source: doc/theses/aaron_moss_PhD/phd/experiments.tex @ d065ded

aaron-thesisarm-ehcleanup-dtorsjacob/cs343-translationjenkins-sandboxnew-astnew-ast-unique-expr
Last change on this file since d065ded was d065ded, checked in by Aaron Moss <a3moss@…>, 3 years ago

thesis: polish Ch.6 to first draft

  • Property mode set to 100644
File size: 29.8 KB
Line 
1\chapter{Experiments}
2\label{expr-chap}
3
4I have implemented a prototype system to test the practical effectiveness of the various algorithms described in Chapters~\ref{resolution-chap} and~\ref{env-chap}.
5This prototype system implements the expression resolution pass of the \CFA{} compiler, \CFACC{}, with a simplified version of the \CFA{} type system and a parser to read in problem instances.
6The resolver prototype allows for quicker iteration on algorithms due to its simpler language model and lack of a requirement to generate runnable code, yet captures enough of the nuances of \CFA{} to have some predictive power for the runtime performance of algorithmic variants in \CFACC{} itself.
7I have implemented an optional \CFACC{} pass which generates test inputs for the resolver prototype from \CFA{} translation units; since at this juncture all development in \CFA{} is done by our research team, I have tested the prototype system on all \CFA{} code currently extant, primarily the standard library and compiler test suite.
8
9% There are three sources of problem instances for the resolver prototype.
10% The first is small, hand-written tests designed to test the expressive power and correctness of the prototype.
11% These tests are valuable for regression testing, but not time-consuming enough to be useful performance tests.
12% The second sort of problem instances are procedurally generated according to a set of parameters (distributions of polymorphic versus monomorphic functions, number of function arguments, number of types, \etc{}); the procedural problem generator can be used to explore the behaviour of an algorithm with respect to certain sorts of problem instances by varying the input parameters.
13% I have implemented a flagged \CFACC{} pass which outputs information which can be used to initialize the procedural generator's parameters to realistic values.
14% The final sort of problem instances are derived from actual \CFA{} code.
15% The prototype has a rich enough representation of \CFA{} that actual instances of expression resolution can be expressed with good fidelity, and I have implemented a compiler pass for \CFACC{} which can generate instances from \CFA{} code.
16% Since at this juncture all development in \CFA{} is done by our research team, I have tested the prototype system on all \CFA{} code currently extant, primarily the standard library and compiler test suite.
17
18\section{Resolver Prototype Features} \label{rp-features-sec}
19
20The resolver prototype can express most of the \CFA{} features described in Chapter~\ref{cfa-chap}.
21It supports both monomorphic and polymorphic functions, with type assertions for polymorphic functions.
22Traits are not explicitly represented, but \CFACC{} inlines traits before the resolver pass, so this is a faithful representation of the existing compiler problem.
23The prototype system supports variable declarations as well as function declarations, and has a lexical-scoping scheme and \CFA{}-like overloading rules.
24
25The type system of the resolver prototype also captures key aspects of the \CFA{} type system.
26\emph{Concrete types} represent the built-in arithmetic types of \CFA{}, along with the implicit conversions between them.
27Each concrete type is represented by an integer ID, and the conversion cost from $x$ to $y$ is $|y-x|$, a safe conversion if $y > x$, or an unsafe conversion if $y < x$.
28This is markedly simpler than the graph of conversion costs in \CFA{} (Figure~\ref{safe-conv-graph-fig}), but captures the essentials of the design well.
29For simplicity, !zero_t! and !one_t!, the types of !0! and !1!, are represented by the type corresponding to !int!.
30\emph{Named types} are analogues to \CFA{} aggregates, such as structs and unions; aggregate fields are encoded as unary functions from the struct type to the field type, named based on the field name.
31Named types also support type parameters, and as such can represent generic types as well.
32Generic named types are used to represent the built-in parameterized types of \CFA{} as well; !T*! is encoded as \texttt{\#\$ptr<T>}.
