source: doc/generic_types/generic_types.tex @ f32a013

aaron-thesisarm-ehcleanup-dtorsdeferred_resndemanglerenumforall-pointer-decayjacob/cs343-translationjenkins-sandboxnew-astnew-ast-unique-exprnew-envno_listpersistent-indexerpthread-emulationqualifiedEnumresolv-newwith_gc
Last change on this file since f32a013 was 41cd57c0, checked in by Aaron Moss <bruceiv@…>, 6 years ago

Finish initial integration of tuples work

  • Property mode set to 100644
File size: 61.9 KB
Line 
1% take of review (for line numbers) and anonymous (for anonymization) on submission
2\documentclass[format=acmlarge, anonymous, review]{acmart}
3
4\usepackage{listings}   % For code listings
5
6% Useful macros
7\newcommand{\CFA}{C$\mathbf\forall$} % Cforall symbolic name
8\newcommand{\CC}{\rm C\kern-.1em\hbox{+\kern-.25em+}} % C++ symbolic name
9\newcommand{\CCeleven}{\rm C\kern-.1em\hbox{+\kern-.25em+}11} % C++11 symbolic name
10\newcommand{\CCfourteen}{\rm C\kern-.1em\hbox{+\kern-.25em+}14} % C++14 symbolic name
11\newcommand{\CCseventeen}{\rm C\kern-.1em\hbox{+\kern-.25em+}17} % C++17 symbolic name
12
13\newcommand{\TODO}{\textbf{TODO}}
14\newcommand{\eg}{\textit{e}.\textit{g}.}
15\newcommand{\ie}{\textit{i}.\textit{e}.}
16\newcommand{\etc}{\textit{etc}.}
17
18% CFA programming language, based on ANSI C (with some gcc additions)
19\lstdefinelanguage{CFA}[ANSI]{C}{
20        morekeywords={_Alignas,_Alignof,__alignof,__alignof__,asm,__asm,__asm__,_At,_Atomic,__attribute,__attribute__,auto,
21                _Bool,catch,catchResume,choose,_Complex,__complex,__complex__,__const,__const__,disable,dtype,enable,__extension__,
22                fallthrough,fallthru,finally,forall,ftype,_Generic,_Imaginary,inline,__label__,lvalue,_Noreturn,one_t,otype,restrict,size_t,sized,_Static_assert,
23                _Thread_local,throw,throwResume,trait,try,typeof,__typeof,__typeof__,zero_t},
24}%
25
26\lstset{
27language=CFA,
28columns=fullflexible,
29basicstyle=\linespread{0.9}\sf,                                                 % reduce line spacing and use sanserif font
30stringstyle=\tt,                                                                                % use typewriter font
31tabsize=4,                                                                                              % 4 space tabbing
32xleftmargin=\parindent,                                                                 % indent code to paragraph indentation
33% extendedchars=true,                                                                   % allow ASCII characters in the range 128-255
34% escapechar=§,                                                                                 % LaTeX escape in CFA code §...§ (section symbol), emacs: C-q M-'
35mathescape=true,                                                                                % LaTeX math escape in CFA code $...$
36keepspaces=true,                                                                                %
37showstringspaces=false,                                                                 % do not show spaces with cup
38showlines=true,                                                                                 % show blank lines at end of code
39aboveskip=4pt,                                                                                  % spacing above/below code block
40belowskip=3pt,
41% replace/adjust listing characters that look bad in sanserif
42literate={-}{\raisebox{-0.15ex}{\texttt{-}}}1 {^}{\raisebox{0.6ex}{$\scriptscriptstyle\land\,$}}1
43        {~}{\raisebox{0.3ex}{$\scriptstyle\sim\,$}}1 {_}{\makebox[1.2ex][c]{\rule{1ex}{0.1ex}}}1 {`}{\ttfamily\upshape\hspace*{-0.1ex}`}1
44        {<-}{$\leftarrow$}2 {=>}{$\Rightarrow$}2 {->}{$\rightarrow$}2,
45% moredelim=**[is][\color{red}]{®}{®},                                  % red highlighting ®...® (registered trademark symbol) emacs: C-q M-.
46% moredelim=**[is][\color{blue}]{ß}{ß},                                 % blue highlighting ß...ß (sharp s symbol) emacs: C-q M-_
47% moredelim=**[is][\color{OliveGreen}]{¢}{¢},                   % green highlighting ¢...¢ (cent symbol) emacs: C-q M-"
48% moredelim=[is][\lstset{keywords={}}]{¶}{¶},                   % keyword escape ¶...¶ (pilcrow symbol) emacs: C-q M-^
49}% lstset
50
51% inline code @...@
52\lstMakeShortInline@
53
54% ACM Information
55\citestyle{acmauthoryear}
56
57\acmJournal{PACMPL}
58
59\title{Generic and Tuple Types with Efficient Dynamic Layout in \CFA{}}
60
61\author{Aaron Moss}
62\affiliation{%
63        \institution{University of Waterloo}
64        \department{David R. Cheriton School of Computer Science}
65        \streetaddress{Davis Centre, University of Waterloo}
66        \city{Waterloo}
67        \state{ON}
68        \postcode{N2L 3G1}
69        \country{Canada}
70}
71\email{a3moss@uwaterloo.ca}
72
73\author{Robert Schluntz}
74\affiliation{%
75        \institution{University of Waterloo}
76        \department{David R. Cheriton School of Computer Science}
77        \streetaddress{Davis Centre, University of Waterloo}
78        \city{Waterloo}
79        \state{ON}
80        \postcode{N2L 3G1}
81        \country{Canada}
82}
83\email{rschlunt@uwaterloo.ca}
84
85\author{Peter Buhr}
86\affiliation{%
87        \institution{University of Waterloo}
88        \department{David R. Cheriton School of Computer Science}
89        \streetaddress{Davis Centre, University of Waterloo}
90        \city{Waterloo}
91        \state{ON}
92        \postcode{N2L 3G1}
93        \country{Canada}
94}
95\email{pabuhr@uwaterloo.ca}
96
97\terms{generic, tuple, types}
98\keywords{generic types, tuple types, polymorphic functions, C, Cforall}
99
100\begin{CCSXML}
101<ccs2012>
102<concept>
103<concept_id>10011007.10011006.10011008.10011024.10011025</concept_id>
104<concept_desc>Software and its engineering~Polymorphism</concept_desc>
105<concept_significance>500</concept_significance>
106</concept>
107<concept>
108<concept_id>10011007.10011006.10011008.10011024.10011028</concept_id>
109<concept_desc>Software and its engineering~Data types and structures</concept_desc>
110<concept_significance>500</concept_significance>
111</concept>
112<concept>
113<concept_id>10011007.10011006.10011041.10011047</concept_id>
114<concept_desc>Software and its engineering~Source code generation</concept_desc>
115<concept_significance>300</concept_significance>
116</concept>
117</ccs2012>
118\end{CCSXML}
119
120\ccsdesc[500]{Software and its engineering~Polymorphism}
121\ccsdesc[500]{Software and its engineering~Data types and structures}
122\ccsdesc[300]{Software and its engineering~Source code generation}
123
124\begin{abstract}
125\TODO{} Write abstract.
126\end{abstract}
127
128\begin{document}
129
130\maketitle
131
132\section{Introduction \& Background}
133
134\CFA{}\footnote{Pronounced ``C-for-all'', and written \CFA{} or Cforall.} is an evolutionary extension of the C programming language which aims to add modern language features to C while maintaining both source compatibility with C and a familiar mental model for programmers. Four key design goals were set out in the original design of \CFA{} \citep{Bilson03}:
135\begin{enumerate}
136\item The behaviour of standard C code must remain the same when translated by a \CFA{} compiler as when translated by a C compiler.
