source: doc/theses/aaron_moss_PhD/phd/thesis.tex @ 79debb02

ADTarm-ehast-experimentalenumforall-pointer-decayjacob/cs343-translationnew-ast-unique-exprpthread-emulationqualifiedEnum
Last change on this file since 79debb02 was bd405fa, checked in by Aaron Moss <a3moss@…>, 5 years ago

thesis: final edits

  • Property mode set to 100644
File size: 7.6 KB
Line 
1% Specify the document class, default style attributes, and page dimensions
2% For hyperlinked PDF, suitable for viewing on a computer, use this:
3\documentclass[letterpaper,12pt,titlepage,oneside,final]{book}
4
5% For PDF, suitable for double-sided printing, change the PrintVersion variable below
6% to "true" and use this \documentclass line instead of the one above:
7%\documentclass[letterpaper,12pt,titlepage,openright,twoside,final]{book}
8
9% common macros for this thesis
10\input{macros}
11
12\newcommand{\href}[1]{#1} % does nothing, but defines the command so the
13% print-optimized version will ignore \href tags (redefined by hyperref pkg).
14
15% This package allows if-then-else control structures.
16\usepackage{ifthen}
17\newboolean{PrintVersion}
18\setboolean{PrintVersion}{false} 
19% CHANGE THIS VALUE TO "true" as necessary, to improve printed results for hard copies
20% by overriding some options of the hyperref package below.
21
22\usepackage{amsmath,amssymb,amstext} % Lots of math symbols and environments
23% \usepackage[pdftex]{graphicx} % For including graphics N.B. pdftex graphics driver
24\usepackage{graphicx}
25
26\usepackage{amsthm} % for theorem environment
27\newtheorem{theorem}{Theorem}
28
29\usepackage{footmisc} % for double refs to the same footnote
30
31\usepackage{caption} % for subfigure
32\usepackage{subcaption}
33
34% Hyperlinks make it very easy to navigate an electronic document.
35% In addition, this is where you should specify the thesis title
36% and author as they appear in the properties of the PDF document.
37% Use the "hyperref" package
38% N.B. HYPERREF MUST BE THE LAST PACKAGE LOADED; ADD ADDITIONAL PKGS ABOVE
39%\usepackage[pdftex,pagebackref=false]{hyperref} % with basic options\
40\usepackage[breaklinks,pagebackref=false]{hyperref}
41% N.B. pagebackref=true provides links back from the References to the body text. This can cause trouble for printing.
42
43\hypersetup{
44        plainpages=false,       % needed if Roman numbers in frontpages
45        unicode=false,          % non-Latin characters in Acrobat’s bookmarks
46        pdftoolbar=true,        % show Acrobat’s toolbar?
47        pdfmenubar=true,        % show Acrobat’s menu?
48        pdffitwindow=false,     % window fit to page when opened
49        pdfstartview={FitH},    % fits the width of the page to the window
50        pdftitle={Cforall\ Type\ System\ Implementation},    % title
51    pdfauthor={Aaron\ Moss}, % author
52    pdfsubject={Cforall}% subject
53%    pdfkeywords={keyword1} {key2} {key3}, % list of keywords, and uncomment this line if desired
54        pdfnewwindow=true,      % links in new window
55        colorlinks=true,        % false: boxed links; true: colored links
56        linkcolor=blue,         % color of internal links
57        citecolor=green,        % color of links to bibliography
58        filecolor=magenta,      % color of file links
59        urlcolor=cyan           % color of external links
60}
61\ifthenelse{\boolean{PrintVersion}}{   % for improved print quality, change some hyperref options
62\hypersetup{    % override some previously defined hyperref options
63%    colorlinks,%
64        citecolor=black,%
65        filecolor=black,%
66        linkcolor=black,%
67        urlcolor=black}
68}{} % end of ifthenelse (no else)
69
70\input{cfa-macros} % must be loaded after hyperref
71
72% \usepackage[automake,toc,abbreviations]{glossaries-extra} % Exception to the rule of hyperref being the last add-on package
73
74% Setting up the page margins...
75% uWaterloo thesis requirements specify a minimum of 1 inch (72pt) margin at the
76% top, bottom, and outside page edges and a 1.125 in. (81pt) gutter
77% margin (on binding side). While this is not an issue for electronic
78% viewing, a PDF may be printed, and so we have the same page layout for
79% both printed and electronic versions, we leave the gutter margin in.
80% Set margins to minimum permitted by uWaterloo thesis regulations:
