source: benchmark/Makefile.in@ 38d12e7

ADT aaron-thesis arm-eh ast-experimental cleanup-dtors deferred_resn enum forall-pointer-decay jacob/cs343-translation jenkins-sandbox new-ast new-ast-unique-expr no_list persistent-indexer pthread-emulation qualifiedEnum stuck-waitfor-destruct
Last change on this file since 38d12e7 was 38d12e7, checked in by Thierry Delisle <tdelisle@…>, 8 years ago

Adjusted makefiles to use libtool
  • Property mode set to 100644
File size: 20.6 KB
Line 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17######################## -*- Mode: Makefile-Automake -*- ######################
18###############################################################################
19
20VPATH = @srcdir@
21am__is_gnu_make = { \
22 if test -z '$(MAKELEVEL)'; then \
23 false; \
24 elif test -n '$(MAKE_HOST)'; then \
25 true; \
26 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
27 true; \
28 else \
29 false; \
30 fi; \
31}
32am__make_running_with_option = \
33 case $${target_option-} in \
34 ?) ;; \
35 *) echo "am__make_running_with_option: internal error: invalid" \
36 "target option '$${target_option-}' specified" >&2; \
37 exit 1;; \
38 esac; \
39 has_opt=no; \
40 sane_makeflags=$$MAKEFLAGS; \
41 if $(am__is_gnu_make); then \
42 sane_makeflags=$$MFLAGS; \
43 else \
44 case $$MAKEFLAGS in \
45 *\\[\ \ ]*) \
46 bs=\\; \
47 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
48 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
49 esac; \
50 fi; \
51 skip_next=no; \
52 strip_trailopt () \
53 { \
54 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
55 }; \
56 for flg in $$sane_makeflags; do \
57 test $$skip_next = yes && { skip_next=no; continue; }; \
58 case $$flg in \
59 *=*|--*) continue;; \
60 -*I) strip_trailopt 'I'; skip_next=yes;; \
61 -*I?*) strip_trailopt 'I';; \
62 -*O) strip_trailopt 'O'; skip_next=yes;; \
63 -*O?*) strip_trailopt 'O';; \
64 -*l) strip_trailopt 'l'; skip_next=yes;; \
65 -*l?*) strip_trailopt 'l';; \
66 -[dEDm]) skip_next=yes;; \
67 -[JT]) skip_next=yes;; \
68 esac; \
69 case $$flg in \
70 *$$target_option*) has_opt=yes; break;; \
71 esac; \
72 done; \
73 test $$has_opt = yes
74am__make_dryrun = (target_option=n; $(am__make_running_with_option))
75am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
76pkgdatadir = $(datadir)/@PACKAGE@
77pkgincludedir = $(includedir)/@PACKAGE@
78pkglibdir = $(libdir)/@PACKAGE@
79pkglibexecdir = $(libexecdir)/@PACKAGE@
80am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
81install_sh_DATA = $(install_sh) -c -m 644
82install_sh_PROGRAM = $(install_sh) -c
83install_sh_SCRIPT = $(install_sh) -c
84INSTALL_HEADER = $(INSTALL_DATA)
85transform = $(program_transform_name)
86NORMAL_INSTALL = :
87PRE_INSTALL = :
88POST_INSTALL = :
89NORMAL_UNINSTALL = :
90PRE_UNINSTALL = :
91POST_UNINSTALL = :
92build_triplet = @build@
93host_triplet = @host@
94noinst_PROGRAMS =
95subdir = benchmark
96ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
97am__aclocal_m4_deps = $(top_srcdir)/automake/cfa.m4 \
98 $(top_srcdir)/configure.ac
99am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
100 $(ACLOCAL_M4)
101DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
102mkinstalldirs = $(install_sh) -d