137\item Standard C code must be as fast and as small when translated by a \CFA{} compiler as when translated by a C compiler.
138\item \CFA{} code must be at least as portable as standard C code.
139\item Extensions introduced by \CFA{} must be translated in the most efficient way possible.
140\end{enumerate}
141The purpose of these goals is to ensure that existing C codebases can be converted to \CFA{} incrementally and with minimal effort, and that programmers who already know C can productively produce \CFA{} code without extensive training beyond the extension features they wish to employ. In its current implementation, \CFA{} is compiled by translating it to GCC-dialect C, allowing it to leverage the portability and code optimizations provided by GCC, meeting goals (1)-(3).
142
143\CFA{} has been previously extended with polymorphic functions and name overloading (including operator overloading) \citep{Bilson03}, and deterministically-executed constructors and destructors \citep{Schluntz17}. This paper describes how generic and tuple types are designed and implemented in \CFA{} in accordance with both the backward compatibility goals and existing features described above.
144
145\subsection{Polymorphic Functions}
146\label{sec:poly-fns}
147
148\CFA{}'s polymorphism was originally formalized by \citet{Ditchfield92}, and first implemented by \citet{Bilson03}. The signature feature of \CFA{} is parametric-polymorphic functions; such functions are written using a @forall@ clause (which gives the language its name):
149\begin{lstlisting}
150forall(otype T)
151T identity(T x) {
152    return x;
153}
154
155int forty_two = identity(42); // T is bound to int, forty_two == 42
156\end{lstlisting}
157The @identity@ function above can be applied to any complete object type (or ``@otype@''). The type variable @T@ is transformed into a set of additional implicit parameters to @identity@, which encode sufficient information about @T@ to create and return a variable of that type. The \CFA{} implementation passes the size and alignment of the type represented by an @otype@ parameter, as well as an assignment operator, constructor, copy constructor and destructor. If this extra information is not needed, the type parameter can be declared as @dtype T@, where @dtype@ is short for ``data type''.
158
159Here, the runtime cost of polymorphism is spread over each polymorphic call, due to passing more arguments to polymorphic functions; preliminary experiments have shown this overhead to be similar to \CC{} virtual function calls. An advantage of this design is that, unlike \CC{} template functions, \CFA{} @forall@ functions are compatible with separate compilation.
160
161Since bare polymorphic types do not provide a great range of available operations, \CFA{} provides a \emph{type assertion} mechanism to provide further information about a type:
162\begin{lstlisting}
163forall(otype T | { T twice(T); })
164T four_times(T x) {
165    return twice( twice(x) );
166}
167
168double twice(double d) { return d * 2.0; } // (1)
169
170double magic = four_times(10.5); // T is bound to double, uses (1) to satisfy type assertion
171\end{lstlisting}
172These type assertions may be either variable or function declarations that depend on a polymorphic type variable. @four_times@ can only be called with an argument for which there exists a function named @twice@ that can take that argument and return another value of the same type; a pointer to the appropriate @twice@ function is passed as an additional implicit parameter to the call of @four_times@.
173
174Monomorphic specializations of polymorphic functions can themselves be used to satisfy type assertions. For instance, @twice@ could have been defined using the \CFA{} syntax for operator overloading as:
175\begin{lstlisting}
176forall(otype S | { S ?+?(S, S); })
177S twice(S x) { return x + x; }  // (2)
178\end{lstlisting} 
179This version of @twice@ works for any type @S@ that has an addition operator defined for it, and it could have been used to satisfy the type assertion on @four_times@.
180The translator accomplishes this by creating a wrapper function calling @twice // (2)@ with @S@ bound to @double@, then providing this wrapper function to @four_times@\footnote{\lstinline@twice // (2)@ could also have had a type parameter named \lstinline@T@; \CFA{} specifies renaming of the type parameters, which would avoid the name conflict with the type variable \lstinline@T@ of \lstinline@four_times@.}.
181
182\subsection{Traits}
183
184\CFA{} provides \emph{traits} as a means to name a group of type assertions, as in the example below:
185\begin{lstlisting}
186trait has_magnitude(otype T) {
187    bool ?<?(T, T);  // comparison operator for T
188    T -?(T);  // negation operator for T
189    void ?{}(T*, zero_t);  // constructor from 0 literal
190};
191
192forall(otype M | has_magnitude(M))
193M abs( M m ) {
194    M zero = { 0 };  // uses zero_t constructor from trait
195    return m < zero ? -m : m;
196}
197
198forall(otype M | has_magnitude(M))
199M max_magnitude( M a, M b ) {
200    return abs(a) < abs(b) ? b : a;
201}
202\end{lstlisting}
203This capability allows specifying the same set of assertions in multiple locations, without the repetition and likelihood of mistakes that come with manually writing them out for each function declaration.
204
205@otype@ is essentially syntactic sugar for the following trait:
206\begin{lstlisting}
207trait otype(dtype T | sized(T)) {
208        // sized is a compiler-provided pseudo-trait for types with known size & alignment
209        void ?{}(T*);  // default constructor
210        void ?{}(T*, T);  // copy constructor
211        void ?=?(T*, T);  // assignment operator
212        void ^?{}(T*);  // destructor
213};
214\end{lstlisting}
215Given this information, variables of polymorphic type can be treated as if they were a complete struct type -- they can be stack-allocated using the @alloca@ compiler builtin, default or copy-initialized, assigned, and deleted. As an example, the @abs@ function above would produce generated code something like the following (simplified for clarity and brevity):
216\begin{lstlisting}
217void abs( size_t _sizeof_M, size_t _alignof_M,
218                void (*_ctor_M)(void*), void (*_copy_M)(void*, void*),
219                void (*_assign_M)(void*, void*), void (*_dtor_M)(void*),
220                bool (*_lt_M)(void*, void*), void (*_neg_M)(void*, void*),
221        void (*_ctor_M_zero)(void*, int),
222                void* m, void* _rtn ) {  // polymorphic parameter and return passed as void*
223        // M zero = { 0 };
224        void* zero = alloca(_sizeof_M);  // stack allocate 0 temporary
225        _ctor_M_zero(zero, 0);  // initialize using zero_t constructor
226        // return m < zero ? -m : m;
227        void *_tmp = alloca(_sizeof_M)
228        _copy_M( _rtn,  // copy-initialize return value
229                _lt_M( m, zero ) ?  // check condition
230                 (_neg_M(m, _tmp), _tmp) :  // negate m
231                 m);
232        _dtor_M(_tmp); _dtor_M(zero);  // destroy temporaries
233}
234\end{lstlisting}
235
236Semantically, traits are simply a named lists of type assertions, but they may be used for many of the same purposes that interfaces in Java or abstract base classes in \CC{} are used for. Unlike Java interfaces or \CC{} base classes, \CFA{} types do not explicitly state any inheritance relationship to traits they satisfy; this can be considered a form of structural inheritance, similar to implementation of an interface in Go, as opposed to the nominal inheritance model of Java and \CC{}. Nominal inheritance can be simulated with traits using marker variables or functions:
237\begin{lstlisting}
238trait nominal(otype T) {
239    T is_nominal;
240};
241
242int is_nominal;  // int now satisfies the nominal trait
243{
244    char is_nominal; // char satisfies the nominal trait
245}
246// char no longer satisfies the nominal trait here 
247\end{lstlisting}
248
249Traits, however, are significantly more powerful than nominal-inheritance interfaces; firstly, due to the scoping rules of the declarations that satisfy a trait's type assertions, a type may not satisfy a trait everywhere that the type is declared, as with @char@ and the @nominal@ trait above. Secondly, traits may be used to declare a relationship among multiple types, a property that may be difficult or impossible to represent in nominal-inheritance type systems:
250\begin{lstlisting}
251trait pointer_like(otype Ptr, otype El) {
252    lvalue El *?(Ptr); // Ptr can be dereferenced into a modifiable value of type El
253}
254
255struct list {
256    int value;
257    list *next;  // may omit "struct" on type names
258};
259
260typedef list *list_iterator;
261
262lvalue int *?( list_iterator it ) {
263    return it->value;
264}
265\end{lstlisting}
266
267In the example above, @(list_iterator, int)@ satisfies @pointer_like@ by the user-defined dereference function, and @(list_iterator, list)@ also satisfies @pointer_like@ by the built-in dereference operator for pointers. Given a declaration @list_iterator it@, @*it@ can be either an @int@ or a @list@, with the meaning disambiguated by context (\eg, @int x = *it;@ interprets @*it@ as an @int@, while @(*it).value = 42;@ interprets @*it@ as a @list@).