33\CFA{} arrays are also represented as pointers, to simulate array-to-pointer decay, while top-level reference types are replaced by their referent to simulate the variety of reference conversions.
34Function types have first-class representation in the prototype as the type of both function declarations and function pointers, though the function type in the prototype system loses information about type assertions, so polymorphic function pointers cannot be expressed.
35Void and tuple types are also supported in the prototype, to express the multiple-return-value functions in \CFA{}, though varargs functions and !ttype! tuple-typed type variables are absent from the prototype system.
36The prototype system also does not represent type qualifiers (\eg{} !const!, !volatile!), so all such qualifiers are stripped during conversion to the prototype system.
37
38The resolver prototype supports three sorts of expressions in its input language.
39The simplest are \emph{value expressions}, which are expressions declared to be a certain type; these implement literal expressions in \CFA{}, and, already being typed, are passed through the resolver unchanged.
40The second sort, \emph{name expressions}, represent a variable expression in \CFA{}; these contain the name of a variable or function, and are matched to an appropriate declaration overloading that name by the resolver.
41The third input expression, the \emph{function expression}, represents a call to a function, with a name and zero or more argument subexpressions.
42As is usual in \CFA{}, operators are represented as function calls; however, as mentioned above, the prototype system represents field access expressions !a.f! as function expressions as well.
43
44The main area for future expansion in the design of the resolver prototype is conversions.
45Cast expressions are implemented in the output language of the resolver, but cannot be expressed in the input.
46The only implicit conversions supported are between the arithmetic-like concrete types, which captures most, but not all, of \CFA{}'s built-in implicit conversions\footnote{Notable absences include \lstinline{void*} to other pointer types, or \lstinline{0} to pointer types.}.
47Future work should include a way to express implicit (and possibly explicit) conversions in the input language, with an investigation of the most efficient way to handle implicit conversions, and potentially a design for user-defined conversions.
48
49\section{Resolver Prototype Design}
50
51As discussed above, for speed of development the resolver prototype works over a simplified version of the \CFA{} type system.
52The build system for the resolver prototype uses a number of conditional compilation flags to switch between algorithm variants while retaining maximally shared code.
53A distinct executable name is also generated for each algorithmic variant so that distinct variants can be more easily tested against each other.
54
55The primary architectural difference between the resolver prototype and \CFACC{} is that the prototype system uses a simple mark-and-sweep garbage collector for memory management, while \CFACC{} takes a manual memory management approach.
56This decision was made for the purpose of faster development iteration, but has proved to be a significant performance benefit as well.
57\CFACC{} frequently needs to make deep clones of large object graphs to ensure memory ownership (followed by eventual deletion of these clones), an unnecessarily time-consuming process.
58The prototype, on the other hand, only needs to clone modified nodes, and can share identical subsets of the object graph.
59The key design decision enabling this is that all subnodes are held by !const! pointer, and thus cannot be mutated once they have been stored in a parent node.
60With minimal programming discipline, it can thus be ensured that any expression is either mutable or shared, but never both; the Dotty research compiler for Scala takes a similar architectural approach\cite{Dotty-github}.
61The tree mutator abstraction is designed to take advantage of this, only creating new nodes if a node must actually be mutated.
62I attempted to port this garbage collector to \CFACC{}, but without success.
63The GC could be used for memory management with few changes to the code-base, but without a substantial re-write to enforce the same ``!const! children'' discipline \CFACC{} could not take advantage of the potential to share sub-objects; without sharing of sub-objects the GC variant of \CFACC{} must do all the same allocations and deletions and garbage-collector overhead degraded performance unacceptably (though it did fix some known memory leaks introduced by failures of the existing manual memory management scheme).
64
65Another minor architectural difference between \CFACC{} and the prototype system is that \CFACC{} makes extensive use of the pointer-chasing !std::list!, !std::set!, and !std::map! data structures, while the prototype uses the array-based !std::vector! and the hash-based !unordered_! variants of !set! and !map! instead.