103CONFIG_HEADER = $(top_builddir)/config.h
104CONFIG_CLEAN_FILES =
105CONFIG_CLEAN_VPATH_FILES =
106PROGRAMS = $(noinst_PROGRAMS)
107AM_V_P = $(am__v_P_@AM_V@)
108am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
109am__v_P_0 = false
110am__v_P_1 = :
111AM_V_GEN = $(am__v_GEN_@AM_V@)
112am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
113am__v_GEN_0 = @echo " GEN " $@;
114am__v_GEN_1 =
115AM_V_at = $(am__v_at_@AM_V@)
116am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
117am__v_at_0 = @
118am__v_at_1 =
119SOURCES =
120DIST_SOURCES =
121am__can_run_installinfo = \
122 case $$AM_UPDATE_INFO_DIR in \
123 n|no|NO) false;; \
124 *) (install-info --version) >/dev/null 2>&1;; \
125 esac
126am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
127am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/src/cfa.make \
128 compile
129DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
130ACLOCAL = @ACLOCAL@
131ALLOCA = @ALLOCA@
132AMTAR = @AMTAR@
133AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
134AUTOCONF = @AUTOCONF@
135AUTOHEADER = @AUTOHEADER@
136AUTOMAKE = @AUTOMAKE@
137AWK = @AWK@
138BACKEND_CC = @BACKEND_CC@
139BUILD_IN_TREE_FLAGS = @BUILD_IN_TREE_FLAGS@
140CC = @CC@
141CCAS = @CCAS@
142CCASDEPMODE = @CCASDEPMODE@
143CCASFLAGS = @CCASFLAGS@
144CCDEPMODE = @CCDEPMODE@
145CFACC = @CFACC@
146CFACPP = @CFACPP@
147CFA_BACKEND_CC = @CFA_BACKEND_CC@
148CFA_BINDIR = @CFA_BINDIR@
149CFA_FLAGS = @CFA_FLAGS@
150CFA_INCDIR = @CFA_INCDIR@
151CFA_LIBDIR = @CFA_LIBDIR@
152CFA_NAME = @CFA_NAME@
153CFA_PREFIX = @CFA_PREFIX@
154CFLAGS = @CFLAGS@
155CPP = @CPP@
156CPPFLAGS = @CPPFLAGS@
157CXX = @CXX@
158CXXDEPMODE = @CXXDEPMODE@
159CXXFLAGS = @CXXFLAGS@
160CYGPATH_W = @CYGPATH_W@
161DEFS = @DEFS@
162DEPDIR = @DEPDIR@
163DRIVER_DIR = @DRIVER_DIR@
164ECHO_C = @ECHO_C@
165ECHO_N = @ECHO_N@
166ECHO_T = @ECHO_T@
167EGREP = @EGREP@
168EXEEXT = @EXEEXT@
169GREP = @GREP@
170HOST_FLAGS = @HOST_FLAGS@
171INSTALL = @INSTALL@
172INSTALL_DATA = @INSTALL_DATA@
173INSTALL_PROGRAM = @INSTALL_PROGRAM@
174INSTALL_SCRIPT = @INSTALL_SCRIPT@
175INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
176LDFLAGS = @LDFLAGS@
177LEX = @LEX@
178LEXLIB = @LEXLIB@
179LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
180LIBCFA_TARGET_DIRS = @LIBCFA_TARGET_DIRS@
181LIBCFA_TARGET_MAKEFILES = @LIBCFA_TARGET_MAKEFILES@
182LIBOBJS = @LIBOBJS@
183LIBS = @LIBS@
184LTLIBOBJS = @LTLIBOBJS@
185MAKEINFO = @MAKEINFO@
186MKDIR_P = @MKDIR_P@
187OBJEXT = @OBJEXT@
188PACKAGE = @PACKAGE@
189PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
190PACKAGE_NAME = @PACKAGE_NAME@
191PACKAGE_STRING = @PACKAGE_STRING@
192PACKAGE_TARNAME = @PACKAGE_TARNAME@
193PACKAGE_URL = @PACKAGE_URL@
194PACKAGE_VERSION = @PACKAGE_VERSION@
195PATH_SEPARATOR = @PATH_SEPARATOR@
196RANLIB = @RANLIB@
197SET_MAKE = @SET_MAKE@
198SHELL = @SHELL@
199STRIP = @STRIP@
200TARGET_HOSTS = @TARGET_HOSTS@
201VERSION = @VERSION@
202YACC = @YACC@
203YFLAGS = @YFLAGS@
204abs_builddir = @abs_builddir@
205abs_srcdir = @abs_srcdir@
206abs_top_builddir = @abs_top_builddir@
207abs_top_srcdir = @abs_top_srcdir@
208ac_ct_CC = @ac_ct_CC@
209ac_ct_CXX = @ac_ct_CXX@
210am__include = @am__include@
211am__leading_dot = @am__leading_dot@
212am__quote = @am__quote@