268While a nominal-inheritance system with associated types could model one of those two relationships by making @El@ an associated type of @Ptr@ in the @pointer_like@ implementation, few such systems could model both relationships simultaneously.
269
270\section{Generic Types}
271
272One of the known shortcomings of standard C is that it does not provide reusable type-safe abstractions for generic data structures and algorithms. Broadly speaking, there are three approaches to create data structures in C. One approach is to write bespoke data structures for each context in which they are needed. While this approach is flexible and supports integration with the C type-checker and tooling, it is also tedious and error-prone, especially for data structures more complicated than a singly-linked list. A second approach is to use @void*@-based polymorphism. This approach is taken by the C standard library functions @qsort@ and @bsearch@, and does allow the use of common code for common functionality. However, basing all polymorphism on @void*@ eliminates the type-checker's ability to ensure that argument types are properly matched, as well as adding pointer indirection and dynamic allocation to algorithms and data structures which would not otherwise require them. A third approach to generic code is to use pre-processor macros to generate it -- this approach does allow the generated code to be both generic and type-checked, though any errors produced may be difficult to read. Furthermore, writing and invoking C code as preprocessor macros is unnatural and somewhat inflexible.
273
274Other C-like languages such as \CC{} and Java use \emph{generic types} to produce type-safe abstract data types. The \CFA{} team has chosen to implement generic types as well, with the constraints that the generic types design for \CFA{} must integrate efficiently and naturally with the existing polymorphic functions in \CFA{}, while retaining backwards compatibility with C; maintaining separate compilation is a particularly important constraint on the design. However, where the concrete parameters of the generic type are known, there should not be extra overhead for the use of a generic type.
275
276A generic type can be declared by placing a @forall@ specifier on a @struct@ or @union@ declaration, and instantiated using a parenthesized list of types after the type name:
277\begin{lstlisting}
278forall(otype R, otype S) struct pair {
279    R first;
280    S second;
281};
282
283forall(otype T)
284T value( pair(const char*, T) p ) { return p.second; }
285
286forall(dtype F, otype T)
287T value_p( pair(F*, T*) p ) { return *p.second; }
288
289pair(const char*, int) p = { "magic", 42 };
290int magic = value( p );
291
292pair(void*, int*) q = { 0, &p.second };
293magic = value_p( q );
294double d = 1.0;
295pair(double*, double*) r = { &d, &d };
296d = value_p( r );
297\end{lstlisting}
298
299\CFA{} classifies generic types as either \emph{concrete} or \emph{dynamic}. Dynamic generic types vary in their in-memory layout depending on their type parameters, while concrete generic types have a fixed memory layout regardless of type parameters. A type may have polymorphic parameters but still be concrete; \CFA{} refers to such types as \emph{dtype-static}. Polymorphic pointers are an example of dtype-static types -- @forall(dtype T) T*@ is a polymorphic type, but for any @T@ chosen, @T*@ will have exactly the same in-memory representation as a @void*@, and can therefore be represented by a @void*@ in code generation.
300
301\subsection{Concrete Generic Types}
302
303The \CFA{} translator instantiates concrete generic types by template-expanding them to fresh struct types; concrete generic types can therefore be used with zero runtime overhead. To enable interoperation between equivalent instantiations of a generic type, the translator saves the set of instantiations currently in scope and re-uses the generated struct declarations where appropriate. As an example, the concrete instantiation for @pair(const char*, int)@ would look something like this:
304\begin{lstlisting}
305struct _pair_conc1 {
306        const char* first;
307        int second;
308};
309\end{lstlisting}
310
311A concrete generic type with dtype-static parameters is also expanded to a struct type, but this struct type is used for all matching instantiations. In the example above, the @pair(F*, T*)@ parameter to @value_p@ is such a type; its expansion would look something like this, and be used as the type of the variables @q@ and @r@ as well, with casts for member access where appropriate:
312\begin{lstlisting}
313struct _pair_conc0 {
314        void* first;
315        void* second;
316};
317\end{lstlisting}
318
319\subsection{Dynamic Generic Types}
320
321Though \CFA{} implements concrete generic types efficiently, it also has a fully-general system for computing with dynamic generic types. As mentioned in Section~\ref{sec:poly-fns}, @otype@ function parameters (in fact all @sized@ polymorphic parameters) come with implicit size and alignment parameters provided by the caller. Dynamic generic structs also come with an \emph{offset array} which contains the offsets of each member of the struct\footnote{Dynamic generic unions need no such offset array, as all members are at offset 0.}. Access to members\footnote{The \lstinline@offsetof@ macro is implmented similarly.} of a dynamic generic struct is provided by adding the corresponding member of the offset array to the struct pointer at runtime, essentially moving a compile-time offset calculation to runtime where neccessary.
322
323These offset arrays are staticly generated where possible. If a dynamic generic type is declared to be passed or returned by value from a polymorphic function, the translator can safely assume that the generic type is complete (that is, has a known layout) at any call-site, and the offset array is passed from the caller; if the generic type is concrete at the call site this offset array can even be statically generated using the C @offsetof@ macro. As an example, @p.second@ in the @value@ function above is implemented as @*(p + _offsetof_pair[1])@, where @p@ is a @void*@, and @_offsetof_pair@ is the offset array passed in to @value@ for @pair(const char*, T)@. The offset array @_offsetof_pair@ is generated at the call site as @size_t _offsetof_pair[] = { offsetof(_pair_conc1, first), offsetof(_pair_conc1, second) };@.
324
325In some cases the offset arrays cannot be staticly generated. For instance, modularity is generally produced in C by including an opaque forward-declaration of a struct and associated accessor and mutator routines in a header file, with the actual implementations in a separately-compiled \texttt{.c} file. \CFA{} supports this pattern for generic types, and in tis instance the caller does not know the actual layout or size of the dynamic generic type, and only holds it by pointer. The \CFA{} translator automatically generates \emph{layout functions} for cases where the size, alignment, and offset array of a generic struct cannot be passed in to a function from that function's caller. These layout functions take as arguments pointers to size and alignment variables and a caller-allocated array of member offsets, as well as the size and alignment of all @sized@ parameters to the generic struct (un-@sized@ parameters are forbidden from the language from being used in a context which affects layout). Results of these layout functions are cached so that they are only computed once per type per function.%, as in the example below for @pair@.