66Work is ongoing to port \CFACC{} to use these more efficient data structures.
67% TODO see how Thierry gets on with this
68
69The final difference between \CFACC{} and the resolver prototype is that, as an experiment in language usability, the prototype performs resolution-based rather than unification-based assertion satisfaction, as discussed in Section~\ref{resn-conclusion-sec}.
70This enables coding patterns not available in \CFACC{}, \eg{} a more flexible approach to type assertion satisfaction and better handling of functions returning polymorphic type variables that do not exist in the parameter list.
71The experimental results in Section~\ref{proto-exp-sec} indicate that this choice is not a barrier to a performant resolver.
72% \TODO{test performance; shouldn't be too hard to change \texttt{resolveAssertions} to use unification}
73
74\section{Prototype Experiments} \label{proto-exp-sec}
75
76The primary performance experiments for this thesis were conducted using the resolver prototype on problem instances generated from actual \CFA{} code using the method described in Section~\ref{rp-features-sec}.
77The prototype was compiled in 24 variants over 3 variables, with variants identified by the hyphen-separated concatenation of their short codes, \eg{} \textsc{bu-imm-bas} for bottom-up traversal, immediate assertion satisfaction, basic type environment.
78The variables and their values are as follows:
79
80\begin{description}
81        \item[Traversal direction] The order in which arguments are matched with parameters, as discussed in Section~\ref{arg-parm-matching-sec}.
82        \begin{description}
83                \item[Bottom-up] (\textsc{bu}) Baker-style bottom-up pass, searching for function candidates based on the available argument interpretations.
84                \item[Combined] (\textsc{co}) Bilson-style bottom-up pass, where argument interpretations are combined into a single interpretation for each set of options.
85                \item[Top-down] (\textsc{td}) Cormack-style top-down pass, searching for argument interpretations based on function candidate parameter types. The \textsc{td-*} variants of the resolver prototype implement a caching system to avoid re-computation of the same argument interpretation with the same type.
86        \end{description}
87        \item[Assertion satisfaction] The algorithm for finding satisfying declarations for type assertions, as discussed in Section~\ref{assn-sat-sec}.
88        \begin{description}
89                \item[Immediate] (\textsc{imm}) All assertions are checked for satisfaction immediately upon generating a candidate interpretation. The techniques discussed in Section~\ref{assn-sat-sec} for environment combination and level-by-level consideration of recursive assertions are applied here.
90                \item[Deferred] (\textsc{def}) As in \textsc{imm}, but only checks minimal-cost top-level interpretations after all top-level interpretations have been generated.
91                \item[Deferred Cached] (\textsc{dca}) As in \textsc{def}, but uses the caching optimization discussed in Section~\ref{assn-sat-sec}.
92        \end{description}
93        \item[Type Environment] The type environment data structure used, as discussed in Chapter~\ref{env-chap}.
94        \begin{description}
95                \item[Basic] (\textsc{bas}) Bilson-style type environment with hash-based equivalence class storage, as discussed in Section~\ref{naive-env-sec}.
96                \item[Incremental Inheritance] (\textsc{inc}) Incremental inheritance variant sharing unmodified common parent information between environments, as discussed in Section~\ref{inc-env-sec}.
97                \item[Persistent union-find] (\textsc{per}) Union-find-based environment, using the persistent variant discussed in Section~\ref{env-persistent-union-find} for backtracking and combination. The requirement of this type environment for common root environments for combination is incompatible with the caching used in the top-down traversal direction, and thus no \textsc{td-*-per} algorithms are tested.
98        \end{description}
99\end{description}
100
101To test the various algorithms, the resolver prototype was compiled using \texttt{g++} 6.5.0 with each of the 24 valid combinations of variables\footnote{Namely, all combinations except \textsc{td-*-per}.}, and then timed running each of the \CFA{}-derived test inputs.