213am__tar = @am__tar@
214am__untar = @am__untar@
215bindir = @bindir@
216build = @build@
217build_alias = @build_alias@
218build_cpu = @build_cpu@
219build_os = @build_os@
220build_vendor = @build_vendor@
221builddir = @builddir@
222datadir = @datadir@
223datarootdir = @datarootdir@
224docdir = @docdir@
225dvidir = @dvidir@
226exec_prefix = @exec_prefix@
227host = @host@
228host_alias = @host_alias@
229host_cpu = @host_cpu@
230host_os = @host_os@
231host_vendor = @host_vendor@
232htmldir = @htmldir@
233includedir = @includedir@
234infodir = @infodir@
235install_sh = @install_sh@
236libdir = @libdir@
237libexecdir = @libexecdir@
238localedir = @localedir@
239localstatedir = @localstatedir@
240mandir = @mandir@
241mkdir_p = @mkdir_p@
242oldincludedir = @oldincludedir@
243pdfdir = @pdfdir@
244prefix = @prefix@
245program_transform_name = @program_transform_name@
246psdir = @psdir@
247runstatedir = @runstatedir@
248sbindir = @sbindir@
249sharedstatedir = @sharedstatedir@
250srcdir = @srcdir@
251sysconfdir = @sysconfdir@
252target_alias = @target_alias@
253top_build_prefix = @top_build_prefix@
254top_builddir = @top_builddir@
255top_srcdir = @top_srcdir@
256AUTOMAKE_OPTIONS = foreign # do not require all the GNU file names
257CFACOMPILE = $(CFACC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CFAFLAGS) $(CFAFLAGS) $(AM_CFLAGS) $(CFLAGS)
258LTCFACOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
259 $(LIBTOOLFLAGS) --mode=compile $(CFACC) $(DEFS) \
260 $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CFAFLAGS) $(CFAFLAGS) \
261 $(AM_CFLAGS) $(CFLAGS)
262
263AM_V_CFA = $(am__v_CFA_@AM_V@)
264am__v_CFA_ = $(am__v_CFA_@AM_DEFAULT_V@)
265am__v_CFA_0 = @echo " CFA " $@;
266am__v_CFA_1 =
267
268# applies to both programs
269UPPCOMPILE = $(UPPCC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_UPPFLAGS) $(UPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_CFLAGS) $(CFLAGS)
270AM_CFLAGS = -O2 -Wall -I$(srcdir) -lrt -pthread
271AM_CFAFLAGS = -quiet -in-tree -nodebug
272AM_UPPFLAGS = -quiet -nodebug -multi
273TOOLSDIR = ${abs_top_srcdir}/tools/
274REPEAT = ${TOOLSDIR}repeat
275STATS = ${TOOLSDIR}stat.py
276repeats = 30
277skipcompile = no
278TIME_FORMAT = "%E"
279PRINT_FORMAT = %20s: #Comments needed for spacing
280testdir = $(top_srcdir)/tests
281all: all-am
282
283.SUFFIXES:
284.SUFFIXES: .cfa .lo .o
285$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/src/cfa.make $(am__configure_deps)
286 @for dep in $?; do \
287 case '$(am__configure_deps)' in \
288 *$$dep*) \
289 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
290 && { if test -f $@; then exit 0; else break; fi; }; \
291 exit 1;; \
292 esac; \
293 done; \
294 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign benchmark/Makefile'; \
295 $(am__cd) $(top_srcdir) && \
296 $(AUTOMAKE) --foreign benchmark/Makefile
297Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
298 @case '$?' in \
299 *config.status*) \
300 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
301 *) \
302 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
303 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
304 esac;
305$(top_srcdir)/src/cfa.make $(am__empty):
306
307$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