326% \begin{lstlisting}
327% static inline void _layoutof_pair(size_t* _szeof_pair, size_t* _alignof_pair, size_t* _offsetof_pair,
328%               size_t _szeof_R, size_t _alignof_R, size_t _szeof_S, size_t _alignof_S) {
329%     *_szeof_pair = 0; // default values
330%     *_alignof_pair = 1;
331
332%       // add offset, size, and alignment of first field
333%     _offsetof_pair[0] = *_szeof_pair;
334%     *_szeof_pair += _szeof_R;
335%     if ( *_alignof_pair < _alignof_R ) *_alignof_pair = _alignof_R;
336       
337%       // padding, offset, size, and alignment of second field
338%     if ( *_szeof_pair & (_alignof_S - 1) )
339%               *_szeof_pair += (_alignof_S - ( *_szeof_pair & (_alignof_S - 1) ) );
340%     _offsetof_pair[1] = *_szeof_pair;
341%     *_szeof_pair += _szeof_S;
342%     if ( *_alignof_pair < _alignof_S ) *_alignof_pair = _alignof_S;
343
344%       // pad to struct alignment
345%     if ( *_szeof_pair & (*_alignof_pair - 1) )
346%               *_szeof_pair += ( *_alignof_pair - ( *_szeof_pair & (*_alignof_pair - 1) ) );
347% }
348% \end{lstlisting}
349
350Layout functions also allow generic types to be used in a function definition without reflecting them in the function signature. For instance, a function that strips duplicate values from an unsorted @vector(T)@ would likely have a pointer to the vector as its only explicit parameter, but internally may use some sort of @set(T)@ to test for duplicate values. This function could acquire the layout for @set(T)@ by calling its layout function with the layout of @T@ implicitly passed into the function.
351
352Whether a type is concrete, dtype-static, or dynamic is decided based solely on the type parameters and @forall@ clause on the struct declaration. This allows opaque forward declarations of generic types like @forall(otype T) struct Box;@ -- like in C, all uses of @Box(T)@ can be in a separately compiled translation unit, and callers from other translation units will know the proper calling conventions to use. If the definition of a struct type was included in the determination of dynamic or concrete, some further types may be recognized as dtype-static (\eg, @forall(otype T) struct unique_ptr { T* p };@ does not depend on @T@ for its layout, but the existence of an @otype@ parameter means that it \emph{could}.), but preserving separate compilation (and the associated C compatibility) in this way is judged to be an appropriate trade-off.
353
354\subsection{Applications}
355
356The re-use of dtype-static struct instantiations enables some useful programming patterns at zero runtime cost. The most important such pattern is using @forall(dtype T) T*@ as a type-checked replacement for @void*@, as in this example, which takes a @qsort@ or @bsearch@-compatible comparison routine and creates a similar lexicographic comparison for pairs of pointers:
357\begin{lstlisting}
358forall(dtype T)
359int lexcmp( pair(T*, T*)* a, pair(T*, T*)* b, int (*cmp)(T*, T*) ) {
360        int c = cmp(a->first, b->first);
361        if ( c == 0 ) c = cmp(a->second, b->second);
362        return c;
363}
364\end{lstlisting}
365Since @pair(T*, T*)@ is a concrete type, there are no added implicit parameters to @lexcmp@, so the code generated by \CFA{} will be effectively identical to a version of this written in standard C using @void*@, yet the \CFA{} version will be type-checked to ensure that the fields of both pairs and the arguments to the comparison function match in type.
366
367Another useful pattern enabled by re-used dtype-static type instantiations is zero-cost ``tag'' structs. Sometimes a particular bit of information is only useful for type-checking, and can be omitted at runtime. Tag structs can be used to provide this information to the compiler without further runtime overhead, as in the following example:
368\begin{lstlisting}
369forall(dtype Unit) struct scalar { unsigned long value; };
370
371struct metres {};
372struct litres {};
373
374forall(dtype U)
375scalar(U) ?+?(scalar(U) a, scalar(U) b) {
376        return (scalar(U)){ a.value + b.value };
377}
378
379scalar(metres) half_marathon = { 21093 };
380scalar(litres) swimming_pool = { 2500000 };
381
382scalar(metres) marathon = half_marathon + half_marathon;
383scalar(litres) two_pools = swimming_pool + swimming_pool;
384marathon + swimming_pool; // ERROR -- caught by compiler
385\end{lstlisting}
386@scalar@ is a dtype-static type, so all uses of it will use a single struct definition, containing only a single @unsigned long@, and can share the same implementations of common routines like @?+?@ -- these implementations may even be separately compiled, unlike \CC{} template functions. However, the \CFA{} type-checker will ensure that matching types are used by all calls to @?+?@, preventing nonsensical computations like adding the length of a marathon to the volume of an olympic pool.
387
388\section{Tuples}
389
390The @pair(R, S)@ generic type used as an example in the previous section can be considered a special case of a more general \emph{tuple} data structure. The authors have implemented tuples in \CFA{} as an extension to C. The \CFA{} tuple design is particularly motivated by two use cases: \emph{multiple-return-value functions} and \emph{variadic functions}.
391
392In standard C, functions can return at most one value. This restriction results in code which emulates functions with multiple return values by \emph{aggregation} or by \emph{aliasing}. In the former situation, the function designer creates a record type that combines all of the return values into a single type. Of note, the designer must come up with a name for the return type and for each of its fields. Unnecessary naming is a common programming language issue, introducing verbosity and a complication of the user's mental model. As such, this technique is effective when used sparingly, but can quickly get out of hand if many functions need to return different combinations of types. In the latter approach, the designer simulates multiple return values by passing the additional return values as pointer parameters. The pointer parameters are assigned inside of the routine body to emulate a return. Notably, using this approach, the caller is directly responsible for allocating storage for the additional temporary return values. This complicates the call site with a sequence of variable declarations leading up to the call. Also, while a disciplined use of @const@ can give clues about whether a pointer parameter is going to be used as an out parameter, it is not immediately obvious from only the routine signature whether the callee expects such a parameter to be initialized before the call. Furthermore, while many C routines that accept pointers are designed so that it is safe to pass @NULL@ as a parameter, there are many C routines that are not null-safe. On a related note, C does not provide a standard mechanism to state that a parameter is going to be used as an additional return value, which makes the job of ensuring that a value is returned more difficult for the compiler.
393
394C does provide a mechanism for variadic functions through manipulation of @va_list@ objects, but it is notoriously not type-safe. A variadic function is one which contains at least one parameter, followed by @...@ as the last token in the parameter list. In particular, some form of \emph{argument descriptor} is needed to inform the function of the number of arguments and their types, commonly a format string or counter parameter. It is important to note that both of these mechanisms are inherently redundant, because they require the user to specify information that the compiler knows explicitly. This required repetition is error prone, because it is easy for the user to add or remove arguments without updating the argument descriptor. In addition, C requires the programmer to hard code all of the possible expected types. As a result, it is cumbersome to write a variadic function that is open to extension. For example, consider a simple function which sums $N$ @int@s:
395\begin{lstlisting}
396int sum(int N, ...) {
397  va_list args;
398  va_start(args, N);  // must manually specify last non-variadic argument
399  int ret = 0;
400  while(N) {
401    ret += va_arg(args, int);  // must specify type
402    N--;
403  }
404  va_end(args);
405  return ret;
406}
407sum(3, 10, 20, 30);  // must keep initial counter argument in sync
408\end{lstlisting}
409
410The @va_list@ type is a special C data type that abstracts variadic argument manipulation. The @va_start@ macro initializes a @va_list@, given the last named parameter. Each use of the @va_arg@ macro allows access to the next variadic argument, given a type. Since the function signature does not provide any information on what types can be passed to a variadic function, the compiler does not perform any error checks on a variadic call. As such, it is possible to pass any value to the @sum@ function, including pointers, floating-point numbers, and structures. In the case where the provided type is not compatible with the argument's actual type after default argument promotions, or if too many arguments are accessed, the behaviour is undefined \citep{C11}. Furthermore, there is no way to perform the necessary error checks in the @sum@ function at run-time, since type information is not carried into the function body. Since they rely on programmer convention rather than compile-time checks, variadic functions are generally unsafe.
