1 | \chapter{Type Environment} |
---|
2 | \label{env-chap} |
---|
3 | |
---|
4 | One key data structure for expression resolution is the \emph{type environment}. |
---|
5 | As discussed in Chapter~\ref{resolution-chap}, being able to efficiently determine which type variables are bound to which concrete types or whether two type environments are compatible is a core requirement of the resolution algorithm. |
---|
6 | Furthermore, expression resolution involves a search through many related possible solutions, so the ability to re-use shared subsets of type-environment data and to switch between environments quickly is desirable for performance. |
---|
7 | In this chapter, I discuss a number of type-environment data-structure variants, including some novel variations on the union-find \cite{Galler64} data structure introduced in this thesis. |
---|
8 | Chapter~\ref{expr-chap} contains empirical comparisons of the performance of these data structures when integrated into the resolution algorithm. |
---|
9 | |
---|
10 | \section{Definitions} \label{env-defn-sec} |
---|
11 | |
---|
12 | For purposes of this chapter, a \emph{type environment} $T$ is a set of \emph{type classes} $\myset{T_1, T_2, \cdots, T_{|T|}}$. |
---|
13 | Each type class $T_i$ contains a set of \emph{type variables} $\myset{v_{i,1}, v_{i,2}, \cdots, v_{i,|T_i|}}$. |
---|
14 | Since the type classes represent an equivalence relation over the type variables the sets of variables contained in two distinct classes in the same environment must be \emph{disjoint}. |
---|
15 | Each individual type class $T_i$ may also be associated with a \emph{bound}, $b_i$; this bound contains the \emph{bound type} that the variables in the type class are replaced with, but also includes other information in \CFACC{}, including whether type conversions are permissible on the bound type and what sort of type variables are contained in the class (data types, function types, or variadic tuples). |
---|
16 | |
---|
17 | The following example demonstrates the use of a type environment for unification: |
---|
18 | |
---|
19 | \begin{cfa} |
---|
20 | forall(otype F) F f(F, F); |
---|
21 | forall(otype G) G g(G); |
---|
22 | |
---|
23 | f( g(10), g(20) ); |
---|
24 | \end{cfa} |
---|
25 | |
---|
26 | Expression resolution starts from an empty type environment; from this empty environment, the calls to !g! can be independently resolved. |
---|
27 | These resolutions result in two new type environments, $T = \{ \myset{\mathsf{G}_1} \rightarrow$ !int!$\}$ and $T' = \{ \myset{\mathsf{G}_2} \rightarrow$ !int!$\}$; the calls to !g! have generated distinct type variables !G!$_1$ and !G!$_2$, each bound to !int! by unification with the type of its argument (!10! and !20!, both !int!). |
---|
28 | To complete resolution of the call to !f!, both environments must be combined; resolving the first argument to !f! produces a new type environment $T'' = \{ \myset{\mathsf{G}_1, \mathsf{F}_1} \rightarrow$ !int!$\}$: the new type variable !F!$_1$ has been introduced and unified with !G!$_1$ (the return type of !g(10)!), and consequently bound to !int!. |
---|
29 | To resolve the second argument to !f!, $T''$ must be checked for compatibility with $T'$; since !F!$_1$ unifies with !G!$_2$, their type classes must be merged. |
---|
30 | Since both !F!$_1$ and !G!$_2$ are bound to !int!, this merge succeeds, producing the final environment $T'' = \{ \myset{\mathsf{G}_1, \mathsf{F}_1, \mathsf{G}_2} \rightarrow$ !int!$\}$. |
---|
31 | |
---|
32 | \begin{table} |
---|
33 | \caption[Type environment operation summary]{Summary of type environment operations.} |
---|
34 | \label{env-op-table} |
---|
35 | \centering |
---|
36 | \begin{tabular}{r@{\hskip 0.25em}ll} |
---|
37 | \hline |
---|
38 | $find(T, v_{i,j})$ & $\rightarrow T_i~|~\mathsf{fail}$ & Locate class for variable \\ |
---|
39 | $report(T_i)$ & $\rightarrow \{ v_{i,j} \cdots \}$ & List variables for class \\ |
---|
40 | $bound(T_i)$ & $\rightarrow b_i~|~\mathsf{fail}$ & Get bound for class \\ |
---|
41 | $insert(T, v_{i,1})$ & & New single-variable class \\ |
---|
42 | $add(T_i, v_{i,j})$ & & Add variable to class \\ |
---|
43 | $bind(T_i, b_i)$ & & Set or update class bound \\ |
---|
44 | \hline |
---|
45 | $unify(T, T_i, T_j)$ & $\rightarrow \mathsf{pass}~|~\mathsf{fail}$ & Combine two type classes \\ |
---|
46 | $split(T, T_i)$ & $\rightarrow T'$ & Revert the last $unify$ operation on $T_i$ \\ |
---|
47 | $combine(T, T')$ & $\rightarrow \mathsf{pass}~|~\mathsf{fail}$ & Merge two environments \\ |
---|
48 | $save(T)$ & $\rightarrow H$ & Get handle for current state \\ |
---|
49 | $backtrack(T, H)$ & & Return to handle state \\ |
---|
50 | \hline |
---|
51 | \end{tabular} |
---|
52 | \end{table} |
---|
53 | |
---|
54 | Type environments in \CFACC{} need to support eleven basic operations, summarized in Table~\ref{env-op-table}. |
---|
55 | The first six operations are straightforward queries and updates on these data structures: |
---|
56 | The lookup operation $find(T, v_{i,j})$ produces $T_i$, the type class in $T$ that contains variable $v_{i,j}$, or an invalid sentinel value for no such class. |