308 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
309
310$(top_srcdir)/configure: $(am__configure_deps)
311 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
312$(ACLOCAL_M4): $(am__aclocal_m4_deps)
313 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
314$(am__aclocal_m4_deps):
315
316clean-noinstPROGRAMS:
317 -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
318tags TAGS:
319
320ctags CTAGS:
321
322cscope cscopelist:
323
324
325distdir: $(DISTFILES)
326 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
327 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
328 list='$(DISTFILES)'; \
329 dist_files=`for file in $$list; do echo $$file; done | \
330 sed -e "s|^$$srcdirstrip/||;t" \
331 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
332 case $$dist_files in \
333 */*) $(MKDIR_P) `echo "$$dist_files" | \
334 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
335 sort -u` ;; \
336 esac; \
337 for file in $$dist_files; do \
338 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
339 if test -d $$d/$$file; then \
340 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
341 if test -d "$(distdir)/$$file"; then \
342 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
343 fi; \
344 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
345 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
346 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
347 fi; \
348 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
349 else \
350 test -f "$(distdir)/$$file" \
351 || cp -p $$d/$$file "$(distdir)/$$file" \
352 || exit 1; \
353 fi; \
354 done
355check-am: all-am
356check: check-am
357all-am: Makefile $(PROGRAMS)
358installdirs:
359install: install-am
360install-exec: install-exec-am
361install-data: install-data-am
362uninstall: uninstall-am
363
364install-am: all-am
365 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
366
367installcheck: installcheck-am
368install-strip:
369 if test -z '$(STRIP)'; then \
370 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
371 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
372 install; \
373 else \
374 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
375 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
376 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
377 fi
378mostlyclean-generic:
379
380clean-generic:
381
382distclean-generic:
383 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
384 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
385
386maintainer-clean-generic:
387 @echo "This command is intended for maintainers to use"
388 @echo "it deletes files that may require special tools to rebuild."
389clean: clean-am
390
391clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am
392
393distclean: distclean-am
394 -rm -f Makefile
395distclean-am: clean-am distclean-generic
396
397dvi: dvi-am
398
399dvi-am:
400
401html: html-am
402
403html-am:
404
405info: info-am
406
407info-am:
408
409install-data-am:
410
411install-dvi: install-dvi-am
412
413install-dvi-am:
414
415install-exec-am:
416
417install-html: install-html-am
418
419install-html-am:
420
421install-info: install-info-am
422
423install-info-am:
424
425install-man:
426
427install-pdf: install-pdf-am
428