411
412In practice, compilers can provide warnings to help mitigate some of the problems. For example, GCC provides the @format@ attribute to specify that a function uses a format string, which allows the compiler to perform some checks related to the standard format specifiers. Unfortunately, this does not permit extensions to the format string syntax, so a programmer cannot extend the attribute to warn for mismatches with custom types.
413
414\subsection{Tuple Expressions}
415
416The tuple extensions in \CFA{} can express multiple return values and variadic function parameters in an efficient and type-safe manner. \CFA{} introduces \emph{tuple expressions} and \emph{tuple types}. A tuple expression is an expression producing a fixed-size, ordered list of values of heterogeneous types. The type of a tuple expression is the tuple of the subexpression types, or a \emph{tuple type}. In \CFA{}, a tuple expression is denoted by a comma-separated list of expressions enclosed in square brackets. For example, the expression @[5, 'x', 10.5]@ has type @[int, char, double]@. The previous expression has three \emph{components}. Each component in a tuple expression can be any \CFA{} expression, including another tuple expression. The order of evaluation of the components in a tuple expression is unspecified, to allow a compiler the greatest flexibility for program optimization. It is, however, guaranteed that each component of a tuple expression is evaluated for side-effects, even if the result is not used. Multiple-return-value functions can equivalently be called \emph{tuple-returning functions}.
417
418\CFA{} allows declaration of \emph{tuple variables}, variables of tuple type. For example:
419\begin{lstlisting}
420[int, char] most_frequent(const char*);
421
422const char* str = "hello, world!";
423[int, char] freq = most_frequent(str);
424printf("%s -- %d %c\n", str, freq);
425\end{lstlisting}
426In this example, the type of the @freq@ and the return type of @most_frequent@ are both tuple types. Also of note is how the tuple expression @freq@ is implicitly flattened into separate @int@ and @char@ arguments to @printf@; this code snippet could have been shortened by replacing the last two lines with @printf("%s -- %d %c\n", str, most_frequent(str));@ using exactly the same mechanism.
427
428In addition to variables of tuple type, it is also possible to have pointers to tuples, and arrays of tuples. Tuple types can be composed of any types, except for array types, since arrays are not of fixed size, which makes tuple assignment difficult when a tuple contains an array.
429\begin{lstlisting}
430[double, int] di;
431[double, int] * pdi
432[double, int] adi[10];
433\end{lstlisting}
434This examples declares a variable of type @[double, int]@, a variable of type pointer to @[double, int]@, and an array of ten @[double, int]@.
435
436\subsection{Flattening and Restructuring}
437
438In function call contexts, tuples support implicit flattening and restructuring conversions. Tuple flattening recursively expands a tuple into the list of its basic components. Tuple structuring packages a list of expressions into a value of tuple type.
439\begin{lstlisting}
440int f(int, int);
441int g([int, int]);
442int h(int, [int, int]);
443[int, int] x;
444int y;
445
446f(x);      // flatten
447g(y, 10);  // structure
448h(x, y);   // flatten & structure
449\end{lstlisting}
450In \CFA{}, each of these calls is valid. In the call to @f@, @x@ is implicitly flattened so that the components of @x@ are passed as the two arguments to @f@. For the call to @g@, the values @y@ and @10@ are structured into a single argument of type @[int, int]@ to match the type of the parameter of @g@. Finally, in the call to @h@, @y@ is flattened to yield an argument list of length 3, of which the first component of @x@ is passed as the first parameter of @h@, and the second component of @x@ and @y@ are structured into the second argument of type @[int, int]@. The flexible structure of tuples permits a simple and expressive function call syntax to work seamlessly with both single- and multiple-return-value functions, and with any number of arguments of arbitrarily complex structure.
451
452In {K-W C} \citep{Buhr94a,Till89} there were 4 tuple coercions: opening, closing, flattening, and structuring. Opening coerces a tuple value into a tuple of values, while closing converts a tuple of values into a single tuple value. Flattening coerces a nested tuple into a flat tuple, i.e. it takes a tuple with tuple components and expands it into a tuple with only non-tuple components. Structuring moves in the opposite direction, i.e. it takes a flat tuple value and provides structure by introducing nested tuple components.
453
454In \CFA{}, the design has been simplified to require only the two conversions previously described, which trigger only in function call and return situations. Specifically, the expression resolution algorithm examines all of the possible alternatives for an expression to determine the best match. In resolving a function call expression, each combination of function value and list of argument alternatives is examined. Given a particular argument list and function value, the list of argument alternatives is flattened to produce a list of non-tuple valued expressions. Then the flattened list of expressions is compared with each value in the function's parameter list. If the parameter's type is not a tuple type, then the current argument value is unified with the parameter type, and on success the next argument and parameter are examined. If the parameter's type is a tuple type, then the structuring conversion takes effect, recursively applying the parameter matching algorithm using the tuple's component types as the parameter list types. Assuming a successful unification, eventually the algorithm gets to the end of the tuple type, which causes all of the matching expressions to be consumed and structured into a tuple expression. For example, in
455\begin{lstlisting}
456int f(int, [double, int]);
457f([5, 10.2], 4);
458\end{lstlisting}
459There is only a single definition of @f@, and 3 arguments with only single interpretations. First, the argument alternative list @[5, 10.2], 4@ is flattened to produce the argument list @5, 10.2, 4@. Next, the parameter matching algorithm begins, with $P =~$@int@ and $A =~$@int@, which unifies exactly. Moving to the next parameter and argument, $P =~$@[double, int]@ and $A =~$@double@. This time, the parameter is a tuple type, so the algorithm applies recursively with $P' =~$@double@ and $A =~$@double@, which unifies exactly. Then $P' =~$@int@ and $A =~$@double@, which again unifies exactly. At this point, the end of $P'$ has been reached, so the arguments @10.2, 4@ are structured into the tuple expression @[10.2, 4]@. Finally, the end of the parameter list $P$ has also been reached, so the final expression is @f(5, [10.2, 4])@.
460
461\subsection{Member Access}
462
463At times, it is desirable to access a single component of a tuple-valued expression without creating unnecessary temporary variables to assign to. Given a tuple-valued expression @e@ and a compile-time constant integer $i$ where $0 \leq i < n$, where $n$ is the number of components in @e@, @e.i@ accesses the $i$\textsuperscript{th} component of @e@. For example,
464\begin{lstlisting}
465[int, double] x;
466[char *, int] f();
467void g(double, int);
468[int, double] * p;
469
470int y = x.0;  // access int component of x
471y = f().1;  // access int component of f
472p->0 = 5;  // access int component of tuple pointed-to by p
473g(x.1, x.0);  // rearrange x to pass to g
474double z = [x, f()].0.1;  // access second component of first component of tuple expression
475\end{lstlisting}
476As seen above, tuple-index expressions can occur on any tuple-typed expression, including tuple-returning functions, square-bracketed tuple expressions, and other tuple-index expressions, provided the retrieved component is also a tuple. This feature was proposed for {K-W C}, a precursor of \CFA{}, but never implemented \citep[p.~45]{Till89}.
477
478It is possible to access multiple fields from a single expression using a \emph{member-access tuple expression}. The result is a single tuple expression whose type is the tuple of the types of the members. For example,
479\begin{lstlisting}
480struct S { int x; double y; char * z; } s;
481s.[x, y, z];
482\end{lstlisting}
483Here, the type of @s.[x, y, z]@ is @[int, double, char *]@. A member tuple expression has the form @a.[x, y, z];@ where @a@ is an expression with type @T@, where @T@ supports member access expressions, and @x, y, z@ are all members of @T@ with types @T$_x$@, @T$_y$@, and @T$_z$@ respectively. Then the type of @a.[x, y, z]@ is @[T_x, T_y, T_z]@.
