source: Jenkinsfile @ 00c32e9

ADTaaron-thesisarm-ehast-experimentalcleanup-dtorsctordeferred_resndemanglerenumforall-pointer-decayjacob/cs343-translationjenkins-sandboxmemorynew-astnew-ast-unique-exprnew-envno_listpersistent-indexerpthread-emulationqualifiedEnumresolv-newwith_gc
Last change on this file since 00c32e9 was b94206b, checked in by Thierry Delisle <tdelisle@…>, 8 years ago

added some debugging messages to jenkins file, full build now starts 2 builds in parallel

  • Property mode set to 100644
File size: 8.0 KB
RevLine 
[a63ad80]1#!groovy
2
[29f4fe62]3//===========================================================================================================
[6003581]4// Main compilation routines
[29f4fe62]5//===========================================================================================================
6//Compilation script is done here but environnement set-up and error handling is done in main loop
[c0588909]7def cfa_build(boolean full_build, String flags) {
[77f347d]8        build_stage 'Checkout'
[992c26d]9                def install_dir = pwd tmp: true
[77f347d]10                //checkout the source code and clean the repo
[3151e3b]11                checkout scm
[56a9ce6]12
13                //Clean all temporary files to make sure no artifacts of the previous build remain
[01b8088d]14                sh 'git clean -fdqx'
[56a9ce6]15
16                //Reset the git repo so no local changes persist
[01b8088d]17                sh 'git reset --hard'
[23a14d86]18
[77f347d]19        build_stage 'Build'
[7aebc62]20
[77f347d]21                //Configure the conpilation (Output is not relevant)
22                //Use the current directory as the installation target so nothing
23                //escapes the sandbox
24                //Also specify the compiler by hand
[c0588909]25                sh "./configure CXX=${currentCC.cpp_cc} CXXFLAGS=${flags} CFAFLAGS=${flags} --with-backend-compiler=${currentCC.cfa_backend_cc} --prefix=${install_dir} --enable-silent-rules --quiet"
[fde808df]26
[77f347d]27                //Compile the project
[245510f]28                sh 'make -j 8 --no-print-directory V=0 install'
[fde808df]29
[77f347d]30        build_stage 'Test'
[fde808df]31
[cb64fd6]32                //Run the tests from the tests directory
[fd61a4f]33                dir ('src/tests') {
[7ef1555e]34                        if (full_build) {
[b015035]35                                sh 'make all-tests'
[7ef1555e]36                        }
37                        else {
[b015035]38                                sh 'make'
[7ef1555e]39                        }
[77f347d]40                }
[fde808df]41
[77f347d]42        build_stage 'Cleanup'
[7359098]43
[86f641b]44                //do a maintainer-clean to make sure we need to remake from scratch
45                sh 'make maintainer-clean > /dev/null'
[77f347d]46}
[7359098]47
[738cf8f]48def make_doc() {
49        def err = null
50
51        try {
52                sh 'make clean > /dev/null'
53                sh 'make > /dev/null 2>&1'
54        }
55
56        catch (Exception caughtError) {
57                //rethrow error later
58                err = caughtError
59
60                sh 'cat *.log'
61        }
62
63        finally {
64                /* Must re-throw exception to propagate error */
65                if (err) {
66                        throw err
67                }
68        }
69}
70
[18e2758]71def doc_build() {
[fa234ef]72        stage 'Documentation'
73
74                status_prefix = 'Documentation'
[18e2758]75
76                dir ('doc/user') {
[738cf8f]77                        make_doc()
[18e2758]78                }
79
80                dir ('doc/refrat') {
[738cf8f]81                        make_doc()
[18e2758]82                }
83}
84
[29f4fe62]85//===========================================================================================================
86// Helper classes/variables/routines to make the status and stage name easier to use
87//===========================================================================================================
[e730560]88//Description of a compiler (Must be serializable since pipelines are persistent)
89class CC_Desc implements Serializable {
[8f6b229]90        public String cc_name
91        public String cpp_cc
92        public String cfa_backend_cc
[f25bcb6]93
94        CC_Desc(String cc_name, String cpp_cc, String cfa_backend_cc) {
95                this.cc_name = cc_name
96                this.cpp_cc = cpp_cc
97                this.cfa_backend_cc = cfa_backend_cc
98        }
[992c26d]99}
100