102Terminal output was suppressed for all tests to avoid confounding factors in the timing results, and all tests were run three times in series, with the median result reported in all cases.
103The medians are representative data points; considering test cases that took at least 0.2~s to run, the average run was within 2\% of the reported median runtime, and no run diverged by more than 20\% of median runtime or 5.5~s.
104The memory results are even more consistent, with no run exceeding 2\% difference from median in peak resident set size, and 93\% of tests not recording any difference within the 1~KB granularity of the measurement software.
105All tests were run on a machine with 128~GB of RAM and 64 cores running at 2.2~GHz.
106
107As a matter of experimental practicality, test runs which exceeded 8~GB of peak resident memory usage were excluded from the data set.
108This is a reasonable real-world restriction, as a compiler which is merely slow may be accommodated with patience, but one which uses in excess of 8~GB of RAM may be impossible to run on many currently deployed computer systems.
109The \textsc{bu-dca-bas} and \textsc{bu-dca-per} variants were able to run all 131 test inputs to completion under this restriction, with maximum memory usage of 70~MB and 78~MB, respectively, which validates its selection as an error threshold.
110However, this threshold did eliminate a significant number of algorithm-test variants, with the worst-performing variant, \textsc{td-imm-inc}, only completing 62 test inputs within the memory bound.
111Full results for tests completed by algorithm variant are presented in Figure~\ref{tests-completed-fig}.
112
113\begin{figure}
114\centering
115\input{tests-completed}
116\caption[Tests completed for each algorithmic variant]{Number of tests completed for each algorithmic variant} \label{tests-completed-fig}
117\end{figure}
118
119As can be seen from these results, traversal direction is clearly the dominant variable in memory usage, with the \textsc{bu-*} variants performing better than the \textsc{co-*} variants, which in turn out-perform the \textsc{td-*} variants.
120It can also be seen that the incremental inheritance (\textsc{inc}) type environment consistently under-performs the other two environment data structures tested, as any efficiencies from the inheritance mechanism are apparently insufficient to pay for the added complexity of the data structure.
121
122To provide a more holistic view of performance, I have considered the results from the 56 test inputs which all algorithms are able to complete within the memory bound.
123Limiting consideration to these algorithms provides an apples-to-apples comparison between algorithms, as the excluded inputs are harder instances which take more time and memory for the algorithms which are able to solve them.
124Figures~\ref{avg-peak-mem-fig} and~\ref{avg-runtime-fig} show the mean peak memory and runtime, respectively, of each algorithm over the inputs in this data set.
125These averages are not themselves meaningful, but do enable an overall comparison of relative performance of the different variants.
126Selecting only these 56 ``easy'' test inputs does bias the average values downward, but has little effect on the relative trends; similar trends can be seen in the graphs of the \textsc{bu-*} algorithms over the 124 (of 131) test inputs which all complete, omitted to save space.
127
128\begin{figure}
129\centering
130\input{avg-peak-mem}
131\caption[Average peak memory for each algorithmic variant]{Average peak resident set size for each algorithmic variant over the 56 test inputs all variants complete.} \label{avg-peak-mem-fig}
132\end{figure}
133
134\begin{figure}
135\centering
136\input{avg-runtime}
137\caption[Average runtime for each algorithmic variant]{Average runtime for each algorithmic variant over the 56 test inputs all variants complete.} \label{avg-runtime-fig}
138\end{figure}
139
140% \begin{figure}
141% \centering
142% \input{bu-peak-mem}
143% \caption[Average peak memory for each \textsc{bu-*} variant]{Average peak resident set size for each \textsc{bu-*} variant over the 124 test inputs all \textsc{bu-*} variants complete.} \label{bu-peak-mem-fig}
144% \end{figure}
145
146% \begin{figure}
147% \centering
148% \input{bu-runtime}
149% \caption[Average runtime for each \textsc{bu-*} variant]{Average runtime for each \textsc{bu-*} variant over the 124 test inputs all \textsc{bu-*} variants complete.} \label{bu-runtime-fig}
150% \end{figure}
151
152It can be seen from these results that that the top-down, immediate assertion-satisfaction (\textsc{td-imm-*}) variants are particularly inefficient, as they check a significant number of assertions without filtering to determine if the arguments can be made to fit.