429install-pdf-am:
430
431install-ps: install-ps-am
432
433install-ps-am:
434
435installcheck-am:
436
437maintainer-clean: maintainer-clean-am
438 -rm -f Makefile
439maintainer-clean-am: distclean-am maintainer-clean-generic
440
441mostlyclean: mostlyclean-am
442
443mostlyclean-am: mostlyclean-generic
444
445pdf: pdf-am
446
447pdf-am:
448
449ps: ps-am
450
451ps-am:
452
453uninstall-am:
454
455.MAKE: install-am install-strip
456
457.PHONY: all all-am check check-am clean clean-generic \
458 clean-noinstPROGRAMS cscopelist-am ctags-am distclean \
459 distclean-generic distdir dvi dvi-am html html-am info info-am \
460 install install-am install-data install-data-am install-dvi \
461 install-dvi-am install-exec install-exec-am install-html \
462 install-html-am install-info install-info-am install-man \
463 install-pdf install-pdf-am install-ps install-ps-am \
464 install-strip installcheck installcheck-am installdirs \
465 maintainer-clean maintainer-clean-generic mostlyclean \
466 mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \
467 uninstall-am
468
469.PRECIOUS: Makefile
470
471
472.cfa.o: $(CFACC) $(CFACPP)
473 $(AM_V_CFA)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
474 $(CFACOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
475 $(am__mv) $$depbase.Tpo $$depbase.Po
476
477.cfa.lo:
478 $(AM_V_CFA)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
479 $(LTCFACOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
480 $(am__mv) $$depbase.Tpo $$depbase.Plo
481
482LIBFIBRE_DIR ?= /home/tdelisle/software/KOS/src/
483
484.NOTPARALLEL:
485
486all : ctxswitch$(EXEEXT) mutex$(EXEEXT) signal$(EXEEXT) waitfor$(EXEEXT) creation$(EXEEXT)
487
488%.run : %$(EXEEXT) ${REPEAT}
489 @rm -f .result.log
490 @echo "------------------------------------------------------"
491 @echo $<
492 @${REPEAT} ${repeats} ./a.out | tee -a .result.log
493 @${STATS} .result.log
494 @echo "------------------------------------------------------"
495 @rm -f a.out .result.log
496
497%.runquiet :
498 @+make $(basename $@) CFLAGS="-w"
499 @taskset -c 1 ./a.out
500 @rm -f a.out
501
502%.make :
503 @printf "${PRINT_FORMAT}" $(basename $(subst compile-,,$@))
504 @+/usr/bin/time -f ${TIME_FORMAT} make $(basename $@) 2>&1
505
506${REPEAT} :
507 @+make -C ${TOOLSDIR} repeat
508
509jenkins$(EXEEXT):
510 @echo "{"
511 @echo -e '\t"githash": "'${githash}'",'
512 @echo -e '\t"arch": "' ${arch} '",'
513@DOifskipcompile@
514 @echo -e '\t"compile": {'
515 @+make compile TIME_FORMAT='%e,' PRINT_FORMAT='\t\t\"%s\" :'
516 @echo -e '\t\t"dummy" : {}'
517 @echo -e '\t},'
518@DOendif@
519 @echo -e '\t"ctxswitch": {'
520 @echo -en '\t\t"coroutine":'
521 @+make ctxswitch-cfa_coroutine.runquiet
522 @echo -en '\t\t,"thread":'
523 @+make ctxswitch-cfa_thread.runquiet
524 @echo -e '\t},'
525 @echo -e '\t"mutex": ['
526 @echo -en '\t\t'
527 @+make mutex-cfa1.runquiet
528 @echo -en '\t\t,'
529 @+make mutex-cfa2.runquiet
530 @echo -e '\t],'
531 @echo -e '\t"scheduling": ['
532 @echo -en '\t\t'
533 @+make signal-cfa1.runquiet
534 @echo -en '\t\t,'
535 @+make signal-cfa2.runquiet
536 @echo -en '\t\t,'
537 @+make waitfor-cfa1.runquiet
538 @echo -en '\t\t,'
539 @+make waitfor-cfa2.runquiet
540 @echo -e '\n\t],'