[29f4fe62]101//Global Variables defining the compiler and at which point in the build we are
[aec9a67]102// These variables are used but can't be declared before hand because of wierd scripting rules
103// @Field String currentCC
104// @Field String status_prefix
[fde808df]105
[29f4fe62]106//Wrapper to sync stage name and status name
[77f347d]107def build_stage(String name) {
[8f6b229]108        def stage_name = "${currentCC.cc_name} ${name}".trim()
[77f347d]109        stage stage_name
[fde808df]110
[77f347d]111                status_prefix = stage_name
112}
[fde808df]113
[ab60d6d]114//Helper routine to collect information about the git history
115def collect_git_info() {
116
[abc26975]117        //create the temporary output directory in case it doesn't already exist
[ab60d6d]118        def out_dir = pwd tmp: true
[abc26975]119        sh "mkdir -p ${out_dir}"
120
121        //parse git logs to find what changed
[ab60d6d]122        gitRefName = env.BRANCH_NAME
123        dir("../${gitRefName}@script") {
124                sh "git reflog > ${out_dir}/GIT_COMMIT"
125        }
126        git_reflog = readFile("${out_dir}/GIT_COMMIT")
127        gitRefOldValue = (git_reflog =~ /moving from (.+) to (.+)/)[0][1]
128        gitRefNewValue = (git_reflog =~ /moving from (.+) to (.+)/)[0][2]
129}
130
[29f4fe62]131//===========================================================================================================
132// Main loop of the compilation
133//===========================================================================================================
[77f347d]134node ('master'){
[fde808df]135
[a3e1f8f]136        boolean bIsFullBuild
[77f347d]137        def err = null
138        def log_needed = false
[ab60d6d]139        currentBuild.result = "SUCCESS"
[c7449ce2]140        status_prefix = ''
[77f347d]141
142        try {
[0207e71]143                //Prevent the build from exceeding 30 minutes
[18e2758]144                timeout(60) {
[40b1df9]145
[37bf576]146                        //Wrap build to add timestamp to command line
147                        wrap([$class: 'TimestamperBuildWrapper']) {
[29f4fe62]148
[7b1a604]149                                collect_git_info()
150
[9e5f409]151                                properties ([                                                                   \
152                                        [$class: 'ParametersDefinitionProperty',                                \
153                                                parameterDefinitions: [                                         \
154                                                [$class: 'BooleanParameterDefinition',                          \
155                                                  defaultValue: false,                                          \
156                                                  description: 'If true, the build will be promoted to the do-lang git repository (on successful builds only)', \
[6003581]157                                                  name: 'isFullBuild'                                   \
[c617272]158                                                ],                                                              \
[e66ef08]159                                                [$class: 'ChoiceParameterDefinition',                           \
[1e94036a]160                                                  choices: '64-bit\n32-bit',                                    \
[24eecab]161                                                  defaultValue: '64-bit',                                       \
[1b6a23e]162                                                  description: 'The architecture to use for compilation',       \
163                                                  name: 'buildArchitecture'                                     \
[c13d970]164                                                ]]                                                              \
[9e5f409]165                                        ]])
166
[a3e1f8f]167                                bIsFullBuild = isFullBuild == 'true'
[e66ef08]168                                architectureFlag = buildArchitecture == '64-bit' ? '-m64' : (buildArchitecture == '32-bit' ? '-m32' : 'ERROR')
[24eecab]169
[ccd5b12]170                                echo "FULL BUILD = ${isFullBuild}\nArchitecture = ${buildArchitecture} (flag ${architectureFlag})"
[9e5f409]171
[29f4fe62]172                                //Compile using gcc-4.9
[f979c4a]173                                currentCC = new CC_Desc('gcc-4.9', 'g++-4.9', 'gcc-4.9')
[a3e1f8f]174                                cfa_build(bIsFullBuild, architectureFlag)