153It is also clear that the bottom-up (\textsc{bu}) traversal order is better than both top-down (\textsc{td}) and the Bilson-style bottom-up-combined ((\textsc{co})) orders.
154While the advantage of \textsc{bu} over \textsc{co} is clear, in that it performs less redundant work if a prefix of a combination fails, the advantage of \textsc{bu} over \textsc{td} provides an answer for an open question from Baker \cite{Baker82}.
155I believe that bottom-up is superior because it must only handle each subexpression once to form a list of candidate interpretations, whereas the top-down approach may do similar work repeatedly to resolve a subexpression with a variety of different types, a shortcoming that cannot be fully addressed by the memoization scheme employed in the \textsc{td} algorithm.
156
157With regard to assertion satisfaction, immediate (\textsc{imm}) satisfaction is an inferior solution, though there is little performance difference between deferred (\textsc{def}) and deferred-cached (\textsc{dca}) for instances which they can both complete; particularly notable is that \textsc{dca} caching scheme does not have a noticeable impact on peak memory usage.
158Since the \textsc{dca} algorithm can solve some particularly hard instances which \textsc{def} cannot, it is the recommended approach.
159
160The \textsc{inc} type environment also often uses upwards of double the memory required by the other variants, in addition to being consistently slower on these easy tests; aside from \textsc{bu-imm-bas} performing worse than \textsc{bu-imm-inc} on average when larger tests are considered, these results hold for the other variants.
161Aside from that, the persistent union-find (\textsc{per}) type environment generally performs better than the basic (\textsc{bas}) environment, with similar peak memory usage and an average speedup factor of nearly 2, though the requirements of the \textsc{per} environment for automatic garbage collection and a shared history for combination make retrofitting it into older code difficult.
162
163\section{Instance Difficulty} \label{instance-expr-sec}
164
165To characterize the difficulty of expression resolution problem instances, the test suites must be explored at a finer granularity.
166As discussed in Section~\ref{resn-analysis-sec}, a single top-level expression is the fundamental problem instance for resolution, yet the test inputs discussed above are composed of thousands of top-level expressions, like the actual source code they are derived from.
167To pull out the effects of these individual problems, I instrumented the resolver prototype to time resolution for each expression, and also report some relevant properties of the expression.
168This instrumented resolver was then run on a set of difficult test instances; to limit the data collection task, these runs were limited to the best-performing \textsc{bu-dca-per} algorithm and test inputs which that algorithm took more than 1~s to complete.
169
170The 13 test inputs thus selected contain 20632 top-level expressions between them, which are separated into order-of-magnitude bins by runtime in Figure~\ref{per-prob-histo-fig}.
171As can be seen from this figure, overall runtime is dominated by a few particularly difficult problem instances --- the 60\% of expressions which resolve in under 0.1~ms collectively take less time to resolve than any of the 0.2\% of expressions which take at least 100~ms to resolve.
172On the other hand, the 46 expressions in that 0.2\% take 38\% of the overall time in this difficult test suite, while the 201 expressions that take between 10 and 100~ms to resolve consume another 30\%.
173
174\begin{figure}
175        \centering
176        \input{per-prob-histo}
177        \caption[Histogram of top-level expressions]{Histogram of top-level expression resolution runtime, binned by order-of-magnitude. The left series counts the expressions in each bin according to the left axis, while the right series reports the summed runtime of resolution for all expressions in that bin. Note that both y-axes are log-scaled.} \label{per-prob-histo-fig}
178\end{figure}
179
180Since the top centile of expression resolution instances requires approximately two-thirds of the resolver's time, optimizing the resolver for specific hard problem instances has proven to be an effective technique for reducing overall runtime.