541 @echo -e '\t"epoch": ' $(shell date +%s)
542 @echo "}"
543
544loop$(EXEEXT):
545 $(COMPILE) -DBENCH_N=5000000000 loop.c
546
547function$(EXEEXT):
548 $(COMPILE) -DBENCH_N=5000000000 function.c
549
550fetch_add$(EXEEXT):
551 $(COMPILE) -DBENCH_N=500000000 fetch_add.c
552
553ctxswitch$(EXEEXT): \
554 loop.run \
555 function.run \
556 fetch_add.run \
557 ctxswitch-pthread.run \
558 ctxswitch-cfa_coroutine.run \
559 ctxswitch-cfa_thread.run \
560 ctxswitch-cfa_thread2.run \
561 ctxswitch-upp_coroutine.run \
562 ctxswitch-upp_thread.run \
563 -ctxswitch-kos_fibre.run \
564 -ctxswitch-kos_fibre2.run \
565 ctxswitch-goroutine.run \
566 ctxswitch-java_thread.run
567
568ctxswitch-pthread$(EXEEXT):
569 @$(COMPILE) -DBENCH_N=50000000 $(srcdir)/ctxswitch/pthreads.c
570
571ctxswitch-cfa_coroutine$(EXEEXT):
572 @$(CFACOMPILE) -DBENCH_N=50000000 $(srcdir)/ctxswitch/cfa_cor.c
573
574ctxswitch-cfa_thread$(EXEEXT):
575 @$(CFACOMPILE) -DBENCH_N=50000000 $(srcdir)/ctxswitch/cfa_thrd.c
576
577ctxswitch-cfa_thread2$(EXEEXT):
578 @$(CFACOMPILE) -DBENCH_N=50000000 $(srcdir)/ctxswitch/cfa_thrd2.c
579
580ctxswitch-upp_coroutine$(EXEEXT):
581 @$(UPPCOMPILE) -DBENCH_N=50000000 $(srcdir)/ctxswitch/upp_cor.cc
582
583ctxswitch-upp_thread$(EXEEXT):
584 @$(UPPCOMPILE) -DBENCH_N=50000000 $(srcdir)/ctxswitch/upp_thrd.cc
585
586ctxswitch-kos_fibre$(EXEEXT):
587 @$(CXXCOMPILE) -DBENCH_N=50000000 $(srcdir)/ctxswitch/kos_fibre.cpp -I$(LIBFIBRE_DIR) -lfibre
588
589ctxswitch-kos_fibre2$(EXEEXT):
590 @$(CXXCOMPILE) -DBENCH_N=50000000 $(srcdir)/ctxswitch/kos_fibre2.cpp -I$(LIBFIBRE_DIR) -lfibre
591
592ctxswitch-goroutine$(EXEEXT):
593 @go build -o a.out $(srcdir)/ctxswitch/goroutine.go
594
595ctxswitch-java_thread$(EXEEXT):
596 @javac $(srcdir)/ctxswitch/JavaThread.java
597 @echo "#!/bin/sh" > a.out
598 @echo "cd ctxswitch && java JavaThread" >> a.out
599 @chmod a+x a.out
600
601mutex$(EXEEXT) :\
602 loop.run \
603 function.run \
604 fetch_add.run \
605 mutex-pthread_lock.run \
606 mutex-upp.run \
607 mutex-cfa1.run \
608 mutex-cfa2.run \
609 mutex-cfa4.run \
610 mutex-java_thread.run
611
612mutex-pthread_lock$(EXEEXT):
613 @$(COMPILE) -DBENCH_N=50000000 $(srcdir)/mutex/pthreads.c
614
615mutex-upp$(EXEEXT):
616 @$(UPPCOMPILE) -DBENCH_N=50000000 $(srcdir)/mutex/upp.cc
617
618mutex-cfa1$(EXEEXT):
619 @$(CFACOMPILE) -DBENCH_N=5000000 $(srcdir)/mutex/cfa1.c
620
621mutex-cfa2$(EXEEXT):
622 @$(CFACOMPILE) -DBENCH_N=5000000 $(srcdir)/mutex/cfa2.c
623
624mutex-cfa4$(EXEEXT):
625 @$(CFACOMPILE) -DBENCH_N=5000000 $(srcdir)/mutex/cfa4.c
626
627mutex-java_thread$(EXEEXT):
628 @javac $(srcdir)/mutex/JavaThread.java
629 @echo "#!/bin/sh" > a.out
630 @echo "cd mutex && java JavaThread" >> a.out
631 @chmod a+x a.out
632
633signal$(EXEEXT) :\
634 signal-pthread_cond.run \
635 signal-upp.run \
636 signal-cfa1.run \
637 signal-cfa2.run \
638 signal-cfa4.run \
639 signal-java_thread.run
640
641signal-pthread_cond$(EXEEXT):
642 @$(COMPILE) -DBENCH_N=500000 $(srcdir)/schedint/pthreads.c
643
644signal-upp$(EXEEXT):
645 @$(UPPCOMPILE) -DBENCH_N=5000000 $(srcdir)/schedint/upp.cc
646
647signal-cfa1$(EXEEXT):
648 @$(CFACOMPILE) -DBENCH_N=500000 $(srcdir)/schedint/cfa1.c
649
650signal-cfa2$(EXEEXT):
651 @$(CFACOMPILE) -DBENCH_N=500000 $(srcdir)/schedint/cfa2.c