---|
57 | The other two query operations act on type classes, where $report(T_i)$ produces the set $\myset{v_{i,1}, v_{i,2}, \cdots, v_{i,|T_i|}}$ of all type variables in a class $T_i$ and $bound(T_i)$ produces the bound $b_i$ of that class, or a sentinel indicating no bound is set. |
---|
58 | |
---|
59 | The update operation $insert(T, v_{i,1})$ creates a new type class $T_i$ in $T$ that contains only the variable $v_{i,1}$ and no bound; due to the disjointness property, $v_{i,1}$ must not belong to any other type class in $T$. |
---|
60 | The $add(T_i, v_{i,j})$ operation adds a new type variable $v_{i,j}$ to class $T_i$; again, $v_{i,j}$ cannot exist elsewhere in $T$. |
---|
61 | $bind(T_i, b_i)$ mutates the bound for a type class, setting or updating the current bound. |
---|
62 | |
---|
63 | The $unify$ operation is the fundamental non-trivial operation a type-environment data-structure must support. |
---|
64 | $unify(T, T_i, T_j)$ merges a type class $T_j$ into another $T_i$, producing a failure result and leaving $T$ in an invalid state if this merge fails. |
---|
65 | It is always possible to unify the type variables of both classes by simply taking the union of both sets; given the disjointness property, no checks for set containment are required, and the variable sets can simply be concatenated if supported by the underlying data structure. |
---|
66 | $unify$ depends on an internal $unifyBound$ operation, which may fail. |
---|
67 | In \CFACC{}, $unifyBound(b_i, b_j) \rightarrow b'_i~|~\mathsf{fail}$ checks that the type classes contain the same sort of variable, takes the tighter of the two conversion permissions, and checks if the bound types can be unified. |
---|
68 | If the bound types cannot be unified (\eg{} !struct A! with !int*!), then $unifyBound$ fails, while other combinations of bound types may result in recursive calls. |
---|
69 | For instance, unifying !R*! with !S*! for type variables !R! and !S! results in a call to $unify(T, find($!R!$), find($!S!$))$, while unifying !R*! with !int*! results in a call to $unifyBound$ on !int! and the bound type of the class containing !R!. |
---|
70 | As such, a call to $unify(T, T_i, T_j)$ may touch every type class in $T$, not just $T_i$ and $T_j$, collapsing the entirety of $T$ into a single type class in extreme cases. |
---|
71 | For more information on \CFA{} unification, see \cite{Bilson03}. |
---|
72 | The inverse of $unify$ is $split(T, T_i)$, which produces a new environment $T'$ that is the same as $T$ except that $T_i$ has been replaced by two classes corresponding to the arguments to the previous call to $unify$ on $T_i$. |
---|
73 | If there is no prior call to $unify$ on $T_i$ (\ie{} $T_i$ is a single-element class) $T_i$ is absent in $T'$. |
---|
74 | |
---|
75 | Given the nature of the expression resolution problem as a backtracking search, caching and concurrency are both useful tools to decrease runtime. |
---|
76 | However, both of these approaches may produce multiple distinct descendants of the same initial type environment, which have possibly been mutated in incompatible ways. |
---|
77 | As such, to effectively employ either caching or concurrency, the type environment data structure must support an efficient method to check if two type environments are compatible and merge them if so. |
---|
78 | $combine(T,T')$ attempts to merge an environment $T'$ into another environment $T$, producing $\mathsf{pass}$ if successful or leaving $T$ in an invalid state and producing $\mathsf{fail}$ otherwise. |
---|
79 | The invalid state of $T$ on failure is not important, given that a combination failure results in the resolution algorithm backtracking to a different environment. |
---|
80 | $combine$ proceeds by calls to $insert$, $add$, and $unify$ as needed, and can be roughly thought of as calling $unify$ on every pair of classes in $T$ that have variables $v'_{i,j}$ and $v'_{i,k}$ in the same class $T'_i$ in $T'$. |
---|
81 | Like $unify$, $combine$ can always find a mutually-consistent partition of type variables into classes (in the extreme case, all type variables from $T$ and $T'$ in a single type class), but may fail due to inconsistent bounds on merged type classes. |
---|
82 | |
---|
83 | Finally, the backtracking access patterns of the compiler can be exploited to reduce memory usage or runtime through use of an appropriately designed data structure. |
---|
84 | The set of mutations to a type environment across the execution of the resolution algorithm produce an implicit tree of related environments, and the backtracking search typically focuses only on one leaf of the tree at once, or at most a small number of closely-related nodes as arguments to $combine$. |
---|
85 | As such, the ability to save and restore particular type environment states is useful, and supported by the $save(T) \rightarrow H$ and $backtrack(T, H)$ operations, which produce a handle for the current environment state and mutate an environment back to a previous state, respectively. |
---|