81\setlength{\marginparwidth}{0pt} % width of margin notes
82% N.B. If margin notes are used, you must adjust \textwidth, \marginparwidth
83% and \marginparsep so that the space left between the margin notes and page
84% edge is less than 15 mm (0.6 in.)
85\setlength{\marginparsep}{0pt} % width of space between body text and margin notes
86\setlength{\evensidemargin}{0.125in} % Adds 1/8 in. to binding side of all
87% even-numbered pages when the "twoside" printing option is selected
88\setlength{\oddsidemargin}{0.125in} % Adds 1/8 in. to the left of all pages
89% when "oneside" printing is selected, and to the left of all odd-numbered
90% pages when "twoside" printing is selected
91\setlength{\textwidth}{6.375in} % assuming US letter paper (8.5 in. x 11 in.) and
92% side margins as above
93\raggedbottom
94
95% The following statement specifies the amount of space between
96% paragraphs. Other reasonable specifications are \bigskipamount and \smallskipamount.
97\setlength{\parskip}{\medskipamount}
98
99% The following statement controls the line spacing.  The default
100% spacing corresponds to good typographic conventions and only slight
101% changes (e.g., perhaps "1.2"), if any, should be made.
102\renewcommand{\baselinestretch}{1} % this is the default line space setting
103
104% By default, each chapter will start on a recto (right-hand side)
105% page.  We also force each section of the front pages to start on
106% a recto page by inserting \cleardoublepage commands.
107% In many cases, this will require that the verso page be
108% blank and, while it should be counted, a page number should not be
109% printed.  The following statements ensure a page number is not
110% printed on an otherwise blank verso page.
111\let\origdoublepage\cleardoublepage
112\newcommand{\clearemptydoublepage}{%
113  \clearpage{\pagestyle{empty}\origdoublepage}}
114\let\cleardoublepage\clearemptydoublepage
115
116%======================================================================
117%   L O G I C A L    D O C U M E N T
118%======================================================================
119\begin{document}
120
121%----------------------------------------------------------------------
122% FRONT MATERIAL
123%----------------------------------------------------------------------
124\input{frontpgs}
125
126%----------------------------------------------------------------------
127% MAIN BODY
128%----------------------------------------------------------------------
129\input{introduction}
130\input{background}
131\input{generic-types}
132\input{resolution-heuristics}
133\input{type-environment}
134\input{experiments}
135\input{conclusion}
136
137% B I B L I O G R A P H Y
138% -----------------------
139
140% The following statement selects the style to use for references.  It controls the sort order of the entries in the bibliography and also the formatting for the in-text labels.
141\bibliographystyle{plain}
142% This specifies the location of the file containing the bibliographic information. 
143% It assumes you're using BibTeX (if not, why not?).
144\cleardoublepage % This is needed if the book class is used, to place the anchor in the correct page,
145                 % because the bibliography will start on its own page.
146                 % Use \clearpage instead if the document class uses the "oneside" argument
147\phantomsection  % With hyperref package, enables hyperlinking from the table of contents to bibliography             
148% The following statement causes the title "References" to be used for the bibliography section:
149\renewcommand*{\bibname}{References}
150
151% Add the References to the Table of Contents
152\addcontentsline{toc}{chapter}{\textbf{References}}
153
154\bibliography{pl}
155% Tip 5: You can create multiple .bib files to organize your references.
156% Just list them all in the \bibliogaphy command, separated by commas (no spaces).
157
158% The following statement causes the specified references to be added to the bibliography% even if they were not
159% cited in the text. The asterisk is a wildcard that causes all entries in the bibliographic database to be included (optional).
160% \nocite{*}
161
162% APPENDICIES
163% -----------
164\appendix
165\input{generic-bench}
166
167\end{document}
Note: See TracBrowser for help on using the repository browser.