652
653signal-cfa4$(EXEEXT):
654 @$(CFACOMPILE) -DBENCH_N=500000 $(srcdir)/schedint/cfa4.c
655
656signal-java_thread$(EXEEXT):
657 @javac $(srcdir)/schedint/JavaThread.java
658 @echo "#!/bin/sh" > a.out
659 @echo "cd schedint && java JavaThread" >> a.out
660 @chmod a+x a.out
661
662waitfor$(EXEEXT) :\
663 waitfor-upp.run \
664 waitfor-cfa1.run \
665 waitfor-cfa2.run \
666 waitfor-cfa4.run
667
668waitfor-upp$(EXEEXT):
669 @$(UPPCOMPILE) -DBENCH_N=5000000 $(srcdir)/schedext/upp.cc
670
671waitfor-cfa1$(EXEEXT):
672 @$(CFACOMPILE) -DBENCH_N=500000 $(srcdir)/schedext/cfa1.c
673
674waitfor-cfa2$(EXEEXT):
675 @$(CFACOMPILE) -DBENCH_N=500000 $(srcdir)/schedext/cfa2.c
676
677waitfor-cfa4$(EXEEXT):
678 @$(CFACOMPILE) -DBENCH_N=500000 $(srcdir)/schedext/cfa4.c
679
680creation$(EXEEXT) :\
681 creation-pthread.run \
682 creation-cfa_coroutine.run \
683 creation-cfa_coroutine_eager.run \
684 creation-cfa_thread.run \
685 creation-upp_coroutine.run \
686 creation-upp_thread.run \
687 creation-goroutine.run \
688 creation-java_thread.run
689
690creation-cfa_coroutine$(EXEEXT):
691 @$(CFACOMPILE) -DBENCH_N=10000000 $(srcdir)/creation/cfa_cor.c
692
693creation-cfa_coroutine_eager$(EXEEXT):
694 @$(CFACOMPILE) -DBENCH_N=10000000 $(srcdir)/creation/cfa_cor.c
695
696creation-cfa_thread$(EXEEXT):
697 @$(CFACOMPILE) -DBENCH_N=10000000 $(srcdir)/creation/cfa_thrd.c
698
699creation-upp_coroutine$(EXEEXT):
700 @$(UPPCOMPILE) -DBENCH_N=50000000 $(srcdir)/creation/upp_cor.cc
701
702creation-upp_thread$(EXEEXT):
703 @$(UPPCOMPILE) -DBENCH_N=50000000 $(srcdir)/creation/upp_thrd.cc
704
705creation-pthread$(EXEEXT):
706 @$(COMPILE) -DBENCH_N=250000 $(srcdir)/creation/pthreads.c
707
708creation-goroutine$(EXEEXT):
709 @go build -o a.out $(srcdir)/creation/goroutine.go
710
711creation-java_thread$(EXEEXT):
712 @javac $(srcdir)/creation/JavaThread.java
713 @echo "#!/bin/sh" > a.out
714 @echo "cd creation && java JavaThread" >> a.out
715 @chmod a+x a.out
716
717compile$(EXEEXT) :\
718 compile-array.make \
719 compile-attributes.make \
720 compile-empty.make \
721 compile-expression.make \
722 compile-io.make \
723 compile-monitor.make \
724 compile-operators.make \
725 compile-typeof.make
726
727compile-array$(EXEEXT):
728 @$(CFACOMPILE) -fsyntax-only -w $(testdir)/array.c
729
730compile-attributes$(EXEEXT):
731 @$(CFACOMPILE) -fsyntax-only -w $(testdir)/attributes.c
732
733compile-empty$(EXEEXT):
734 @$(CFACOMPILE) -fsyntax-only -w $(srcdir)/compile/empty.c
735
736compile-expression$(EXEEXT):
737 @$(CFACOMPILE) -fsyntax-only -w $(testdir)/expression.c
738
739compile-io$(EXEEXT):
740 @$(CFACOMPILE) -fsyntax-only -w $(testdir)/io1.c
741
742compile-monitor$(EXEEXT):
743 @$(CFACOMPILE) -fsyntax-only -w $(testdir)/concurrent/monitor.c
744
745compile-operators$(EXEEXT):
746 @$(CFACOMPILE) -fsyntax-only -w $(testdir)/operators.c
747
748compile-thread$(EXEEXT):
749 @$(CFACOMPILE) -fsyntax-only -w $(testdir)/concurrent/thread.c
750
751compile-typeof$(EXEEXT):
752 @$(CFACOMPILE) -fsyntax-only -w $(testdir)/typeof.c
753
754# Tell versions [3.59,3.63) of GNU make to not export all variables.
755# Otherwise a system limit (for SysV at least) may be exceeded.
756.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.