86 | These operations can be naively implemented by a deep copy of $T$ into $H$ and vice versa, but have more efficient implementations in persistency-aware data structures such as the persistent union-find introduced in Section~\ref{env-persistent-union-find}. |
---|
87 | |
---|
88 | \section{Approaches} \label{env-approaches-sec} |
---|
89 | |
---|
90 | \subsection{Na\"{\i}ve} \label{naive-env-sec} |
---|
91 | |
---|
92 | The type environment data structure used in Bilson's~\cite{Bilson03} original implementation of \CFACC{} is a simple translation of the definitions in Section~\ref{env-defn-sec} to \CC{} code; a !TypeEnvironment! contains a list of !EqvClass! type equivalence classes, each of which contains the type bound information and a tree-based sorted set of type variables. |
---|
93 | This approach has the benefit of being easy to understand and not imposing life-cycle or inheritance constraints on its use, but, as can be seen in Table~\ref{env-bounds-table}, does not support many of the desired operations with any particular efficiency. |
---|
94 | Some variations on this structure may improve performance somewhat; for instance, replacing the !EqvClass! variable storage with a hash-based set reduces search and update times from $O(\log n)$ to amortized $O(1)$, while adding an index for the type variables in the entire environment removes the need to check each type class individually to maintain the disjointness property. |
---|
95 | These improvements do not change the fundamental issues with this data structure, however. |
---|
96 | |
---|
97 | \subsection{Incremental Inheritance} \label{inc-env-sec} |
---|
98 | |
---|
99 | One more invasive modification to this data structure that I investigated is to support swifter combinations of closely-related environments in the backtracking tree by storing a reference to a \emph{parent} environment within each environment, and having that environment only store type classes that have been modified with respect to the parent. |
---|
100 | This approach provides constant-time copying of environments, as a new environment simply consists of an empty list of type classes and a reference to its (logically identical) parent; since many type environments are no different than their parent, this speeds backtracking in this common case. |
---|
101 | Since all mutations made to a child environment are by definition compatible with the parent environment, two descendants of a common ancestor environment can be combined by iteratively combining the changes made in one environment, then that environment's parent, until the common ancestor is reached, again re-using storage and reducing computation in many cases. |
---|
102 | |
---|
103 | For this environment, I also employed a lazily-generated index of type variables to their containing class, which could be in either the current environment or an ancestor. |
---|
104 | Any mutation of a type class in an ancestor environment causes that class to be copied into the current environment before mutation, as well as added to the index, ensuring all local changes to the type environment are listed in its index. |
---|
105 | However, not adding type variables to the index until lookup or mutation preserves the constant-time environment copy operation in the common case in which the copy is not mutated from its parent during its life-cycle. |
---|
106 | |
---|
107 | This approach imposes some performance penalty on $combine$ if related environments are not properly linked together, as the entire environment needs to be combined rather than just the difference, but is correct as long as the ``null parent'' base-case is properly handled. |
---|
108 | The life-cycle issues are somewhat more complex, as many environments may descend from a common parent, and all of these need their parent to stay alive for purposes of lookup. |
---|
109 | These issues can be solved by ``flattening'' parent nodes into their children before the parent's scope ends, but given the tree structure of the inheritance graph it is more straightforward to store the parent nodes in reference-counted or otherwise automatically garbage-collected heap storage. |
---|
110 | |
---|
111 | \subsection{Union-Find} \label{env-union-find-approach} |
---|
112 | |
---|
113 | Given the nature of the classes of type variables as disjoint sets, another natural approach to implementing a type environment is the union-find disjoint-set data-structure~\cite{Galler64}. |
---|
114 | Union-find efficiently implements two operations over a partition of a collection of elements into disjoint sets; $find(x)$ locates the \emph{representative} of $x$, the element which canonically names its set, while $union(r, s)$ merges two sets represented by $r$ and $s$, respectively. |
---|
115 | The union-find data structure is based on providing each element with a reference to its parent element, such that the root of a tree of elements is the representative of the set of elements contained in the tree. |
---|
116 | $find$ is then implemented by a search up to the parent, generally combined with a \emph{path compression} step that links nodes more directly to their ancestors to speed up subsequent searches. |