484
485Since tuple index expressions are a form of member-access expression, it is possible to use tuple-index expressions in conjunction with member tuple expressions to manually restructure a tuple (e.g. rearrange components, drop components, duplicate components, etc.):
486\begin{lstlisting}
487[int, int, long, double] x;
488void f(double, long);
489
490f(x.[0, 3]);          // f(x.0, x.3)
491x.[0, 1] = x.[1, 0];  // [x.0, x.1] = [x.1, x.0]
492[long, int, long] y = x.[2, 0, 2];
493\end{lstlisting}
494
495It is possible for a member tuple expression to contain other member access expressions:
496\begin{lstlisting}
497struct A { double i; int j; };
498struct B { int * k; short l; };
499struct C { int x; A y; B z; } v;
500v.[x, y.[i, j], z.k];
501\end{lstlisting}
502This expression is equivalent to @[v.x, [v.y.i, v.y.j], v.z.k]@. That is, the aggregate expression is effectively distributed across the tuple, which allows simple and easy access to multiple components in an aggregate, without repetition. It is guaranteed that the aggregate expression to the left of the @.@ in a member tuple expression is evaluated exactly once. As such, it is safe to use member tuple expressions on the result of a side-effecting function.
503
504\subsection{Tuple Assignment}
505
506In addition to tuple-index expressions, individual components of tuples can be accessed by a \emph{destructuring assignment} which has a tuple expression with lvalue components on its left-hand side. More generally, an assignment where the left-hand side of the assignment operator has a tuple type is called \emph{tuple assignment}. There are two kinds of tuple assignment depending on whether the right-hand side of the assignment operator has a tuple type or a non-tuple type, called \emph{multiple assignment} and \emph{mass assignment}, respectively.
507\begin{lstlisting}
508int x;
509double y;
510[int, double] z;
511[y, x] = 3.14;  // mass assignment
512[x, y] = z;     // multiple assignment
513z = 10;         // mass assignment
514z = [x, y];     // multiple assignment
515\end{lstlisting}
516Let $L_i$ for $i$ in $[0, n)$ represent each component of the flattened left side, $R_i$ represent each component of the flattened right side of a multiple assignment, and $R$ represent the right side of a mass assignment.
517
518For a multiple assignment to be valid, both tuples must have the same number of elements when flattened. Multiple assignment assigns $R_i$ to $L_i$ for each $i$.
519That is, @?=?(&$L_i$, $R_i$)@ must be a well-typed expression. In the previous example, @[x, y] = z@, @z@ is flattened into @z.0, z.1@, and the assignments @x = z.0@ and @y = z.1@ are executed.
520
521A mass assignment assigns the value $R$ to each $L_i$. For a mass assignment to be valid, @?=?(&$L_i$, $R$)@ must be a well-typed expression. This differs from C cascading assignment (e.g. @a=b=c@) in that conversions are applied to $R$ in each individual assignment, which prevents data loss from the chain of conversions that can happen during a cascading assignment. For example, @[y, x] = 3.14@ performs the assignments @y = 3.14@ and @x = 3.14@, which results in the value @3.14@ in @y@ and the value @3@ in @x@. On the other hand, the C cascading assignment @y = x = 3.14@ performs the assignments @x = 3.14@ and @y = x@, which results in the value @3@ in @x@, and as a result the value @3@ in @y@ as well.
522
523Both kinds of tuple assignment have parallel semantics, such that each value on the left side and right side is evaluated \emph{before} any assignments occur. As a result, it is possible to swap the values in two variables without explicitly creating any temporary variables or calling a function:
524\begin{lstlisting}
525int x = 10, y = 20;
526[x, y] = [y, x];
527\end{lstlisting}
528After executing this code, @x@ has the value @20@ and @y@ has the value @10@.
529
530In \CFA{}, tuple assignment is an expression where the result type is the type of the left-hand side of the assignment, as in normal assignment. That is, a tuple assignment produces the value of the left-hand side after assignment. These semantics allow cascading tuple assignment to work out naturally in any context where a tuple is permitted. These semantics are a change from the original tuple design in {K-W C} \citep{Till89}, wherein tuple assignment was a statement that allows cascading assignments as a special case. This decision wa made in an attempt to fix what was seen as a problem with assignment, wherein it can be used in many different locations, such as in function-call argument position. While permitting assignment as an expression does introduce the potential for subtle complexities, it is impossible to remove assignment expressions from \CFA{} without affecting backwards compatibility with C. Furthermore, there are situations where permitting assignment as an expression improves readability by keeping code succinct and reducing repetition, and complicating the definition of tuple assignment puts a greater cognitive burden on the user. In another language, tuple assignment as a statement could be reasonable, but it would be inconsistent for tuple assignment to be the only kind of assignment in \CFA{} that is not an expression.
531
532\subsection{Casting}
533
534In C, the cast operator is used to explicitly convert between types. In \CFA{}, the cast operator has a secondary use as type ascription. That is, a cast can be used to select the type of an expression when it is ambiguous, as in the call to an overloaded function:
535\begin{lstlisting}
536int f();     // (1)
537double f();  // (2)
538
539f();       // ambiguous - (1),(2) both equally viable
540(int)f();  // choose (2)
541\end{lstlisting}
542
543Since casting is a fundamental operation in \CFA{}, casts should be given a meaningful interpretation in the context of tuples. Taking a look at standard C provides some guidance with respect to the way casts should work with tuples:
544\begin{lstlisting}
545int f();
546void g();
547
548(void)f();  // (1)
549(int)g();  // (2)
550
551struct A { int x; };
552(struct A)f();  // (3)
553\end{lstlisting}
554In C, (1) is a valid cast, which calls @f@ and discards its result. On the other hand, (2) is invalid, because @g@ does not produce a result, so requesting an @int@ to materialize from nothing is nonsensical. Finally, (3) is also invalid, because in C casts only provide conversion between scalar types \cite{C11}. For consistency, this implies that any case wherein the number of components increases as a result of the cast is invalid, while casts which have the same or fewer number of components may be valid.
555
556Formally, a cast to tuple type is valid when $T_n \leq S_m$, where $T_n$ is the number of components in the target type and $S_m$ is the number of components in the source type, and for each $i$ in $[0, n)$, $S_i$ can be cast to $T_i$. Excess elements ($S_j$ for all $j$ in $[n, m)$) are evaluated, but their values are discarded so that they are not included in the result expression. This discarding naturally follows the way that a cast to @void@ works in C.
557
558For example, in
559\begin{lstlisting}
560  [int, int, int] f();
561  [int, [int, int], int] g();
562
563  ([int, double])f();           // (1)
564  ([int, int, int])g();         // (2)
565  ([void, [int, int]])g();      // (3)
566  ([int, int, int, int])g();    // (4)
567  ([int, [int, int, int]])g();  // (5)
568\end{lstlisting}
569
570(1) discards the last element of the return value and converts the second element to @double@. Since @int@ is effectively a 1-element tuple, (2) discards the second component of the second element of the return value of @g@. If @g@ is free of side effects, this is equivalent to @[(int)(g().0), (int)(g().1.0), (int)(g().2)]@.
571Since @void@ is effectively a 0-element tuple, (3) discards the first and third return values, which is effectively equivalent to @[(int)(g().1.0), (int)(g().1.1)]@).