[29f4fe62]175
[d56c05d0]176                                //Compile latex documentation
177                                doc_build()
178
[a3e1f8f]179                                if( bIsFullBuild ) {
[b015035]180                                        //Compile using gcc-5
181                                        currentCC = new CC_Desc('gcc-5', 'g++-5', 'gcc-5')
[c0588909]182                                        cfa_build(true, architectureFlag)
[40b1df9]183
[b015035]184                                        //Compile using gcc-4.9
185                                        currentCC = new CC_Desc('gcc-6', 'g++-6', 'gcc-6')
[c0588909]186                                        cfa_build(true, architectureFlag)
[a235d09]187                                }
[37bf576]188                        }
[0207e71]189                }
[f43a200]190        }
191
[29f4fe62]192        //If an exception is caught we need to change the status and remember to
193        //attach the build log to the email
[fde808df]194        catch (Exception caughtError) {
[29f4fe62]195                //rethrow error later
[fde808df]196                err = caughtError
[29f4fe62]197
198                //An error has occured, the build log is relevent
[b287f67]199                log_needed = true
[29f4fe62]200
201                //Store the result of the build log
[992c26d]202                currentBuild.result = "${status_prefix} FAILURE".trim()
[fde808df]203        }
204
205        finally {
[b94206b]206                echo 'Build Completed'
207
[a3e1f8f]208                //Send email with final results if this is not a full build
209                if( !bIsFullBuild ) {
[b94206b]210                        echo 'Notifying users of result'
[a3e1f8f]211                        email(currentBuild.result, log_needed)
212                }
[fde808df]213
214                /* Must re-throw exception to propagate error */
215                if (err) {
216                        throw err
217                }
[d3d0069]218        }
[7aebc62]219}
[f2b977a]220
[29f4fe62]221//===========================================================================================================
222//Routine responsible of sending the email notification once the build is completed
223//===========================================================================================================
[a235d09]224//Standard build email notification
[19ad15b]225def email(String status, boolean log) {
[e8a22a7]226        //Since tokenizer doesn't work, figure stuff out from the environnement variables and command line
227        //Configurations for email format
228        def project_name = (env.JOB_NAME =~ /(.+)\/.+/)[0][1].toLowerCase()
229
[0a346e5]230        def gitLog = 'Error retrieving git logs'
231        def gitDiff = 'Error retrieving git diff'
[7b1a604]232
[0a346e5]233        try {
234
235                sh "git rev-list --format=short ${gitRefOldValue}...${gitRefNewValue} > GIT_LOG"
236                gitLog = readFile('GIT_LOG')
237
238                sh "git diff --stat ${gitRefNewValue} ${gitRefOldValue} > GIT_DIFF"
239                gitDiff = readFile('GIT_DIFF')
240        }
241        catch (Exception error) {}
[7b1a604]242
[992c26d]243        def email_subject = "[${project_name} git][BUILD# ${env.BUILD_NUMBER} - ${status}] - branch ${env.BRANCH_NAME}"
[848fb00]244        def email_body = """This is an automated email from the Jenkins build machine. It was
245generated because of a git hooks/post-receive script following
246a ref change was pushed to the repository containing
247the project "UNNAMED PROJECT".
[e8a22a7]248
[848fb00]249The branch ${env.BRANCH_NAME} has been updated.
[a235d09]250   via  ${gitRefOldValue} (commit)
251  from  ${gitRefNewValue} (commit)
[7b1a604]252
253Check console output at ${env.BUILD_URL} to view the results.
254
255- Status --------------------------------------------------------------
256
257BUILD# ${env.BUILD_NUMBER} - ${status}
[e8a22a7]258
[7b1a604]259- Log -----------------------------------------------------------------
260${gitLog}
261-----------------------------------------------------------------------
262Summary of changes:
263${gitDiff}
264"""
[e8a22a7]265
[a6b7480]266        def email_to = "pabuhr@uwaterloo.ca, rschlunt@uwaterloo.ca, a3moss@uwaterloo.ca, tdelisle@uwaterloo.ca, brice.dobry@huawei.com"
[e8a22a7]267
268        //send email notification
[1e34653]269        emailext body: email_body, subject: email_subject, to: email_to, attachLog: log
[e8a22a7]270}
Note: See TracBrowser for help on using the repository browser.