---|
117 | $union$ involves making the representative of one set a child of the representative of the other, generally employing a rank- or size-based heuristic to ensure that the tree remains somewhat balanced. |
---|
118 | If both path compression and a balancing heuristic are employed, both $union$ and $find$ run in amortized $O(\alpha(n))$ worst-case time; this inverse Ackermann bound is a small constant for all practical values of $n$ \cite{Tarjan75}. |
---|
119 | |
---|
120 | The union-find $find$ and $union$ operations have obvious applicability to the $find$ and $unify$ type environment operations in Table~\ref{env-op-table}, but the union-find data structure must be augmented to fully implement the type environment operations. |
---|
121 | In particular, the type-class bound cannot be easily included in the union-find data structure, as the requirement to make it the class representative breaks the balancing properties of $union$, and requires too-close integration of the type environment $unifyBound$ internal operation. |
---|
122 | This issue can be solved by including a side map from class representatives to the type-class bound. |
---|
123 | If placeholder values are inserted in this map for type classes without bounds then this also has the useful property that the key set of the map provides an easily obtainable list of all the class representatives, a list which cannot be derived from the union-find data structure without a linear search for class representatives through all elements. |
---|
124 | |
---|
125 | \subsection{Union-Find with Classes} \label{env-union-find-classes-approach} |
---|
126 | |
---|
127 | Another type environment operation not supported directly by the union-find data structure is $report$, which lists the type variables in a given class, and similarly $split$, which reverts a $unify$ operation. |
---|
128 | Since the union-find data structure stores only links from children to parents and not vice-versa, there is no way to reconstruct a class from one of its elements without a linear search over the entire data structure, with $find$ called on each element to check its membership in the class. |
---|
129 | The situation is even worse for the $split$ operation, which requires extra information to maintain the order that each child is added to its parent node. |
---|
130 | Unfortunately, the literature \cite{Tarjan84,Galil91,Patwary10} on union-find does not present a way to keep references to children without breaking the asymptotic time bounds of the algorithm; I have discovered a method to do so, which, despite its simplicity, seems to be novel. |
---|
131 | |
---|
132 | The core idea of this ``union-find with classes'' data structure and algorithm is to keep the members of each class stored in a circularly-linked list. |
---|
133 | Aho, Hopcroft, and Ullman also include a circularly-linked list in their 1974 textbook~\cite{Aho74}. |
---|
134 | However, the algorithm presented by Aho~\etal{} has an entirely flat class hierarchy, where all elements are direct children of the representative, giving constant-time $find$ at the cost of linear-time $union$ operations. |
---|
135 | In my version, the list data structure does not affect the layout of the union-find tree, maintaining the same asymptotic bounds as union-find. |
---|
136 | In more detail, each element is given a !next! pointer to another element in the same class; this !next! pointer initially points to the element itself. |
---|
137 | When two classes are unified, the !next! pointers of the representatives of those classes are swapped, splicing the two circularly-linked lists together as illustrated in Figure~\ref{union-find-classes-fig}. |
---|
138 | Importantly, though this approach requires an extra pointer per element, it does maintain the linear space bound of union-find, and because it only requires updating the two root nodes in $union$ it does not asymptotically increase runtime either. |
---|
139 | The basic approach is compatible with all path-compression techniques, and allows the members of any class to be retrieved in time linear in the size of the class simply by following the !next! pointers from any element. |
---|
140 | |
---|
141 | \begin{figure} |
---|
142 | \centering |
---|
143 | \includegraphics{figures/union-find-with-classes} |
---|
144 | \caption[Union operation for union-find with classes.]{Union operation for union-find with classes. Solid lines indicate parent pointers, dashed lines are \lstinline{next} pointers.} |
---|
145 | \label{union-find-classes-fig} |
---|
146 | \end{figure} |
---|
147 | |
---|
148 | If the path-compression optimization is abandoned, union-find with classes also encodes a reversible history of all the $union$ operations applied to a given class. |
---|
149 | Theorem~\ref{env-reverse-thm} demonstrates that the !next! pointer of the representative of a class always points to a leaf from the last-added subtree. |
---|