572
573Note that a cast is not a function call in \CFA{}, so flattening and structuring conversions do not occur for cast expressions\footnote{User-defined conversions have been considered, but for compatibility with C and the existing use of casts as type ascription, any future design for such conversions would require more precise matching of types than allowed for function arguments and parameters.}. As such, (4) is invalid because the cast target type contains 4 components, while the source type contains only 3. Similarly, (5) is invalid because the cast @([int, int, int])(g().1)@ is invalid. That is, it is invalid to cast @[int, int]@ to @[int, int, int]@.
574
575\subsection{Polymorphism}
576
577Tuples also integrate with \CFA{} polymorphism as a special sort of generic type. Due to the implicit flattening and structuring conversions involved in argument passing, @otype@ and @dtype@ parameters are restricted to matching only with non-tuple types.
578\begin{lstlisting}
579forall(otype T, dtype U)
580void f(T x, U * y);
581
582f([5, "hello"]);
583\end{lstlisting}
584In this example, @[5, "hello"]@ is flattened, so that the argument list appears as @5, "hello"@. The argument matching algorithm binds @T@ to @int@ and @U@ to @const char@, and calls the function as normal.
585
586Tuples, however, can contain polymorphic components. For example, a plus operator can be written to add two triples of a type together.
587\begin{lstlisting}
588forall(otype T | { T ?+?(T, T); })
589[T, T, T] ?+?([T, T, T] x, [T, T, T] y) {
590  return [x.0+y.0, x.1+y.1, x.2+y.2];
591}
592[int, int, int] x;
593int i1, i2, i3;
594[i1, i2, i3] = x + ([10, 20, 30]);
595\end{lstlisting}
596
597Flattening and restructuring conversions are also applied to tuple types in polymorphic type assertions. Previously in \CFA{}, it has been assumed that assertion arguments must match the parameter type exactly, modulo polymorphic specialization (\ie{}, no implicit conversions are applied to assertion arguments). In the example below:
598\begin{lstlisting}
599int f([int, double], double);
600forall(otype T, otype U | { T f(T, U, U); })
601void g(T, U);
602g(5, 10.21);
603\end{lstlisting}
604If assertion arguments must match exactly, then the call to @g@ cannot be resolved, since the expected type of @f@ is flat, while the only @f@ in scope requires a tuple type. Since tuples are fluid, this requirement reduces the usability of tuples in polymorphic code. To ease this pain point, function parameter and return lists are flattened for the purposes of type unification, which allows the previous example to pass expression resolution.
605
606This relaxation is made possible by extending the existing thunk generation scheme, as described by Bilson \citet{Bilson03}. Now, whenever a candidate's parameter structure does not exactly match the formal parameter's structure, a thunk is generated to specialize calls to the actual function:
607\begin{lstlisting}
608int _thunk(int _p0, double _p1, double _p2) {
609  return f([_p0, _p1], _p2);
610}
611\end{lstlisting}
612Essentially, this provides flattening and structuring conversions to inferred functions, improving the compatibility of tuples and polymorphism.
613
614\subsection{Variadic Tuples}
615
616To define variadic functions, \CFA{} adds a new kind of type parameter, @ttype@. Matching against a @ttype@ parameter consumes all remaining argument components and packages them into a tuple, binding to the resulting tuple of types. In a given parameter list, there should be at most one @ttype@ parameter that must occur last, otherwise the call can never resolve, given the previous rule. This idea essentially matches normal variadic semantics, with a strong feeling of similarity to \CCeleven{} variadic templates. As such, @ttype@ variables will also be referred to as \emph{argument packs}.
617
618Like variadic templates, the main way to manipulate @ttype@ polymorphic functions is through recursion. Since nothing is known about a parameter pack by default, assertion parameters are key to doing anything meaningful. Unlike variadic templates, @ttype@ polymorphic functions can be separately compiled.
619
620For example, the C @sum@ function at the beginning of this section could be written using @ttype@ as:
621\begin{lstlisting}
622int sum(){ return 0; }        // (0)
623forall(ttype Params | { int sum(Params); })
624int sum(int x, Params rest) { // (1)
625  return x+sum(rest);
626}
627sum(10, 20, 30);
628\end{lstlisting}
629Since (0) does not accept any arguments, it is not a valid candidate function for the call @sum(10, 20, 30)@.
630In order to call (1), @10@ is matched with @x@, and the argument resolution moves on to the argument pack @rest@, which consumes the remainder of the argument list and @Params@ is bound to @[20, 30]@.
631In order to finish the resolution of @sum@, an assertion parameter which matches @int sum(int, int)@ is required.
632Like in the previous iteration, (0) is not a valid candiate, so (1) is examined with @Params@ bound to @[int]@, requiring the assertion @int sum(int)@.
633Next, (0) fails, and to satisfy (1) @Params@ is bound to @[]@, requiring an assertion @int sum()@.
634Finally, (0) matches and (1) fails, which terminates the recursion.
635Effectively, this traces as @sum(10, 20, 30)@ $\rightarrow$ @10+sum(20, 30)@ $\rightarrow$ @10+(20+sum(30))@ $\rightarrow$ @10+(20+(30+sum()))@ $\rightarrow$ @10+(20+(30+0))@.
636
637A point of note is that this version does not require any form of argument descriptor, since the \CFA{} type system keeps track of all of these details. It might be reasonable to take the @sum@ function a step further to enforce a minimum number of arguments, which could be done simply:
638\begin{lstlisting}
639int sum(int x, int y){
640  return x+y;
641}
642forall(ttype Params | { int sum(int, Params); })
643int sum(int x, int y, Params rest) {
644  return sum(x+y, rest);
645}
646sum(10, 20, 30);
647\end{lstlisting}
648
649One more iteration permits the summation of any summable type, as long as all arguments are the same type:
650\begin{lstlisting}
651trait summable(otype T) {
652  T ?+?(T, T);
653};
654forall(otype R | summable(R))
655R sum(R x, R y){
656  return x+y;
657}
658forall(otype R, ttype Params
659  | summable(R)
660  | { R sum(R, Params); })
661R sum(R x, R y, Params rest) {
662  return sum(x+y, rest);
663}
664sum(3, 10, 20, 30);
665\end{lstlisting}
666Unlike C, it is not necessary to hard code the expected type. This is naturally open to extension, in that any user-defined type with a @?+?@ operator is automatically able to be used with the @sum@ function. That is to say, the programmer who writes @sum@ does not need full program knowledge of every possible data type, unlike what is necessary to write an equivalent function using the standard C mechanisms. Summing arbitrary heterogeneous lists is possible with similar code by adding the appropriate type variables and addition operators.
667
668It is possible to write a type-safe variadic print routine, which can replace @printf@
669\begin{lstlisting}
670struct S { int x, y; };
671forall(otype T, ttype Params |
672  { void print(T); void print(Params); })
673void print(T arg, Params rest) {
674  print(arg);
675  print(rest);
676}
677void print(char * x) { printf("%s", x); }
678void print(int x) { printf("%d", x);  }
679void print(S s) { print("{ ", s.x, ",", s.y, " }"); }
680print("s = ", (S){ 1, 2 }, "\n");
681\end{lstlisting}
682This example routine showcases a variadic-template-like decomposition of the provided argument list. The individual @print@ routines allow printing a single element of a type. The polymorphic @print@ allows printing any list of types, as long as each individual type has a @print@ function. The individual print functions can be used to build up more complicated @print@ routines, such as for @S@, which is something that cannot be done with @printf@ in C.
683
684It is also possible to use @ttype@ polymorphism to provide arbitrary argument forwarding functions. For example, it is possible to write @new@ as a library function:
685\begin{lstlisting}
686struct Pair(otype R, otype S);
687forall(otype R, otype S)
688void ?{}(Pair(R, S) *, R, S);  // (1)
689
690forall(dtype T, ttype Params | sized(T) | { void ?{}(T *, Params); })
691T * new(Params p) {
692  return ((T*)malloc( sizeof(T) )){ p }; // construct into result of malloc
693}
694Pair(int, char) * x = new(42, '!');
695\end{lstlisting}
696The @new@ function provides the combination of type-safe @malloc@ with a constructor call, so that it becomes impossible to forget to construct dynamically allocated objects. This provides the type-safety of @new@ in \CC{}, without the need to specify the allocated type, thanks to return-type inference.
