% To create a PDF output that is optimized for double-sided printing:
69% 1) comment-out the \documentclass statement in the preamble below, and
70%    un-comment the second \documentclass line.
71% 2) change the value assigned below to the boolean variable "PrintVersion"
[29c9b23]72%    from "false" to "true".
[f28fdee]73
[1c1c180]74% ======================================================================
[f28fdee]75%   D O C U M E N T   P R E A M B L E
[1c1c180]76% Specify the document class, default style attributes, page dimensions, etc.
[f28fdee]77% For hyperlinked PDF, suitable for viewing on a computer, use this:
78\documentclass[letterpaper,12pt,titlepage,oneside,final]{book}
79
[1c1c180]80% For PDF, suitable for double-sided printing, change the PrintVersion
81% variable below to "true" and use this \documentclass line instead of the
82% one above:
[f28fdee]83%\documentclass[letterpaper,12pt,titlepage,openright,twoside,final]{book}
84
[29c9b23]85\usepackage{etoolbox}
86
[f28fdee]87% Some LaTeX commands I define for my own nomenclature.
[1c1c180]88% If you have to, it's easier to make changes to nomenclature once here than
89% in a million places throughout your thesis!
[f28fdee]90\newcommand{\package}[1]{\textbf{#1}} % package names in bold text
[1c1c180]91\newcommand{\cmmd}[1]{\textbackslash\texttt{#1}} % command name in tt font
92\newcommand{\href}[1]{#1} % does nothing, but defines the command so the
93% print-optimized version will ignore \href tags (redefined by hyperref pkg).
[f28fdee]94% Anything defined here may be redefined by packages added below...
95
96% This package allows if-then-else control structures.
97\usepackage{ifthen}
98\newboolean{PrintVersion}
99\setboolean{PrintVersion}{false}
[1c1c180]100% CHANGE THIS VALUE TO "true" as necessary, to improve printed results for
101% hard copies by overriding some options of the hyperref package, called below.
[f28fdee]102
103%\usepackage{nomencl} % For a nomenclature (optional; available from ctan.org)
[1c1c180]104% Lots of math symbols and environments
105\usepackage{amsmath,amssymb,amstext}
106% For including graphics N.B. pdftex graphics driver
[7039ab9]107%\usepackage[pdftex]{graphicx}
108\usepackage{epic,eepic}
109\usepackage{graphicx}
[29c9b23]110% Removes large sections of the document.
111\usepackage{comment}
[1830a86]112% Adds todos (Must be included after comment.)
113\usepackage{todonotes}
114
[f28fdee]115
116% Hyperlinks make it very easy to navigate an electronic document.
[1c1c180]117% In addition, this is where you should specify the thesis title and author as
118% they appear in the properties of the PDF document.
[f28fdee]119% Use the "hyperref" package
120% N.B. HYPERREF MUST BE THE LAST PACKAGE LOADED; ADD ADDITIONAL PKGS ABOVE
[7039ab9]121%\usepackage[pdftex,pagebackref=true]{hyperref} % with basic options
122\usepackage[pagebackref=true]{hyperref} % with basic options
[f28fdee]123%\usepackage[pdftex,pagebackref=true]{hyperref}
[1c1c180]124% N.B. pagebackref=true provides links back from the References to the body
125% text. This can cause trouble for printing.
[f28fdee]126\hypersetup{
127    plainpages=false,       % needed if Roman numbers in frontpages
[7eb6eb5]128    unicode=false,          % non-Latin characters in Acrobat's bookmarks
129    pdftoolbar=true,        % show Acrobat's toolbar?
130    pdfmenubar=true,        % show Acrobat's menu?
[f28fdee]131    pdffitwindow=false,     % window fit to page when opened
132    pdfstartview={FitH},    % fits the width of the page to the window
[1c1c180]133%    pdftitle={uWaterloo\ LaTeX\ Thesis\ Template}, % title: CHANGE THIS TEXT!