150 | This property is sufficient to reverse the most-recent $union$ operation by finding the ancestor of that leaf that is an immediate child of the representative, breaking its parent link, and swapping the !next! pointers back\footnote{Union-by-size may be a more appropriate approach than union-by-rank in this instance, as adding two known sizes is a reversible operation, but the rank increment operation cannot be reliably reversed.}. |
---|
151 | Once the $union$ operation has been reversed, Theorem~\ref{env-reverse-thm} still holds for the reduced class, and the process can be repeated recursively until the entire set is split into its component elements. |
---|
152 | |
---|
153 | \begin{theorem} \label{env-reverse-thm} |
---|
154 | The !next! pointer of a class representative in the union-find with classes algorithm, without path compression, points to a leaf from the most-recently-added subtree. |
---|
155 | \end{theorem} |
---|
156 | |
---|
157 | \begin{proof} |
---|
158 | By induction on the height of the tree. \\ |
---|
159 | \emph{Base case:} A height 1 tree by definition includes only a single item. In such a case, the representative's !next! pointer points to itself by construction, and the representative is the most-recently-added (and only) leaf in the tree. \\ |
---|
160 | \emph{Inductive case:} By construction, a tree $T$ of height greater than 1 has children of the root (representative) node that were representative nodes of classes merged by $union$. By definition, the most-recently-added subtree $T'$ has a smaller height than $T$, thus by the inductive hypothesis before the most-recent $union$ operation, the !next! pointer of the root of $T'$ pointed to one of the leaf nodes of $T'$; by construction the !next! pointer of the root of $T$ points to this leaf after the $union$ operation. |
---|
161 | \end{proof} |
---|
162 | |
---|
163 | On its own, union-find, like the na\"{\i}ve approach, has no special constraints on life-cycle or inheritance, but it can be used as a building block in more sophisticated type environment data structures. |
---|
164 | |
---|
165 | \subsection{Persistent Union-Find} |
---|
166 | \label{env-persistent-union-find} |
---|
167 | |
---|
168 | Given the backtracking nature of the resolution algorithm discussed in Section~\ref{env-defn-sec}, the abilities to quickly switch between related versions of a type environment and to de-duplicate shared data among environments are both assets to performance. |
---|
169 | Conchon and Filli\^{a}tre~\cite{Conchon07} present a persistent union-find data structure based on the persistent array of Baker~\cite{Baker78,Baker91}. |
---|
170 | |
---|
171 | In Baker's persistent array, an \emph{array reference} contains either a pointer to the array or a pointer to an \emph{edit node}; these edit nodes contain an array index, the value in that index, and another array reference pointing either to the array or a different edit node. |
---|
172 | By construction, these array references always point to a node more like the actual array, forming a tree of edits rooted at the actual array. |
---|
173 | Reads from the actual array at the root can be performed in constant time, as with a non-persistent array. |
---|
174 | The persistent array can be mutated in constant time by directly modifying the underlying array, then replacing its array reference with an edit node containing the mutated index, the previous value at that index, and a reference to the mutated array. If the current array reference is not the root, mutation consists simply of constructing a new edit node encoding the change and referring to the current array reference. |
---|
175 | |
---|
176 | The mutation algorithm at the root is a special case of the key operation on persistent arrays, $reroot$. |
---|
177 | A rerooting operation takes any array reference and makes it the root node of the array. |
---|
178 | This operation is accomplished by tracing the path from some edit node to actual array at the root node, recursively applying the edits to the underlying array and replacing each edit node's successor with the inverse edit. |
---|
179 | In this way, any previous state of the persistent array can be restored in time proportional to the number of edits to the current state of the array. |
---|
180 | While $reroot$ does maintain the same value mapping in every version of the persistent array, the internal mutations it performs break thread-safety, and thus it must be used behind a lock in a concurrent context. |
---|
181 | Also, the root node with the actual array may in principle be anywhere in the tree, and does not provide information to report its leaf nodes, so some form of automatic garbage collection is generally required for the data structure. |
---|
182 | Since the graph of edit nodes is tree-structured, reference counting approaches suffice for garbage collection; Conchon and Filli\^{a}tre~\cite{Conchon07} also observe that if the only $reroot$ operations are for backtracking then the tail of inverse edit nodes may be elided, suggesting the possibility of stack-based memory management. |
---|
183 | |
---|
184 | While Conchon and Filli\^{a}tre~\cite{Conchon07} implement their persistent union-find data structure over a universe of integer elements in the fixed range $[1,N]$, the type environment problem needs more flexibility. |