181The data indicates that number of assertions necessary to resolve has the greatest effect on runtime, as seen in
182Figure~\ref{per-prob-assns-fig}.
183However, since the number of assertions required is only known once resolution is finished, the most-promising pre-resolution metric of difficulty is the nesting depth of the expression; as seen in Figure~\ref{per-prob-depth-fig}, expressions of depth $> 10$ in this data-set are uniformly difficult.
184Figure~\ref{per-prob-subs-fig} presents a similar pattern for number of subexpressions, though given that the expensive tail of problem instances occurs at approximately twice the depth values, it is reasonable to believe that the difficult expressions in question are deeply-nested invocations of binary functions rather than wider but shallowly-nested expressions.
185
186% TODO statistics to tease out difficulty? Is ANOVA the right keyword?
187% TODO maybe metrics to sum number of poly-overloads invoked
188
189\begin{figure}
190\centering
191\input{per-prob-assns}
192\caption[Top-level expression resolution time by number of assertions resolved.]{Top-level expression resolution time by number of assertions resolved. Source input file for each expression listed in legend; note log scales on both axes.} \label{per-prob-assns-fig}
193\end{figure}
194
195\begin{figure}
196\centering
197\input{per-prob-depth}
198\caption[Top-level expression resolution time by maximum nesting depth of expression.]{Top-level expression resolution time by maximum nesting depth of expression. Note log scales on both axes.} \label{per-prob-depth-fig}
199\end{figure}
200
201\begin{figure}
202\centering
203\input{per-prob-subs}
204\caption[Top-level expression resolution time by number of subexpressions.]{Top-level expression resolution time by number of subexpressions. Note log scales on both axes.} \label{per-prob-subs-fig}
205\end{figure}
206       
207
208\section{\CFA{} Results} \label{cfa-results-sec}
209
210I have integrated most of the algorithmic techniques discussed in this chapter into \CFACC{}.
211This integration took place over a period of months while \CFACC{} was under active development on a number of other fronts, so it is not possible to completely isolate the effects of the algorithmic changes, but I believe the algorithmic changes to be the most-significant effects on performance over the study period.
212To generate this data, representative commits from the \texttt{git} history of the project were checked out and compiled, then run on the same machine used for the resolver prototype experiments discussed in Section~\ref{proto-exp-sec}.
213To negate the effects of changes to the \CFA{} standard library on the timing results, 55 test files from the test suite of the oldest \CFA{} variant were compiled with the \texttt{-E} flag to inline their library dependencies, and these inlined files were used to test the remaining \CFACC{} versions.
214
215I performed two rounds of modification to \CFACC{}; the first round moved from Bilson's original combined-bottom-up algorithm to an un-combined bottom-up algorithm, denoted \textsc{cfa-co} and \textsc{cfa-bu}, respectively.
216A top-down algorithm was not attempted in \CFACC{} due to its poor performance in the prototype.
217The second round of modifications addressed assertion satisfaction, taking Bilson's original \textsc{cfa-imm} algorithm, and iteratively modifying it, first to use the deferred approach \textsc{cfa-def}, then caching those results in the \textsc{cfa-dca} algorithm.
218The new environment data structures discussed in Section~\ref{proto-exp-sec} have not been successfully merged into \CFACC{} due to their dependencies on the garbage-collection framework in the prototype; I spent several months modifying \CFACC{} to use similar garbage collection, but due to \CFACC{} not being designed to use such memory management the performance of the modified compiler was non-viable.
219It is possible that the persistent union-find environment could be modified to use a reference-counted pointer internally without changing the entire memory-management framework of \CFACC{}, but such an attempt is left to future work.