[f28fdee]134%    pdfauthor={Author},    % author: CHANGE THIS TEXT! and uncomment this line
135%    pdfsubject={Subject},  % subject: CHANGE THIS TEXT! and uncomment this line
[1c1c180]136%    pdfkeywords={keyword1} {key2} {key3}, % optional list of keywords
[f28fdee]137    pdfnewwindow=true,      % links in new window
138    colorlinks=true,        % false: boxed links; true: colored links
139    linkcolor=blue,         % color of internal links
140    citecolor=green,        % color of links to bibliography
141    filecolor=magenta,      % color of file links
142    urlcolor=cyan           % color of external links
143}
[1c1c180]144% for improved print quality, change some hyperref options
145\ifthenelse{\boolean{PrintVersion}}{
[f28fdee]146\hypersetup{    % override some previously defined hyperref options
147%    colorlinks,%
148    citecolor=black,%
149    filecolor=black,%
150    linkcolor=black,%
151    urlcolor=black}
152}{} % end of ifthenelse (no else)
153
[1c1c180]154% Exception to the rule of hyperref being the last add-on package
155\usepackage[automake,toc,abbreviations]{glossaries-extra}
156% If glossaries-extra is not in your LaTeX distribution, get it from CTAN
157% (http://ctan.org/pkg/glossaries-extra), although it's supposed to be in
158% both the TeX Live and MikTeX distributions. There are also documentation
159% and installation instructions there.
[f28fdee]160
161% Setting up the page margins...
[1c1c180]162\setlength{\textheight}{9in}
163\setlength{\topmargin}{-0.45in}
164\setlength{\headsep}{0.25in}
165% uWaterloo thesis requirements specify a minimum of 1 inch (72pt) margin at
166% the top, bottom, and outside page edges and a 1.125 in. (81pt) gutter margin
167% (on binding side). While this is not an issue for electronic viewing, a PDF
168% may be printed, and so we have the same page layout for both printed and
169% electronic versions, we leave the gutter margin in. Set margins to minimum
170% permitted by uWaterloo thesis regulations:
[f28fdee]171\setlength{\marginparwidth}{0pt} % width of margin notes
172% N.B. If margin notes are used, you must adjust \textwidth, \marginparwidth
173% and \marginparsep so that the space left between the margin notes and page
174% edge is less than 15 mm (0.6 in.)
[1c1c180]175% width of space between body text and margin notes
176\setlength{\marginparsep}{0pt}
177% Adds 1/8 in. to binding side of all
[f28fdee]178% even-numbered pages when the "twoside" printing option is selected
[1c1c180]179\setlength{\evensidemargin}{0.125in}
180% Adds 1/8 in. to the left of all pages when "oneside" printing is selected,
181% and to the left of all odd-numbered pages when "twoside" printing is selected
182\setlength{\oddsidemargin}{0.125in}
183% assuming US letter paper (8.5 in. x 11 in.) and side margins as above
184\setlength{\textwidth}{6.375in}
[f28fdee]185\raggedbottom
186
[1c1c180]187% The following statement specifies the amount of space between paragraphs.
188% Other reasonable specifications are \bigskipamount and \smallskipamount.
[f28fdee]189\setlength{\parskip}{\medskipamount}
190
[1c1c180]191% The following statement controls the line spacing.
192% The default spacing corresponds to good typographic conventions and only
193% slight changes (e.g., perhaps "1.2"), if any, should be made.
[f28fdee]194\renewcommand{\baselinestretch}{1} % this is the default line space setting
195
196% By default, each chapter will start on a recto (right-hand side) page.
[1c1c180]197% We also force each section of the front pages to start on a recto page by
198% inserting \cleardoublepage commands. In many cases, this will require that
199% the verso (left-hand) page be blank, and while it should be counted, a page
200% number should not be printed. The following statements ensure a page number
201% is not printed on an otherwise blank verso page.
[f28fdee]202\let\origdoublepage\cleardoublepage
203\newcommand{\clearemptydoublepage}{%
204  \clearpage{\pagestyle{empty}\origdoublepage}}
205\let\cleardoublepage\clearemptydoublepage
206
[1c1c180]207% Define Glossary terms (This is properly done here, in the preamble and
208% could also be \input{} from a separate file...)
[f28fdee]209\input{glossaries}
210\makeglossaries
211
212% cfa macros used in the document
213%\usepackage{cfalab}
[29c9b23]214% I'm going to bring back eventually.
215\makeatletter
216% Combines all \CC* commands:
217\newrobustcmd*\Cpp[1][\xspace]{\cfalab@Cpp#1}
218\newcommand\cfalab@Cpp{C\kern-.1em\hbox{+\kern-.25em+}}
219% Optional arguments do not work with pdf string. (Some fix-up required.)
220\pdfstringdefDisableCommands{\def\Cpp{C++}}
[1830a86]221
222% Colour text, formatted in LaTeX style instead of TeX style.