---|
185 | In particular, an arbitrary number of type variables may be added to the environment. |
---|
186 | As such, a persistent hash table is a more suitable structure than a persistent array, providing the same expected asymptotic time bounds, while allowing a dynamic number of elements. |
---|
187 | Besides replacing the underlying array with a hash table, the other major change in this approach is to replace the two types of array references, !Array! and !Edit!, with four node types, !Table!, !Edit!, !Add!, and !Remove!, where !Add! adds a new key-value pair, !Remove! removes a key-value pair, and !Edit! mutates an existing key-value pair. |
---|
188 | In this variant of \CFACC{}, this persistent hash-table is used as the side map discussed in Section~\ref{env-union-find-approach} for class bounds. |
---|
189 | The actual union-find data structure is slightly modified from this approach, with a !Base! node containing the root union-find data structure, !Add! nodes adding new elements, !AddTo! nodes defining the union of two type classes, and !Remove! and !RemoveFrom! nodes as inverses of the previous two elements, for purposes of maintaining the edit list. |
---|
190 | Figure~\ref{persistent-union-find-fig} demonstrates the structure of a simple example. |
---|
191 | Making !AddTo! and !RemoveFrom! single nodes provides semantic information missing from the raw array updates in Conchon and Filli\^{a}tre's data structure. |
---|
192 | !RemoveFrom! is implemented using the ``leaf of last union'' approach discussed in Section~\ref{env-union-find-classes-approach}; this does, however, preclude the use of path-compression algorithms in this persistent union-find data structure. |
---|
193 | |
---|
194 | \begin{figure} |
---|
195 | \centering |
---|
196 | \includegraphics{figures/persistent-union-find} |
---|
197 | \caption[Persistent union-find data structure.]{Persistent union-find data structure. Shows the edit nodes to reverse back to an empty structure.} |
---|
198 | \label{persistent-union-find-fig} |
---|
199 | \end{figure} |
---|
200 | |
---|
201 | This added semantic information on $union$ operations in the persistent union-find edit tree exposes a new option for combining type environments. |
---|
202 | If the type environments are part of the same edit tree, one environment $T'$ can be combined with another $T$ by only testing the edits on the path from $T'$ to $T$ in both the persistent union-find data structure describing the classes and the persistent hash table containing the class bounds. |
---|
203 | This approach is generally more efficient than testing the compatibility of all type classes in $T'$, as only those that are actually different than those in $T$ must be considered. |
---|
204 | However, the improved performance comes at the cost of some flexibility, as the edit-tree link must be maintained between any two environments to be combined under this algorithm. |
---|
205 | |
---|
206 | The procedure for $combine(T, T')$ based on edit paths is as follows: |
---|
207 | The shared edit trees for classes and bindings are rerooted at $T$, and the path from $T'$ to $T$ is followed to create a list of actual edits. |
---|
208 | By tracking the state of each element, redundant changes such as an !Edit! followed by an !Edit! can be reduced to their form in $T'$ by dropping the later (more like $T$) !Edit! for the same key; !Add! and !Remove! cancel similarly. |
---|
209 | This procedure is repeated for both the class edit-tree and the binding edit-tree. |
---|
210 | When the list of net changes to the environment is produced, the additive changes are applied to $T$. |
---|
211 | For example, if a type class exists in $T'$ but not $T$, the corresponding !Add! edit is applied to $T$, but in the reverse situation the !Remove! edit is not applied to $T$, as the intention is to produce a new environment representing the union of the two sets of type classes; similarly, !AddTo! edits are applied to unify type-classes in $T$ that are united in $T'$, but !RemoveFrom! edits that split type classes are not. |
---|
212 | A new environment, $T''$, can always be constructed with a consistent partitioning of type variables; in the extreme case, all variables from both $T$ and $T'$ are united in a single type class in $T''$. |
---|
213 | $combine$ can fail to unify the bound types; if any class in $T'$ has a class bound that does not unify with the merged class in $T''$, then $combine$ fails. |
---|
214 | |
---|
215 | \section{Analysis} \label{env-analysis-sec} |
---|
216 | |
---|
217 | In this section, I present asymptotic analyses of the various approaches to the type environment data structure discussed in the previous section. |
---|
218 | My results are summarized in Table~\ref{env-bounds-table}; in all cases, $n$ is the number of type classes, $m$ is the maximum size of a type class, and $p$ the number of edits between two environments or one environment and the empty environment. |
---|