697
698In the call to @new@, @Pair(double, char)@ is selected to match @T@, and @Params@ is expanded to match @[double, char]@. To satisfy the assertion, a constructor with an interface compatible with @void ?{}(Pair(int, char) *, int, char)@ must exist in the current scope, which (1) may be specialized to match.
699
700\TODO{} Check if we actually can use ttype parameters on generic types (if they set the complete flag, it should work, or nearly so).
701
702\subsection{Implementation}
703
704Tuples are implemented in the \CFA{} translator via a transformation into generic types. For each $N$, the first time an $N$-tuple is seen in a scope a generic type with $N$ type parameters is generated. For example:
705\begin{lstlisting}
706[int, int] f() {
707  [double, double] x;
708  [int, double, int] y;
709}
710\end{lstlisting}
711Is transformed into:
712\begin{lstlisting}
713forall(dtype T0, dtype T1 | sized(T0) | sized(T1))
714struct _tuple2 {  // generated before the first 2-tuple
715  T0 field_0;
716  T1 field_1;
717};
718_tuple2_(int, int) f() {
719  _tuple2_(double, double) x;
720  forall(dtype T0, dtype T1, dtype T2 | sized(T0) | sized(T1) | sized(T2))
721  struct _tuple3 {  // generated before the first 3-tuple
722    T0 field_0;
723    T1 field_1;
724    T2 field_2;
725  };
726  _tuple3_(int, double, int) y;
727}
728\end{lstlisting}
729
730Tuple expressions are then simply converted directly into compound literals:
731\begin{lstlisting}
732[5, 'x', 1.24];
733\end{lstlisting}
734Becomes:
735\begin{lstlisting}
736(_tuple3_(int, char, double)){ 5, 'x', 1.24 };
737\end{lstlisting}
738
739Since tuples are essentially structures, tuple indexing expressions are just field accesses:
740\begin{lstlisting}
741void f(int, [double, char]);
742[int, double] x;
743
744x.0+x.1;
745printf("%d %g\n", x);
746f(x, 'z');
747\end{lstlisting}
748Is transformed into:
749\begin{lstlisting}
750void f(int, _tuple2_(double, char));
751_tuple2_(int, double) x;
752
753x.field_0+x.field_1;
754printf("%d %g\n", x.field_0, x.field_1);
755f(x.field_0, (_tuple2){ x.field_1, 'z' });
756\end{lstlisting}
757Note that due to flattening, @x@ used in the argument position is converted into the list of its fields. In the call to @f@, a the second and third argument components are structured into a tuple argument. Similarly, tuple member expressions are recursively expanded into a list of member access expressions.
758
759Expressions which may contain side effects are made into \emph{unique expressions} before being expanded by the flattening conversion. Each unique expression is assigned an identifier and is guaranteed to be executed exactly once:
760\begin{lstlisting}
761void g(int, double);
762[int, double] h();
763g(h());
764\end{lstlisting}
765Interally, this is converted to two variables and an expression:
766\begin{lstlisting}
767void g(int, double);
768[int, double] h();
769
770_Bool _unq0_finished_ = 0;
771[int, double] _unq0;
772g(
773  (_unq0_finished_ ? _unq0 : (_unq0 = f(), _unq0_finished_ = 1, _unq0)).0,
774  (_unq0_finished_ ? _unq0 : (_unq0 = f(), _unq0_finished_ = 1, _unq0)).1,
775);
776\end{lstlisting}
777Since argument evaluation order is not specified by the C programming language, this scheme is built to work regardless of evaluation order. The first time a unique expression is executed, the actual expression is evaluated and the accompanying boolean is true to true. Every subsequent evaluation of the unique expression then results in an access to the stored result of the actual expression. Tuple member expressions also take advantage of unique expressions in the case of possible impurity.
778
779Currently, the \CFA{} translator has a very broad, imprecise definition of impurity, where any function call is assumed to be impure. This notion could be made more precise for certain intrinsic, autogenerated, and builtin functions, and could analyze function bodies when they are available to recursively detect impurity, to eliminate some unique expressions.
780
781The various kinds of tuple assignment, constructors, and destructors generate GNU C statement expressions. A variable is generated to store the value produced by a statement expression, since its fields may need to be constructed with a non-trivial constructor and it may need to be referred to multiple time, \eg{} in a unique expression. The use of statement expressions allows the translator to arbitrarily generate additional temporary variables as needed, but binds the implementation to a non-standard extension of the C language. However, there are other places where the \CFA{} translator makes use of GNU C extensions, such as its use of nested functions, so this is not a new restriction.
782
783Type assertions in \CFA{} generally require exact matching of parameter and return types, with no implicit conversions allowed. Tuple flattening and restructuring is an exception to this, however, allowing functions to match assertions without regard to the presence of tuples; this is particularly useful for structuring trailing arguments to match a @ttype@ parameter or flattening assertions based on @ttype@ type variables to match programmer-defined functions. This relaxation is made possible by extending the existing thunk generation scheme, as described by Bilson \citet{Bilson03}. Whenever a candidate's parameter structure does not exactly match the formal parameter's structure, a thunk is generated to specialize calls to the actual function, as in this conversion from a function @f@ with signature @int (*)(int, char, char)@ to another with signature @int (*)([int, char], char)@:
784\begin{lstlisting}
785int _thunk(int _p0, char _p1, char _p2) {
786  return f([_p0, _p1], _p2);
787}
788\end{lstlisting}
789These thunks take advantage of GCC C nested functions to produce closures that have the usual function pointer signature.
790
791\section{Related Work}
792
793\TODO{} Talk about \CC{}, Cyclone, maybe D, Rust, \etc{}
794
795A major difference between the approaches of \CC{} and \CFA{} to polymorphism is that the set of assumed properties for a type is \emph{explicit} in \CFA{}. One of the major limiting factors of \CC{}'s approach is that templates cannot be separately compiled. In contrast, the explicit nature of assertions allows \CFA{}'s polymorphic functions to be separately compiled.
796
797\section{Conclusion \& Future Work}
798
799In conclusion, the authors' design for generic types and tuples imposes minimal runtime overhead while still supporting a full range of C features, including separately-compiled modules. There is ongoing work on a wide range of \CFA{} feature extensions, including reference types, exceptions, and concurent programming primitives. In addition to this work, there are some interesting future directions the polymorphism design could take. Notably, \CC{} template functions trade compile time and code bloat for optimal runtime of individual instantiations of polymorphic functions. \CFA{} polymorphic functions, by contrast, use an approach which is essentially dynamic virtual dispatch. The runtime overhead of this approach is low, but not as low as \CC{} template functions, and it may be beneficial to provide a mechanism for particularly performance-sensitive code to close this gap. Further research is needed, but two promising approaches are to allow an annotation on polymorphic function call sites that tells the translator to create a template-specialization of the function (provided the code is visible in the current translation unit) or placing an annotation on polymorphic function definitions that instantiates a version of the polymorphic function specialized to some set of types. These approaches are not mutually exclusive, and would allow these performance optimizations to be applied only where most useful to increase performance, without suffering the code bloat or loss of generality of a template expansion approach where it is unneccessary.
800
801\bibliographystyle{ACM-Reference-Format}
802\bibliography{generic_types}
803
804\end{document}
Note: See TracBrowser for help on using the repository browser.