223\newcommand*\colour[2]{{\color{#1}#2}}
[29c9b23]224\makeatother
225
[f28fdee]226\input{common}
[29c9b23]227% CFA code-style for all languages
228\CFAStyle
229% CFA default lnaguage
230\lstset{language=CFA,basicstyle=\linespread{0.9}\tt}
231% Annotations from Peter:
[7eb6eb5]232\newcommand{\PAB}[1]{{\color{blue}PAB: #1}}
[29c9b23]233% Change the style of abbreviations:
234\renewcommand{\abbrevFont}{}
[f28fdee]235
236%======================================================================
237%   L O G I C A L    D O C U M E N T
238% The logical document contains the main content of your thesis.
[1c1c180]239% Being a large document, it is a good idea to divide your thesis into several
240% files, each one containing one chapter or other significant chunk of content,
241% so you can easily shuffle things around later if desired.
[f28fdee]242%======================================================================
243\begin{document}
244
245%----------------------------------------------------------------------
246% FRONT MATERIAL
247% title page,declaration, borrowers' page, abstract, acknowledgements,
[1c1c180]248% dedication, table of contents, list of tables, list of figures,
249% nomenclature, etc.
[f28fdee]250%----------------------------------------------------------------------
[1c1c180]251\input{uw-ethesis-frontpgs}
[f28fdee]252
253%----------------------------------------------------------------------
254% MAIN BODY
255% We suggest using a separate file for each chapter of your thesis.
[1c1c180]256% Start each chapter file with the \chapter command. Only use \documentclass,
257% \begin{document} and \end{document} commands in this master document.
[f28fdee]258% Tip: Putting each sentence on a new line is a way to simplify later editing.
259%----------------------------------------------------------------------
260\input{existing}
261\input{features}
[7eb6eb5]262\input{implement}
263%\input{unwinding}
[f28fdee]264\input{future}
265
266%----------------------------------------------------------------------
267% END MATERIAL
268% Bibliography, Appendices, Index, etc.
269%----------------------------------------------------------------------
270
271% Bibliography
272
[1c1c180]273% The following statement selects the style to use for references.
274% It controls the sort order of the entries in the bibliography and also the
275% formatting for the in-text labels.
[f28fdee]276\bibliographystyle{plain}
[1c1c180]277% This specifies the location of the file containing the bibliographic
278% information. It assumes you're using BibTeX to manage your references (if
279% not, why not?).
280\cleardoublepage % This is needed if the "book" document class is used, to
281% place the anchor in the correct page, because the bibliography will start
282% on its own page.
283% Use \clearpage instead if the document class uses the "oneside" argument.
284\phantomsection  % With hyperref package, enables hyperlinking from the table
285% of contents to bibliography.
286% The following statement causes the title "References" to be used for the
287% bibliography section:
[f28fdee]288\renewcommand*{\bibname}{References}
289
290% Add the References to the Table of Contents
291\addcontentsline{toc}{chapter}{\textbf{References}}
292
293\bibliography{uw-ethesis,pl}
[1c1c180]294% Tip: You can create multiple .bib files to organize your references. Just
295% list them all in the \bibliogaphy command, separated by commas (no spaces).
[f28fdee]296
[1c1c180]297% The following statement causes the specified references to be added to the
298% bibliography even if they were not cited in the text. The asterisk is a
299% wildcard that causes all entries in the bibliographic database to be
300% included (optional).
[f28fdee]301% \nocite{*}
302%----------------------------------------------------------------------
303
304% Appendices
305
306% The \appendix statement indicates the beginning of the appendices.
307\appendix
[1c1c180]308% Add an un-numbered title page before the appendices and a line in the Table
309% of Contents
[f28fdee]310% \chapter*{APPENDICES}
311% \addcontentsline{toc}{chapter}{APPENDICES}
[1c1c180]312% Appendices are just more chapters, with different labeling (letters instead
313% of numbers).
[f28fdee]314% \input{appendix-matlab_plots.tex}
315
[1c1c180]316% GLOSSARIES (Lists of definitions, abbreviations, symbols, etc.
317% provided by the glossaries-extra package)
[f28fdee]318% -----------------------------
319\printglossaries
320\cleardoublepage
321\phantomsection         % allows hyperref to link to the correct page
322
323%----------------------------------------------------------------------
324\end{document} % end of logical document
Note: See TracBrowser for help on using the repository browser.