219 | $u(n)$ captures the recursive cost of class unification, which is kept separate so that the $O(n)$ number of recursive class unifications can be distinguished from the direct cost of each recursive step. |
---|
220 | |
---|
221 | \begin{table} |
---|
222 | \caption[Type environment operation bounds]{Worst-case analysis of type environment operations. $n$ is the number of type classes, $m$ the maximum size of a type class, and $p$ the edit distance between two environments or a single environment and the empty environment; $u(n)$ captures the recursive cost of class unification.} |
---|
223 | \label{env-bounds-table} |
---|
224 | \centering |
---|
225 | \begin{tabular}{rllll} |
---|
226 | \hline |
---|
227 | & \textbf{Na\"{\i}ve} & \textbf{Incremental} & \textbf{Union-Find} & \textbf{Persistent U-F} \\ |
---|
228 | \hline |
---|
229 | $find$ & $O(n)$ & $O(p)$ & $O(\alpha(m))$ & $O(\log m)$ \\ |
---|
230 | $report$ & $O(m)$ & $O(m)$ & $O(nm\alpha(m))$ & $O(m)$ \\ |
---|
231 | $bound$ & $O(1)$ & $O(1)$ & $O(1)$ & $O(1)$ \\ |
---|
232 | $insert$ & $O(1)$ & $O(1)$ & $O(1)$ & $O(1)$ \\ |
---|
233 | $add$ & $O(1)$ & $O(m)$ & $O(1)$ & $O(1)$ \\ |
---|
234 | $bind$ & $O(1)$ & $O(1)$ & $O(1)$ & $O(1)$ \\ |
---|
235 | $unify$ & $O(m + u(n))$ & $O(m + u(n))$ & $O(1 + u(n))$ & $O(1 + u(n))$ \\ |
---|
236 | $split$ & --- & --- & --- & $O(\log m)$ \\ |
---|
237 | $combine$ & $O(n^2m $ & $O(p^2m $ & $O(nm\alpha(m) $ & $O(p \log m $ \\ |
---|
238 | & $~~~+ nu(n))$ & $~~~+ pu(n))$ & $~~~+ nu(n))$ & $~~~+ pu(n))$ \\ |
---|
239 | $save$ & $O(nm)$ & $O(1)$ & $O(nm)$ & $O(1)$ \\ |
---|
240 | $backtrack$ & $O(nm)$ & $O(pm)$ & $O(nm)$ & $O(p)$ \\ |
---|
241 | \hline |
---|
242 | \end{tabular} |
---|
243 | \end{table} |
---|
244 | |
---|
245 | \subsection{Na\"{\i}ve and Incremental} |
---|
246 | \label{naive-incremental-analysis} |
---|
247 | |
---|
248 | The na\"{\i}ve type environment data structure does not have an environment-wide index for type variables, but does have an index for each type class, assumed to be hash-based here. |
---|
249 | As a result, every class's index must be consulted for a $find$ operation, at an overall cost of $O(n)$. |
---|
250 | The incremental variant builds an overall hash-based index as it is queried, but may need to recursively check its parent environments if its local index does not contain a type variable, and may have as many parents as times it has been modified, for cost $O(p)$. |
---|
251 | It should be noted that subsequent queries for the same variable execute in constant time. |
---|
252 | |
---|
253 | Since both na\"{\i}ve and incremental variants store complete type classes, the cost of a $report$ operation is simply the time needed to output the contained variables, $O(m)$. |
---|
254 | Since the type classes store their bounds, $bound$ and $bind$ are both $O(1)$ given a type class. |
---|
255 | Once a $find$ operation has already been performed to verify that a type variable does not exist in the environment, the data structures for both these variants support adding new type classes (the $insert$ operation) in $O(1)$. |
---|
256 | Adding a variable to a type class (the $add$ operation) can be done in $O(1)$ for the na\"{\i}ve implementation, but the incremental implementation may need to copy the edited type class from a parent at cost $O(m)$. |
---|
257 | |
---|
258 | The linear storage of type classes in both variants also leads to $O(m)$ time for the variable-merging step in $unify$, plus the usual $u(n)$ recursion term for $unifyBound$. |
---|
259 | The na\"{\i}ve $combine$ operation must traverse each of the classes of one environment, merging in any class of the other environment that shares a type variable. |
---|
260 | Since there are at most $n$ classes to unify, the unification cost is $O(nm + nu(n))$, while traversal and $find$ costs to locate classes to merge total $O(n^2m)$, for an overall cost of $O(n^2m + nu(n))$. |
---|
261 | The incremental $combine$ operation works similarly, but only needs to consider classes modified in either environment with respect to the common ancestor of both environments, allowing the $n$ cost terms to be substituted for $p$, for an overall cost of $O(p^2m + pu(n))$. |
---|
262 | Neither variant supports the $split$ operation to undo a $unify$. |
---|
263 | |
---|
264 | The na\"{\i}ve environment does nothing to support $save$ and $backtrack$, so these operations must be implemented by making a deep copy of the environment on $save$, then a destructive overwrite on $backtrack$, each at a cost of $O(nm)$. |
---|
265 | The incremental environment supports $O(1)$ $save$ by simply setting aside a reference to the current environment, then proceeding with a new, empty environment with the former environment as a parent. |
---|
266 | $backtrack$ to a parent environment may involve destroying all the intermediate environments if this backtrack removes the last reference to the backtracked-from environment; this cost is $O(pm)$. |
---|
267 | |
---|
268 | \subsection{Union-Find} |
---|
269 | |
---|
270 | The union-find data structure is designed to support $find$ efficiently, and thus for any variant, the cost is simply the distance up the tree to the representative element. |