220
221As can be seen in Figures~\ref{cfa-time-fig} and~\ref{cfa-mem-fig}, which show the time and peak memory results for these five versions of \CFACC{}, assertion resolution dominates total resolution cost, with the \textsc{cfa-def} and \textsc{cfa-dca} variants running consistently faster than the others on more expensive test cases; no difference can be seen between these two algorithms' performance, but that result agrees with the prototype experiments in Section~\ref{proto-exp-sec}.
222The results from \CFACC{} for \textsc{cfa-co} \textit{vs.}\ \textsc{cfa-bu} do not mirror those from the prototype; I conjecture this is mostly due to the different memory-management schemes and sorts of data required to run type unification and assertion satisfaction calculations, as \CFACC{} performance has proven to be particularly sensitive to the amount of heap allocation performed.
223This data also shows a noticeable regression in compiler performance in the eleven months between \textsc{cfa-bu} and \textsc{cfa-imm}, which use the same resolution algorithms; this regression is not due to expression resolution, as no integration work happened in this time, but I am unable to ascertain its actual cause.
224It should also be noted with regard to the peak memory results in Figure~\ref{cfa-mem-fig} that the peak memory usage does not always occur during the resolution phase of the compiler.
225
226\begin{figure}
227\centering
228\input{cfa-time}
229\caption[\CFACC{} runtime against \textsc{cfa-co} baseline.]{\CFACC{} runtime against \textsc{cfa-co} baseline. Note log scales on both axes.} \label{cfa-time-fig}
230\end{figure}
231
232\begin{figure}
233\centering
234\input{cfa-mem}
235\caption[\CFACC{} peak memory usage against \textsc{cfa-co} baseline runtime.]{\CFACC{} peak memory usage against \textsc{cfa-co} baseline runtime. Note log scales on both axes.} \label{cfa-mem-fig}
236\end{figure}
237
238% use Jenkins daily build logs to rebuild speedup graph with more data
239% https://cforall.uwaterloo.ca/jenkins/job/Cforall/job/master/7089/consoleText
240% - near top of file: Compiler: Architecture: etc.
241%   - if it doesn't have true for Run Benchmark, less info
242% - toward bottom, full test results
243% - be aware of machine change: grep for Ruby, Python
244% some data you collected personally for imm vs. def vs. dca variants in resolv-proto/logs/rp-bu-tec_vs_cfacc.ods
245
246% look back at Resolution Algorithms section for threads to tie up "does the algorithm look like this?"
247
248\section{Conclusion}
249
250As can be seen from the prototype results, per-expression benchmarks, and \CFACC{}, the dominant factor in the cost of \CFA{} expression resolution is assertion satisfaction.
251Reducing the number of total number of assertion satisfaction problems solved, as in the deferred satisfaction algorithm, is consistently effective at reducing runtime, and caching results of these satisfaction problems has shown promise in the prototype system.
252The results presented here also demonstrate that a bottom-up approach to expression resolution is superior to top-down, settling an open question from Baker~\cite{Baker82}.
253The persistent union-find type environment introduced in Chapter~\ref{env-chap} has also been demonstrated to be a modest performance improvement on the na\"{\i}ve approach.
254
255Given the consistently strong performance of the \textsc{bu-dca-imm} and \textsc{bu-dca-per} variants of the resolver prototype, the results in this chapter demonstrate that it is possible to develop a \CFA{} compiler with acceptable runtime performance for widespread use, an important and previously unaddressed consideration for the practical viability of the language.
256However, the less-marked improvement in Section~\ref{cfa-results-sec} from retrofitting these algorithmic changes onto the existing compiler leave the actual development of a performant \CFA{} compiler to future work.
257Characterization and elimination of the performance deficits in the existing \CFACC{} has proven difficult, though runtime is generally dominated by the expression resolution phase; as such, building a new \CFA{} compiler based on the resolver prototype contributed by this work may prove to be an effective strategy.
Note: See TracBrowser for help on using the repository browser.