---|
271 | For basic union-find, this is amortized to the inverse Ackermann function, $O(\alpha(m))$, essentially a small constant, though the loss of path compression in persistent union-find raises this cost to $O(\log m)$. |
---|
272 | Basic union-find is not designed to support the $report$ operation, however, so it must be simulated by checking the representative of every type variable, at cost $O(nm\alpha(m))$. |
---|
273 | Persistent union-find, on the other hand, uses the ``with classes'' extension to union-find described in Section~\ref{env-union-find-classes-approach} to run $report$ in $O(m)$ time. |
---|
274 | |
---|
275 | All union-find environment variants described here use a secondary hash table to map from class representatives to bindings, and as such can perform $bound$ and $bind$ in $O(1)$, given the representative. |
---|
276 | $insert$ is also a $O(1)$ operation for both basic and persistent union-find. |
---|
277 | Since $add$ simply involves attaching a new child to the class root, it is also a $O(1)$ operation for all union-find environment variants. |
---|
278 | |
---|
279 | Union-find is also designed to support $unify$ in constant time, and as such, given class representatives, the variable-merging cost of $unify$ for both variants is $O(1)$ to make one representative the child of the other, plus the $O(u(n))$ term for $unifyBound$. |
---|
280 | Basic union-find does not support $split$, but persistent union-find can accomplish it using the mechanism described in Section~\ref{env-union-find-classes-approach} in $O(\log m)$, the cost of traversing up to the root of a class from a leaf without path compression. |
---|
281 | $combine$ on the basic union-find data structure works similarly to the data structures discussed above in Section~\ref{naive-incremental-analysis}, with a $O(nu(n))$ term for the $O(n)$ underlying $unify$ operations, and a $O(n\alpha(m))$ term to find the classes which need unification by checking the class representatives of each corresponding type variable in both environments for equality. |
---|
282 | Persistent union-find uses a different approach for $combine$, discussed in Section~\ref{env-persistent-union-find}. |
---|
283 | Discounting recursive $unify$ operations included in the $u(n)$ $unifyBound$ term, there may be at most $O(p)$ $unify$ operations performed, at cost $O(pu(n))$. |
---|
284 | Each of the $O(p)$ steps on the edit path can be processed in the $O(\log m)$ time it takes to find the current representative of the modified type class, for a total runtime of $O(p \log m + pu(n))$. |
---|
285 | |
---|
286 | In terms of backtracking operations, the basic union-find data structure only supports deep copies, for $O(nm)$ cost for both $save$ and $backtrack$. |
---|
287 | Persistent union-find, as the name suggests, is more optimized, with $O(1)$ cost to $save$ a backtrack-capable reference to the current environment state, and $O(p)$ cost to revert to that state (possibly destroying no-longer-used edit nodes along the path). |
---|
288 | |
---|
289 | \section{Conclusion \& Future Work} |
---|
290 | |
---|
291 | This chapter presents the type environment abstract data type, some type-environment data-structures optimized for workloads encountered in the expression resolution problem, and asymptotic analysis of each data structure. |
---|
292 | Chapter~\ref{expr-chap} provides experimental performance results for a representative set of these approaches. |
---|
293 | One contribution of this thesis is the union-find with classes data structure for efficient retrieval of union-find class members, along with a related algorithm for reversing the history of $union$ operations in this data structure. |
---|
294 | This reversible history contributes to the second novel contribution of this chapter, a type environment data structure based off the persistent union-find data structure of Conchon and Filli\^{a}tre~\cite{Conchon07}. |
---|
295 | This persistent union-find environment uses the $split$ operation introduced in union-find with classes and the edit history of the persistent data structure to support an environment-combining algorithm that only considers the edits between the environments to be merged. |
---|
296 | |
---|
297 | This persistent union-find data structure is efficient, but not thread-safe; as suggested in Section~\ref{resn-conclusion-sec}, it may be valuable to parallelize the \CFA{} expression resolver. |
---|
298 | However, allowing multiple threads concurrent access to the persistent data structure is likely to result in ``reroot thrashing'', as different threads reroot the data structure to their own versions of interest. |
---|
299 | This contention could be mitigated by partitioning the data structure into separate subtrees for each thread, with each subtree having its own root node, and the boundaries among them implemented with a lock-equipped !ThreadBoundary! edit node. |
---|
300 | Alternatively, the concurrent hash trie of Prokopec \etal{} \cite{Prokopec11,Prokopec12} may be a useful hash-table replacement. |
---|